output

OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
WARNING: Caches not enabled
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment

In:    serial
Out:   serial
Err:   serial
Beagle xM Rev C
No EEPROM on expansion board
Die ID #033200029ff80000016849a90501602d
Net:   No ethernet found.
checking for preEnv.txt
reading preEnv.txt

** Unable to read "preEnv.txt" from mmc 0:1 **
Hit any key to stop autoboot:  0
The user button is currently NOT pressed.
SD/MMC found on device 0
reading uEnv.txt

** Unable to read "uEnv.txt" from mmc 0:1 **
reading boot.scr

508 bytes read
Loaded script from boot.scr
Running bootscript from mmc0 ...
## Executing script at 80200000
reading uImage

3093008 bytes read
reading uInitrd

1501429 bytes read
reading board.dtb

960 bytes read
## Booting kernel from Legacy Image at 80000000 ...
   Image Name:   3.2.33-x15
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3092944 Bytes = 2.9 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
   Image Name:   initramfs
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    1501365 Bytes = 1.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 815f0000
   Booting using the fdt blob at 0x815f0000
   Loading Kernel Image ... OK
OK
   Using Device Tree in place at 815f0000, end 815f33bf

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.33-x15 (ferre@ubuntu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Fri Nov 16 06:52:59 PST 2012
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic OMAP3 (Flattened Device Tree), model: TI OMAP3 BeagleBoard
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] Reserving 12582912 bytes SDRAM for VRAM
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0d45000 s10816 r8192 d13760 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125440
[    0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 root=UUID=569bb123-7e36-4d92-a194-ec833df32431 rootwait ro earlyprintk fixrtc nocompcache vram=12M omapfb.mode=dvi:1280x720MR-16@60 mpurate=auto
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 494MB = 494MB total
[    0.000000] Memory: 488308k/488308k available, 35980k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xf8000000   ( 376 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07b8738   (7874 kB)
[    0.000000]       .init : 0xc07b9000 - 0xc080fa40   ( 347 kB)
[    0.000000]       .data : 0xc0810000 - 0xc087b130   ( 429 kB)
[    0.000000]        .bss : 0xc087b154 - 0xc093f0d0   ( 784 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:410 nr_irqs:410 410
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.008972] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
[    0.059509] pid_max: default: 32768 minimum: 301
[    0.064605] Security Framework initialized
[    0.068969] AppArmor: AppArmor initialized
[    0.073577] Mount-cache hash table entries: 512
[    0.079559] Initializing cgroup subsys cpuacct
[    0.084320] Initializing cgroup subsys memory
[    0.088958] Initializing cgroup subsys devices
[    0.093627] Initializing cgroup subsys freezer
[    0.098327] Initializing cgroup subsys blkio
[    0.102813] Initializing cgroup subsys perf_event
[    0.107879] CPU: Testing write buffer coherency: ok
[    0.113281] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.119415] Brought up 1 CPUs
[    0.122558] SMP: Total of 1 processors activated (597.64 BogoMIPS).
[    0.130187] devtmpfs: initialized
[    0.139862] print_constraints: dummy:
[    0.144256] NET: Registered protocol family 16
[    0.149108] GPMC revision 5.0
[    0.153656] OMAP GPIO hardware version 2.5
[    0.161712] Reprogramming SDRC clock to 400000000 Hz
[    0.166992] dpll3_m2_clk rate change failed: -22
[    0.171936] platform soc.0: No 'hwmods' to build omap_device
[    0.178436] platform interrupt-controller.4: No 'hwmods' to build omap_device
[    0.185974] No ATAGs?
[    0.188140] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.195098] Could not look up mcpdm hw_mod
[    0.202667]  omap-mcbsp.2: alias fck already exists
[    0.208038]  omap-mcbsp.3: alias fck already exists
[    0.214477] OMAP DMA hardware revision 5.0
[    0.227600] bio: create slab <bio-0> at 0
[    0.233337] SCSI subsystem initialized
[    0.238769] usbcore: registered new interface driver usbfs
[    0.244720] usbcore: registered new interface driver hub
[    0.250488] usbcore: registered new device driver usb
[    0.256561] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
[    0.265228] twl4030: PIH (irq 7) chaining IRQs 368..375
[    0.270843] twl4030: power (irq 373) chaining IRQs 376..383
[    0.278137] omap-iommu omap-iommu.0: isp registered
[    0.284149] NetLabel: Initializing
[    0.287750] NetLabel:  domain hash size = 128
[    0.292358] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.297637] NetLabel:  unlabeled traffic allowed by default
[    0.303527] Switching to clocksource 32k_counter
[    0.328369] AppArmor: AppArmor Filesystem Enabled
[    0.347503] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    0.354064] NET: Registered protocol family 2
[    0.359375] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.367767] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.375732] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.382995] TCP: Hash tables configured (established 16384 bind 16384)
[    0.389831] TCP reno registered
[    0.393157] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.399322] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.406280] NET: Registered protocol family 1
[    0.411437] RPC: Registered named UNIX socket transport module.
[    0.417633] RPC: Registered udp transport module.
[    0.422637] RPC: Registered tcp transport module.
[    0.427581] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.434631] Trying to unpack rootfs image as initramfs...
[    0.579071] Freeing initrd memory: 1464K
[    0.583557] omap_dsp_init: 600000 bytes @ 9ee00000
[    0.590606] audit: initializing netlink socket (disabled)
[    0.596313] type=2000 audit(0.601:1): initialized
[    0.810852] VFS: Disk quotas dquot_6.5.2
[    0.815521] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.827270] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.834411] fuse init (API version 7.17)
[    0.840606] Btrfs loaded
[    0.843353] msgmni has been set to 956
[    0.849090] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.856903] io scheduler noop registered
[    0.861022] io scheduler deadline registered
[    0.865600] io scheduler cfq registered (default)
[    0.872192] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.880310] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[    0.888122] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[    0.895874] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[    0.903320] console [ttyO2] enabled, bootconsole disabled
[    0.903320] console [ttyO2] enabled, bootconsole disabled
[    0.915039] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
[    0.933929] brd: module loaded
[    0.942199] loop: module loaded
[    0.946777] omap2-nand driver initializing
[    0.951385] OneNAND driver initializing
[    0.956176] usbcore: registered new interface driver cdc_ether
[    0.962432] usbcore: registered new interface driver rndis_host
[    0.968719] cdc_ncm: 04-Aug-2011
[    0.972198] usbcore: registered new interface driver cdc_ncm
[    0.978607] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.985626] Initializing USB Mass Storage driver...
[    0.990905] usbcore: registered new interface driver usb-storage
[    0.997253] USB Mass Storage support registered.
[    1.002197] usbcore: registered new interface driver libusual
[    1.008422] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
[    1.015808] mousedev: PS/2 mouse device common for all mice
[    1.022827] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
[    1.034851] i2c /dev entries driver
[    1.038879] Linux media interface: v0.10
[    1.043212] lirc_dev: IR Remote Control driver registered, major 249
[    1.049957] Linux video capture interface: v2.00
[    1.055084] Driver for 1-wire Dallas network protocol.
[    1.061309] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    1.067993] twl4030_wdt twl4030_wdt: Failed to register misc device
[    1.074645] twl4030_wdt: probe of twl4030_wdt failed with error -16
[    1.082427] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.091644] cpuidle: using governor ladder
[    1.095947] cpuidle: using governor menu
[    1.100189] sdhci: Secure Digital Host Controller Interface driver
[    1.106719] sdhci: Copyright(c) Pierre Ossman
[    1.111907] usbcore: registered new interface driver usbhid
[    1.117828] usbhid: USB HID core driver
[    1.122039] oprofile: hardware counters not available
[    1.127349] oprofile: using timer interrupt.
[    1.133270] TCP cubic registered
[    1.137878] NET: Registered protocol family 10
[    1.145416] NET: Registered protocol family 17
[    1.150329] Registering the dns_resolver key type
[    1.155364] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    1.163482] ThumbEE CPU extension supported.
[    1.167999] Registering SWP/SWPB emulation handler
[    1.176208] sr_init: No PMIC hook to init smartreflex
[    1.181671] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    1.190063] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    1.198394] SmartReflex Class3 initialized
[    1.209960] clock: disabling unused clocks to save power
[    1.216827] registered taskstats version 1
[    1.221343] omapfb omapfb: no displays
[    1.225372] omapfb omapfb: failed to setup omapfb
[    1.230346] omapfb: probe of omapfb failed with error -22
[    1.236175] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.242889] omap_vout omap_vout: probed for an unknown device
[    1.250335] Freeing init memory: 344K
Loading, please wait...
[    1.400115] udevd[59]: starting version 173
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Gave up waiting for root device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
   - Check root= (did the system wait for the right device?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  /dev/disk/by-uuid/569bb123-7e36-4d92-a194-ec833df32431 does not exist.  Dropping to a shell!
FATAL: Could not load /lib/modules/3.2.33-x15/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/3.2.33-x15/modules.dep: No such file or directory


usyBox v1.18.4 (Ubuntu 1:1.18.4-2ubuntu2) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs)