Skip to content

Instantly share code, notes, and snippets.

/stdin.txt

Created November 2, 2012 16:22
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save anonymous/4002413 to your computer and use it in GitHub Desktop.
Save anonymous/4002413 to your computer and use it in GitHub Desktop.
Download ZIP
stdin
Raw
stdin.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.0.42+ (h36sa@gameinwatch) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #4 PREEMPT Mon Oct 22 17:32:10 PDT 2012
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun4i
[ 0.000000] Memory cut off:
[ 0.000000] MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Memory Reserved:
[ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
[ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
[ 0.000000] G2D : 0x58000000 - 0x58ffffff ( 16 MB)
[ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] BROM Ver: 1100 1100 1623
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c07a8c5c, node_mem_map c0865000
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 113792 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda3 loglevel=8 mac_addr= rd.driver.post=sw_ahci_platform,8192cu,mali,sun4i_wemac rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 448MB = 448MB total
[ 0.000000] Memory: 314992k/314992k available, 143760k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB)
[ 0.000000] .text : 0xc0032000 - 0xc076a000 (7392 kB)
[ 0.000000] .data : 0xc076a000 - 0xc07b0ec0 ( 284 kB)
[ 0.000000] .bss : 0xc07b0ee4 - 0xc0864898 ( 719 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:96 nr_irqs:96 96
[ 0.000000] timer0: Periodic Mode
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
[ 0.040000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.050000] Initializing cgroup subsys cpuacct
[ 0.050000] Initializing cgroup subsys devices
[ 0.050000] Initializing cgroup subsys freezer
[ 0.060000] Initializing cgroup subsys blkio
[ 0.060000] CPU: Testing write buffer coherency: ok
[ 0.060000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.070000] devtmpfs: initialized
[ 0.070000] print_constraints: dummy:
[ 0.080000] NET: Registered protocol family 16
[ 0.080000] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.090000] [ccmu] try to set apb1 parent to sata_pll failed!
[ 0.090000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[ 0.090000] Initialize DMAC OK
[ 0.100000] bio: create slab <bio-0> at 0
[ 0.100000] SCSI subsystem initialized
[ 0.100000] libata version 3.00 loaded.
[ 0.110000] usbcore: registered new interface driver usbfs
[ 0.110000] usbcore: registered new interface driver hub
[ 0.120000] usbcore: registered new device driver usb
[ 0.120000] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.130000] Bluetooth: Core ver 2.16
[ 0.130000] NET: Registered protocol family 31
[ 0.130000] Bluetooth: HCI device and connection manager initialized
[ 0.140000] Bluetooth: HCI socket layer initialized
[ 0.140000] Bluetooth: L2CAP socket layer initialized
[ 0.140000] Bluetooth: SCO socket layer initialized
[ 0.150000] Init eGon pin module V2.0
[ 0.150000] Switching to clocksource aw 64bits couter
[ 0.160000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.160000] FS-Cache: Loaded
[ 0.160000] CacheFiles: Loaded
[ 0.170000] Switched to NOHz mode on CPU #0
[ 0.170000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
[ 0.170000] [sw_hcd0]: usb host driver initialize........
[ 0.180000] [sw_hcd0]: open_usb_clock
[ 0.200000] [sw_hcd0]: host_init_state = 0
[ 0.200000] [sw_hcd0]: platform is usb host
[ 0.210000] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
[ 0.220000] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
[ 0.220000] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
[ 0.230000] hub 1-0:1.0: USB hub found
[ 0.230000] hub 1-0:1.0: 1 port detected
[ 0.230000] wrn: hcd is not enable, need not start hcd
[ 0.240000] [sw_hcd0]: sw_usb_host0_disable start
[ 0.240000] -------sw_hcd0_soft_disconnect---------
[ 0.240000] [sw_hcd_host0]: Set USB Power OFF
[ 0.240000] wrn: hcd is not enable, need not stop hcd
[ 0.250000] [sw_hcd0]: close_usb_clock
[ 0.250000] [sw_hcd0]: sw_usb_host0_disable end
[ 0.260000] [sw_udc]: udc_init: version 20080411
[ 0.260000] NET: Registered protocol family 2
[ 0.260000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.270000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.280000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.280000] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.290000] TCP reno registered
[ 0.290000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.290000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.300000] NET: Registered protocol family 1
[ 0.300000] RPC: Registered named UNIX socket transport module.
[ 0.310000] RPC: Registered udp transport module.
[ 0.310000] RPC: Registered tcp transport module.
[ 0.320000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.320000] Trying to unpack rootfs image as initramfs...
[ 0.750000] Freeing initrd memory: 6492K
[ 0.750000] [pm]aw_pm_init!
[ 0.750000] audit: initializing netlink socket (disabled)
[ 0.760000] type=2000 audit(0.759:1): initialized
[ 0.770000] VFS: Disk quotas dquot_6.5.2
[ 0.770000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.780000] NTFS driver 2.1.30 [Flags: R/W].
[ 0.790000] fuse init (API version 7.16)
[ 0.790000] msgmni has been set to 627
[ 0.800000] alg: No test for stdrng (krng)
[ 0.800000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.810000] io scheduler noop registered
[ 0.810000] io scheduler deadline registered
[ 0.810000] io scheduler cfq registered (default)
[ 0.820000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.840000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[ 1.510000] console [ttyS0] enabled
[ 1.520000] [uart]: used uart info.: 0x05
[ 1.550000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[ 1.560000] [uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
[ 1.590000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
[ 1.600000] [uart]: serial probe 2, membase (null) irq 3 mapbase 0x01c28800
[ 1.620000] G2D: drv_g2d_init
[ 1.620000] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
[ 1.630000] G2D: head:d8000000,tail:d9000000
[ 1.640000] G2D: Module initialized.major:252
[ 1.650000] brd: module loaded
[ 1.660000] loop: module loaded
[ 1.660000] [NAND]nand driver, init.
[ 1.670000] cmu_clk is 360
[ 1.670000] nand clk init end
[ 1.680000] offset 0xc: 0x6140
[ 1.680000] offset 0x14: 0x82000008
[ 1.690000] [NAND] nand gpio_request
[ 1.690000] [NAND] nand driver version: 0x2 0x9
[ 1.700000] nand interrupte register ok
[ 1.710000] ret of NFC_ChangMode is 0
[ 1.710000] dma_hdle is 0
[ 1.720000] dma_hdle is 10000008
[ 1.720000] cmu_clk is 360
[ 1.730000] nand clk init end
[ 1.730000] offset 0xc: 0x6140
[ 1.740000] offset 0x14: 0x82000005
[ 1.760000] The 0 disk name = DEVICE, class name = NAND, disk start = 0, disk size = 7782400
[ 1.780000] The 1 disk name = bootloader, type = 0, class name = DISK, disk size = 32768
[ 1.790000] The 2 disk name = env, type = 0, class name = DISK, disk size = 32768
[ 1.810000] The 3 disk name = boot, type = 0, class name = DISK, disk size = 65536
[ 1.820000] The 4 disk name = system, type = 0, class name = DISK, disk size = 1048576
[ 1.840000] The 5 disk name = data, type = 1, class name = DISK, disk size = 3145728
[ 1.850000] The 6 disk name = misc, type = 0, class name = DISK, disk size = 32768
[ 1.860000] The 7 disk name = recovery, type = 0, class name = DISK, disk size = 65536
[ 1.880000] The 8 disk name = cache, type = 0, class name = DISK, disk size = 262144
[ 1.890000] The 9 disk name = private, type = 0, class name = DISK, disk size = 32768
[ 1.910000] The 10 disk name = sysrecovery, type = 0, class name = DISK, disk size = 1048576
[ 1.920000] The 11 disk name = UDISK, type = 0, class name = DISK, disk size = 0
[ 1.940000] The 11 disk size = 1982464
[ 1.940000] part total count = 12
[ 1.950000] nand: unknown partition table
[ 1.960000] nanda:
[ 1.960000] nandb: unknown partition table
[ 1.970000] nandc: unknown partition table
[ 1.980000] nandd: unknown partition table
[ 1.990000] nande: unknown partition table
[ 2.000000] nandf: unknown partition table
[ 2.000000] nandg: unknown partition table
[ 2.010000] nandh: unknown partition table
[ 2.020000] nandi:
[ 2.030000] nandj: unknown partition table
[ 2.040000] nandk:
[ 2.040000] benn: nand probe enter
[ 2.040000] [NAND]nand driver, ok.
[ 2.050000] err: gpio count < =0 ,gpio_count is: 0
[ 2.060000] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
[ 2.070000] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
[ 2.080000] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 2.100000] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
[ 2.110000] scsi0 : sw_ahci_platform
[ 2.120000] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 56
[ 2.130000] wemac Ethernet Driver, V1.01 in file:drivers/net/sun4i/sun4i_wemac.c
[ 2.150000] [EMAC] ahb clk enable
[ 2.150000] [EMAC] ahb gate clk: 0x2026140
[ 2.190000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.200000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.210000] [sw-ehci1]: open clock
[ 2.240000] [sw-ehci1]: Set USB Power ON
[ 2.240000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.260000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
[ 2.270000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
[ 2.300000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
[ 2.300000] ehci_irq: port change detect
[ 2.310000] hub 2-0:1.0: USB hub found
[ 2.320000] hub 2-0:1.0: 1 port detected
[ 2.330000] [sw-ohci1]: open clock
[ 2.350000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.360000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
[ 2.380000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
[ 2.450000] hub 3-0:1.0: USB hub found
[ 2.460000] hub 3-0:1.0: 1 port detected
[ 2.460000] [sw-ehci2]: open clock
[ 2.490000] [sw-ehci2]: Set USB Power ON
[ 2.500000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.510000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.520000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
[ 2.530000] ata1.00: ATA-8: WDC WD2500BEVS-60UST0, 01.01A01, max UDMA/100
[ 2.550000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
[ 2.560000] ata1.00: 488397168 sectors, multi 0: LBA48
[ 2.570000] ata1.00: configured for UDMA/100
[ 2.590000] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-6 01.0 PQ: 0 ANSI: 5
[ 2.600000] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.620000] sd 0:0:0:0: [sda] Write Protect is off
[ 2.620000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.630000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.680000] usb 2-1: new high speed USB device number 2 using sw-ehci
[ 2.700000] sda: sda1 sda2 sda3 sda4
[ 2.710000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
[ 2.710000] ehci_irq: port change detect
[ 2.720000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.730000] hub 4-0:1.0: USB hub found
[ 2.740000] hub 4-0:1.0: 1 port detected
[ 2.740000] [sw-ehci2]: disable ehci
[ 2.750000] sw-ehci sw-ehci.2: remove, state 1
[ 2.760000] usb usb4: USB disconnect, device number 1
[ 2.770000] sw-ehci sw-ehci.2: USB bus 4 deregistered
[ 2.780000] [sw-ehci2]: Set USB Power OFF
[ 2.780000] [sw-ehci2]: close clock
[ 2.790000] [sw-ohci2]: open clock
[ 2.820000] [sw-ohci2]: Set USB Power ON
[ 2.820000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.840000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
[ 2.850000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
[ 2.880000] hub 2-1:1.0: USB hub found
[ 2.880000] hub 2-1:1.0: 4 ports detected
[ 2.920000] hub 4-0:1.0: USB hub found
[ 2.930000] hub 4-0:1.0: 1 port detected
[ 2.930000] [sw-ohci2]: disable ohci
[ 2.940000] sw-ohci sw-ohci.2: remove, state 1
[ 2.950000] usb usb4: USB disconnect, device number 1
[ 2.960000] sw-ohci sw-ohci.2: USB bus 4 deregistered
[ 2.970000] [sw-ohci2]: Set USB Power OFF
[ 2.970000] [sw-ohci2]: close clock
[ 2.980000] Initializing USB Mass Storage driver...
[ 2.990000] usbcore: registered new interface driver usb-storage
[ 3.000000] USB Mass Storage support registered.
[ 3.010000] usbcore: registered new interface driver ums-alauda
[ 3.020000] usbcore: registered new interface driver ums-cypress
[ 3.030000] usbcore: registered new interface driver ums-datafab
[ 3.040000] usbcore: registered new interface driver ums_eneub6250
[ 3.050000] usbcore: registered new interface driver ums-freecom
[ 3.060000] usbcore: registered new interface driver ums-isd200
[ 3.070000] usbcore: registered new interface driver ums-jumpshot
[ 3.080000] usbcore: registered new interface driver ums-karma
[ 3.090000] usbcore: registered new interface driver ums-onetouch
[ 3.110000] usbcore: registered new interface driver ums-realtek
[ 3.120000] usbcore: registered new interface driver ums-sddr09
[ 3.130000] usbcore: registered new interface driver ums-sddr55
[ 3.140000] usbcore: registered new interface driver ums-usbat
[ 3.150000] mousedev: PS/2 mouse device common for all mice
[ 3.160000] sunxi RTC version 0.1
[ 3.170000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
[ 3.180000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[ 3.190000] sunxi-rtc sunxi-rtc: read time 2012-10-30 3:15:58
[ 3.200000] using rtc device, rtc, for alarms
[ 3.200000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[ 3.220000] i2c /dev entries driver
[ 3.220000] !!! base_Addr = 0xdc8d4c00
[ 3.230000] config i2c gpio with gpio_config api
[ 3.240000] twi0, apb clock = 24000000
[ 3.240000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
[ 3.260000] usb 2-1.2: new full speed USB device number 3 using sw-ehci
[ 3.270000] I2C: i2c-0: AW16XX I2C adapter
[ 3.270000] **********start************
[ 3.280000] 0x40
[ 3.280000] 0xf8
[ 3.290000] 0x28
[ 3.290000] 0x0
[ 3.290000] 0x0
[ 3.290000] **********end************
[ 3.300000] !!! base_Addr = 0xdc8d6000
[ 3.310000] twi1, apb clock = 24000000
[ 3.310000] I2C: i2c-1: AW16XX I2C adapter
[ 3.320000] **********start************
[ 3.330000] 0x40
[ 3.330000] 0xf8
[ 3.330000] 0x58
[ 3.330000] 0x0
[ 3.340000] 0x0
[ 3.340000] **********end************
[ 3.340000] !!! base_Addr = 0xdc8d8400
[ 3.350000] twi2, apb clock = 24000000
[ 3.360000] I2C: i2c-2: AW16XX I2C adapter
[ 3.370000] **********start************
[ 3.370000] 0x40
[ 3.370000] 0xf8
[ 3.380000] 0x58
[ 3.380000] 0x0
[ 3.380000] 0x0
[ 3.380000] **********end************
[ 3.390000] lirc_dev: IR Remote Control driver registered, major 251
[ 3.400000] IR NEC protocol handler initialized
[ 3.410000] IR RC5(x) protocol handler initialized
[ 3.420000] IR RC6 protocol handler initialized
[ 3.430000] IR JVC protocol handler initialized
[ 3.440000] hub 2-1.2:1.0: USB hub found
[ 3.440000] IR Sony protocol handler initialized
[ 3.450000] hub 2-1.2:1.0: 4 ports detected
[ 3.460000] IR RC5 (streamzap) protocol handler initialized
[ 3.470000] IR LIRC bridge handler initialized
[ 3.480000] Linux video capture interface: v2.00
[ 3.480000] [cedar dev]: install start!!!
[ 3.490000] [cedar dev]: install end!!!
[ 3.500000] [ace_drv] start!!!
[ 3.500000] [ace_drv] init end!!!
[ 3.510000] [pa_drv] start!!!
[ 3.510000] [pa_drv] init end!!!
[ 3.520000] print_constraints: axp20_ldo1: 1300 mV
[ 3.530000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[ 3.540000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[ 3.560000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[ 3.570000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
[ 3.580000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
[ 3.590000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[ 3.610000] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
[ 3.640000] Bluetooth: HCI UART driver ver 2.2
[ 3.650000] Bluetooth: HCI H4 protocol initialized
[ 3.660000] Bluetooth: HCI BCSP protocol initialized
[ 3.670000] Bluetooth: HCILL protocol initialized
[ 3.680000] cpuidle: using governor ladder
[ 3.680000] cpuidle: using governor menu
[ 3.690000] [mmc_pm]: no sdio card used in configuration
[ 3.700000] [mmc]: sunximmc_init
[ 3.700000] [mmc]: sunxi mmc controller using config : 0xb
[ 3.710000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[ 3.730000] [mmc]: mmc 0 power off !!
[ 3.730000] [mmc]: mmc0 Probe: base:0xdc8e0000 irq:32 dma:0 pdes:0xc5120000, ret 0.
[ 3.750000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
[ 3.760000] [mmc]: mmc 1 power off !!
[ 3.760000] [mmc]: mmc1 Probe: base:0xdc8e2000 irq:33 dma:0 pdes:0xc5124000, ret 0.
[ 3.780000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
[ 3.790000] [mmc]: mmc 3 power off !!
[ 3.800000] [mmc]: mmc3 Probe: base:0xdc8e4000 irq:35 dma:0 pdes:0xc5128000, ret 0.
[ 3.810000] usbcore: registered new interface driver usbhid
[ 3.820000] usbhid: USB HID core driver
[ 3.830000] usb 2-1.2.1: new low speed USB device number 4 using sw-ehci
[ 3.840000] enter sun4i Audio codec!!!
[ 3.850000] sun4i audio support initialized
[ 3.850000] sun4i Audio codec successfully loaded..
[ 3.860000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
[ 3.880000] ALSA device list:
[ 3.880000] #0: sun4i-CODEC Audio Codec
[ 3.890000] #1: sun4i-sndhdmi
[ 3.890000] IPv4 over IPv4 tunneling driver
[ 3.900000] TCP cubic registered
[ 3.910000] Initializing XFRM netlink socket
[ 3.910000] NET: Registered protocol family 10
[ 3.920000] NET: Registered protocol family 17
[ 3.930000] NET: Registered protocol family 15
[ 3.940000] Bluetooth: RFCOMM TTY layer initialized
[ 3.950000] Bluetooth: RFCOMM socket layer initialized
[ 3.960000] Bluetooth: RFCOMM ver 1.11
[ 3.960000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.970000] Bluetooth: BNEP filters: protocol multicast
[ 3.980000] 802.1Q VLAN Support v1.8
[ 3.990000] [mmc_pm]: No sdio card, please check your config !!
[ 4.000000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 4.010000] Registering SWP/SWPB emulation handler
[ 4.020000] registered taskstats version 1
[ 4.030000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
[ 4.050000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
[ 4.060000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
[ 4.080000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
[ 4.090000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
[ 4.110000] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
[ 4.120000] input: Logitech USB Keyboard as /devices/platform/sw-ehci.1/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input1
[ 4.140000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[ 4.150000] sunxi-rtc sunxi-rtc: read time 2012-10-30 3:15:59
[ 4.160000] generic-usb 0003:046D:C31D.0001: input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-sw-ehci-1.2.1/input0
[ 4.180000] sunxi-rtc sunxi-rtc: setting system clock to 2012-10-30 03:15:59 UTC (1351566959)
[ 4.200000] Freeing init memory: 168K
[ 4.250000] input: Logitech USB Keyboard as /devices/platform/sw-ehci.1/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.1/input/input2
[ 4.290000] generic-usb 0003:046D:C31D.0002: input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-sw-ehci-1.2.1/input1
[ 4.440000] dracut: dracut- dracut-
[ 4.730000] [mmc]: mmc 0 detect change, present 1
[ 4.820000] udevd[110]: starting version 175
[ 5.030000] [mmc]: mmc 0 power on !!
[ 5.070000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
[ 5.080000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
[ 5.130000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 5.140000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 5.150000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 5.170000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 5.220000] mmc0: new SD card at address 9163
[ 5.230000] mmcblk0: mmc0:9163 SD02G 1.84 GiB
[ 5.270000] mmcblk0: p1 p2 p3
[ 6.120000] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 6.310000] dracut: Checking ext4: /dev/sda3
[ 6.320000] dracut: issuing e2fsck -a /dev/sda3
[ 6.410000] dracut: /dev/sda3: clean, 214322/3080192 files, 1251013/12320768 blocks
[ 6.440000] dracut: Remounting /dev/sda3 with -o ro
[ 6.550000] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 6.670000] dracut: Mounted root filesystem /dev/sda3
[ 7.190000] dracut: Switching root
[ 7.940000] init: ureadahead main process (251) terminated with status 5
[ 10.240000] udevd[375]: starting version 175
[ 11.110000] [LCD] lcd_module_init
[ 11.290000] Console: switching to colour frame buffer device 160x45
[ 11.420000] UMP<2>: Inserting UMP device driver. Compiled: Oct 22 2012, time: 07:36:40
[ 11.440000] UMP<2>: Using OS memory backend, allocation limit: 134217728
[ 11.440000] UMP: UMP device driver loaded
[ 12.170000] mali: use config clk_div 4
[ 12.170000] mali: clk_div 4
[ 12.170000] Mali: mali clock set completed, clock is 300000000 Mhz
[ 12.270000] Mali: Mali device driver loaded
[ 13.500000] [drm] Initialized drm 1.1.0 20060810
[ 13.860000] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 13.860000] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
[ 13.950000] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 14.090000] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
[ 15.170000] wemac wemac.0: WARNING: no IRQ resource flags set.
[ 15.230000] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 15.310000] wemac wemac.0: eth0: link down
[ 15.310000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.410000] [mmc_pm]: No sdio card, please check your config !!
[ 16.930000] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k
[ 17.130000] init: gator-daemon main process (717) terminated with status 1
[ 17.350000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.390000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[ 17.600000] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.1
[ 20.850000] init: failsafe main process (698) killed by TERM signal
[ 25.300000] init: tty1 main process (1164) killed by TERM signal
[ 28.250000] eth0: no IPv6 routers present
[54991.660000] wemac wemac.0: eth0: link down
[55008.000000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[55010.040000] wemac wemac.0: eth0: link down
[55012.100000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[55028.420000] wemac wemac.0: eth0: link down
[55030.480000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[55032.520000] wemac wemac.0: eth0: link down
[55036.620000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[55245.540000] CIFS VFS: Server gameinwatch has not responded in 300 seconds. Reconnecting...
[106687.590000] wemac wemac.0: eth0: link down
[106691.690000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[106708.010000] wemac wemac.0: eth0: link down
[106710.070000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[106712.110000] wemac wemac.0: eth0: link down
[106716.210000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[107307.810000] wemac wemac.0: eth0: link down
[107313.950000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[107315.990000] wemac wemac.0: eth0: link down
[107318.050000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[107338.450000] wemac wemac.0: eth0: link down
[107340.510000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[220948.670000] udevd[5916]: starting version 175
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment