Skip to content

Instantly share code, notes, and snippets.

@Whateverable

Whateverable/query

Created October 3, 2017 00:09
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save Whateverable/5049c109fce53fa78ff969a44ba66366 to your computer and use it in GitHub Desktop.
Save Whateverable/5049c109fce53fa78ff969a44ba66366 to your computer and use it in GitHub Desktop.
Download ZIP
bisectable6
Raw
query
old=2015.07 say <a b c d e>.roll(-9999999999999999999999999999999999999999999999999).perl;
Raw
result
Bisecting: 4177 revisions left to test after this (roughly 12 steps)
[3ae7477fb942af1309e9829b0cdc1c08945c4b20] Remove profanity in error message.
»»»»» Testing 3ae7477fb942af1309e9829b0cdc1c08945c4b20
»»»»» Script output:
Cannot unbox 163 bit wide bigint into native integer
in block <unit> at /tmp/azyVMeLRXQ line 1
»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing a5bb2df534ffcc93fd70f25428e77a5160087385
»»»»» Script output:
Cannot unbox 163 bit wide bigint into native integer
in block <unit> at /tmp/azyVMeLRXQ:1
»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing f8ee5f69d1bdadb13287a6f5fc2bd3f80f316c43
»»»»» Script output:
Cannot unbox 163 bit wide bigint into native integer
in block <unit> at /tmp/azyVMeLRXQ:1
»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 778b1fb61ce8c80f86610d7abc199f4033614edc
»»»»» Script output:
«timed out after 10 seconds»
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 5abac3c8feb106ab803bcc031cfa45580455f3d5
»»»»» Script output:
Cannot unbox 163 bit wide bigint into native integer
in block <unit> at /tmp/azyVMeLRXQ:1
»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing b306eaee770c494e802e26c5031b97eaac7b0c4c
»»»»» Script output:
Cannot unbox 163 bit wide bigint into native integer
in block <unit> at /tmp/azyVMeLRXQ:1
»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 30cc6a31cde066ebda18bd7ae749a3d9c1041958
»»»»» Script output:
Cannot unbox 163 bit wide bigint into native integer
in block <unit> at /tmp/azyVMeLRXQ:1
»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 2003eac8373e1d0cf269ee52aed73e7d0188ea5c
»»»»» Script output:
Cannot unbox 163 bit wide bigint into native integer
in block <unit> at /tmp/azyVMeLRXQ:1
»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing f09891f9c763c166068337927906ed2a8db94134
»»»»» Script output:
Cannot unbox 163 bit wide bigint into native integer
in block <unit> at /tmp/azyVMeLRXQ:1
»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing fca287328b21c93b0954e42bd8c8949383d18305
»»»»» Script output:
«timed out after 10 seconds»
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 8f5dd0dabda5d1cd84eb07a58cea54606a8cad8c
»»»»» Script output:
«timed out after 10 seconds»
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 23b3d29da6ffd8e016ea6da6c34858b95339af34
»»»»» Script output:
Cannot unbox 163 bit wide bigint into native integer
in block <unit> at /tmp/azyVMeLRXQ:1
»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing ca6b9e6542958ab252afd6a1bae3c641e5941de2
»»»»» Script output:
«timed out after 10 seconds»
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
23b3d29da6ffd8e016ea6da6c34858b95339af34 is the first new commit
commit 23b3d29da6ffd8e016ea6da6c34858b95339af34
Author: Tobias Leich <email@froggs.de>
Date: Thu Aug 27 12:29:04 2015 +0200
bump nqp/moar revision
:040000 040000 280cf1396683874335d661bf1e04c36821cc4ddf 45f4693035e0d47ce8b4301195b40d4a5b65d855 M tools
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment