Skip to content

Instantly share code, notes, and snippets.

/stdin.txt

Created January 5, 2013 17:45
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save anonymous/4462691 to your computer and use it in GitHub Desktop.
Save anonymous/4462691 to your computer and use it in GitHub Desktop.
Download ZIP
stdin
Raw
stdin.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.0.52 (h36sa@giw) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #2 PREEMPT Sat Jan 5 08:20:14 PST 2013
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun4i
[ 0.000000] Memory cut off:
[ 0.000000] MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Memory Reserved:
[ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
[ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
[ 0.000000] G2D : 0x58000000 - 0x58ffffff ( 16 MB)
[ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] BROM Ver: 1100 1100 1623
[ 0.000000] chip-id: A10 (AW1623 revision C)
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c07e04a8, node_mem_map c089d000
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 113792 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda3 loglevel=8 mac_addr= rd.driver.post=sw_ahci_platform,8192cu,mali,sun4i_wemac rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 448MB = 448MB total
[ 0.000000] Memory: 314768k/314768k available, 143984k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB)
[ 0.000000] .text : 0xc0032000 - 0xc079f000 (7604 kB)
[ 0.000000] .data : 0xc07a0000 - 0xc07e8700 ( 290 kB)
[ 0.000000] .bss : 0xc07e8724 - 0xc089cfd8 ( 723 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:96 nr_irqs:96 96
[ 0.000000] timer0: Periodic Mode
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
[ 0.040000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.050000] Initializing cgroup subsys cpuacct
[ 0.050000] Initializing cgroup subsys devices
[ 0.050000] Initializing cgroup subsys freezer
[ 0.060000] Initializing cgroup subsys blkio
[ 0.060000] CPU: Testing write buffer coherency: ok
[ 0.060000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.070000] devtmpfs: initialized
[ 0.070000] print_constraints: dummy:
[ 0.080000] NET: Registered protocol family 16
[ 0.080000] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.090000] [ccmu] try to set apb1 parent to sata_pll failed!
[ 0.090000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[ 0.090000] Initialize DMAC OK
[ 0.100000] bio: create slab <bio-0> at 0
[ 0.100000] SCSI subsystem initialized
[ 0.100000] libata version 3.00 loaded.
[ 0.110000] usbcore: registered new interface driver usbfs
[ 0.110000] usbcore: registered new interface driver hub
[ 0.120000] usbcore: registered new device driver usb
[ 0.120000] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.130000] Bluetooth: Core ver 2.16
[ 0.130000] NET: Registered protocol family 31
[ 0.130000] Bluetooth: HCI device and connection manager initialized
[ 0.140000] Bluetooth: HCI socket layer initialized
[ 0.140000] Bluetooth: L2CAP socket layer initialized
[ 0.150000] Bluetooth: SCO socket layer initialized
[ 0.150000] Init eGon pin module V2.0
[ 0.150000] Switching to clocksource aw 64bits couter
[ 0.160000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.160000] FS-Cache: Loaded
[ 0.160000] CacheFiles: Loaded
[ 0.170000] Switched to NOHz mode on CPU #0
[ 0.170000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
[ 0.170000] [sw_hcd0]: usb host driver initialize........
[ 0.180000] [sw_hcd0]: open_usb_clock
[ 0.200000] [sw_hcd0]: host_init_state = 0
[ 0.200000] [sw_hcd0]: platform is usb host
[ 0.210000] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
[ 0.220000] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
[ 0.230000] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
[ 0.230000] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
[ 0.240000] hub 1-0:1.0: USB hub found
[ 0.240000] hub 1-0:1.0: 1 port detected
[ 0.240000] wrn: hcd is not enable, need not start hcd
[ 0.250000] [sw_hcd0]: sw_usb_host0_disable start
[ 0.250000] -------sw_hcd0_soft_disconnect---------
[ 0.250000] [sw_hcd_host0]: Set USB Power OFF
[ 0.250000] wrn: hcd is not enable, need not stop hcd
[ 0.260000] [sw_hcd0]: close_usb_clock
[ 0.260000] [sw_hcd0]: sw_usb_host0_disable end
[ 0.270000] [sw_udc]: udc_init: version 20080411
[ 0.270000] NET: Registered protocol family 2
[ 0.270000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.280000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.290000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.290000] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.300000] TCP reno registered
[ 0.300000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.310000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.310000] NET: Registered protocol family 1
[ 0.310000] RPC: Registered named UNIX socket transport module.
[ 0.320000] RPC: Registered udp transport module.
[ 0.320000] RPC: Registered tcp transport module.
[ 0.330000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.330000] Trying to unpack rootfs image as initramfs...
[ 0.760000] Freeing initrd memory: 6492K
[ 0.760000] [pm]aw_pm_init!
[ 0.760000] audit: initializing netlink socket (disabled)
[ 0.770000] type=2000 audit(0.769:1): initialized
[ 0.780000] VFS: Disk quotas dquot_6.5.2
[ 0.780000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.790000] NTFS driver 2.1.30 [Flags: R/W].
[ 0.800000] fuse init (API version 7.16)
[ 0.800000] msgmni has been set to 627
[ 0.810000] alg: No test for stdrng (krng)
[ 0.810000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.820000] io scheduler noop registered
[ 0.820000] io scheduler deadline registered
[ 0.820000] io scheduler cfq registered (default)
[ 0.830000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.850000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[ 1.540000] console [ttyS0] enabled
[ 1.550000] [uart]: used uart info.: 0x05
[ 1.570000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[ 1.590000] [uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
[ 1.620000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
[ 1.630000] [uart]: serial probe 2, membase (null) irq 3 mapbase 0x01c28800
[ 1.650000] G2D: drv_g2d_init
[ 1.650000] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
[ 1.660000] G2D: head:d8000000,tail:d9000000
[ 1.670000] G2D: Module initialized.major:252
[ 1.680000] brd: module loaded
[ 1.680000] loop: module loaded
[ 1.690000] [NAND]nand driver, init.
[ 1.700000] cmu_clk is 360
[ 1.700000] nand clk init end
[ 1.700000] offset 0xc: 0x6140
[ 1.710000] offset 0x14: 0x82000008
[ 1.720000] [NAND] nand gpio_request
[ 1.720000] [NAND] nand driver version: 0x2 0x9
[ 1.730000] nand interrupte register ok
[ 1.740000] ret of NFC_ChangMode is 0
[ 1.740000] dma_hdle is 0
[ 1.750000] dma_hdle is 10000008
[ 1.750000] cmu_clk is 360
[ 1.760000] nand clk init end
[ 1.760000] offset 0xc: 0x6140
[ 1.770000] offset 0x14: 0x82000005
[ 1.790000] The 0 disk name = DEVICE, class name = NAND, disk start = 0, disk size = 7782400
[ 1.810000] The 1 disk name = bootloader, type = 0, class name = DISK, disk size = 32768
[ 1.820000] The 2 disk name = env, type = 0, class name = DISK, disk size = 32768
[ 1.830000] The 3 disk name = boot, type = 0, class name = DISK, disk size = 65536
[ 1.850000] The 4 disk name = system, type = 0, class name = DISK, disk size = 1048576
[ 1.860000] The 5 disk name = data, type = 1, class name = DISK, disk size = 3145728
[ 1.880000] The 6 disk name = misc, type = 0, class name = DISK, disk size = 32768
[ 1.890000] The 7 disk name = recovery, type = 0, class name = DISK, disk size = 65536
[ 1.910000] The 8 disk name = cache, type = 0, class name = DISK, disk size = 262144
[ 1.920000] The 9 disk name = private, type = 0, class name = DISK, disk size = 32768
[ 1.930000] The 10 disk name = sysrecovery, type = 0, class name = DISK, disk size = 1048576
[ 1.950000] The 11 disk name = UDISK, type = 0, class name = DISK, disk size = 0
[ 1.960000] The 11 disk size = 1982464
[ 1.970000] part total count = 12
[ 1.980000] nand: unknown partition table
[ 1.980000] nanda:
[ 1.990000] nandb: unknown partition table
[ 2.000000] nandc: unknown partition table
[ 2.010000] nandd: unknown partition table
[ 2.010000] nande: unknown partition table
[ 2.020000] nandf: unknown partition table
[ 2.030000] nandg: unknown partition table
[ 2.040000] nandh: unknown partition table
[ 2.050000] nandi:
[ 2.050000] nandj: unknown partition table
[ 2.060000] nandk:
[ 2.070000] benn: nand probe enter
[ 2.070000] [NAND]nand driver, ok.
[ 2.080000] err: gpio count < =0 ,gpio_count is: 0
[ 2.090000] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
[ 2.100000] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
[ 2.110000] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 2.120000] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
[ 2.140000] scsi0 : sw_ahci_platform
[ 2.150000] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 56
[ 2.160000] wemac Ethernet Driver, V1.01 in file:drivers/net/sun4i/sun4i_wemac.c
[ 2.170000] [EMAC] ahb clk enable
[ 2.180000] [EMAC] ahb gate clk: 0x2026140
[ 2.220000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.230000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.240000] [sw-ehci1]: open clock
[ 2.270000] [sw-ehci1]: Set USB Power ON
[ 2.270000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.290000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
[ 2.300000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
[ 2.330000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
[ 2.330000] ehci_irq: port change detect
[ 2.340000] hub 2-0:1.0: USB hub found
[ 2.350000] hub 2-0:1.0: 1 port detected
[ 2.360000] [sw-ohci1]: open clock
[ 2.380000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.390000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
[ 2.410000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
[ 2.480000] hub 3-0:1.0: USB hub found
[ 2.490000] hub 3-0:1.0: 1 port detected
[ 2.490000] [sw-ehci2]: open clock
[ 2.520000] [sw-ehci2]: Set USB Power ON
[ 2.530000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.540000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.550000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
[ 2.560000] ata1.00: ATA-8: WDC WD2500BEVS-60UST0, 01.01A01, max UDMA/100
[ 2.580000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
[ 2.590000] ata1.00: 488397168 sectors, multi 0: LBA48
[ 2.600000] ata1.00: configured for UDMA/100
[ 2.620000] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-6 01.0 PQ: 0 ANSI: 5
[ 2.630000] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.650000] sd 0:0:0:0: [sda] Write Protect is off
[ 2.650000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.660000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.710000] usb 2-1: new high speed USB device number 2 using sw-ehci
[ 2.730000] sda: sda1 sda2 sda3 sda4
[ 2.740000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
[ 2.750000] ehci_irq: port change detect
[ 2.760000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.770000] hub 4-0:1.0: USB hub found
[ 2.770000] hub 4-0:1.0: 1 port detected
[ 2.780000] [sw-ehci2]: disable ehci
[ 2.780000] sw-ehci sw-ehci.2: remove, state 1
[ 2.790000] usb usb4: USB disconnect, device number 1
[ 2.800000] sw-ehci sw-ehci.2: USB bus 4 deregistered
[ 2.810000] [sw-ehci2]: Set USB Power OFF
[ 2.820000] [sw-ehci2]: close clock
[ 2.820000] [sw-ohci2]: open clock
[ 2.850000] [sw-ohci2]: Set USB Power ON
[ 2.860000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.870000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
[ 2.880000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
[ 2.910000] hub 2-1:1.0: USB hub found
[ 2.910000] hub 2-1:1.0: 4 ports detected
[ 2.950000] hub 4-0:1.0: USB hub found
[ 2.960000] hub 4-0:1.0: 1 port detected
[ 2.960000] [sw-ohci2]: disable ohci
[ 2.970000] sw-ohci sw-ohci.2: remove, state 1
[ 2.980000] usb usb4: USB disconnect, device number 1
[ 2.990000] sw-ohci sw-ohci.2: USB bus 4 deregistered
[ 3.000000] [sw-ohci2]: Set USB Power OFF
[ 3.000000] [sw-ohci2]: close clock
[ 3.010000] Initializing USB Mass Storage driver...
[ 3.020000] usbcore: registered new interface driver usb-storage
[ 3.030000] USB Mass Storage support registered.
[ 3.040000] usbcore: registered new interface driver ums-alauda
[ 3.050000] usbcore: registered new interface driver ums-cypress
[ 3.060000] usbcore: registered new interface driver ums-datafab
[ 3.070000] usbcore: registered new interface driver ums_eneub6250
[ 3.080000] usbcore: registered new interface driver ums-freecom
[ 3.090000] usbcore: registered new interface driver ums-isd200
[ 3.100000] usbcore: registered new interface driver ums-jumpshot
[ 3.110000] usbcore: registered new interface driver ums-karma
[ 3.120000] usbcore: registered new interface driver ums-onetouch
[ 3.140000] usbcore: registered new interface driver ums-realtek
[ 3.150000] usbcore: registered new interface driver ums-sddr09
[ 3.160000] usbcore: registered new interface driver ums-sddr55
[ 3.170000] usbcore: registered new interface driver ums-usbat
[ 3.180000] mousedev: PS/2 mouse device common for all mice
[ 3.190000] sunxi RTC version 0.1
[ 3.200000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
[ 3.210000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[ 3.220000] sunxi-rtc sunxi-rtc: read time 2013-1-5 17:44:17
[ 3.230000] using rtc device, rtc, for alarms
[ 3.230000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[ 3.250000] i2c /dev entries driver
[ 3.250000] !!! base_Addr = 0xdc8d4c00
[ 3.260000] config i2c gpio with gpio_config api
[ 3.270000] twi0, apb clock = 24000000
[ 3.270000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
[ 3.280000] usb 2-1.1: new low speed USB device number 3 using sw-ehci
[ 3.300000] I2C: i2c-0: AW16XX I2C adapter
[ 3.300000] **********start************
[ 3.310000] 0x40
[ 3.310000] 0xf8
[ 3.320000] 0x28
[ 3.320000] 0x0
[ 3.320000] 0x0
[ 3.320000] **********end************
[ 3.330000] !!! base_Addr = 0xdc8d6000
[ 3.340000] twi1, apb clock = 24000000
[ 3.340000] I2C: i2c-1: AW16XX I2C adapter
[ 3.350000] **********start************
[ 3.360000] 0x40
[ 3.360000] 0xf8
[ 3.360000] 0x58
[ 3.360000] 0x0
[ 3.370000] 0x0
[ 3.370000] **********end************
[ 3.370000] !!! base_Addr = 0xdc8d8400
[ 3.380000] twi2, apb clock = 24000000
[ 3.390000] I2C: i2c-2: AW16XX I2C adapter
[ 3.390000] **********start************
[ 3.400000] 0x40
[ 3.400000] 0xf8
[ 3.410000] 0x58
[ 3.410000] 0x0
[ 3.410000] 0x0
[ 3.410000] **********end************
[ 3.420000] lirc_dev: IR Remote Control driver registered, major 251
[ 3.430000] IR NEC protocol handler initialized
[ 3.440000] IR RC5(x) protocol handler initialized
[ 3.450000] IR RC6 protocol handler initialized
[ 3.460000] IR JVC protocol handler initialized
[ 3.460000] IR Sony protocol handler initialized
[ 3.470000] IR RC5 (streamzap) protocol handler initialized
[ 3.480000] IR LIRC bridge handler initialized
[ 3.490000] Linux video capture interface: v2.00
[ 3.500000] [cedar dev]: install start!!!
[ 3.510000] [cedar dev]: install end!!!
[ 3.510000] [ace_drv] start!!!
[ 3.520000] [ace_drv] init end!!!
[ 3.520000] [pa_drv] start!!!
[ 3.530000] [pa_drv] init end!!!
[ 3.530000] print_constraints: axp20_ldo1: 1300 mV
[ 3.540000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[ 3.560000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[ 3.570000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[ 3.580000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
[ 3.600000] usb 2-1.2: new low speed USB device number 4 using sw-ehci
[ 3.610000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
[ 3.620000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[ 3.640000] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
[ 3.670000] Bluetooth: HCI UART driver ver 2.2
[ 3.680000] Bluetooth: HCI H4 protocol initialized
[ 3.690000] Bluetooth: HCI BCSP protocol initialized
[ 3.690000] Bluetooth: HCILL protocol initialized
[ 3.700000] cpuidle: using governor ladder
[ 3.710000] cpuidle: using governor menu
[ 3.720000] [mmc_pm]: no sdio card used in configuration
[ 3.730000] [mmc]: sunximmc_init
[ 3.730000] [mmc]: sunxi mmc controller using config : 0xb
[ 3.740000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[ 3.750000] [mmc]: mmc 0 power off !!
[ 3.760000] [mmc]: mmc0 Probe: base:0xdc8e0000 irq:32 dma:0 pdes:0xc5120000, ret 0.
[ 3.770000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
[ 3.790000] [mmc]: mmc 1 power off !!
[ 3.790000] [mmc]: mmc1 Probe: base:0xdc8e2000 irq:33 dma:0 pdes:0xc5124000, ret 0.
[ 3.810000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
[ 3.820000] [mmc]: mmc 3 power off !!
[ 3.820000] [mmc]: mmc3 Probe: base:0xdc8e4000 irq:35 dma:0 pdes:0xc5128000, ret 0.
[ 3.840000] input: Logitech USB Optical Mouse as /devices/platform/sw-ehci.1/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
[ 3.860000] generic-usb 0003:046D:C05A.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-sw-ehci-1.1/input0
[ 3.890000] input: CHICONY USB Keyboard as /devices/platform/sw-ehci.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
[ 3.910000] generic-usb 0003:04F2:0116.0002: input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-sw-ehci-1.2/input0
[ 3.930000] usbcore: registered new interface driver usbhid
[ 3.940000] usbhid: USB HID core driver
[ 3.950000] enter sun4i Audio codec!!!
[ 3.950000] sun4i audio support initialized
[ 3.960000] sun4i Audio codec successfully loaded..
[ 3.970000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
[ 3.980000] ALSA device list:
[ 3.990000] #0: sun4i-CODEC Audio Codec
[ 3.990000] #1: sun4i-sndhdmi
[ 4.000000] IPv4 over IPv4 tunneling driver
[ 4.010000] TCP cubic registered
[ 4.010000] Initializing XFRM netlink socket
[ 4.020000] NET: Registered protocol family 10
[ 4.030000] NET: Registered protocol family 17
[ 4.040000] NET: Registered protocol family 15
[ 4.050000] Bluetooth: RFCOMM TTY layer initialized
[ 4.060000] Bluetooth: RFCOMM socket layer initialized
[ 4.060000] Bluetooth: RFCOMM ver 1.11
[ 4.070000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.080000] Bluetooth: BNEP filters: protocol multicast
[ 4.090000] 802.1Q VLAN Support v1.8
[ 4.100000] [mmc_pm]: No sdio card, please check your config !!
[ 4.110000] Registering the dns_resolver key type
[ 4.120000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 4.130000] Registering SWP/SWPB emulation handler
[ 4.140000] registered taskstats version 1
[ 4.150000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
[ 4.160000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
[ 4.180000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
[ 4.190000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
[ 4.210000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
[ 4.220000] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
[ 4.230000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[ 4.240000] sunxi-rtc sunxi-rtc: read time 2013-1-5 17:44:18
[ 4.250000] sunxi-rtc sunxi-rtc: setting system clock to 2013-01-05 17:44:18 UTC (1357407858)
[ 4.270000] Freeing init memory: 168K
[ 4.460000] dracut: dracut- dracut-
[ 4.760000] [mmc]: mmc 0 detect change, present 1
[ 4.840000] udevd[110]: starting version 175
[ 5.060000] [mmc]: mmc 0 power on !!
[ 5.100000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
[ 5.110000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
[ 5.140000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 5.150000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 5.160000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 5.170000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 5.210000] mmc0: new SD card at address 9163
[ 5.250000] mmcblk0: mmc0:9163 SD02G 1.84 GiB
[ 5.290000] mmcblk0: p1 p2 p3
[ 5.680000] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 6.400000] dracut: Checking ext4: /dev/sda3
[ 6.410000] dracut: issuing e2fsck -a /dev/sda3
[ 6.590000] dracut: /dev/sda3: clean, 266945/3080192 files, 1550516/12320768 blocks
[ 6.610000] dracut: Remounting /dev/sda3 with -o ro
[ 6.710000] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 6.820000] dracut: Mounted root filesystem /dev/sda3
[ 7.400000] dracut: Switching root
[ 8.180000] init: ureadahead main process (276) terminated with status 5
[ 10.630000] udevd[381]: starting version 175
[ 11.540000] sunxi disp driver loaded (/dev/disp api 1.0)
[ 14.670000] wemac wemac.0: WARNING: no IRQ resource flags set.
[ 14.810000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 15.420000] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k
[ 15.610000] init: udev-fallback-graphics main process (660) terminated with status 1
[ 15.850000] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 16.690000] Console: switching to colour frame buffer device 160x45
[ 16.900000] UMP<2>: Inserting UMP device driver. Compiled: Jan 4 2013, time: 21:31:24
[ 16.920000] UMP<2>: Using OS memory backend, allocation limit: 134217728
[ 16.930000] UMP: UMP device driver loaded
[ 17.010000] mali: use config clk_div 4
[ 17.010000] mali: clk_div 4
[ 17.010000] Mali: mali clock set completed, clock is 240000000 Mhz
[ 17.020000] mali: use config clk_div 4
[ 17.020000] mali: clk_div 4
[ 17.020000] Mali: mali clock set completed, clock is 240000000 Mhz
[ 17.050000] Mali: Mali device driver loaded
[ 17.220000] [drm] Initialized drm 1.1.0 20060810
[ 17.240000] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 17.240000] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
[ 17.250000] [mmc_pm]: No sdio card, please check your config !!
[ 17.310000] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 17.310000] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
[ 17.960000] [sw-ehci2]: enable ehci
[ 17.960000] [sw-ehci2]: open clock
[ 17.990000] [sw-ehci2]: Set USB Power ON
[ 17.990000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 18.010000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
[ 18.020000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
[ 18.060000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
[ 18.060000] ehci_irq: port change detect
[ 18.060000] hub 4-0:1.0: USB hub found
[ 18.080000] hub 4-0:1.0: 1 port detected
[ 18.090000] [sw-ohci2]: enable ohci
[ 18.090000] [sw-ohci2]: open clock
[ 18.170000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 18.180000] init: failsafe main process (766) killed by TERM signal
[ 18.190000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
[ 18.200000] init: gator-daemon main process (784) terminated with status 1
[ 18.210000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
[ 18.280000] hub 5-0:1.0: USB hub found
[ 18.280000] hub 5-0:1.0: 1 port detected
[ 18.310000] usbcore: registered new interface driver rtl8192cu
[ 18.410000] usb 4-1: new high speed USB device number 2 using sw-ehci
[ 22.990000] init: hybrid-gfx main process (888) terminated with status 1
[ 24.950000] eth0: no IPv6 routers present
[ 25.970000] UMP<2>: New session opened
[ 26.400000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.970000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.990000] UMP<1>: No handler for IOCTL. cmd: 0x400c9007, arg: 0xbee7cbb8
[ 26.990000] UMP<1>: No handler for IOCTL. cmd: 0x400c9007, arg: 0xbee7cad0
[ 27.030000] UMP<1>: No handler for IOCTL. cmd: 0x400c9007, arg: 0xbee7cb58
[ 27.540000] UMP<1>: No handler for IOCTL. cmd: 0x400c9007, arg: 0xbee7caa0
[ 27.540000] UMP<1>: No handler for IOCTL. cmd: 0x400c9007, arg: 0xbee7caa0
[ 28.790000] init: plymouth-stop pre-start process (1156) terminated with status 1
[ 28.880000] init: tty1 main process (1157) killed by TERM signal
[ 29.140000] UMP<2>: Session closed
[ 29.390000] UMP<2>: New session opened
[ 29.640000] UMP<1>: No handler for IOCTL. cmd: 0x400c9007, arg: 0xbee8fbb8
[ 29.660000] UMP<1>: No handler for IOCTL. cmd: 0x400c9007, arg: 0xbee8fad0
[ 29.660000] UMP<1>: No handler for IOCTL. cmd: 0x400c9007, arg: 0xbee8fb58
[ 30.110000] UMP<1>: No handler for IOCTL. cmd: 0x400c9007, arg: 0xbee8faa0
[ 30.160000] UMP<1>: No handler for IOCTL. cmd: 0x400c9007, arg: 0xbee8faa0
[ 32.990000] UMP<2>: Session closed
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment