Skip to content

Instantly share code, notes, and snippets.

@tomari
Forked from anonymous/gist:4357637
Created December 22, 2012 05:38
Show Gist options
  • Save tomari/4357642 to your computer and use it in GitHub Desktop.
Save tomari/4357642 to your computer and use it in GitHub Desktop.
HP Vectra VE 5/200 Series 4
processor : 0
vendor_id : GenuineIntel
cpu family : 5
model : 4
model name : Pentium MMX
stepping : 3
cpu MHz : 200.446
cache size : 0 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 mmx
bogomips : 400.89
clflush size : 32
cache_alignment : 32
address sizes : 32 bits physical, 32 bits virtual
power management:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 5597 [SiS5582] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 8a [Master SecP PriP])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fcf0 [size=16]
Kernel driver in use: pata_sis
00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 10) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fedff000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:0a.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 25)
Subsystem: Hewlett-Packard Company Ethernet with LAN remote power Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at fcc0 [size=32]
Region 1: Memory at fedfec00 (32-bit, non-prefetchable) [size=32]
[virtual] Expansion ROM at 0c000000 [disabled] [size=1M]
Kernel driver in use: pcnet32
00:0d.0 VGA compatible controller: S3 Inc. 86c775/86c785 [Trio 64V2/DX or /GX] (rev 16) (prog-if 00 [VGA controller])
Subsystem: S3 Inc. 86C775 Trio64V2/DX, 86C785 Trio64V2/GX
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
[virtual] Expansion ROM at 0c100000 [disabled] [size=64K]
0 [AZT2320 ]: AZT2320 - Aztech AZT2320
Aztech AZT2320, WSS at 0x534, irq 5, dma 1&3
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-486 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Sun Sep 23 09:17:35 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f2400 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000a000000 (usable)
[ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0xa000 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000000a000000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000a000000 page 2M
[ 0.000000] kernel direct mapping tables up to a000000 @ 7000-b000
[ 0.000000] RAMDISK: 09425000 - 09fdef19
[ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 160MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0a000000
[ 0.000000] low ram: 0 - 0a000000
[ 0.000000] node 0 low ram: 00000000 - 0a000000
[ 0.000000] node 0 bootmap 00001000 - 00002400
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 000a000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 0001453a60] TEXT DATA BSS ==> [0001000000 - 0001453a60]
[ 0.000000] #2 [0009425000 - 0009fdef19] RAMDISK ==> [0009425000 - 0009fdef19]
[ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #4 [0001454000 - 000145a000] BRK ==> [0001454000 - 000145a000]
[ 0.000000] #5 [0000001000 - 0000003000] BOOTMAP ==> [0000001000 - 0000003000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000a000
[ 0.000000] HighMem 0x0000a000 -> 0x0000a000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000a000
[ 0.000000] On node 0 totalpages: 40863
[ 0.000000] free_area_init_node: node 0, pgdat c1360c64, node_mem_map c145b000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 288 pages used for memmap
[ 0.000000] Normal zone: 36576 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f3000
[ 0.000000] PM: Registered nosave memory: 00000000000f3000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at a000000 (gap: a000000:f5fe0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 40543
[ 0.000000] Kernel command line: initrd=/live/initrd.img boot=live config noapic noapm nodma nomce nolapic nomodeset nosmp vga=normal BOOT_IMAGE=/live/vmlinuz
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 145340k/163840k available (2342k kernel code, 17964k reserved, 1145k data, 444k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xca800000 - 0xff7fe000 ( 847 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xca000000 ( 160 MB)
[ 0.000000] .init : 0xc1368000 - 0xc13d7000 ( 444 kB)
[ 0.000000] .data : 0xc124986d - 0xc1367c84 (1145 kB)
[ 0.000000] .text : 0xc1000000 - 0xc124986d (2342 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:288
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 200.446 MHz processor.
[ 0.008022] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.89 BogoMIPS (lpj=801784)
[ 0.008358] Security Framework initialized
[ 0.008480] SELinux: Disabled at boot.
[ 0.008615] Mount-cache hash table entries: 512
[ 0.009958] Initializing cgroup subsys ns
[ 0.010071] Initializing cgroup subsys cpuacct
[ 0.010167] Initializing cgroup subsys devices
[ 0.010263] Initializing cgroup subsys freezer
[ 0.010356] Initializing cgroup subsys net_cls
[ 0.010629] Intel Pentium with F0 0F bug - workaround enabled.
[ 0.010738]
[ 0.010921] CPU: Intel Pentium MMX stepping 03
[ 0.012158] Checking 'hlt' instruction... OK.
[ 0.038839] Apic disabled
[ 0.039979] devtmpfs: initialized
[ 0.044150] regulator: core version 0.5
[ 0.044977] NET: Registered protocol family 16
[ 0.046601] EISA bus registered
[ 0.049445] PCI: PCI BIOS revision 2.10 entry at 0xfdba7, last bus=0
[ 0.049561] PCI: Using configuration type 1 for base access
[ 0.056863] bio: create slab <bio-0> at 0
[ 0.057786] ACPI: Interpreter disabled.
[ 0.058504] vgaarb: loaded
[ 0.059588] PCI: Probing PCI hardware
[ 0.059691] PCI: Probing PCI hardware (bus 00)
[ 0.060417] pci 0000:00:01.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.060465] pci 0000:00:01.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.060508] pci 0000:00:01.1: reg 18 io port: [0x170-0x177]
[ 0.060552] pci 0000:00:01.1: reg 1c io port: [0x374-0x377]
[ 0.060595] pci 0000:00:01.1: reg 20 io port: [0xfcf0-0xfcff]
[ 0.060740] pci 0000:00:01.2: reg 10 32bit mmio: [0xfedff000-0xfedfffff]
[ 0.060925] pci 0000:00:0a.0: reg 10 io port: [0xfcc0-0xfcdf]
[ 0.060973] pci 0000:00:0a.0: reg 14 32bit mmio: [0xfedfec00-0xfedfec1f]
[ 0.061040] pci 0000:00:0a.0: reg 30 32bit mmio pref: [0x000000-0x0fffff]
[ 0.061177] pci 0000:00:0d.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.061250] pci 0000:00:0d.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.063023] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.065321] Switching to clocksource tsc
[ 0.077952] pnp: PnP ACPI: disabled
[ 0.078057] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.078509] PnPBIOS: Found PnP BIOS installation structure at 0xc00f8170
[ 0.078703] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf3f, dseg 0x400
[ 0.143248] pnp 00:01: mem resource (0x0-0x9ffff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling
[ 0.143415] pnp 00:01: mem resource (0xec000-0xfffff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling
[ 0.346829] PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
[ 0.347041] system 00:00: ioport range 0x8400-0x8403 has been reserved
[ 0.347166] system 00:00: ioport range 0x8404-0x8407 has been reserved
[ 0.347285] system 00:00: ioport range 0x8408-0x8409 has been reserved
[ 0.347401] system 00:00: ioport range 0x8410-0x841f has been reserved
[ 0.347524] system 00:00: ioport range 0x8440-0x847f has been reserved
[ 0.347648] system 00:00: iomem range 0xfffe0000-0xffffffff has been reserved
[ 0.347772] system 00:00: iomem range 0xffee0000-0xffefffff has been reserved
[ 0.347941] system 00:01: iomem range 0x100000-0x9ffffff could not be reserved
[ 0.348144] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.351369] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.351415] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.351723] NET: Registered protocol family 2
[ 0.352750] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.356058] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.356938] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.357421] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.357523] TCP reno registered
[ 0.358235] NET: Registered protocol family 1
[ 0.358514] pci 0000:00:00.0: Disabling direct PCI/PCI transfers
[ 0.358766] pci 0000:00:01.2: enabling device (0010 -> 0012)
[ 0.359061] pci 0000:00:0d.0: Boot video device
[ 0.359541] Unpacking initramfs...
[ 7.021271] Freeing initrd memory: 12007k freed
[ 7.171400] audit: initializing netlink socket (disabled)
[ 7.171628] type=2000 audit(1356185650.171:1): initialized
[ 7.206188] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 7.228452] VFS: Disk quotas dquot_6.5.2
[ 7.229406] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 7.230519] msgmni has been set to 307
[ 7.233219] alg: No test for stdrng (krng)
[ 7.233749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 7.233893] io scheduler noop registered
[ 7.233989] io scheduler anticipatory registered
[ 7.234083] io scheduler deadline registered
[ 7.234381] io scheduler cfq registered (default)
[ 7.236536] isapnp: Scanning for PnP cards...
[ 7.360804] 01:01: card 'AZT1008 PnP SOUND DEVICE'
[ 7.360914] isapnp: 1 Plug & Play card detected total
[ 7.388408] Linux agpgart interface v0.103
[ 7.390204] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 7.390807] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 7.394595] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 7.396995] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 7.397111] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 7.398102] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.399606] mice: PS/2 mouse device common for all mice
[ 7.400799] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 7.401003] rtc0: alarms up to one day, 114 bytes nvram
[ 7.401676] EISA: Probing bus 0 at eisa.0
[ 7.401917] Cannot allocate resource for EISA slot 8
[ 7.402017] EISA: Detected 0 cards.
[ 7.402107] cpuidle: using governor ladder
[ 7.402198] cpuidle: using governor menu
[ 7.402319] No iBFT detected.
[ 7.407699] TCP cubic registered
[ 7.410337] NET: Registered protocol family 10
[ 7.420767] Mobile IPv6
[ 7.420872] NET: Registered protocol family 17
[ 7.421024] Using IPI Shortcut mode
[ 7.423457] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 7.423755] PM: Resume from disk failed.
[ 7.423896] registered taskstats version 1
[ 7.424872] rtc_cmos 00:05: setting system clock to 2012-12-22 14:14:10 UTC (1356185650)
[ 7.425526] Initalizing network drop monitor service
[ 7.425869] Freeing unused kernel memory: 444k freed
[ 7.432199] Write protecting the kernel text: 2344k
[ 7.432522] Write protecting the kernel read-only data: 896k
[ 8.430608] udev[45]: starting version 164
[ 10.020406] SCSI subsystem initialized
[ 10.078907] Floppy drive(s): fd0 is 1.44M
[ 10.407900] FDC 0 is a National Semiconductor PC87306
[ 10.432078] libata version 3.00 loaded.
[ 10.705416] usbcore: registered new interface driver usbfs
[ 10.710450] usbcore: registered new interface driver hub
[ 10.746965] usbcore: registered new device driver usb
[ 10.759153] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 10.759467] pcnet32 0000:00:0a.0: enabling device (0000 -> 0003)
[ 10.759613] pcnet32 0000:00:0a.0: setting latency timer to 32
[ 10.759841] pcnet32: PCnet/FAST 79C971 at 0xfcc0, 00:60:b0:c4:dd:fd
[ 10.759998] tx_start_pt(0x0c00):~220 bytes, BCR18(9861):BurstWrEn BurstRdEn NoUFlow
[ 10.760353] SRAMSIZE=0x7f00, SRAM_BND=0x3f00, assigned IRQ 10.
[ 10.760864] pcnet32: Found PHY 7810:0000 at address 1.
[ 10.796730] eth0: registered as PCnet/FAST 79C971
[ 10.801399] pcnet32: 1 cards_found.
[ 10.813809] pata_sis 0000:00:01.1: version 0.5.2
[ 10.814585] pata_sis 0000:00:01.1: setting latency timer to 32
[ 10.823977] scsi0 : pata_sis
[ 10.826712] scsi1 : pata_sis
[ 10.828834] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfcf0 irq 14
[ 10.828968] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfcf8 irq 15
[ 10.870520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 11.020200] ata1.00: ATA-3: QUANTUM FIREBALL SE2.1A, API.0C00, max UDMA/33
[ 11.020338] ata1.00: 4124736 sectors, multi 16: LBA
[ 11.036251] ata1.00: configured for UDMA/33
[ 11.037619] scsi 0:0:0:0: Direct-Access ATA QUANTUM FIREBALL API. PQ: 0 ANSI: 5
[ 11.204334] ata2.00: ATAPI: _NEC CD-RW NR-7800B, 1.01, max UDMA/33
[ 11.220449] ata2.00: configured for UDMA/33
[ 11.227561] scsi 1:0:0:0: CD-ROM _NEC NR-7800B 1.01 PQ: 0 ANSI: 5
[ 11.304606] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.305024] ohci_hcd 0000:00:01.2: setting latency timer to 32
[ 11.305067] ohci_hcd 0000:00:01.2: OHCI Host Controller
[ 11.305397] ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 11.305703] ohci_hcd 0000:00:01.2: irq 9, io mem 0xfedff000
[ 11.361965] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.362105] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.362227] usb usb1: Product: OHCI Host Controller
[ 11.362324] usb usb1: Manufacturer: Linux 2.6.32-5-486 ohci_hcd
[ 11.362430] usb usb1: SerialNumber: 0000:00:01.2
[ 11.364467] usb usb1: configuration #1 chosen from 1 choice
[ 11.365779] hub 1-0:1.0: USB hub found
[ 11.366033] hub 1-0:1.0: 2 ports detected
[ 11.593927] sd 0:0:0:0: [sda] 4124736 512-byte logical blocks: (2.11 GB/1.96 GiB)
[ 11.595351] sd 0:0:0:0: [sda] Write Protect is off
[ 11.595470] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.596126] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 11.607813] sda: sda1
[ 11.661914] sd 0:0:0:0: [sda] Attached SCSI disk
[ 11.693302] sr0: scsi3-mmc drive: 22x/22x writer cd/rw xa/form2 cdda tray
[ 11.693439] Uniform CD-ROM driver Revision: 3.20
[ 11.698887] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 11.928729] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.930169] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 12.992574] device-mapper: uevent: version 1.0.3
[ 13.002044] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 13.713354] Uniform Multi-Platform E-IDE driver
[ 13.726224] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 15.190242] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 15.259152] ISO 9660 Extensions: RRIP_1991A
[ 15.413221] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.520930] aufs 2-standalone.tree-32-20100125
[ 15.864391] loop: module loaded
[ 16.135152] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 167.281498] udev[611]: starting version 164
[ 171.368132] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 171.865978] sis5595_smbus 0000:00:01.0: Looked for SIS5595 but found unsupported device 5597
[ 171.866141] sis5595_smbus 0000:00:01.0: SIS5595 not detected, module not inserted.
[ 172.095049] ns558 01:01.03: activated
[ 172.196290] gameport: NS558 PnP Gameport is pnp01:01.03/gameport0, io 0x200, speed 627kHz
[ 172.632296] sis630_smbus 0000:00:01.0: SIS630 comp. bus not detected, module not inserted.
[ 172.890693] parport_pc 00:0d: reported by Plug and Play BIOS
[ 172.890958] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 173.300344] pci 0000:00:00.0: Looked for SIS5595 but found unsupported device 5597
[ 174.048397] Error: Driver 'pcspkr' is already registered, aborting...
[ 174.363279] azt2320 01:01.01: activated
[ 174.365897] azt2320 01:01.02: activated
[ 178.587178] mdadm: sending ioctl 1261 to a partition!
[ 178.587310] mdadm: sending ioctl 1261 to a partition!
[ 178.611776] mdadm: sending ioctl 1261 to a partition!
[ 178.611903] mdadm: sending ioctl 1261 to a partition!
[ 178.619302] mdadm: sending ioctl 1261 to a partition!
[ 178.619426] mdadm: sending ioctl 1261 to a partition!
[ 183.056622] NET: Registered protocol family 8
[ 183.056742] NET: Registered protocol family 20
[ 186.026566] eth0: link down
[ 186.028247] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 187.217106] fuse init (API version 7.13)
[ 191.577349] NET: Registered protocol family 15
[ 191.724216] alg: No test for cipher_null (cipher_null-generic)
[ 191.724764] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 191.725276] alg: No test for digest_null (digest_null-generic)
[ 191.725865] alg: No test for compress_null (compress_null-generic)
[ 192.060528] padlock: VIA PadLock Hash Engine not detected.
[ 192.164774] padlock: VIA PadLock Hash Engine not detected.
[ 192.568905] padlock: VIA PadLock not detected.
[ 196.797935] Initializing XFRM netlink socket
[ 238.146137] ip_tables: (C) 2000-2006 Netfilter Core Team
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment