Created
November 28, 2012 13:44
-
-
Save anonymous/4161397 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[root@bud:cdecker]# sudo smartctl /dev/sda -d megaraid,5 -a | |
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) | |
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net | |
/dev/sda [megaraid_disk_05] [SAT]: Device open changed type from 'megaraid' to 'sat' | |
=== START OF INFORMATION SECTION === | |
Device Model: WDC WD5003ABYX-01WERA1 | |
Serial Number: WD-WMAYP4753240 | |
Firmware Version: 01.01S02 | |
User Capacity: 500,107,862,016 bytes | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: Exact ATA specification draft version not indicated | |
Local Time is: Wed Nov 28 14:44:05 2012 CET | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x80) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: (8160) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 83) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x303f) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 141 141 021 Pre-fail Always - 3916 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 11 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 133 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 8 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2 | |
194 Temperature_Celsius 0x0022 109 098 000 Old_age Always - 34 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Self-test log structure revision number 1 | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
[root@bud:cdecker]# sudo smartctl /dev/sda -d megaraid,4 -a | |
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) | |
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net | |
/dev/sda [megaraid_disk_04] [SAT]: Device open changed type from 'megaraid' to 'sat' | |
=== START OF INFORMATION SECTION === | |
Model Family: SAMSUNG SpinPoint F1 DT series | |
Device Model: SAMSUNG HD502IJ | |
Serial Number: S13TJ1KQ503997 | |
Firmware Version: 1AA01110 | |
User Capacity: 500,107,862,016 bytes | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 3b | |
Local Time is: Wed Nov 28 14:44:41 2012 CET | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: (7608) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 128) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 14) minutes. | |
SCT capabilities: (0x003f) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x000f 099 075 051 Pre-fail Always - 784 | |
3 Spin_Up_Time 0x0007 086 086 011 Pre-fail Always - 5110 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 41 | |
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 | |
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 | |
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 37226 | |
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 | |
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 41 | |
13 Read_Soft_Error_Rate 0x000e 099 077 000 Old_age Always - 682 | |
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
184 End-to-End_Error 0x0033 100 100 099 Pre-fail Always - 0 | |
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 4861 | |
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 | |
190 Airflow_Temperature_Cel 0x0022 070 060 000 Old_age Always - 30 (Lifetime Min/Max 25/30) | |
194 Temperature_Celsius 0x0022 069 058 000 Old_age Always - 31 (Lifetime Min/Max 25/32) | |
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 2732347 | |
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 23 | |
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 | |
201 Soft_Read_Error_Rate 0x000a 098 098 000 Old_age Always - 16 | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Self-test log structure revision number 0 | |
Warning: ATA Specification requires self-test log structure revision number = 1 | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run | |
SMART Selective self-test log data structure revision number 0 | |
Note: revision number not 1 implies that no selective self-test has ever been run | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment