CLFS for Raspberry Pi

add_cross_compiler_to_env.sh

echo export CC=\""${CLFS_TARGET}-gcc\"" >> ~/.bashrc
echo export CXX=\""${CLFS_TARGET}-g++\"" >> ~/.bashrc
echo export AR=\""${CLFS_TARGET}-ar\"" >> ~/.bashrc
echo export AS=\""${CLFS_TARGET}-as\"" >> ~/.bashrc
echo export LD=\""${CLFS_TARGET}-ld\"" >> ~/.bashrc
echo export RANLIB=\""${CLFS_TARGET}-ranlib\"" >> ~/.bashrc
echo export READELF=\""${CLFS_TARGET}-readelf\"" >> ~/.bashrc
echo export STRIP=\""${CLFS_TARGET}-strip\"" >> ~/.bashrc
source ~/.bashrc

add_groups.sh

cat > ${CLFS}/etc/group << "EOF"
root:x:0:
bin:x:1:
sys:x:2:
kmem:x:3:
tty:x:4:
tape:x:5:
daemon:x:6:
floppy:x:7:
disk:x:8:
lp:x:9:
dialout:x:10:
audio:x:11:
video:x:12:
utmp:x:13:
usb:x:14:
cdrom:x:15:
EOF

add_shadow.sh

cat > ${CLFS}/etc/passwd << "EOF"
root::0:0:root:/root:/bin/ash
EOF

add_user.sh

# Add the clfs group
groupadd clfs

# Add the clfs user
useradd -s /bin/bash -g clfs -m -k /dev/null clfs

# Give clfs a password
passwd clfs

# Log in as the new user
su - clfs

bootscripts.sh

cd $CLFS_SRC
tar -zxvf clfs-embedded-bootscripts-1.0-pre5.tar.bz2 && cd clfs-embedded-bootscripts-1.0-pre5
make DESTDIR=${CLFS} install-bootscripts
install -dv ${CLFS}/etc/init.d
ln -sv ../rc.d/startup ${CLFS}/etc/init.d/rcS
cd $CLFS_SRC && rm -rf clfs-embedded-bootscripts-1.0-pre5.tar.bz2

build_cross_compiler.sh

# Linux headers
cd $CLFS_SRC/linux
make mrproper
make ARCH=${CLFS_ARCH} headers_check
make ARCH=${CLFS_ARCH} INSTALL_HDR_PATH=dest headers_install
cp -rv dest/include/* ${CLFS}/usr/include

# GMP
cd $CLFS_SRC
tar -jxvf gmp-5.0.1.tar.bz2 && cd gmp-5.0.1
CPPFLAGS=-fexceptions ./configure \
    --prefix=${CLFS_CROSS_TOOLS}
make
make check
make install
cd $CLFS_SRC && rm -rf gmp-5.0.1

# MPFR
cd $CLFS_SRC
tar -jxvf mpfr-3.0.0.tar.bz2 && cd mpfr-3.0.0
LDFLAGS="-Wl,-rpath,${CLFS_CROSS_TOOLS}/lib" \
  ./configure --prefix=${CLFS_CROSS_TOOLS} --enable-shared \
  --with-gmp=${CLFS_CROSS_TOOLS}
make
make install
cd $CLFS_SRC && rm -rf mpfr-3.0.0

# MPC
cd $CLFS_SRC
tar -zxvf mpc-0.9.tar.gz && cd mpc-0.9
LDFLAGS="-Wl,-rpath,${CLFS_CROSS_TOOLS}/lib" \
  ./configure --prefix=${CLFS_CROSS_TOOLS} \
      --with-gmp=${CLFS_CROSS_TOOLS} \
      --with-mpfr=${CLFS_CROSS_TOOLS}
make
make install
cd $CLFS_SRC && rm -rf mpc-0.9

# Binutils
cd $CLFS_SRC
tar -jxvf binutils-2.21.1a.tar.bz2 && mkdir -v binutils-build && cd binutils-build
../binutils-2.21.1/configure --prefix=${CLFS_CROSS_TOOLS} \
   --target=${CLFS_TARGET} --with-sysroot=${CLFS} --disable-nls \
   --enable-shared --disable-multilib
make configure-host
make
make install
cp -v ../binutils-2.21.1/include/libiberty.h ${CLFS}/usr/include
cd $CLFS_SRC && rm -rf binutils-2.21.1 && rm -rf binutils-build

# GCC
cd $CLFS_SRC
tar -jxvf gcc-4.6.0.tar.bz2 && mkdir -v gcc-build && cd gcc-build
AR=ar LDFLAGS="-Wl,-rpath,${CLFS_CROSS_TOOLS}/lib" \
  ../gcc-4.6.0/configure --prefix=${CLFS_CROSS_TOOLS} \
  --build=${CLFS_HOST} --host=${CLFS_HOST} --target=${CLFS_TARGET} \
  --with-sysroot=${CLFS} --disable-nls  --disable-shared \
  --with-mpfr=${CLFS_CROSS_TOOLS} --with-gmp=${CLFS_CROSS_TOOLS} \
  --with-mpc=${CLFS_CROSS_TOOLS} --without-headers --with-newlib \
  --disable-decimal-float --disable-libgomp --disable-libmudflap \
  --disable-libssp --disable-threads --enable-languages=c,c++ \
  --disable-multilib --with-abi=${CLFS_ABI} --with-arch=${CLFS_ARM_ARCH} \
  --with-mode=${CLFS_ARM_MODE} --with-float=${CLFS_FLOAT} \
  --with-fpu=${CLFS_FPU}
make all-gcc all-target-libgcc
make install-gcc install-target-libgcc
cd $CLFS_SRC && rm -rf gcc-4.6.0 && rm -rf gcc-build

# uClibc
cd $CLFS_SRC
tar -jxvf uClibc-0.9.31.tar.bz2 && cd uClibc-0.9.31
patch -Np1 -i ../uClibc-0.9.31-configs-2.patch
sed -i".bak" '/_init, .-_init/d' libc/sysdeps/linux/arm/crtn.S
sed -i".bak" '/_fini, .-_fini/d' libc/sysdeps/linux/arm/crtn.S
cp -v clfs/config.${CLFS_ARCH}.${CLFS_ENDIAN} .config
if [ "${CLFS_ABI}" == "aapcs" ] || [ "${CLFS_ABI}" == "aapcs-linux" ]; \
  then sed -i s/CONFIG_ARM_OABI/CONFIG_ARM_EABI/g .config; fi
make oldconfig
make
make PREFIX=${CLFS} install
cd $CLFS_SRC && rm -rf uClibc-0.9.31

# GCC - second (final) iteration
cd $CLFS_SRC
tar -jxvf gcc-4.6.0.tar.bz2 && mkdir -v gcc-build && cd gcc-build
AR=ar LDFLAGS="-Wl,-rpath,${CLFS_CROSS_TOOLS}/lib" \
  ../gcc-4.6.0/configure --prefix=${CLFS_CROSS_TOOLS} \
  --build=${CLFS_HOST} --target=${CLFS_TARGET} --host=${CLFS_HOST} \
  --with-sysroot=${CLFS} --disable-nls --enable-shared \
  --enable-languages=c,c++ --enable-c99 --enable-long-long \
  --with-mpfr=${CLFS_CROSS_TOOLS} --with-gmp=${CLFS_CROSS_TOOLS} \
  --with-mpc=${CLFS_CROSS_TOOLS} --disable-multilib \
  --with-abi=${CLFS_ABI} --with-arch=${CLFS_ARM_ARCH} \
  --with-mode=${CLFS_ARM_MODE} --with-float=${CLFS_FLOAT} \
  --with-fpu=${CLFS_FPU}
make
make install
cp -v ${CLFS_CROSS_TOOLS}/${CLFS_TARGET}/lib/libgcc_s.so.1 ${CLFS}/lib
cd $CLFS_SRC && rm -rf gcc-4.6.0 && rm -rf gcc-build

build_iana_etc.sh

cd $CLFS_SRC
tar -jxvf iana-etc-2.30.tar.bz2 && cd iana-etc-2.30
patch -Np1 -i ../iana-etc-2.30-update-1.patch
make get
make
make DESTDIR=${CLFS} install
cd $CLFS_SRC && rm -rf iana-etc-2.30

build_kernel.sh

# Set cross-compiler target (notice the '-' in the end)
CLFS_CROSS_COMPILE=${CLFS_CROSS_TOOLS}/bin/${CLFS_TARGET}-

# Build kernel
cd $CLFS_SRC/linux
make mrproper
ARCH=arm make bcmrpi_cutdown_defconfig
ARCH=arm CROSS_COMPILE=${CLFS_CROSS_COMPILE} make oldconfig
ARCH=arm CROSS_COMPILE=${CLFS_CROSS_COMPILE} make
ARCH=arm CROSS_COMPILE=${CLFS_CROSS_COMPILE} make modules_install INSTALL_MOD_PATH=${CLFS}/boot
cd $CLFS_SRC

# Do some magic with the Raspberry Pi kernel image creator
cd $CLFS_TOOLS/tools/mkimage
./imagetool-uncompressed.py $CLFS_SRC/linux/arch/arm/boot/Image
cp -v kernel.img $CLFS/boot/

cmdline.sh

sudo sh -c 'cat > /mnt/clfs/boot/cmdline.txt << "EOF"
root=/dev/mmcblk0p2 rootdelay=2
EOF'

compile_busybox.sh

cd $CLFS_SRC
tar -jxvf busybox-1.18.4.tar.bz2 && cd busybox-1.18.4
patch -Np1 -i ../busybox-1.18.4-config-1.patch
cp -v clfs/config .config
make oldconfig
make CROSS_COMPILE="${CLFS_TARGET}-"
make CROSS_COMPILE="${CLFS_TARGET}-" CONFIG_PREFIX="${CLFS}" install
cp examples/depmod.pl ${CLFS_CROSS_TOOLS}/bin
chmod 755 ${CLFS_CROSS_TOOLS}/bin/depmod.pl
cd $CLFS_SRC && rm -rf busybox-1.18.4

create_build_env.sh

# Create build directories
mkdir -pv ~/build/clfs/{sources,firmware,tools,cross-tools,rootfs}

export CLFS=$HOME/build/clfs/rootfs
export CLFS_SRC=$HOME/build/clfs/sources
export CLFS_FW=$HOME/build/clfs/firmware
export CLFS_TOOLS=$HOME/build/clfs/tools
export CLFS_CROSS_TOOLS=$HOME/build/clfs/cross-tools

# Make sure the environment is set up every time you log in
# Create a bash_profile
cat > ~/.bash_profile << "EOF"
exec env -i HOME=${HOME} TERM=${TERM} PS1='\u:\w\$ ' /bin/bash
EOF

# And a bashrc
cat > ~/.bashrc << "EOF"
set +h
umask 022
CLFS=$HOME/build/clfs/rootfs
CLFS_SRC=$HOME/build/clfs/sources
CLFS_FW=$HOME/build/clfs/firmware
CLFS_TOOLS=$HOME/build/clfs/tools
CLFS_CROSS_TOOLS=$HOME/build/clfs/cross-tools
LC_ALL=POSIX
PATH=${CLFS_CROSS_TOOLS}/bin:/bin:/usr/bin
export CLFS CLFS_SRC CLFS_FW CLFS_TOOLS CLFS_CROSS_TOOLS LC_ALL PATH
EOF

create_fhs.sh

mkdir -pv ${CLFS}/{bin,boot,dev,{etc/,}opt,home,lib/{firmware,modules},mnt}
mkdir -pv ${CLFS}/{proc,media/{floppy,cdrom},sbin,srv,sys}
mkdir -pv ${CLFS}/var/{lock,log,mail,run,spool}
mkdir -pv ${CLFS}/var/{opt,cache,lib/{misc,locate},local}
install -dv -m 0750 ${CLFS}/root
install -dv -m 1777 ${CLFS}{/var,}/tmp
mkdir -pv ${CLFS}/usr/{,local/}{bin,include,lib,sbin,src}
mkdir -pv ${CLFS}/usr/{,local/}share/{doc,info,locale,man}
mkdir -pv ${CLFS}/usr/{,local/}share/{misc,terminfo,zoneinfo}
mkdir -pv ${CLFS}/usr/{,local/}share/man/man{1,2,3,4,5,6,7,8}
for dir in ${CLFS}/usr{,/local}; do
  ln -sv share/{man,doc,info} ${dir}
done

cross_compiler.sh

# Clear compiler flags
unset CFLAGS
unset CXXFLAGS

# Set ABI
export CLFS_ABI=aapcs-linux

# Set host and target
export CLFS_HOST=$(echo ${MACHTYPE} | sed "s/-[^-]*/-cross/")
export CLFS_TARGET=arm-unknown-linux-uclibcgnueabi

# Set architecture and endianess
export CLFS_ARCH=arm
export CLFS_ENDIAN=little

# Set specific ARM architecture
export CLFS_ARM_ARCH=armv6zk
export CLFS_ARM_MODE=arm

# Set hw float of type vfp
export CLFS_FLOAT=hard
export CLFS_FPU=vfp

# Add to bashrc
echo unset CFLAGS >> ~/.bashrc
echo unset CXXFLAGS >> ~/.bashrc
echo export CLFS_ABI=\""${CLFS_ABI}\"" >> ~/.bashrc
echo export CLFS_HOST=\""${CLFS_HOST}\"" >> ~/.bashrc
echo export CLFS_TARGET=\""${CLFS_TARGET}\"" >> ~/.bashrc
echo export CLFS_ARCH=\""${CLFS_ARCH}\"" >> ~/.bashrc
echo export CLFS_ENDIAN=\""${CLFS_ENDIAN}\"" >> ~/.bashrc
echo export CLFS_ARM_ARCH=\""${CLFS_ARM_ARCH}\"" >> ~/.bashrc
echo export CLFS_ARM_MODE=\""${CLFS_ARM_MODE}\"" >> ~/.bashrc
echo export CLFS_FLOAT=\""${CLFS_FLOAT}\"" >> ~/.bashrc
echo export CLFS_FPU=\""${CLFS_FPU}\"" >> ~/.bashrc

dhcp.sh

cat > ${CLFS}/etc/udhcpc.conf << "EOF"
#!/bin/sh
# udhcpc Interface Configuration
# Based on http://lists.debian.org/debian-boot/2002/11/msg00500.html
# udhcpc script edited by Tim Riker <Tim@Rikers.org>

[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1

RESOLV_CONF="/etc/resolv.conf"
RESOLV_BAK="/etc/resolv.bak"

[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
[ -n "$subnet" ] && NETMASK="netmask $subnet"

case "$1" in
        deconfig)
                if [ -f "$RESOLV_BAK" ]; then
                        mv "$RESOLV_BAK" "$RESOLV_CONF"
                fi
                /sbin/ifconfig $interface 0.0.0.0
                ;;

        renew|bound)
                /sbin/ifconfig $interface $ip $BROADCAST $NETMASK

                if [ -n "$router" ] ; then
                        while route del default gw 0.0.0.0 dev $interface ; do
                                true
                        done

                        for i in $router ; do
                                route add default gw $i dev $interface
                        done
                fi

                if [ ! -f "$RESOLV_BAK" ] && [ -f "$RESOLV_CONF" ]; then
                        mv "$RESOLV_CONF" "$RESOLV_BAK"
                fi

                echo -n > $RESOLV_CONF
                [ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
                for i in $dns ; do
                        echo nameserver $i >> $RESOLV_CONF
                done
                ;;
esac

exit 0
EOF

chmod +x ${CLFS}/etc/udhcpc.conf

download_sw.sh

cd $CLFS_SRC

# Binutils
wget http://ftp.gnu.org/gnu/binutils/binutils-2.21.1a.tar.bz2

# Busybox
wget http://busybox.net/downloads/busybox-1.18.4.tar.bz2

# CLFS bootscripts
wget http://cross-lfs.org/files/packages/embedded-0.0.1/clfs-embedded-bootscripts-1.0-pre5.tar.bz2

# GCC
wget ftp://gcc.gnu.org/pub/gcc/releases/gcc-4.6.0/gcc-4.6.0.tar.bz2

# GMP
wget http://ftp.gnu.org/gnu/gmp/gmp-5.0.1.tar.bz2

# iana-etc
wget http://cross-lfs.org/files/packages/embedded-0.0.1/iana-etc-2.30.tar.bz2

# MPC
wget http://www.multiprecision.org/mpc/download/mpc-0.9.tar.gz

# MPFR
wget http://gforge.inria.fr/frs/download.php/27105/mpfr-3.0.0.tar.bz2

# uClibc
wget http://www.uclibc.org/downloads/uClibc-0.9.31.tar.bz2

# Kernel
git clone git://github.com/raspberrypi/linux.git

# Busybox patch
wget http://patches.cross-lfs.org/embedded-dev/busybox-1.18.4-config-1.patch

# iana-etc patch
wget http://patches.cross-lfs.org/embedded-dev/iana-etc-2.30-update-1.patch

# uClibc patch
wget http://patches.cross-lfs.org/embedded-dev/uClibc-0.9.31-configs-2.patch

cd $CLFS_FW

# Broadcom firmware
git clone git://github.com/raspberrypi/firmware.git

cd $CLFS_TOOLS

# Extra tools
git clone git://github.com/raspberrypi/tools.git

eth0.sh

mkdir ${CLFS}/etc/network.d &&
cat > ${CLFS}/etc/network.d/interface.eth0 << "EOF"
# Network Interface Configuration

# network device name
INTERFACE=eth0

# set to yes to use DHCP instead of the settings below
DHCP=no

# IP address
IPADDRESS=192.168.1.2

# netmask
NETMASK=255.255.255.0

# broadcast address
BROADCAST=192.168.1.255
EOF

fstab.sh

sudo sh -c 'cat > /mnt/clfs/etc/fstab << "EOF"
# Begin /etc/fstab

# file system  mount-point  type   options          dump  fsck
#                                                         order

/dev/mmcblk0p1 /boot        vfat   defaults         1     2
/dev/mmcblk0p2 /            ext4   defaults         0     1
/dev/mmcblk0p3 none         swap   sw               0     0
proc           /proc        proc   defaults         0     0
sysfs          /sys         sysfs  defaults         0     0
devpts         /dev/pts     devpts gid=4,mode=620   0     0
shm            /dev/shm     tmpfs  defaults         0     0
# End /etc/fstab
EOF'

hosts.sh

cat > ${CLFS}/etc/hosts << "EOF"
# Begin /etc/hosts (no network card version)

127.0.0.1 my-awesome-raspberry localhost

# End /etc/hosts (no network card version)
EOF

inittab.sh

cat > ${CLFS}/etc/inittab<< "EOF"
# /etc/inittab

::sysinit:/etc/rc.d/startup

tty1::respawn:/sbin/getty 38400 tty1
tty2::respawn:/sbin/getty 38400 tty2
tty3::respawn:/sbin/getty 38400 tty3
tty4::respawn:/sbin/getty 38400 tty4
tty5::respawn:/sbin/getty 38400 tty5
tty6::respawn:/sbin/getty 38400 tty6

# Put a getty on the serial line (for a terminal)
# uncomment this line if your using a serial console
#::respawn:/sbin/getty -L ttyS0 115200 vt100

::shutdown:/etc/rc.d/shutdown
::ctrlaltdel:/sbin/reboot
EOF

mdev.sh

cat > ${CLFS}/etc/mdev.conf<< "EOF"
# /etc/mdev/conf

# Devices:
# Syntax: %s %d:%d %s
# devices user:group mode

# null does already exist; therefore ownership has to be changed with command
null    root:root 0666  @chmod 666 $MDEV
zero    root:root 0666
grsec   root:root 0660
full    root:root 0666

random  root:root 0666
urandom root:root 0444
hwrandom root:root 0660

# console does already exist; therefore ownership has to be changed with command
#console        root:tty 0600   @chmod 600 $MDEV && mkdir -p vc && ln -sf ../$MDEV vc/0
console root:tty 0600 @mkdir -pm 755 fd && cd fd && for x in 0 1 2 3 ; do ln -sf /proc/self/fd/$x $x; done

fd0     root:floppy 0660
kmem    root:root 0640
mem     root:root 0640
port    root:root 0640
ptmx    root:tty 0666

# ram.*
ram([0-9]*)     root:disk 0660 >rd/%1
loop([0-9]+)    root:disk 0660 >loop/%1
sd[a-z].*       root:disk 0660 */lib/mdev/usbdisk_link
hd[a-z][0-9]*   root:disk 0660 */lib/mdev/ide_links
md[0-9]         root:disk 0660

tty             root:tty 0666
tty[0-9]        root:root 0600
tty[0-9][0-9]   root:tty 0660
ttyS[0-9]*      root:tty 0660
pty.*           root:tty 0660
vcs[0-9]*       root:tty 0660
vcsa[0-9]*      root:tty 0660

ttyLTM[0-9]     root:dialout 0660 @ln -sf $MDEV modem
ttySHSF[0-9]    root:dialout 0660 @ln -sf $MDEV modem
slamr           root:dialout 0660 @ln -sf $MDEV slamr0
slusb           root:dialout 0660 @ln -sf $MDEV slusb0
fuse            root:root  0666

# dri device
card[0-9]       root:video 0660 =dri/

# alsa sound devices and audio stuff
pcm.*           root:audio 0660 =snd/
control.*       root:audio 0660 =snd/
midi.*          root:audio 0660 =snd/
seq             root:audio 0660 =snd/
timer           root:audio 0660 =snd/

adsp            root:audio 0660 >sound/
audio           root:audio 0660 >sound/
dsp             root:audio 0660 >sound/
mixer           root:audio 0660 >sound/
sequencer.*     root:audio 0660 >sound/

# misc stuff
agpgart         root:root 0660  >misc/
psaux           root:root 0660  >misc/
rtc             root:root 0664  >misc/

# input stuff
event[0-9]+     root:root 0640 =input/
mice            root:root 0640 =input/
mouse[0-9]      root:root 0640 =input/
ts[0-9]         root:root 0600 =input/

# v4l stuff
vbi[0-9]        root:video 0660 >v4l/
video[0-9]      root:video 0660 >v4l/

# dvb stuff
dvb.*           root:video 0660 */lib/mdev/dvbdev

# load drivers for usb devices
usbdev[0-9].[0-9]       root:root 0660 */lib/mdev/usbdev
usbdev[0-9].[0-9]_.*    root:root 0660

# net devices
tun[0-9]*       root:root 0600 =net/
tap[0-9]*       root:root 0600 =net/

# zaptel devices
zap(.*)         root:dialout 0660 =zap/%1
dahdi!(.*)      root:dialout 0660 =dahdi/%1

# raid controllers
cciss!(.*)      root:disk 0660 =cciss/%1
ida!(.*)        root:disk 0660 =ida/%1
rd!(.*)         root:disk 0660 =rd/%1

sr[0-9]         root:cdrom 0660 @ln -sf $MDEV cdrom 

# hpilo
hpilo!(.*)      root:root 0660 =hpilo/%1

# xen stuff
xvd[a-z]        root:root 0660 */lib/mdev/xvd_links
EOF

network.sh

cat > ${CLFS}/etc/network.conf << "EOF"
# /etc/network.conf
# Global Networking Configuration
# interface configuration is in /etc/network.d/

# set to yes to enable networking
NETWORKING=yes

# set to yes to set default route to gateway
USE_GATEWAY=no

# set to gateway IP address
GATEWAY=192.168.0.1

# Interfaces to add to br0 bridge
# Leave commented to not setup a network bridge
# Substitute br0 for eth0 in the interface.eth0 sample below to bring up br0
# instead
# bcm47xx with vlans:
#BRIDGE_INTERFACES="eth0.0 eth0.1 wlan0"
# Other access point with a wired eth0 and a wireless wlan0 interface:
#BRIDGE_INTERFACES="eth0 wlan0"

EOF

profile.sh

cat > ${CLFS}/etc/profile<< "EOF"
# /etc/profile

# Set the initial path
export PATH=/bin:/usr/bin

if [ `id -u` -eq 0 ] ; then
        PATH=/bin:/sbin:/usr/bin:/usr/sbin
        unset HISTFILE
fi

# Setup some environment variables.
export USER=`id -un`
export LOGNAME=$USER
export HOSTNAME=`/bin/hostname`
export HISTSIZE=1000
export HISTFILESIZE=1000
export PAGER='/bin/more '
export EDITOR='/bin/vi'

# End /etc/profile
EOF

resolve.sh

cat > ${CLFS}/etc/resolv.conf << "EOF"
# Begin /etc/resolv.conf

domain [Your Domain Name]
nameserver [IP address of your primary nameserver]
nameserver [IP address of your secondary nameserver]

# End /etc/resolv.conf
EOF

setup_logs.sh

touch ${CLFS}/var/run/utmp ${CLFS}/var/log/{btmp,lastlog,wtmp}
chmod -v 664 ${CLFS}/var/run/utmp ${CLFS}/var/log/lastlog

binutils not compiled error

Please. What would be the following order?

• create_fhs.sh
• cross_compiler.sh
• ...

Try this order,

add_user.sh
add_groups.sh
create_build_env.sh
add_cross_compiler_to_env.sh
create_fhs.sh
download_sw.sh

build_cross_compiler.sh

build_kernel.sh
build_iana_etc.sh

I am half way through building the image.

I recommend you create a separate partition and mount it for clfs.