-
-
Save prologic/39c9365994e4e98a7371 to your computer and use it in GitHub Desktop.
created by https://github.com/tr3buchet/gister
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 6.4 2015-06-04 r4109 [x86_64-linux-3.12.24] (local build) | |
| Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: HGST Deskstar NAS | |
| Device Model: HGST HDN724030ALE640 | |
| Serial Number: PK1A34PBK88YRS | |
| LU WWN Device Id: 5 000cca 23dee0b1c | |
| Firmware Version: MJ8OA5E0 | |
| User Capacity: 3,000,592,982,016 bytes [3.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 7200 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS T13/1699-D revision 4 | |
| SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) | |
| Local Time is: Sat Aug 22 10:28:33 2015 AEST | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x82) Offline data collection activity | |
| was completed without error. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 25) The self-test routine was aborted by | |
| the host. | |
| Total time to complete Offline | |
| data collection: ( 24) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 454) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 | |
| 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 81 | |
| 3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 449 | |
| 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 5 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 | |
| 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 | |
| 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3497 | |
| 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 150 | |
| 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 150 | |
| 194 Temperature_Celsius 0x0002 162 162 000 Old_age Always - 37 (Min/Max 25/43) | |
| 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 11 | |
| SMART Error Log Version: 1 | |
| ATA Error Count: 11 (device log contains only the most recent five errors) | |
| CR = Command Register [HEX] | |
| FR = Features Register [HEX] | |
| SC = Sector Count Register [HEX] | |
| SN = Sector Number Register [HEX] | |
| CL = Cylinder Low Register [HEX] | |
| CH = Cylinder High Register [HEX] | |
| DH = Device/Head Register [HEX] | |
| DC = Device Command Register [HEX] | |
| ER = Error register [HEX] | |
| ST = Status register [HEX] | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 11 occurred at disk power-on lifetime: 3497 hours (145 days + 17 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 51 01 57 e7 56 0d Error: ICRC, ABRT at LBA = 0x0d56e757 = 223799127 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 20 d8 38 e7 56 40 00 2d+18:56:01.762 READ FPDMA QUEUED | |
| 60 20 d0 18 e7 56 40 00 2d+18:56:01.762 READ FPDMA QUEUED | |
| 60 20 c8 f0 e6 56 40 00 2d+18:56:01.762 READ FPDMA QUEUED | |
| 60 20 c0 d0 e6 56 40 00 2d+18:56:01.762 READ FPDMA QUEUED | |
| 60 20 b8 b0 e6 56 40 00 2d+18:56:01.762 READ FPDMA QUEUED | |
| Error 10 occurred at disk power-on lifetime: 3497 hours (145 days + 17 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 51 11 17 e5 28 0d Error: ICRC, ABRT at LBA = 0x0d28e517 = 220783895 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 20 60 08 e5 28 40 00 2d+18:55:44.366 READ FPDMA QUEUED | |
| 60 20 58 e8 e4 28 40 00 2d+18:55:44.366 READ FPDMA QUEUED | |
| 60 20 50 c8 e4 28 40 00 2d+18:55:44.366 READ FPDMA QUEUED | |
| 60 20 48 a0 e4 28 40 00 2d+18:55:44.366 READ FPDMA QUEUED | |
| 60 20 40 80 e4 28 40 00 2d+18:55:44.366 READ FPDMA QUEUED | |
| Error 9 occurred at disk power-on lifetime: 3497 hours (145 days + 17 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 51 99 ff 57 a4 09 Error: ICRC, ABRT at LBA = 0x09a457ff = 161765375 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 e8 e8 b0 57 a4 40 00 2d+18:49:25.424 READ FPDMA QUEUED | |
| 60 d0 e0 38 57 a4 40 00 2d+18:49:25.423 READ FPDMA QUEUED | |
| 60 b8 d8 80 56 a4 40 00 2d+18:49:25.423 READ FPDMA QUEUED | |
| 60 c8 d0 b8 55 a4 40 00 2d+18:49:25.423 READ FPDMA QUEUED | |
| 60 e8 c8 d0 54 a4 40 00 2d+18:49:25.422 READ FPDMA QUEUED | |
| Error 8 occurred at disk power-on lifetime: 3484 hours (145 days + 4 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 51 01 a7 04 0a 0d Error: ICRC, ABRT at LBA = 0x0d0a04a7 = 218760359 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 20 68 88 04 0a 40 00 2d+06:41:21.063 READ FPDMA QUEUED | |
| 60 20 60 a8 04 0a 40 00 2d+06:41:21.061 READ FPDMA QUEUED | |
| 60 20 58 68 04 0a 40 00 2d+06:41:21.059 READ FPDMA QUEUED | |
| 60 20 50 48 04 0a 40 00 2d+06:41:21.056 READ FPDMA QUEUED | |
| 60 18 48 e8 03 0a 40 00 2d+06:41:21.054 READ FPDMA QUEUED | |
| Error 7 occurred at disk power-on lifetime: 3483 hours (145 days + 3 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 51 11 9f 23 cd 07 Error: ICRC, ABRT at LBA = 0x07cd239f = 130884511 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 20 70 90 23 cd 40 00 2d+05:32:58.175 READ FPDMA QUEUED | |
| 60 20 68 70 23 cd 40 00 2d+05:32:58.174 READ FPDMA QUEUED | |
| 60 20 60 50 23 cd 40 00 2d+05:32:58.172 READ FPDMA QUEUED | |
| 60 20 58 08 23 cd 40 00 2d+05:32:58.171 READ FPDMA QUEUED | |
| 60 20 50 e8 22 cd 40 00 2d+05:32:58.170 READ FPDMA QUEUED | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Aborted by host 90% 3496 - | |
| # 2 Short offline Completed without error 00% 3495 - | |
| # 3 Extended offline Completed without error 00% 3353 - | |
| # 4 Extended offline Completed without error 00% 3185 - | |
| # 5 Extended offline Completed without error 00% 3017 - | |
| # 6 Extended offline Completed without error 00% 2849 - | |
| # 7 Extended offline Completed without error 00% 2681 - | |
| # 8 Extended offline Completed without error 00% 2513 - | |
| # 9 Extended offline Completed without error 00% 2345 - | |
| #10 Extended offline Completed without error 00% 2177 - | |
| #11 Extended offline Completed without error 00% 2009 - | |
| #12 Extended offline Completed without error 00% 1841 - | |
| #13 Extended offline Completed without error 00% 1673 - | |
| #14 Extended offline Completed without error 00% 1505 - | |
| #15 Extended offline Completed without error 00% 1337 - | |
| #16 Extended offline Completed without error 00% 1169 - | |
| #17 Extended offline Completed without error 00% 1001 - | |
| #18 Extended offline Completed without error 00% 833 - | |
| #19 Short offline Completed without error 00% 739 - | |
| #20 Extended offline Completed without error 00% 665 - | |
| #21 Extended offline Completed without error 00% 497 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment