bisectable6

query

my (@a, @b) := [Z] <a 1>, <b 2>, <c 3>; say @a;

result

Bisecting: 2303 revisions left to test after this (roughly 11 steps)
[4bd09a75a1d53e79f888fdc7405dc2713f4459ab] Split off array operators into a separate file
»»»»» Testing 4bd09a75a1d53e79f888fdc7405dc2713f4459ab
»»»»» Script output:
Too few positionals passed; expected 2 arguments but got 0
  in block <unit> at /tmp/XHSVBsWhli line 1

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 25a3cc54b13303b1e0756d1607f6d003ad13f8c6
»»»»» Script output:
Too few positionals passed; expected 2 arguments but got 0
  in block <unit> at /tmp/XHSVBsWhli line 1

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 3b0dec32553941213486b43bf4483d5a653f92ac
»»»»» Script output:
Too few positionals passed; expected 2 arguments but got 0
  in block <unit> at /tmp/XHSVBsWhli line 1

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 2f22b701d4cf44fa43500edcc3450718fa7fd468
»»»»» Script output:
(a b c)
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 858a3d50fda4716cc00dea4329fdbd9087c38bd5
»»»»» Script output:
(a b c)
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 9e9449e3e846ad5a5df73a1cf19eb3d6772c66fa
»»»»» Script output:
Too few positionals passed; expected 2 arguments but got 0
  in block <unit> at /tmp/XHSVBsWhli line 1

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 6d12cecc955ed997a832cff14346eb082456af19
»»»»» Script output:
(a b c)
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 6641df8342f9b31d45ac31c273eb00ee1201d00d
»»»»» Script output:
(a b c)
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 54f50956ad1679ea3d133b04d28cb57d409aeff6
»»»»» Script output:
Too few positionals passed; expected 2 arguments but got 0
  in block <unit> at /tmp/XHSVBsWhli line 1

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing afd24a881d27969ad4d0e5f63d2981df32cb92da
»»»»» Script output:
Too few positionals passed; expected 2 arguments but got 0
  in block <unit> at /tmp/XHSVBsWhli line 1

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 98e137b1fe6f24a1f66b821518b892dfe6169dbd
»»»»» Script output:
(a b c)
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 1562da070d577247b95d347efecf043a3150822a
»»»»» Script output:
Too few positionals passed; expected 2 arguments but got 0
  in block <unit> at /tmp/XHSVBsWhli line 1

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
98e137b1fe6f24a1f66b821518b892dfe6169dbd is the first new commit
commit 98e137b1fe6f24a1f66b821518b892dfe6169dbd
Author: Zoffix Znet <cpan@zoffix.com>
Date:   Fri Apr 28 21:50:38 2017 +0000

    Implement Seq.Capture
    
    So users could unpack Seqs into stuff.
    
    Fixes issue mentioned in comments in RT#131222:
    https://rt.perl.org/Ticket/Display.html?id=131222#txn-1458022

:040000 040000 a4fc1c023c6bcb18bf28e6c766c5a89246071c32 361682075517919e8988d68074a558eb9ac8780f M	src