-
-
Save ffainelli/4e7e5e09ebfb3994505c917a8c0892d6 to your computer and use it in GitHub Desktop.
Raspberry Pi 4B boot log with debug
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] | |
[ 0.000000] Linux version 6.2.0-10218-g0efd488e2948-dirty (florian@silverado) (aarch64-buildroot-linux-musl-gcc.br_real (Buildroot 2022.08-rc2-21-g4c | |
bf7336914f) 11.3.0, GNU ld (GNU Binutils) 2.38) #75 SMP Sun Feb 26 10:50:09 PST 2023 | |
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1 | |
[ 0.000000] earlycon: bcm2835aux0 at MMIO32 0x00000000fe215040 (options '115200n8') | |
[ 0.000000] printk: bootconsole [bcm2835aux0] enabled | |
[ 0.000000] efi: UEFI not found. | |
[ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader! | |
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB | |
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
[ 0.000000] Zone ranges: | |
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] | |
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff] | |
[ 0.000000] Normal empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] | |
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] | |
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges | |
[ 0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges | |
[ 0.000000] kasan: KernelAddressSanitizer initialized (generic) | |
[ 0.000000] percpu: Embedded 29 pages/cpu s78056 r8192 d32536 u118784 | |
[ 0.000000] Detected PIPT I-cache on CPU0 | |
[ 0.000000] CPU features: detected: Spectre-v2 | |
[ 0.000000] CPU features: detected: Spectre-v4 | |
[ 0.000000] CPU features: detected: Spectre-BHB | |
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
[ 0.000000] alternatives: applying boot alternatives | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912 | |
[ 0.000000] Kernel command line: dma.dmachans=0x71f5 bcm2709.boardrev=0xc03111 bcm2709.serial=0x4b11cb83 bcm2709.uart_clock=48000000 bcm2709.disk_le | |
d_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:1C:A0:82 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 earlycon earlyprintk | |
[ 0.000000] Unknown kernel command line parameters "earlyprintk", will be passed to user space. | |
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] stackdepot: allocating hash table via alloc_large_system_hash | |
[ 0.000000] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
[ 0.000000] software IO TLB: area num 4. | |
[ 0.000000] software IO TLB: mapped [mem 0x0000000033400000-0x0000000037400000] (64MB) | |
[ 0.000000] Memory: 3157404K/4050944K available (15360K kernel code, 6872K rwdata, 7324K rodata, 116864K init, 807K bss, 828004K reserved, 65536K cma | |
-reserved) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] ftrace: allocating 43215 entries in 169 pages | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site bcm2836_arm_irqchip_handle_irq+0x0/0x88 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: ffffffc00809000c x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000000 x24: ffffffc009777be0 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc008090054 x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 383878302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 7172695f6d72615f x9 : dfffffc000000000 | |
[ 0.000000] x8 : 636220657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site gic_handle_irq+0x0/0xbc | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: 0000000000000000 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000000 x24: ffffffc009777be8 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc0080900dc x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 636278302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 657469732d686374 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 696720657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site __traceiter_initcall_start+0x0/0x84 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: ffffffc00809438c x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000030 x24: ffffffc009777c08 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc008094404 x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 343878302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 7265746965636172 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 5f5f20657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site trace_initcall_start_cb+0x0/0x70 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: ffffffc008094494 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000040 x24: ffffffc009777c18 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc008094544 x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 303778302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 6e695f6563617274 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 727420657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site run_init_process+0x0/0x11c | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: 0000000000000000 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000040 x24: ffffffc009777c20 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc0080945dc x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 63313178302f3078 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 757220657469732d x9 : dfffffc000000000 | |
[ 0.000000] x8 : 757220657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site initcall_blacklisted+0x0/0x170 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: ffffffc008094704 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000050 x24: ffffffc009777c30 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc00809508c x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 30373178302f3078 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 616374696e692065 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 6e6920657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site trace_initcall_finish_cb+0x0/0x74 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: 0000000000000000 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000050 x24: ffffffc009777c38 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc0080952d4 x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 343778302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 696e695f65636172 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 727420657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site do_one_initcall+0x0/0x2a0 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: 0000000000000000 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000050 x24: ffffffc009777c40 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc0080954ac x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 30613278302f3078 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 6420657469732d68 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 6f6420657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site match_dev_by_label+0x0/0x64 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: ffffffc008095704 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000060 x24: ffffffc009777c50 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc00809574c x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 343678302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 74616d2065746973 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 616d20657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site wait_for_initramfs+0x0/0x6c | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: ffffffc00809590c x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000090 x24: ffffffc009777c70 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc008095d7c x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 633678302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 6961772065746973 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 617720657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:6856 ftrace_process_locs+0x2ec/0x4a8 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_process_locs+0x2ec/0x4a8 | |
[ 0.000000] lr : ftrace_process_locs+0x2e4/0x4a8 | |
[ 0.000000] sp : ffffffc0108e7dc0 | |
[ 0.000000] x29: ffffffc0108e7dc0 x28: 0000000000000000 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000055010 x24: ffffffc0097cc248 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: ffffff804000e000 | |
[ 0.000000] x20: ffffffc010ffa1c0 x19: ffffff804000e000 x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 633678302f307830 x12: 1ffffff802121388 | |
[ 0.000000] x11: ffffffb802121388 x10: 6961772065746973 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 617720657469732d x7 : ffffffc010909c40 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : ffffffc0081eb6e0 | |
[ 0.000000] x2 : 0000000000000007 x1 : 0000000000000000 x0 : ffffff804000e100 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_process_locs+0x2ec/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ftrace: allocated 169 pages with 4 groups | |
[ 0.000000] trace event string verifier disabled | |
[ 0.000000] rcu: Hierarchical RCU implementation. | |
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. | |
[ 0.000000] Rude variant of Tasks RCU enabled. | |
[ 0.000000] Tracing variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
[ 0.000000] Root IRQ handler: gic_handle_irq | |
[ 0.000000] GIC: Using split EOI/Deactivate mode | |
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns | |
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns | |
[ 0.008542] Console: colour dummy device 80x25 | |
[ 0.013056] printk: console [tty0] enabled | |
[ 0.017220] printk: bootconsole [bcm2835aux0] disabled | |
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] | |
[ 0.000000] Linux version 6.2.0-10218-g0efd488e2948-dirty (florian@silverado) (aarch64-buildroot-linux-musl-gcc.br_real (Buildroot 2022.08-rc2-21-g4c | |
bf7336914f) 11.3.0, GNU ld (GNU Binutils) 2.38) #75 SMP Sun Feb 26 10:50:09 PST 2023 | |
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1 | |
[ 0.000000] earlycon: bcm2835aux0 at MMIO32 0x00000000fe215040 (options '115200n8') | |
[ 0.000000] printk: bootconsole [bcm2835aux0] enabled | |
[ 0.000000] efi: UEFI not found. | |
[ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader! | |
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB | |
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
[ 0.000000] Zone ranges: | |
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] | |
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff] | |
[ 0.000000] Normal empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] | |
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] | |
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges | |
[ 0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges | |
[ 0.000000] kasan: KernelAddressSanitizer initialized (generic) | |
[ 0.000000] percpu: Embedded 29 pages/cpu s78056 r8192 d32536 u118784 | |
[ 0.000000] Detected PIPT I-cache on CPU0 | |
[ 0.000000] CPU features: detected: Spectre-v2 | |
[ 0.000000] CPU features: detected: Spectre-v4 | |
[ 0.000000] CPU features: detected: Spectre-BHB | |
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
[ 0.000000] alternatives: applying boot alternatives | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912 | |
[ 0.000000] Kernel command line: dma.dmachans=0x71f5 bcm2709.boardrev=0xc03111 bcm2709.serial=0x4b11cb83 bcm2709.uart_clock=48000000 bcm2709.disk_le | |
d_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:1C:A0:82 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 earlycon earlyprintk | |
[ 0.000000] Unknown kernel command line parameters "earlyprintk", will be passed to user space. | |
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] stackdepot: allocating hash table via alloc_large_system_hash | |
[ 0.000000] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
[ 0.000000] software IO TLB: area num 4. | |
[ 0.000000] software IO TLB: mapped [mem 0x0000000033400000-0x0000000037400000] (64MB) | |
[ 0.000000] Memory: 3157404K/4050944K available (15360K kernel code, 6872K rwdata, 7324K rodata, 116864K init, 807K bss, 828004K reserved, 65536K cma | |
-reserved) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] ftrace: allocating 43215 entries in 169 pages | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site bcm2836_arm_irqchip_handle_irq+0x0/0x88 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: ffffffc00809000c x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000000 x24: ffffffc009777be0 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc008090054 x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 383878302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 7172695f6d72615f x9 : dfffffc000000000 | |
[ 0.000000] x8 : 636220657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site gic_handle_irq+0x0/0xbc | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: 0000000000000000 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000000 x24: ffffffc009777be8 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc0080900dc x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 636278302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 657469732d686374 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 696720657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site __traceiter_initcall_start+0x0/0x84 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: ffffffc00809438c x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000030 x24: ffffffc009777c08 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc008094404 x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 343878302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 7265746965636172 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 5f5f20657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site trace_initcall_start_cb+0x0/0x70 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: ffffffc008094494 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000040 x24: ffffffc009777c18 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc008094544 x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 303778302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 6e695f6563617274 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 727420657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site run_init_process+0x0/0x11c | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: 0000000000000000 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000040 x24: ffffffc009777c20 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc0080945dc x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 63313178302f3078 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 757220657469732d x9 : dfffffc000000000 | |
[ 0.000000] x8 : 757220657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site initcall_blacklisted+0x0/0x170 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: ffffffc008094704 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000050 x24: ffffffc009777c30 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc00809508c x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 30373178302f3078 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 616374696e692065 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 6e6920657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site trace_initcall_finish_cb+0x0/0x74 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: 0000000000000000 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000050 x24: ffffffc009777c38 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc0080952d4 x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 343778302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 696e695f65636172 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 727420657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site do_one_initcall+0x0/0x2a0 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: 0000000000000000 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000050 x24: ffffffc009777c40 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc0080954ac x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 30613278302f3078 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 6420657469732d68 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 6f6420657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site match_dev_by_label+0x0/0x64 | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: ffffffc008095704 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000060 x24: ffffffc009777c50 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc00809574c x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 343678302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 74616d2065746973 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 616d20657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] Misaligned patch-site wait_for_initramfs+0x0/0x6c | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] sp : ffffffc0108e7d90 | |
[ 0.000000] x29: ffffffc0108e7d90 x28: ffffffc00809590c x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000090 x24: ffffffc009777c70 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: 0000000000000000 | |
[ 0.000000] x20: ffffffc008fa5360 x19: ffffffc008095d7c x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 633678302f307830 x12: 1ffffff80211cf38 | |
[ 0.000000] x11: ffffffb80211cf38 x10: 6961772065746973 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 617720657469732d x7 : ffffffc0108e79c7 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000 | |
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc0108f77c0 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_call_adjust+0x4c/0x70 | |
[ 0.000000] ftrace_process_locs+0x294/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ------------[ cut here ]------------ | |
[ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:6856 ftrace_process_locs+0x2ec/0x4a8 | |
[ 0.000000] Modules linked in: | |
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 0.000000] pc : ftrace_process_locs+0x2ec/0x4a8 | |
[ 0.000000] lr : ftrace_process_locs+0x2e4/0x4a8 | |
[ 0.000000] sp : ffffffc0108e7dc0 | |
[ 0.000000] x29: ffffffc0108e7dc0 x28: 0000000000000000 x27: 0000000000001000 | |
[ 0.000000] x26: ffffff8040080000 x25: 0000000000055010 x24: ffffffc0097cc248 | |
[ 0.000000] x23: ffffffc010a5c760 x22: 0000000000000000 x21: ffffff804000e000 | |
[ 0.000000] x20: ffffffc010ffa1c0 x19: ffffff804000e000 x18: 000000008043d8b7 | |
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | |
[ 0.000000] x14: 0000000000000000 x13: 633678302f307830 x12: 1ffffff802121388 | |
[ 0.000000] x11: ffffffb802121388 x10: 6961772065746973 x9 : dfffffc000000000 | |
[ 0.000000] x8 : 617720657469732d x7 : ffffffc010909c40 x6 : 0000000000000000 | |
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : ffffffc0081eb6e0 | |
[ 0.000000] x2 : 0000000000000007 x1 : 0000000000000000 x0 : ffffff804000e100 | |
[ 0.000000] Call trace: | |
[ 0.000000] ftrace_process_locs+0x2ec/0x4a8 | |
[ 0.000000] ftrace_init+0x84/0x140 | |
[ 0.000000] start_kernel+0x170/0x398 | |
[ 0.000000] __primary_switched+0xb8/0xc8 | |
[ 0.000000] ---[ end trace 0000000000000000 ]--- | |
[ 0.000000] ftrace: allocated 169 pages with 4 groups | |
[ 0.000000] trace event string verifier disabled | |
[ 0.000000] rcu: Hierarchical RCU implementation. | |
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. | |
[ 0.000000] Rude variant of Tasks RCU enabled. | |
[ 0.000000] Tracing variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
[ 0.000000] Root IRQ handler: gic_handle_irq | |
[ 0.000000] GIC: Using split EOI/Deactivate mode | |
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns | |
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns | |
[ 0.008542] Console: colour dummy device 80x25 | |
[ 0.013056] printk: console [tty0] enabled | |
[ 0.017220] printk: bootconsole [bcm2835aux0] disabled | |
[ 0.022488] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) | |
[ 0.022526] pid_max: default: 32768 minimum: 301 | |
[ 0.023023] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
[ 0.023090] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
[ 0.026386] cblist_init_generic: Setting adjustable number of callback queues. | |
[ 0.026480] cblist_init_generic: Setting shift to 2 and lim to 1. | |
[ 0.026679] cblist_init_generic: Setting shift to 2 and lim to 1. | |
[ 0.027096] rcu: Hierarchical SRCU implementation. | |
[ 0.027119] rcu: Max phase no-delay instances is 1000. | |
[ 0.029599] EFI services will not be available. | |
[ 0.030268] smp: Bringing up secondary CPUs ... | |
[ 0.031353] Detected PIPT I-cache on CPU1 | |
[ 0.031480] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] | |
[ 0.032597] Detected PIPT I-cache on CPU2 | |
[ 0.032694] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] | |
[ 0.033781] Detected PIPT I-cache on CPU3 | |
[ 0.033878] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] | |
[ 0.033990] smp: Brought up 1 node, 4 CPUs | |
[ 0.034089] SMP: Total of 4 processors activated. | |
[ 0.034113] CPU features: detected: 32-bit EL0 Support | |
[ 0.034134] CPU features: detected: CRC32 instructions | |
[ 0.034237] CPU: All CPU(s) started at EL2 | |
[ 0.034259] alternatives: applying system-wide alternatives | |
[ 0.036094] devtmpfs: initialized | |
[ 0.054530] device: 'platform': device_add | |
[ 0.054839] device: 'cpu': device_add | |
[ 0.055128] device: 'container': device_add | |
[ 0.061310] device: 'workqueue': device_add | |
[ 0.061537] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ 0.061590] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
[ 0.067685] pinctrl core: initialized pinctrl subsystem | |
[ 0.068199] device: 'reg-dummy': device_add | |
[ 0.068499] device: 'regulator.0': device_add | |
[ 0.069158] DMI not present or invalid. | |
[ 0.070078] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
[ 0.073382] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations | |
[ 0.074027] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
[ 0.074450] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
[ 0.075139] device: 'vtcon0': device_add | |
[ 0.075829] thermal_sys: Registered thermal governor 'step_wise' | |
[ 0.076574] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
[ 0.076764] ASID allocator initialised with 65536 entries | |
[ 0.076996] Serial: AMBA PL011 UART driver | |
[ 0.077825] device: '0.framebuffer': device_add | |
[ 0.078104] device: 'chosen': device_add | |
[ 0.078338] device: 'soc': device_add | |
[ 0.078546] timer@7e003000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.078660] txp@7e004000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.078721] cprman@7e101000 Linked as a fwnode consumer to clk-osc | |
[ 0.078831] mailbox@7e00b880 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.078909] gpio@7e200000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.080566] serial@7e201000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.080613] serial@7e201000 Linked as a fwnode consumer to cprman@7e101000 | |
[ 0.080670] serial@7e201000 Linked as a fwnode consumer to uart0-ctsrts-gpio30 | |
[ 0.080708] serial@7e201000 Linked as a fwnode consumer to uart0-gpio32 | |
[ 0.080762] bluetooth Linked as a fwnode consumer to gpio | |
[ 0.080822] i2c@7e205000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.080867] i2c@7e205000 Linked as a fwnode consumer to cprman@7e101000 | |
[ 0.080917] i2c@7e205000 Linked as a fwnode consumer to i2c0-gpio0 | |
[ 0.080971] aux@7e215000 Linked as a fwnode consumer to cprman@7e101000 | |
[ 0.081034] serial@7e215040 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.081083] serial@7e215040 Linked as a fwnode consumer to aux@7e215000 | |
[ 0.081127] serial@7e215040 Linked as a fwnode consumer to uart1-gpio14 | |
[ 0.081189] mmc@7e300000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.081233] mmc@7e300000 Linked as a fwnode consumer to cprman@7e101000 | |
[ 0.081283] mmc@7e300000 Linked as a fwnode consumer to emmc-gpio34 | |
[ 0.081360] hvs@7e400000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.081404] hvs@7e400000 Linked as a fwnode consumer to clocks | |
[ 0.081463] i2c@7e804000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.081507] i2c@7e804000 Linked as a fwnode consumer to cprman@7e101000 | |
[ 0.081557] i2c@7e804000 Linked as a fwnode consumer to i2c1-gpio2 | |
[ 0.081619] usb@7e980000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.081672] usb@7e980000 Linked as a fwnode consumer to clk-usb | |
[ 0.081710] usb@7e980000 Linked as a fwnode consumer to phy | |
[ 0.081747] usb@7e980000 Linked as a fwnode consumer to power | |
[ 0.081837] interrupt-controller@40041000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.081938] dma@7e007000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.082153] watchdog@7e100000 Linked as a fwnode consumer to cprman@7e101000 | |
[ 0.082259] pixelvalve@7e206000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.082331] pixelvalve@7e207000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.082403] pixelvalve@7e20a000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.082463] pwm@7e20c800 Linked as a fwnode consumer to cprman@7e101000 | |
[ 0.082518] pwm@7e20c800 Linked as a fwnode consumer to pwm1-0-gpio40 | |
[ 0.082550] pwm@7e20c800 Linked as a fwnode consumer to pwm1-1-gpio41 | |
[ 0.082609] pixelvalve@7e216000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.082671] clock@7ef00000 Linked as a fwnode consumer to clk-108M | |
[ 0.082740] interrupt-controller@7ef00100 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.082819] hdmi@7ef00700 Linked as a fwnode consumer to clock@7ef00000 | |
[ 0.082854] hdmi@7ef00700 Linked as a fwnode consumer to interrupt-controller@7ef00100 | |
[ 0.082980] hdmi@7ef00700 Linked as a fwnode consumer to clocks | |
[ 0.083047] hdmi@7ef00700 Linked as a fwnode consumer to clk-27M | |
[ 0.083138] hdmi@7ef05700 Linked as a fwnode consumer to clock@7ef00000 | |
[ 0.083173] hdmi@7ef05700 Linked as a fwnode consumer to interrupt-controller@7ef00100 | |
[ 0.083301] hdmi@7ef05700 Linked as a fwnode consumer to clocks | |
[ 0.083346] hdmi@7ef05700 Linked as a fwnode consumer to clk-27M | |
[ 0.083427] firmware Linked as a fwnode consumer to mailbox@7e00b880 | |
[ 0.083564] mailbox@7e00b840 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.083613] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.083657] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.083698] platform soc: Not linking /clocks/clk-osc - might never become dev | |
[ 0.083735] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.083776] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.083978] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084024] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084070] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084114] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084156] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084198] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084240] platform soc: Not linking /clocks/clk-usb - might never become dev | |
[ 0.084275] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084316] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084358] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084408] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084448] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084488] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084533] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084574] platform soc: Not linking /clk-108M - might never become dev | |
[ 0.084605] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084645] platform soc: Not linking /clk-27M - might never become dev | |
[ 0.084682] platform soc: Not linking /clk-27M - might never become dev | |
[ 0.084725] platform soc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.084847] device: 'fe003000.timer': device_add | |
[ 0.085026] platform fe003000.timer: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.085068] timer@7e003000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.085180] device: 'fe004000.txp': device_add | |
[ 0.085350] platform fe004000.txp: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.085391] txp@7e004000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.085502] device: 'fe101000.cprman': device_add | |
[ 0.085675] platform fe101000.cprman: Not linking /clocks/clk-osc - might never become dev | |
[ 0.085713] cprman@7e101000 Dropping the fwnode link to clk-osc | |
[ 0.085819] device: 'fe00b880.mailbox': device_add | |
[ 0.085985] platform fe00b880.mailbox: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.086026] mailbox@7e00b880 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.086138] device: 'fe200000.gpio': device_add | |
[ 0.086458] platform fe200000.gpio: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.086499] gpio@7e200000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.086751] device: 'fe201000.serial': device_add | |
[ 0.086976] device: 'platform:fe101000.cprman--amba:fe201000.serial': device_add | |
[ 0.087184] devices_kset: Moving fe201000.serial to end of list | |
[ 0.087212] amba fe201000.serial: Linked as a consumer to fe101000.cprman | |
[ 0.087239] serial@7e201000 Dropping the fwnode link to cprman@7e101000 | |
[ 0.087272] amba fe201000.serial: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.087311] serial@7e201000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.087372] amba fe201000.serial: error -EPROBE_DEFER: wait for supplier uart0-gpio32 | |
[ 0.087495] device: 'fe205000.i2c': device_add | |
[ 0.087687] device: 'platform:fe101000.cprman--platform:fe205000.i2c': device_add | |
[ 0.087860] devices_kset: Moving fe205000.i2c to end of list | |
[ 0.087886] platform fe205000.i2c: Linked as a consumer to fe101000.cprman | |
[ 0.087912] i2c@7e205000 Dropping the fwnode link to cprman@7e101000 | |
[ 0.087944] platform fe205000.i2c: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.087983] i2c@7e205000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.088102] device: 'fe215000.aux': device_add | |
[ 0.088288] device: 'platform:fe101000.cprman--platform:fe215000.aux': device_add | |
[ 0.088458] devices_kset: Moving fe215000.aux to end of list | |
[ 0.088484] platform fe215000.aux: Linked as a consumer to fe101000.cprman | |
[ 0.088510] aux@7e215000 Dropping the fwnode link to cprman@7e101000 | |
[ 0.088617] device: 'fe215040.serial': device_add | |
[ 0.088796] device: 'platform:fe215000.aux--platform:fe215040.serial': device_add | |
[ 0.088967] devices_kset: Moving fe215040.serial to end of list | |
[ 0.088993] platform fe215040.serial: Linked as a consumer to fe215000.aux | |
[ 0.089019] serial@7e215040 Dropping the fwnode link to aux@7e215000 | |
[ 0.089051] platform fe215040.serial: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.089090] serial@7e215040 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.089216] device: 'fe300000.mmc': device_add | |
[ 0.089410] device: 'platform:fe101000.cprman--platform:fe300000.mmc': device_add | |
[ 0.089577] devices_kset: Moving fe300000.mmc to end of list | |
[ 0.089602] platform fe300000.mmc: Linked as a consumer to fe101000.cprman | |
[ 0.089628] mmc@7e300000 Dropping the fwnode link to cprman@7e101000 | |
[ 0.089660] platform fe300000.mmc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.089699] mmc@7e300000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.089809] device: 'fe400000.hvs': device_add | |
[ 0.089975] platform fe400000.hvs: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.090016] hvs@7e400000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.090136] device: 'fe804000.i2c': device_add | |
[ 0.090315] device: 'platform:fe101000.cprman--platform:fe804000.i2c': device_add | |
[ 0.090493] devices_kset: Moving fe804000.i2c to end of list | |
[ 0.090519] platform fe804000.i2c: Linked as a consumer to fe101000.cprman | |
[ 0.090544] i2c@7e804000 Dropping the fwnode link to cprman@7e101000 | |
[ 0.090576] platform fe804000.i2c: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.090615] i2c@7e804000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.090728] device: 'fe980000.usb': device_add | |
[ 0.090895] platform fe980000.usb: Not linking /clocks/clk-usb - might never become dev | |
[ 0.090932] usb@7e980000 Dropping the fwnode link to clk-usb | |
[ 0.090962] platform fe980000.usb: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.091001] usb@7e980000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.091137] device: 'ff800000.interrupt-controller': device_add | |
[ 0.091380] device: 'fd5d2000.avs-monitor': device_add | |
[ 0.091634] device: 'fd5d2000.avs-monitor:thermal': device_add | |
[ 0.091898] device: 'fe007000.dma': device_add | |
[ 0.092057] platform fe007000.dma: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.092098] dma@7e007000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.092268] device: 'fe100000.watchdog': device_add | |
[ 0.092452] device: 'platform:fe101000.cprman--platform:fe100000.watchdog': device_add | |
[ 0.092648] devices_kset: Moving fe100000.watchdog to end of list | |
[ 0.092675] platform fe100000.watchdog: Linked as a consumer to fe101000.cprman | |
[ 0.092704] watchdog@7e100000 Dropping the fwnode link to cprman@7e101000 | |
[ 0.092816] device: 'fe104000.rng': device_add | |
[ 0.093096] device: 'fe206000.pixelvalve': device_add | |
[ 0.093267] platform fe206000.pixelvalve: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.093308] pixelvalve@7e206000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.093419] device: 'fe207000.pixelvalve': device_add | |
[ 0.093585] platform fe207000.pixelvalve: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.093626] pixelvalve@7e207000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.093744] device: 'fe20a000.pixelvalve': device_add | |
[ 0.093910] platform fe20a000.pixelvalve: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.093951] pixelvalve@7e20a000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.094064] device: 'fe20c800.pwm': device_add | |
[ 0.094268] device: 'platform:fe101000.cprman--platform:fe20c800.pwm': device_add | |
[ 0.094431] devices_kset: Moving fe20c800.pwm to end of list | |
[ 0.094457] platform fe20c800.pwm: Linked as a consumer to fe101000.cprman | |
[ 0.094483] pwm@7e20c800 Dropping the fwnode link to cprman@7e101000 | |
[ 0.094594] device: 'fe216000.pixelvalve': device_add | |
[ 0.094765] platform fe216000.pixelvalve: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.094806] pixelvalve@7e216000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.094923] device: 'fef00000.clock': device_add | |
[ 0.095128] platform fef00000.clock: Not linking /clk-108M - might never become dev | |
[ 0.095164] clock@7ef00000 Dropping the fwnode link to clk-108M | |
[ 0.095270] device: 'fef00100.interrupt-controller': device_add | |
[ 0.095445] platform fef00100.interrupt-controller: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.095488] interrupt-controller@7ef00100 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.095836] device: 'fef00700.hdmi': device_add | |
[ 0.096003] platform fef00700.hdmi: Not linking /clk-27M - might never become dev | |
[ 0.096038] hdmi@7ef00700 Dropping the fwnode link to clk-27M | |
[ 0.096087] device: 'platform:fef00100.interrupt-controller--platform:fef00700.hdmi': device_add | |
[ 0.096263] devices_kset: Moving fef00700.hdmi to end of list | |
[ 0.096289] platform fef00700.hdmi: Linked as a consumer to fef00100.interrupt-controller | |
[ 0.096319] hdmi@7ef00700 Dropping the fwnode link to interrupt-controller@7ef00100 | |
[ 0.096371] device: 'platform:fef00000.clock--platform:fef00700.hdmi': device_add | |
[ 0.096531] devices_kset: Moving fef00700.hdmi to end of list | |
[ 0.096556] platform fef00700.hdmi: Linked as a consumer to fef00000.clock | |
[ 0.096582] hdmi@7ef00700 Dropping the fwnode link to clock@7ef00000 | |
[ 0.096722] device: 'fef04500.i2c': device_add | |
[ 0.097201] device: 'fef05700.hdmi': device_add | |
[ 0.097366] platform fef05700.hdmi: Not linking /clk-27M - might never become dev | |
[ 0.097401] hdmi@7ef05700 Dropping the fwnode link to clk-27M | |
[ 0.097449] device: 'platform:fef00100.interrupt-controller--platform:fef05700.hdmi': device_add | |
[ 0.097613] devices_kset: Moving fef05700.hdmi to end of list | |
[ 0.097639] platform fef05700.hdmi: Linked as a consumer to fef00100.interrupt-controller | |
[ 0.097669] hdmi@7ef05700 Dropping the fwnode link to interrupt-controller@7ef00100 | |
[ 0.097724] device: 'platform:fef00000.clock--platform:fef05700.hdmi': device_add | |
[ 0.097893] devices_kset: Moving fef05700.hdmi to end of list | |
[ 0.097919] platform fef05700.hdmi: Linked as a consumer to fef00000.clock | |
[ 0.097944] hdmi@7ef05700 Dropping the fwnode link to clock@7ef00000 | |
[ 0.098080] device: 'fef09500.i2c': device_add | |
[ 0.098284] device: 'soc:firmware': device_add | |
[ 0.098476] device: 'platform:fe00b880.mailbox--platform:soc:firmware': device_add | |
[ 0.098643] devices_kset: Moving soc:firmware to end of list | |
[ 0.098669] platform soc:firmware: Linked as a consumer to fe00b880.mailbox | |
[ 0.098695] firmware Dropping the fwnode link to mailbox@7e00b880 | |
[ 0.098792] device: 'soc:firmware:clocks': device_add | |
[ 0.098976] device: 'platform:soc:firmware:clocks--platform:fef05700.hdmi': device_add | |
[ 0.099188] devices_kset: Moving fef05700.hdmi to end of list | |
[ 0.099215] platform fef05700.hdmi: Linked as a consumer to soc:firmware:clocks | |
[ 0.099243] hdmi@7ef05700 Dropping the fwnode link to clocks | |
[ 0.099291] device: 'platform:soc:firmware:clocks--platform:fef00700.hdmi': device_add | |
[ 0.099455] devices_kset: Moving fef00700.hdmi to end of list | |
[ 0.099480] platform fef00700.hdmi: Linked as a consumer to soc:firmware:clocks | |
[ 0.099509] hdmi@7ef00700 Dropping the fwnode link to clocks | |
[ 0.099555] device: 'platform:soc:firmware:clocks--platform:fe400000.hvs': device_add | |
[ 0.099728] devices_kset: Moving fe400000.hvs to end of list | |
[ 0.099754] platform fe400000.hvs: Linked as a consumer to soc:firmware:clocks | |
[ 0.099782] hvs@7e400000 Dropping the fwnode link to clocks | |
[ 0.099861] device: 'soc:firmware:gpio': device_add | |
[ 0.100047] device: 'platform:soc:firmware:gpio--amba:fe201000.serial': device_add | |
[ 0.100232] amba fe201000.serial: Linked as a sync state only consumer to soc:firmware:gpio | |
[ 0.100324] device: 'soc:firmware:reset': device_add | |
[ 0.100538] device: 'soc:power': device_add | |
[ 0.100721] device: 'platform:soc:power--platform:fe980000.usb': device_add | |
[ 0.100895] devices_kset: Moving fe980000.usb to end of list | |
[ 0.100921] platform fe980000.usb: Linked as a consumer to soc:power | |
[ 0.100947] usb@7e980000 Dropping the fwnode link to power | |
[ 0.101053] device: 'fe00b840.mailbox': device_add | |
[ 0.101224] platform fe00b840.mailbox: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.101265] mailbox@7e00b840 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.101332] device: 'phy': device_add | |
[ 0.101525] device: 'platform:phy--platform:fe980000.usb': device_add | |
[ 0.101701] devices_kset: Moving fe980000.usb to end of list | |
[ 0.101727] platform fe980000.usb: Linked as a consumer to phy | |
[ 0.101751] usb@7e980000 Dropping the fwnode link to phy | |
[ 0.101809] device: 'gpu': device_add | |
[ 0.102013] device: 'emmc2bus': device_add | |
[ 0.102223] mmc@7e340000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.102270] mmc@7e340000 Linked as a fwnode consumer to cprman@7e101000 | |
[ 0.102312] mmc@7e340000 Linked as a fwnode consumer to regulator-sd-io-1v8 | |
[ 0.102350] mmc@7e340000 Linked as a fwnode consumer to regulator-sd-vcc | |
[ 0.102409] device: 'platform:fe101000.cprman--platform:emmc2bus': device_add | |
[ 0.102585] platform emmc2bus: Linked as a sync state only consumer to fe101000.cprman | |
[ 0.102618] platform emmc2bus: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.102739] device: 'fe340000.mmc': device_add | |
[ 0.102934] device: 'platform:fe101000.cprman--platform:fe340000.mmc': device_add | |
[ 0.103131] devices_kset: Moving fe340000.mmc to end of list | |
[ 0.103158] platform fe340000.mmc: Linked as a consumer to fe101000.cprman | |
[ 0.103184] mmc@7e340000 Dropping the fwnode link to cprman@7e101000 | |
[ 0.103216] platform fe340000.mmc: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.103255] mmc@7e340000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.103323] device: 'arm-pmu': device_add | |
[ 0.103510] arm-pmu Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.103596] platform arm-pmu: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.103635] arm-pmu Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.103699] device: 'timer': device_add | |
[ 0.103876] timer Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.103959] platform timer: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.103997] timer Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.104060] device: 'scb': device_add | |
[ 0.104270] pcie@7d500000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.104400] usb@0,0 Linked as a fwnode consumer to reset | |
[ 0.104471] ethernet@7d580000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.104587] gpu@7ec00000 Linked as a fwnode consumer to watchdog@7e100000 | |
[ 0.104642] gpu@7ec00000 Linked as a fwnode consumer to interrupt-controller@40041000 | |
[ 0.104685] gpu@7ec00000 Linked as a fwnode consumer to clocks | |
[ 0.104721] platform scb: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.104781] device: 'platform:soc:firmware:reset--platform:scb': device_add | |
[ 0.104961] platform scb: Linked as a sync state only consumer to soc:firmware:reset | |
[ 0.104997] platform scb: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.105058] device: 'platform:soc:firmware:clocks--platform:scb': device_add | |
[ 0.105233] platform scb: Linked as a sync state only consumer to soc:firmware:clocks | |
[ 0.105266] platform scb: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.105322] device: 'platform:fe100000.watchdog--platform:scb': device_add | |
[ 0.105485] platform scb: Linked as a sync state only consumer to fe100000.watchdog | |
[ 0.105601] device: 'fd500000.pcie': device_add | |
[ 0.105773] platform fd500000.pcie: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.105814] pcie@7d500000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.105868] device: 'platform:soc:firmware:reset--platform:fd500000.pcie': device_add | |
[ 0.106047] platform fd500000.pcie: Linked as a sync state only consumer to soc:firmware:reset | |
[ 0.106159] device: 'fd580000.ethernet': device_add | |
[ 0.106335] platform fd580000.ethernet: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.106376] ethernet@7d580000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.106517] device: 'fec00000.gpu': device_add | |
[ 0.106701] device: 'platform:soc:firmware:clocks--platform:fec00000.gpu': device_add | |
[ 0.106871] devices_kset: Moving fec00000.gpu to end of list | |
[ 0.106897] platform fec00000.gpu: Linked as a consumer to soc:firmware:clocks | |
[ 0.106925] gpu@7ec00000 Dropping the fwnode link to clocks | |
[ 0.106956] platform fec00000.gpu: Not linking /soc/interrupt-controller@40041000 - might never become dev | |
[ 0.106995] gpu@7ec00000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.107046] device: 'platform:fe100000.watchdog--platform:fec00000.gpu': device_add | |
[ 0.107236] devices_kset: Moving fec00000.gpu to end of list | |
[ 0.107262] platform fec00000.gpu: Linked as a consumer to fe100000.watchdog | |
[ 0.107289] gpu@7ec00000 Dropping the fwnode link to watchdog@7e100000 | |
[ 0.107350] device: 'leds': device_add | |
[ 0.107555] led-act Linked as a fwnode consumer to gpio@7e200000 | |
[ 0.107601] led-pwr Linked as a fwnode consumer to gpio | |
[ 0.107658] device: 'platform:fe200000.gpio--platform:leds': device_add | |
[ 0.107823] platform leds: Linked as a sync state only consumer to fe200000.gpio | |
[ 0.107874] device: 'platform:soc:firmware:gpio--platform:leds': device_add | |
[ 0.108059] platform leds: Linked as a sync state only consumer to soc:firmware:gpio | |
[ 0.108134] device: 'wifi-pwrseq': device_add | |
[ 0.108305] wifi-pwrseq Linked as a fwnode consumer to gpio | |
[ 0.108362] device: 'platform:soc:firmware:gpio--platform:wifi-pwrseq': device_add | |
[ 0.108540] devices_kset: Moving wifi-pwrseq to end of list | |
[ 0.108566] platform wifi-pwrseq: Linked as a consumer to soc:firmware:gpio | |
[ 0.108592] wifi-pwrseq Dropping the fwnode link to gpio | |
[ 0.108655] device: 'regulator-sd-io-1v8': device_add | |
[ 0.108849] regulator-sd-io-1v8 Linked as a fwnode consumer to gpio | |
[ 0.108914] device: 'platform:regulator-sd-io-1v8--platform:fe340000.mmc': device_add | |
[ 0.109085] devices_kset: Moving fe340000.mmc to end of list | |
[ 0.109111] platform fe340000.mmc: Linked as a consumer to regulator-sd-io-1v8 | |
[ 0.109139] mmc@7e340000 Dropping the fwnode link to regulator-sd-io-1v8 | |
[ 0.109188] device: 'platform:soc:firmware:gpio--platform:regulator-sd-io-1v8': device_add | |
[ 0.109359] devices_kset: Moving regulator-sd-io-1v8 to end of list | |
[ 0.109384] devices_kset: Moving fe340000.mmc to end of list | |
[ 0.109407] platform regulator-sd-io-1v8: Linked as a consumer to soc:firmware:gpio | |
[ 0.109437] regulator-sd-io-1v8 Dropping the fwnode link to gpio | |
[ 0.109499] device: 'regulator-sd-vcc': device_add | |
[ 0.109696] regulator-sd-vcc Linked as a fwnode consumer to gpio | |
[ 0.109754] device: 'platform:regulator-sd-vcc--platform:fe340000.mmc': device_add | |
[ 0.109921] devices_kset: Moving fe340000.mmc to end of list | |
[ 0.109948] platform fe340000.mmc: Linked as a consumer to regulator-sd-vcc | |
[ 0.109974] mmc@7e340000 Dropping the fwnode link to regulator-sd-vcc | |
[ 0.110022] device: 'platform:soc:firmware:gpio--platform:regulator-sd-vcc': device_add | |
[ 0.110189] devices_kset: Moving regulator-sd-vcc to end of list | |
[ 0.110213] devices_kset: Moving fe340000.mmc to end of list | |
[ 0.110236] platform regulator-sd-vcc: Linked as a consumer to soc:firmware:gpio | |
[ 0.110265] regulator-sd-vcc Dropping the fwnode link to gpio | |
[ 0.110884] device: 'cpu0': device_add | |
[ 0.111099] device: 'cpu1': device_add | |
[ 0.111314] device: 'cpu2': device_add | |
[ 0.111515] device: 'cpu3': device_add | |
[ 0.112661] device: 'writeback': device_add | |
[ 0.114314] platform regulator-sd-vcc: error -EPROBE_DEFER: supplier soc:firmware:gpio not ready | |
[ 0.114523] platform regulator-sd-io-1v8: error -EPROBE_DEFER: supplier soc:firmware:gpio not ready | |
[ 0.115544] SCSI subsystem initialized | |
[ 0.115970] usbcore: registered new interface driver usbfs | |
[ 0.116070] usbcore: registered new interface driver hub | |
[ 0.116195] usbcore: registered new device driver usb | |
[ 0.116612] usb_phy_generic phy: dummy supplies not allowed for exclusive requests | |
[ 0.117074] mc: Linux media interface: v0.10 | |
[ 0.117183] videodev: Linux video capture interface: v2.00 | |
[ 0.117312] pps_core: LinuxPPS API ver. 1 registered | |
[ 0.117334] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ 0.117403] PTP clock support registered | |
[ 0.117848] Advanced Linux Sound Architecture Driver Initialized. | |
[ 0.118022] device: 'lo': device_add | |
[ 0.119669] Bluetooth: Core ver 2.22 | |
[ 0.119763] NET: Registered PF_BLUETOOTH protocol family | |
[ 0.119787] Bluetooth: HCI device and connection manager initialized | |
[ 0.119822] Bluetooth: HCI socket layer initialized | |
[ 0.119850] Bluetooth: L2CAP socket layer initialized | |
[ 0.119911] Bluetooth: SCO socket layer initialized | |
[ 0.120079] device: 'vga_arbiter': device_add | |
[ 0.120423] vgaarb: loaded | |
[ 0.448471] clocksource: Switched to clocksource arch_sys_counter | |
[ 0.449604] device: 'mem': device_add | |
[ 0.449989] device: 'null': device_add | |
[ 0.450200] device: 'port': device_add | |
[ 0.450399] device: 'zero': device_add | |
[ 0.450615] device: 'full': device_add | |
[ 0.450814] device: 'random': device_add | |
[ 0.451018] device: 'urandom': device_add | |
[ 0.451227] device: 'kmsg': device_add | |
[ 0.451467] device: 'tty': device_add | |
[ 0.451702] device: 'console': device_add | |
[ 0.451938] device: 'tty0': device_add | |
[ 0.452231] device: 'vcs': device_add | |
[ 0.452476] device: 'vcsu': device_add | |
[ 0.452687] device: 'vcsa': device_add | |
[ 0.452920] device: 'vcs1': device_add | |
[ 0.453161] device: 'vcsu1': device_add | |
[ 0.453391] device: 'vcsa1': device_add | |
[ 0.453642] device: 'tty1': device_add | |
[ 0.453910] device: 'tty2': device_add | |
[ 0.454142] device: 'tty3': device_add | |
[ 0.454381] device: 'tty4': device_add | |
[ 0.454606] device: 'tty5': device_add | |
[ 0.454838] device: 'tty6': device_add | |
[ 0.455065] device: 'tty7': device_add | |
[ 0.455289] device: 'tty8': device_add | |
[ 0.455515] device: 'tty9': device_add | |
[ 0.455745] device: 'tty10': device_add | |
[ 0.455968] device: 'tty11': device_add | |
[ 0.456193] device: 'tty12': device_add | |
[ 0.456440] device: 'tty13': device_add | |
[ 0.456700] device: 'tty14': device_add | |
[ 0.456945] device: 'tty15': device_add | |
[ 0.457170] device: 'tty16': device_add | |
[ 0.457401] device: 'tty17': device_add | |
[ 0.457630] device: 'tty18': device_add | |
[ 0.457857] device: 'tty19': device_add | |
[ 0.458088] device: 'tty20': device_add | |
[ 0.458313] device: 'tty21': device_add | |
[ 0.458543] device: 'tty22': device_add | |
[ 0.458785] device: 'tty23': device_add | |
[ 0.459012] device: 'tty24': device_add | |
[ 0.459240] device: 'tty25': device_add | |
[ 0.459470] device: 'tty26': device_add | |
[ 0.459702] device: 'tty27': device_add | |
[ 0.459926] device: 'tty28': device_add | |
[ 0.460159] device: 'tty29': device_add | |
[ 0.460390] device: 'tty30': device_add | |
[ 0.460670] device: 'tty31': device_add | |
[ 0.460913] device: 'tty32': device_add | |
[ 0.461147] device: 'tty33': device_add | |
[ 0.461385] device: 'tty34': device_add | |
[ 0.461618] device: 'tty35': device_add | |
[ 0.461850] device: 'tty36': device_add | |
[ 0.462071] device: 'tty37': device_add | |
[ 0.462317] device: 'tty38': device_add | |
[ 0.462544] device: 'tty39': device_add | |
[ 0.462771] device: 'tty40': device_add | |
[ 0.463007] device: 'tty41': device_add | |
[ 0.463258] device: 'tty42': device_add | |
[ 0.463490] device: 'tty43': device_add | |
[ 0.463712] device: 'tty44': device_add | |
[ 0.463948] device: 'tty45': device_add | |
[ 0.464193] device: 'tty46': device_add | |
[ 0.464427] device: 'tty47': device_add | |
[ 0.464693] device: 'tty48': device_add | |
[ 0.464925] device: 'tty49': device_add | |
[ 0.465160] device: 'tty50': device_add | |
[ 0.465385] device: 'tty51': device_add | |
[ 0.465617] device: 'tty52': device_add | |
[ 0.465839] device: 'tty53': device_add | |
[ 0.466071] device: 'tty54': device_add | |
[ 0.466304] device: 'tty55': device_add | |
[ 0.466530] device: 'tty56': device_add | |
[ 0.466775] device: 'tty57': device_add | |
[ 0.467002] device: 'tty58': device_add | |
[ 0.467233] device: 'tty59': device_add | |
[ 0.467453] device: 'tty60': device_add | |
[ 0.467708] device: 'tty61': device_add | |
[ 0.467974] device: 'tty62': device_add | |
[ 0.468209] device: 'tty63': device_add | |
[ 0.468949] NET: Registered PF_INET protocol family | |
[ 0.469512] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
[ 0.479500] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) | |
[ 0.479655] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
[ 0.479795] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
[ 0.480510] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
[ 0.481689] TCP: Hash tables configured (established 32768 bind 32768) | |
[ 0.482101] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
[ 0.482283] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
[ 0.482731] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
[ 0.483942] RPC: Registered named UNIX socket transport module. | |
[ 0.483988] RPC: Registered udp transport module. | |
[ 0.484010] RPC: Registered tcp transport module. | |
[ 0.484030] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.488322] device: 'regulatory.0': device_add | |
[ 0.488984] PCI: CLS 0 bytes, default 64 | |
[ 0.503208] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available | |
[ 0.503889] device: 'clocksource': device_add | |
[ 0.503999] device: 'clocksource0': device_add | |
[ 0.504391] device: 'clockevents': device_add | |
[ 0.504625] device: 'clockevent0': device_add | |
[ 0.504793] device: 'clockevent1': device_add | |
[ 0.504928] device: 'clockevent2': device_add | |
[ 0.505074] device: 'clockevent3': device_add | |
[ 0.505209] device: 'broadcast': device_add | |
[ 0.505603] device: 'software': device_add | |
[ 0.505745] device: 'tracepoint': device_add | |
[ 0.505872] device: 'kprobe': device_add | |
[ 0.506012] device: 'uprobe': device_add | |
[ 0.506161] device: 'breakpoint': device_add | |
[ 0.506284] device: 'armv8_cortex_a72': device_add | |
[ 0.506630] Initialise system trusted keyrings | |
[ 0.507094] workingset: timestamp_bits=62 max_order=20 bucket_order=0 | |
[ 0.534993] Key type asymmetric registered | |
[ 0.535058] Asymmetric key parser 'x509' registered | |
[ 0.535258] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) | |
[ 0.535294] io scheduler mq-deadline registered | |
[ 0.535317] io scheduler kyber registered | |
[ 0.536355] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 18) | |
[ 0.536907] interrupt-controller@40041000 Linked as a fwnode consumer to soc | |
[ 0.536950] interrupt-controller@40041000 Dropping the fwnode link to interrupt-controller@40041000 | |
[ 0.537394] platform soc:firmware: error -EPROBE_DEFER: supplier fe00b880.mailbox not ready | |
[ 0.537557] simple-pm-bus emmc2bus: Dropping the link to fe101000.cprman | |
[ 0.537587] device: 'platform:fe101000.cprman--platform:emmc2bus': device_unregister | |
[ 0.538118] simple-pm-bus scb: Dropping the link to soc:firmware:reset | |
[ 0.538170] device: 'platform:soc:firmware:reset--platform:scb': device_unregister | |
[ 0.538494] simple-pm-bus scb: Dropping the link to soc:firmware:clocks | |
[ 0.538531] device: 'platform:soc:firmware:clocks--platform:scb': device_unregister | |
[ 0.538810] simple-pm-bus scb: Dropping the link to fe100000.watchdog | |
[ 0.538843] device: 'platform:fe100000.watchdog--platform:scb': device_unregister | |
[ 0.540587] device: 'gpiochip0': device_add | |
[ 0.541022] device: 'gpiochip512': device_add | |
[ 0.541246] mmc@7e300000 Linked as a fwnode consumer to gpio@7e200000 | |
[ 0.541278] mmc@7e300000 Dropping the fwnode link to emmc-gpio34 | |
[ 0.541321] i2c@7e205000 Linked as a fwnode consumer to gpio@7e200000 | |
[ 0.541347] i2c@7e205000 Dropping the fwnode link to i2c0-gpio0 | |
[ 0.541382] i2c@7e804000 Linked as a fwnode consumer to gpio@7e200000 | |
[ 0.541407] i2c@7e804000 Dropping the fwnode link to i2c1-gpio2 | |
[ 0.541452] serial@7e201000 Linked as a fwnode consumer to gpio@7e200000 | |
[ 0.541478] serial@7e201000 Dropping the fwnode link to uart0-ctsrts-gpio30 | |
[ 0.541508] serial@7e201000 Dropping the fwnode link to uart0-gpio32 | |
[ 0.541544] serial@7e215040 Linked as a fwnode consumer to gpio@7e200000 | |
[ 0.541570] serial@7e215040 Dropping the fwnode link to uart1-gpio14 | |
[ 0.541667] pwm@7e20c800 Linked as a fwnode consumer to gpio@7e200000 | |
[ 0.541692] pwm@7e20c800 Dropping the fwnode link to pwm1-0-gpio40 | |
[ 0.541728] pwm@7e20c800 Dropping the fwnode link to pwm1-1-gpio41 | |
[ 0.541855] device: 'platform:fe200000.gpio--platform:fe20c800.pwm': device_add | |
[ 0.542057] devices_kset: Moving fe20c800.pwm to end of list | |
[ 0.542088] platform fe20c800.pwm: Linked as a consumer to fe200000.gpio | |
[ 0.542114] pwm@7e20c800 Dropping the fwnode link to gpio@7e200000 | |
[ 0.542165] device: 'platform:fe200000.gpio--platform:fe215040.serial': device_add | |
[ 0.542387] devices_kset: Moving fe215040.serial to end of list | |
[ 0.542415] platform fe215040.serial: Linked as a consumer to fe200000.gpio | |
[ 0.542441] serial@7e215040 Dropping the fwnode link to gpio@7e200000 | |
[ 0.542492] device: 'platform:fe200000.gpio--amba:fe201000.serial': device_add | |
[ 0.542667] devices_kset: Moving fe201000.serial to end of list | |
[ 0.542695] amba fe201000.serial: Linked as a consumer to fe200000.gpio | |
[ 0.542721] serial@7e201000 Dropping the fwnode link to gpio@7e200000 | |
[ 0.542776] device: 'platform:fe200000.gpio--platform:fe804000.i2c': device_add | |
[ 0.542960] devices_kset: Moving fe804000.i2c to end of list | |
[ 0.542987] platform fe804000.i2c: Linked as a consumer to fe200000.gpio | |
[ 0.543013] i2c@7e804000 Dropping the fwnode link to gpio@7e200000 | |
[ 0.543062] device: 'platform:fe200000.gpio--platform:fe205000.i2c': device_add | |
[ 0.543234] devices_kset: Moving fe205000.i2c to end of list | |
[ 0.543260] platform fe205000.i2c: Linked as a consumer to fe200000.gpio | |
[ 0.543286] i2c@7e205000 Dropping the fwnode link to gpio@7e200000 | |
[ 0.543334] device: 'platform:fe200000.gpio--platform:fe300000.mmc': device_add | |
[ 0.543517] devices_kset: Moving fe300000.mmc to end of list | |
[ 0.543543] platform fe300000.mmc: Linked as a consumer to fe200000.gpio | |
[ 0.543569] mmc@7e300000 Dropping the fwnode link to gpio@7e200000 | |
[ 0.544354] platform fe20c800.pwm: error -EPROBE_DEFER: supplier fe101000.cprman not ready | |
[ 0.545340] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: | |
[ 0.545398] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] | |
[ 0.545494] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 | |
[ 0.545576] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000 | |
[ 0.546556] device: 'pci0000:00': device_add | |
[ 0.546700] device: '0000:00': device_add | |
[ 0.546938] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 | |
[ 0.546978] pci_bus 0000:00: root bus resource [bus 00-ff] | |
[ 0.547014] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) | |
[ 0.547116] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 | |
[ 0.547236] pci 0000:00:00.0: PME# supported from D0 D3hot | |
[ 0.547328] device: '0000:00:00.0': device_add | |
[ 0.547889] device: 'platform:soc:firmware:reset--pci:0000:00:00.0': device_add | |
[ 0.548113] pci 0000:00:00.0: Linked as a sync state only consumer to soc:firmware:reset | |
[ 0.551159] device: '0000:01': device_add | |
[ 0.551480] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator | |
[ 0.551674] device: 'regulator:regulator.0--pci_bus:0000:01': device_add | |
[ 0.551875] devices_kset: Moving 0000:01 to end of list | |
[ 0.551901] pci_bus 0000:01: Linked as a consumer to regulator.0 | |
[ 0.551935] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator | |
[ 0.552094] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator | |
[ 0.662547] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) | |
[ 0.662796] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 | |
[ 0.662888] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] | |
[ 0.663167] pci 0000:01:00.0: PME# supported from D0 D3cold | |
[ 0.663381] device: '0000:01:00.0': device_add | |
[ 0.664013] device: 'platform:soc:firmware:reset--pci:0000:01:00.0': device_add | |
[ 0.664229] devices_kset: Moving 0000:01:00.0 to end of list | |
[ 0.664257] pci 0000:01:00.0: Linked as a consumer to soc:firmware:reset | |
[ 0.664284] usb@0,0 Dropping the fwnode link to reset | |
[ 0.672686] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] | |
[ 0.672741] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] | |
[ 0.672793] pci 0000:00:00.0: PCI bridge to [bus 01] | |
[ 0.672822] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] | |
[ 0.673276] pcieport 0000:00:00.0: enabling device (0000 -> 0002) | |
[ 0.673356] device: '0000:00:00.0:pcie001': device_add | |
[ 0.673739] pcieport 0000:00:00.0: PME: Signaling with IRQ 23 | |
[ 0.673889] device: '0000:00:00.0:pcie002': device_add | |
[ 0.674502] pcieport 0000:00:00.0: AER: enabled with IRQ 23 | |
[ 0.674690] device: '0000:00:00.0:pcie010': device_add | |
[ 0.675180] pcieport 0000:00:00.0: Dropping the link to soc:firmware:reset | |
[ 0.675210] device: 'platform:soc:firmware:reset--pci:0000:00:00.0': device_unregister | |
[ 0.675710] brcm-pcie fd500000.pcie: Dropping the link to soc:firmware:reset | |
[ 0.675750] device: 'platform:soc:firmware:reset--platform:fd500000.pcie': device_unregister | |
[ 0.682210] device: 'dma0chan0': device_add | |
[ 0.682444] device: 'dma0chan1': device_add | |
[ 0.682652] device: 'dma0chan2': device_add | |
[ 0.682835] device: 'dma0chan3': device_add | |
[ 0.683012] device: 'dma0chan4': device_add | |
[ 0.683188] device: 'dma0chan5': device_add | |
[ 0.683368] device: 'dma0chan6': device_add | |
[ 0.683539] device: 'dma0chan7': device_add | |
[ 0.683725] device: 'dma0chan8': device_add | |
[ 0.685392] device: 'ptmx': device_add | |
[ 0.685715] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
[ 0.685787] device: 'serial8250': device_add | |
[ 0.685992] device: 'serial0': device_add | |
[ 0.686205] device: 'ttyS0': device_add | |
[ 0.686582] device: 'serial0': device_add | |
[ 0.686773] device: 'ttyS1': device_add | |
[ 0.687161] device: 'serial0': device_add | |
[ 0.687362] device: 'ttyS2': device_add | |
[ 0.687701] device: 'serial0': device_add | |
[ 0.687899] device: 'ttyS3': device_add | |
[ 0.689130] device: 'ttyS1': device_unregister | |
[ 0.689885] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 31, base_baud = 62500001) is a 16550 | |
[ 0.689970] printk: console [ttyS1] enabled | |
[ 6.775041] device: 'serial0': device_add | |
[ 6.779536] device: 'ttyS1': device_add | |
[ 6.784398] device: 'kgdboc': device_add | |
[ 6.788828] device: 'ttyprintk': device_add | |
[ 6.793620] platform fe400000.hvs: error -EPROBE_DEFER: supplier soc:firmware:clocks not ready | |
[ 6.802812] platform fef00700.hdmi: error -EPROBE_DEFER: supplier soc:firmware:clocks not ready | |
[ 6.811789] platform fef05700.hdmi: error -EPROBE_DEFER: supplier soc:firmware:clocks not ready | |
[ 6.825484] device: 'cache': device_add | |
[ 6.829523] device: 'index0': device_add | |
[ 6.833639] device: 'index1': device_add | |
[ 6.837738] device: 'index2': device_add | |
[ 6.841888] device: 'cache': device_add | |
[ 6.845872] device: 'index0': device_add | |
[ 6.849984] device: 'index1': device_add | |
[ 6.854077] device: 'index2': device_add | |
[ 6.858230] device: 'cache': device_add | |
[ 6.862209] device: 'index0': device_add | |
[ 6.866486] device: 'index1': device_add | |
[ 6.870606] device: 'index2': device_add | |
[ 6.874760] device: 'cache': device_add | |
[ 6.878758] device: 'index0': device_add | |
[ 6.882873] device: 'index1': device_add | |
[ 6.887006] device: 'index2': device_add | |
[ 6.891582] device: 'bcm2835-wdt': device_add | |
[ 6.896313] device: 'bcm2835-power': device_add | |
[ 6.901590] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver | |
[ 6.912506] device: 'Fixed MDIO bus.0': device_add | |
[ 6.917658] device: 'fixed-0': device_add | |
[ 6.924427] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 | |
[ 6.930579] device: 'unimac-mdio.-19': device_add | |
[ 6.935938] device: 'unimac-mdio--19': device_add | |
[ 14.839801] device: 'unimac-mdio--19:01': device_add | |
[ 14.916589] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus | |
[ 14.922940] device: 'eth0': device_add | |
[ 14.929030] usbcore: registered new interface driver zd1211rw | |
[ 14.934997] usbcore: registered new interface driver lan78xx | |
[ 14.940842] usbcore: registered new interface driver asix | |
[ 14.946420] usbcore: registered new interface driver ax88179_178a | |
[ 14.952711] usbcore: registered new interface driver cdc_ether | |
[ 14.958735] usbcore: registered new interface driver smsc95xx | |
[ 14.964667] usbcore: registered new interface driver net1080 | |
[ 14.970513] usbcore: registered new interface driver cdc_subset | |
[ 14.976627] usbcore: registered new interface driver zaurus | |
[ 14.982398] usbcore: registered new interface driver cdc_ncm | |
[ 14.988242] usbcore: registered new interface driver r8153_ecm | |
[ 14.994504] platform fe980000.usb: error -EPROBE_DEFER: supplier soc:power not ready | |
[ 15.003625] pci 0000:01:00.0: error -EPROBE_DEFER: supplier soc:firmware:reset not ready | |
[ 15.004051] usbcore: registered new interface driver usb-storage | |
[ 15.018317] i2c_dev: i2c /dev entries driver | |
[ 15.023511] device: 'i2c-0': device_add | |
[ 15.027610] device: 'i2c-0': device_add | |
[ 15.032557] device: 'i2c-1': device_add | |
[ 15.036626] device: 'i2c-1': device_add | |
[ 15.041583] device: 'i2c-2': device_add | |
[ 15.045672] device: 'i2c-2': device_add | |
[ 15.049993] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode | |
[ 15.057298] device: 'i2c-3': device_add | |
[ 15.061370] device: 'i2c-3': device_add | |
[ 15.065691] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode | |
[ 15.073372] device: 'thermal_zone0': device_add | |
[ 15.078330] device: 'hwmon0': device_add | |
[ 15.083265] device: 'watchdog': device_add | |
[ 15.087815] device: 'watchdog0': device_add | |
[ 15.092358] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer | |
[ 15.099245] platform wifi-pwrseq: error -EPROBE_DEFER: supplier soc:firmware:gpio not ready | |
[ 15.108115] sdhci: Secure Digital Host Controller Interface driver | |
[ 15.114421] sdhci: Copyright(c) Pierre Ossman | |
[ 15.119021] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 15.125108] platform fe340000.mmc: error -EPROBE_DEFER: supplier regulator-sd-io-1v8 not ready | |
[ 15.134118] device: 'ACT': device_add | |
[ 15.138134] device: 'ACT': device_unregister | |
[ 15.142675] device: 'ACT': device_create_release | |
[ 15.147666] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 15.153959] platform soc:firmware: error -EPROBE_DEFER: supplier fe00b880.mailbox not ready | |
[ 15.162848] usbcore: registered new interface driver usbhid | |
[ 15.168557] usbhid: USB HID core driver | |
[ 15.172932] bcm2835-mbox fe00b880.mailbox: mailbox enabled | |
[ 15.178813] device: 'timer': device_add | |
[ 15.183237] device: 'snd-soc-dummy': device_add | |
[ 15.189252] NET: Registered PF_INET6 protocol family | |
[ 15.196540] Segment Routing with IPv6 | |
[ 15.200385] In-situ OAM (IOAM) with IPv6 | |
[ 15.204551] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
[ 15.210657] device: 'sit0': device_add | |
[ 15.215794] NET: Registered PF_PACKET protocol family | |
[ 15.242566] Loading compiled-in X.509 certificates | |
[ 15.283746] devices_kset: Moving fe201000.serial to end of list | |
[ 15.290858] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 37, base_baud = 0) is a PL011 rev2 | |
[ 15.299964] device: 'serial0': device_add | |
[ 15.304230] device: 'serial0-0': device_add | |
[ 15.308686] serial serial0: tty port ttyAMA0 registered | |
[ 15.314054] uart-pl011 fe201000.serial: Dropping the link to soc:firmware:gpio | |
[ 15.321423] device: 'platform:soc:firmware:gpio--amba:fe201000.serial': device_unregister | |
[ 15.330101] devices_kset: Moving regulator-sd-vcc to end of list | |
[ 15.336234] devices_kset: Moving fe340000.mmc to end of list | |
[ 15.342039] platform regulator-sd-vcc: error -EPROBE_DEFER: supplier soc:firmware:gpio not ready | |
[ 15.351009] devices_kset: Moving regulator-sd-io-1v8 to end of list | |
[ 15.357399] devices_kset: Moving fe340000.mmc to end of list | |
[ 15.363196] platform regulator-sd-io-1v8: error -EPROBE_DEFER: supplier soc:firmware:gpio not ready | |
[ 15.372430] devices_kset: Moving soc:firmware to end of list | |
[ 15.378203] devices_kset: Moving soc:firmware:clocks to end of list | |
[ 15.384592] devices_kset: Moving fef05700.hdmi to end of list | |
[ 15.390450] devices_kset: Moving fef00700.hdmi to end of list | |
[ 15.396309] devices_kset: Moving fe400000.hvs to end of list | |
[ 15.402092] devices_kset: Moving fec00000.gpu to end of list | |
[ 15.407866] devices_kset: Moving soc:firmware:gpio to end of list | |
[ 15.414078] devices_kset: Moving wifi-pwrseq to end of list | |
[ 15.419760] devices_kset: Moving regulator-sd-io-1v8 to end of list | |
[ 15.426148] devices_kset: Moving fe340000.mmc to end of list | |
[ 15.431918] devices_kset: Moving regulator-sd-vcc to end of list | |
[ 15.438041] devices_kset: Moving fe340000.mmc to end of list | |
[ 15.443813] devices_kset: Moving soc:firmware:reset to end of list | |
[ 15.450115] devices_kset: Moving 0000:01:00.0 to end of list | |
[ 15.456506] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-02-12T12:36:21 | |
[ 15.465176] device: 'raspberrypi-hwmon': device_add | |
[ 15.470446] devices_kset: Moving soc:firmware:gpio to end of list | |
[ 15.476679] devices_kset: Moving wifi-pwrseq to end of list | |
[ 15.482363] devices_kset: Moving regulator-sd-io-1v8 to end of list | |
[ 15.488752] devices_kset: Moving fe340000.mmc to end of list | |
[ 15.494522] devices_kset: Moving regulator-sd-vcc to end of list | |
[ 15.500645] devices_kset: Moving fe340000.mmc to end of list | |
[ 15.506884] device: 'gpiochip1': device_add | |
[ 15.511508] device: 'gpiochip570': device_add | |
[ 15.516166] uart-pl011 fe201000.serial: Failed to create device link (0x180) with soc:firmware:gpio | |
[ 15.525501] devices_kset: Moving fe20c800.pwm to end of list | |
[ 15.531836] device: 'pwmchip0': device_add | |
[ 15.536255] devices_kset: Moving soc:firmware:clocks to end of list | |
[ 15.542650] devices_kset: Moving fef05700.hdmi to end of list | |
[ 15.548514] devices_kset: Moving fef00700.hdmi to end of list | |
[ 15.554373] devices_kset: Moving fe400000.hvs to end of list | |
[ 15.560143] devices_kset: Moving fec00000.gpu to end of list | |
[ 15.569061] device: 'raspberrypi-cpufreq': device_add | |
[ 15.574918] device: 'cpufreq-dt': device_add | |
[ 15.580413] devices_kset: Moving soc:power to end of list | |
[ 15.585966] devices_kset: Moving fe980000.usb to end of list | |
[ 15.592299] devices_kset: Moving soc:firmware:reset to end of list | |
[ 15.598628] devices_kset: Moving 0000:01:00.0 to end of list | |
[ 15.604705] devices_kset: Moving fe400000.hvs to end of list | |
[ 15.610748] devices_kset: Moving fef00700.hdmi to end of list | |
[ 15.616857] devices_kset: Moving fef05700.hdmi to end of list | |
[ 15.623896] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001 | |
[ 15.632528] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22 | |
[ 15.640058] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops) | |
[ 15.648034] device: 'hdmi-audio-codec.0.auto': device_add | |
[ 15.654111] device: 'MAI': device_add | |
[ 15.659593] device: 'card0': device_add | |
[ 15.663761] device: 'pcmC0D0p': device_add | |
[ 15.668366] device: 'controlC0': device_add | |
[ 15.673068] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops) | |
[ 15.681324] device: 'hdmi-audio-codec.1.auto': device_add | |
[ 15.687320] device: 'MAI': device_add | |
[ 15.693265] device: 'card1': device_add | |
[ 15.697428] device: 'pcmC1D0p': device_add | |
[ 15.702037] device: 'controlC1': device_add | |
[ 15.706738] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops) | |
[ 15.713453] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops) | |
[ 15.719823] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops) | |
[ 15.726905] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops) | |
[ 15.733929] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops) | |
[ 15.740831] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops) | |
[ 15.752050] device: 'card0': device_add | |
[ 15.756719] device: 'card0-HDMI-A-1': device_add | |
[ 15.761841] device: 'card0-HDMI-A-2': device_add | |
[ 15.766917] device: 'card0-Writeback-1': device_add | |
[ 15.772331] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 | |
[ 15.778856] devices_kset: Moving fe980000.usb to end of list | |
[ 15.810603] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator | |
[ 15.818046] device: 'regulator:regulator.0--platform:fe980000.usb': device_add | |
[ 15.825632] devices_kset: Moving fe980000.usb to end of list | |
[ 15.831414] dwc2 fe980000.usb: Linked as a consumer to regulator.0 | |
[ 15.837759] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator | |
[ 15.946805] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM | |
[ 15.954548] device: 'fe980000.usb': device_add | |
[ 15.959384] device: 'gadget.0': device_add | |
[ 15.963816] devices_kset: Moving 0000:01:00.0 to end of list | |
[ 15.969678] devices_kset: Moving wifi-pwrseq to end of list | |
[ 15.976682] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002) | |
[ 15.977103] devices_kset: Moving fe340000.mmc to end of list | |
[ 15.988707] xhci_hcd 0000:01:00.0: xHCI Host Controller | |
[ 15.988888] devices_kset: Moving fe300000.mmc to end of list | |
[ 15.989092] platform fe340000.mmc: error -EPROBE_DEFER: supplier regulator-sd-io-1v8 not ready | |
[ 15.994069] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 | |
[ 15.999993] devices_kset: Moving leds to end of list | |
[ 16.000819] sdhci-iproc fe300000.mmc: allocated mmc-pwrseq | |
[ 16.001870] device: 'mmc0::': device_add | |
[ 16.002086] device: 'mmc0': device_add | |
[ 16.009686] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890 | |
[ 16.016514] device: 'ACT': device_add | |
[ 16.028498] device: 'PWR': device_add | |
[ 16.032000] xhci_hcd 0000:01:00.0: xHCI Host Controller | |
[ 16.034848] leds-gpio leds: Dropping the link to fe200000.gpio | |
[ 16.039712] mmc0: SDHCI controller on fe300000.mmc [fe300000.mmc] using PIO | |
[ 16.043796] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 | |
[ 16.047522] device: 'platform:fe200000.gpio--platform:leds': device_unregister | |
[ 16.047555] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed | |
[ 16.051578] leds-gpio leds: Dropping the link to soc:firmware:gpio | |
[ 16.057067] device: 'usb1': device_add | |
[ 16.062551] device: 'platform:soc:firmware:gpio--platform:leds': device_unregister | |
[ 16.109222] devices_kset: Moving regulator-sd-vcc to end of list | |
[ 16.109294] device: '1-0:1.0': device_add | |
[ 16.115350] devices_kset: Moving fe340000.mmc to end of list | |
[ 16.119719] hub 1-0:1.0: USB hub found | |
[ 16.127198] device: 'regulator.1': device_add | |
[ 16.129116] hub 1-0:1.0: 1 port detected | |
[ 16.133813] devices_kset: Moving regulator-sd-io-1v8 to end of list | |
[ 16.137583] device: 'usb1-port1': device_add | |
[ 16.143773] devices_kset: Moving fe340000.mmc to end of list | |
[ 16.148570] device: 'ep_81': device_add | |
[ 16.155649] device: 'regulator.2': device_add | |
[ 16.158020] device: 'ep_00': device_add | |
[ 16.162579] devices_kset: Moving fe340000.mmc to end of list | |
[ 16.166830] device: 'usb2': device_add | |
[ 16.172966] device: 'regulator:regulator.1--platform:fe340000.mmc': device_add | |
[ 16.175357] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
[ 16.189508] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
[ 16.191221] devices_kset: Moving fe340000.mmc to end of list | |
[ 16.196967] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 | |
[ 16.202465] sdhci-iproc fe340000.mmc: Linked as a consumer to regulator.1 | |
[ 16.218389] ALSA device list: | |
[ 16.218614] device: '2-0:1.0': device_add | |
[ 16.218676] device: 'regulator:regulator.2--platform:fe340000.mmc': device_add | |
[ 16.218859] devices_kset: Moving fe340000.mmc to end of list | |
[ 16.218869] sdhci-iproc fe340000.mmc: Linked as a consumer to regulator.2 | |
[ 16.219567] device: 'mmc1::': device_add | |
[ 16.219764] device: 'mmc1': device_add | |
[ 16.221496] cfg80211: failed to load regulatory.db | |
[ 16.225813] hub 2-0:1.0: USB hub found | |
[ 16.233005] #0: vc4-hdmi-0 | |
[ 16.238812] hub 2-0:1.0: 4 ports detected | |
[ 16.245623] #1: vc4-hdmi-1 | |
[ 16.249729] device: 'usb2-port1': device_add | |
[ 16.256506] mmc1: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA | |
[ 16.258564] device: 'usb2-port2': device_add | |
[ 16.275316] mmc0: new high speed SDIO card at address 0001 | |
[ 16.277264] device: 'usb2-port3': device_add | |
[ 16.283542] device: 'mmc0:0001': device_add | |
[ 16.288153] device: 'usb2-port4': device_add | |
[ 16.293717] device: 'mmc0:0001:1': device_add | |
[ 16.298521] device: 'ep_81': device_add | |
[ 16.302197] device: 'mmc0:0001:2': device_add | |
[ 16.306586] device: 'ep_00': device_add | |
[ 16.310933] device: 'mmc0:0001:3': device_add | |
[ 16.338637] ================================================================== | |
[ 16.346019] BUG: KASAN: slab-out-of-bounds in ftrace_free_mem+0x270/0x5a4 | |
[ 16.352944] Read of size 8 at addr ffffff804001fff0 by task swapper/0/1 | |
[ 16.359675] | |
[ 16.361195] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-10218-g0efd488e2948-dirty #75 | |
[ 16.371021] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) | |
[ 16.376955] Call trace: | |
[ 16.379444] dump_backtrace+0xf0/0x134 | |
[ 16.383267] show_stack+0x20/0x38 | |
[ 16.386646] dump_stack_lvl+0x48/0x60 | |
[ 16.390380] print_report+0xa0/0x4b0 | |
[ 16.392564] mmc1: new ultra high speed DDR50 SDHC card at address 0001 | |
[ 16.394012] kasan_report+0x98/0xac | |
[ 16.400735] device: 'mmc1:0001': device_add | |
[ 16.404159] __asan_load8+0x2c/0x88 | |
[ 16.410255] mmcblk1: mmc1:0001 EB1QT 29.8 GiB | |
[ 16.411929] ftrace_free_mem+0x270/0x5a4 | |
[ 16.412527] usb 1-1: new high-speed USB device number 2 using xhci_hcd | |
[ 16.417596] device: 'mmcblk1': device_add | |
[ 16.420412] ftrace_free_init_mem+0x28/0x34 | |
[ 16.429395] device: '179:0': device_add | |
[ 16.431097] kernel_init+0x44/0x150 | |
[ 16.442901] ret_from_fork+0x10/0x20 | |
[ 16.446554] | |
[ 16.448073] Allocated by task 0: | |
[ 16.451358] kasan_save_stack+0x2c/0x54 | |
[ 16.455270] kasan_set_track+0x2c/0x40 | |
[ 16.459089] kasan_save_alloc_info+0x24/0x34 | |
[ 16.463441] ____kasan_kmalloc+0x84/0x9c | |
[ 16.467436] __kasan_kmalloc+0x10/0x1c | |
[ 16.471254] kmalloc_node_trace+0x94/0xc4 | |
[ 16.475343] alloc_desc+0x60/0x2d4 | |
[ 16.478813] __irq_alloc_descs+0x170/0x220 | |
[ 16.482984] irq_domain_alloc_descs.part.0+0x6c/0xb4 | |
[ 16.488043] irq_domain_alloc_descs+0x50/0x5c | |
[ 16.492484] irq_domain_alloc_irqs_locked+0x5c/0x39c | |
[ 16.497538] __irq_domain_alloc_irqs+0xc0/0xe4 | |
[ 16.502062] __gic_init_bases+0x174/0x23c | |
[ 16.506150] gic_of_init+0x174/0x494 | |
[ 16.509791] of_irq_init+0x340/0x5f4 | |
[ 16.513435] irqchip_init+0x20/0x34 | |
[ 16.516993] init_IRQ+0x78/0xfc | |
[ 16.520193] start_kernel+0x1c4/0x398 | |
[ 16.523927] __primary_switched+0xb8/0xc8 | |
[ 16.528012] | |
[ 16.529528] The buggy address belongs to the object at ffffff804001fc00 | |
[ 16.529528] which belongs to the cache kmalloc-512 of size 512 | |
[ 16.542263] The buggy address is located 560 bytes to the right of | |
[ 16.542263] allocated 448-byte region [ffffff804001fc00, ffffff804001fdc0) | |
[ 16.555617] | |
[ 16.557134] The buggy address belongs to the physical page: | |
[ 16.562802] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4001c | |
[ 16.572272] head:(____ptrval____) order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0 | |
[ 16.580505] flags: 0x4000000000010200(slab|head|zone=1) | |
[ 16.585833] raw: 4000000000010200 ffffff8040002600 dead000000000122 0000000000000000 | |
[ 16.593715] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 | |
[ 16.601591] page dumped because: kasan: bad access detected | |
[ 16.607257] | |
[ 16.608773] Memory state around the buggy address: | |
[ 16.613647] ffffff804001fe80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc | |
[ 16.620997] ffffff804001ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc | |
[ 16.628345] >ffffff804001ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc | |
[ 16.635691] ^ | |
[ 16.642683] ffffff8040020000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
[ 16.650031] ffffff8040020080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
[ 16.657377] ================================================================== | |
[ 16.664930] Disabling lock debugging due to kernel taint | |
[ 16.670572] mmcblk1: p1 p2 | |
[ 16.673817] device: 'mmcblk1p1': device_add | |
[ 16.678930] device: 'mmcblk1p2': device_add | |
[ 16.785894] Freeing unused kernel memory: 116864K | |
[ 16.791030] Run /init as init process | |
[ 16.819962] device: '1-1': device_add | |
[ 16.825801] device: '1-1:1.0': device_add | |
[ 16.830347] hub 1-1:1.0: USB hub found | |
[ 16.834570] hub 1-1:1.0: 4 ports detected | |
[ 16.839452] device: '1-1-port1': device_add | |
[ 16.844115] device: '1-1-port2': device_add | |
[ 16.848684] device: '1-1-port3': device_add | |
[ 16.853226] device: '1-1-port4': device_add | |
Starting syslogd: OK | |
[ 16.865630] device: 'ep_81': device_add | |
Starting[ 16.869961] device: 'ep_00': device_add | |
klogd: OK | |
Running sysctl: OK | |
Saving random seed: [ 17.152500] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd | |
[ 17.259325] device: '1-1.1': device_add | |
[ 17.267573] device: '1-1.1:1.0': device_add | |
[ 17.272137] device: 'ep_83': device_add | |
[ 17.276214] device: 'ep_04': device_add | |
[ 17.280293] device: 'ep_06': device_add | |
[ 17.284365] device: 'ep_0d': device_add | |
[ 17.288567] device: 'ep_00': device_add | |
[ 18.296490] random: crng init done | |
OK | |
Starting system message bus: done | |
Starting bluetoothd: OK | |
Starting network: OK | |
Starting dropbear sshd: OK | |
Welcome to Buildroot | |
buildroot login: Connection closed by foreign host. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment