gistcli - Paste

file1.txt

        am33xx_pinmux: pinmux@44e10800 {
                pinctrl-names = "default";
                pinctrl-0 = <&user_leds_s0 &spi1_pins_s0 &lcd_pins_s0 &gpevt_pins_s0>;

                user_leds_s0: user_leds_s0 {
                        pinctrl-single,pins = <
                                0x54 0x7        /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
                                0x58 0x17       /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
                                0x5c 0x7        /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
                                0x60 0x17       /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
                        >;
                };

                spi1_pins_s0: spi1_pins_s0 {
                        pinctrl-single,pins = <
                                0x190 0x33      /* mcasp0_aclkx.spi1_sclk, INPUT_PULLUP | MODE3 */
                                0x194 0x33      /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */
                                0x198 0x13      /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */
                                0x19c 0x13      /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */
                        >;
                };
...

&spi1 {
        status = "ok";

        spidev@0 {
                compatible = "spidev";
                spi-max-frequency = <25000000>;
                reg = <0>;
                spi-cpol;
                spi-cpha;
        };
};