temperature logger arduino + enc28J60

gistfile1.txt

#include <SPI.h>

#include "etherShield.h"
#include <LiquidCrystal.h>
#include "Sensirion.h"
#include <OneWire.h>
#include <DallasTemperature.h>

// please modify the following two lines. mac and ip have to be unique
// in your local area network. You can not have the same numbers in
// two devices:
static uint8_t mymac[6] = {0x54,0x55,0x58,0x10,0x04,0x05}; 
static uint8_t myip[4] = {192,168,1,16};
static char baseurl[]="http://192.168.1.16/";
static uint16_t mywwwport =80; // listen port for tcp/www (max range 1-254)
// or on a different port:
//static char baseurl[]="http://10.0.0.24:88/";
//static uint16_t mywwwport =88; // listen port for tcp/www (max range 1-254)
//
// Default gateway. The ip address of your DSL/Cable router.
static uint8_t gwip[4] = {192,168,1,1};

// ** pachube.com setup **
// IP address of the www.pachube.com server to contact (IP of the first portion of the URL):
static uint8_t pachubeip[4] = {216,52,233,122};

// The name of the virtual host which you want to contact at pachubeip (hostname of the first portion of the URL):
#define PACHUBE_VHOST "api.cosm.com"

// setup yor feed url and API keys here.
#define PACHUBEAPIURL "/v2/feeds/35832/datastreams/4.csv"
#define PACHUBEAPIKEY "X-PachubeApiKey: sj1H0f8qiJocfUu-ajZl6lpX28hzlG14WWxxOPsYDkE"

#define BUFFER_SIZE 500
static uint8_t buf[BUFFER_SIZE+1];
#define STR_BUFFER_SIZE 22
static char strbuf[STR_BUFFER_SIZE+1];

EtherShield es=EtherShield();

// initialize the library with the numbers of the interface pins
// RS 8
// Enable 9
LiquidCrystal lcd(1, 0, 4, 5, 6, 7);

#define SHTdataPin  4
#define SHTclockPin 3
#define LDRpin 0
// Data wire is plugged into port 2 on the Arduino
#define ONE_WIRE_BUS 9

float insideTemp, outsideTemp;
float humidity;
float dewPoint;
unsigned int measureresult;
int LDRval;

// Str version
char insideTempStr[10];
char outsideTempStr[10];
char dewPointStr[10];
char humidityStr[10];
char LDRvalStr[10];

Sensirion tempSensor = Sensirion(SHTdataPin, SHTclockPin);

// Setup a oneWire instance to communicate with any OneWire devices (not just Maxim/Dallas temperature ICs)
OneWire oneWire(ONE_WIRE_BUS);

// Pass our oneWire reference to Dallas Temperature. 
DallasTemperature sensors(&oneWire);

static volatile uint8_t start_web_client=0;  // 0=off but enabled, 1=send update, 2=sending initiated, 3=update was sent OK, 4=diable updates
static uint8_t web_client_attempts=0;
static uint8_t web_client_sendok=0;
static uint8_t resend=0;

// prepare the webpage by writing the data to the tcp send buffer
uint16_t print_webpage(uint8_t *buf);
int8_t analyse_cmd(char *str);

//char * floatToString(char * outstr, float value, int places, int minwidth=, bool rightjustify) {
char * floatToString(char * outstr, float value, int places, int minwidth=0, bool rightjustify=false) {
    // this is used to write a float value to string, outstr.  oustr is also the return value.
    int digit;
    float tens = 0.1;
    int tenscount = 0;
    int i;
    float tempfloat = value;
    int c = 0;
    int charcount = 1;
    int extra = 0;
    // make sure we round properly. this could use pow from <math.h>, but doesn't seem worth the import
    // if this rounding step isn't here, the value  54.321 prints as 54.3209

    // calculate rounding term d:   0.5/pow(10,places)  
    float d = 0.5;
    if (value < 0)
        d *= -1.0;
    // divide by ten for each decimal place
    for (i = 0; i < places; i++)
        d/= 10.0;    
    // this small addition, combined with truncation will round our values properly 
    tempfloat +=  d;

    // first get value tens to be the large power of ten less than value    
    if (value < 0)
        tempfloat *= -1.0;
    while ((tens * 10.0) <= tempfloat) {
        tens *= 10.0;
        tenscount += 1;
    }

    if (tenscount > 0)
        charcount += tenscount;
    else
        charcount += 1;

    if (value < 0)
        charcount += 1;
    charcount += 1 + places;

    minwidth += 1; // both count the null final character
    if (minwidth > charcount){        
        extra = minwidth - charcount;
        charcount = minwidth;
    }

    if (extra > 0 and rightjustify) {
        for (int i = 0; i< extra; i++) {
            outstr[c++] = ' ';
        }
    }

    // write out the negative if needed
    if (value < 0)
        outstr[c++] = '-';

    if (tenscount == 0) 
        outstr[c++] = '0';

    for (i=0; i< tenscount; i++) {
        digit = (int) (tempfloat/tens);
        itoa(digit, &outstr[c++], 10);
        tempfloat = tempfloat - ((float)digit * tens);
        tens /= 10.0;
    }

    // if no places after decimal, stop now and return

    // otherwise, write the point and continue on
    if (places > 0)
    outstr[c++] = '.';


    // now write out each decimal place by shifting digits one by one into the ones place and writing the truncated value
    for (i = 0; i < places; i++) {
        tempfloat *= 10.0; 
        digit = (int) tempfloat;
        itoa(digit, &outstr[c++], 10);
        // once written, subtract off that digit
        tempfloat = tempfloat - (float) digit; 
    }
    if (extra > 0 and not rightjustify) {
        for (int i = 0; i< extra; i++) {
            outstr[c++] = ' ';
        }
    }


    outstr[c++] = '\0';
    return outstr;
}


// Browser callback, where we get to after receiving a reply to an update, should really 
// do somthing here to check all was OK.
void browserresult_callback(uint8_t statuscode,uint16_t datapos){

  if (statuscode==0){
    web_client_sendok++;
    Serial.println("Pachube Ok");
  }
  else
  {
    Serial.print("Pachube error: ");
    Serial.println(statuscode);
  }
  // clear pending state at sucessful contact with the
  // web server even if account is expired:
  if (start_web_client==2) start_web_client=3;
}

// prepare the webpage by writing the data to the tcp send buffer
uint16_t print_webpage(uint8_t *buf)
{
  uint16_t plen;
  char buffer[25]; // just give it plenty to write out any values you want to test

  plen = es.ES_fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 200 OK\r\nContent-Type: text/html\r\nPragma: no-cache\r\n\r\n"));
  // Display full info 
  plen=es.ES_fill_tcp_data_p(buf,plen,PSTR("<h1>Arduino Monitoring</h1><pre>\n"));
  plen=es.ES_fill_tcp_data_p(buf,plen,PSTR("Inside Temp: "));
  plen=es.ES_fill_tcp_data(buf,plen,insideTempStr);
  plen=es.ES_fill_tcp_data_p(buf,plen,PSTR("C\nRel Humidity: "));
  plen=es.ES_fill_tcp_data(buf,plen,humidityStr);
 
  plen=es.ES_fill_tcp_data_p(buf,plen,PSTR("%RH\nDew Point: "));
  plen=es.ES_fill_tcp_data(buf,plen,dewPointStr);

  plen=es.ES_fill_tcp_data_p(buf,plen,PSTR("C\nOutside Temp: "));
  plen=es.ES_fill_tcp_data(buf,plen,outsideTempStr);

  plen=es.ES_fill_tcp_data_p(buf,plen,PSTR("C\nLight Level: "));
  plen=es.ES_fill_tcp_data(buf,plen,LDRvalStr);
  
  plen=es.ES_fill_tcp_data_p(buf,plen,PSTR("%\n</pre>"));
  plen=es.ES_fill_tcp_data_p(buf,plen,PSTR("<a href=\"http://www.pachube.com/feeds/35832/\">Pachube Feed</a>"));
  return(plen);
}

#define STATUS_BUFFER_SIZE 200
// global string buffer for twitter message:
static char statusstr[STATUS_BUFFER_SIZE];

//from http://www.arduino.cc/playground/Code/AvailableMemory
int availableMemory() {
  uint8_t * heapptr, * stackptr;
  stackptr = (uint8_t *)malloc(4);
  heapptr = stackptr;
  free(stackptr);               
  stackptr = (uint8_t *)(SP);
  return stackptr - heapptr;
} 

void setup(){
  
  Serial.begin(57600);
  
  // initialize enc28j60
  es.ES_enc28j60Init(mymac);
  //init the ethernet/ip layer:
  es.ES_init_ip_arp_udp_tcp(mymac,myip, mywwwport);
  // init the web client:
  es.ES_client_set_gwip(gwip);  // e.g internal IP of dsl router
 
    // Start up the library
  sensors.begin();  
  
  lcd.begin(16, 2);
  lcd.print("Starting ...");
  
  Serial.print("Free memory: ");
  Serial.println(availableMemory());
  
}

void loop(){
  uint16_t dat_p;
  int8_t cmd;
  start_web_client=1;
  unsigned long lastSend = millis();
  unsigned long time;
  
   while(1){
    // handle ping and wait for a tcp packet
    dat_p=es.ES_packetloop_icmp_tcp(buf,es.ES_enc28j60PacketReceive(BUFFER_SIZE, buf));
    if(dat_p==0){
      // Nothing received, jus see if there is anythng to do 
          
      time = millis();
      if( time > (lastSend + 30000) ) {
        resend=1; // resend once if it failed
        start_web_client=1;
        lastSend = time;
        Serial.println("Timer > 30 sec");
      }
      
      if (start_web_client==1) {
        Serial.println("Start ...");
        start_web_client=2;
        web_client_attempts++;
        
        Serial.print("Free memory: ");
        Serial.println(availableMemory());        
        
        // Actualisation des sensors
        // SHT11
        measureresult = tempSensor.measure(&insideTemp, &humidity, &dewPoint);
        Serial.print("Result: ");
        Serial.println(measureresult);  
        insideTemp=insideTemp;   // correction de la temperature de l'air
        
        // Dallas
        sensors.requestTemperatures(); // Send the command to get temperatures
        outsideTemp = sensors.getTempCByIndex(0);
        outsideTemp=outsideTemp-0.7;   // correction de la temperature de l'eau
        // LDR
        LDRval = analogRead(LDRpin);
        LDRval = map(LDRval, 0, 1023, 0, 100);        
        
        floatToString(outsideTempStr, outsideTemp, 2);
        floatToString(insideTempStr, insideTemp, 2);
        floatToString(humidityStr, humidity, 2);
        floatToString(dewPointStr, dewPoint, 2);
        itoa(LDRval,LDRvalStr,10);
  
        lcd.setCursor(0, 0); 
        lcd.print("O");
        lcd.print(outsideTempStr);
        lcd.print("C I");
        lcd.print(insideTempStr); 
        lcd.print("C");
        lcd.setCursor(0, 1); 
        lcd.print("H"); 
        lcd.print(humidityStr); 
        lcd.print("% L");
        lcd.print(LDRvalStr);  

        
        Serial.print("LDRval: ");
        Serial.println(LDRvalStr);
        

        // Decide to update pachube or tweet
          // Pachube update
          sprintf( statusstr, "%s", insideTempStr );
          Serial.println(statusstr);
          es.ES_client_set_wwwip(pachubeip);
          
          es.ES_client_http_post(PSTR("/v2/feeds/35832/datastreams/4.csv"),PSTR(PACHUBE_VHOST),PSTR(PACHUBEAPIKEY), PSTR("PUT "), insideTempStr ,&browserresult_callback);
         //  }

    // continue;
    
    dat_p=print_webpage(buf);
    es.ES_www_server_reply(buf,dat_p); // send data
 // }
    
    
    //delay(1000); //attendre une seconde 
    
           sprintf( statusstr, "%s", outsideTempStr );
         Serial.println(statusstr);
         es.ES_client_set_wwwip(pachubeip);
          
         es.ES_client_http_post(PSTR("/v2/feeds/35832/datastreams/5.csv"),PSTR(PACHUBE_VHOST),PSTR(PACHUBEAPIKEY), PSTR("PUT "), outsideTempStr ,&browserresult_callback);
    
       }

      continue;
    }

    dat_p=print_webpage(buf);
    es.ES_www_server_reply(buf,dat_p); // send data
  }
        
}