bisectable6

query

old=2017.08 chdir ‘sandbox’; run <perl6 --profile -e>, ｢say + ^100 .grep( *.indices("7") == 2 )｣

result

Bisecting: 1765 revisions left to test after this (roughly 11 steps)
[34b294d2e1cf602ae3f18cb4e73c9bebceb03722] Give HyperToIterator its own push-all
»»»»» Testing 34b294d2e1cf602ae3f18cb4e73c9bebceb03722
»»»»» Script output:
1
Writing profiler output to profile-1542291352.45219.html

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing b2fbf893dba0df2d67d66b0cb54feb5228de1249
»»»»» Script output:
1
Writing profiler output to profile-1542291354.97588.html

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 338a097246f549d48de3ee9c7157ac9ca24921ef
»»»»» Script output:
1
Writing profiler output to profile-1542291357.3862.html

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing b16aba019b31d1616931e09fb72fe96fed48d953
»»»»» Script output:
1
Writing profiler output to profile-1542291359.94378.html

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 29691b2f83254bbb99ad7f365a905c7ab3f67087
»»»»» Script output:
1
Writing profiler output to profile-1542291362.37218.html

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 51709e01c0788c466af2e3025b490ded20daf396
»»»»» Script output:
1
MoarVM oops: Spesh inline: fix_coderef NYI

The spawned command 'perl6' exited unsuccessfully (exit code: 1)
  in block <unit> at /tmp/60xizT8_yt line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing d0d105b8b6201c1a2d11f2645d386981a2ea806a
»»»»» Script output:
1
Writing profiler output to profile-1542291367.05799.html

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing fc632cd8da5cc3bd4a4f5c0b85f1f4c911e68a85
»»»»» Script output:
1
MoarVM oops: Spesh inline: fix_coderef NYI

The spawned command 'perl6' exited unsuccessfully (exit code: 1)
  in block <unit> at /tmp/60xizT8_yt line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 75c987047e5d3df7028e86f3d95a8e54bf959b8e
»»»»» Script output:
1
Writing profiler output to profile-1542291371.75819.html

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 0877278edea1b34ba6d2d61950099ce2b5779faa
»»»»» Script output:
1
MoarVM oops: Spesh inline: fix_coderef NYI

The spawned command 'perl6' exited unsuccessfully (exit code: 1)
  in block <unit> at /tmp/60xizT8_yt line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 1f411693bd60b81b018e0c8457d003bebea8374d
»»»»» Script output:
1
MoarVM oops: Spesh inline: fix_coderef NYI

The spawned command 'perl6' exited unsuccessfully (exit code: 1)
  in block <unit> at /tmp/60xizT8_yt line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 13b6a33c20f7deb78f22c16d90113ff9f0843a50
»»»»» Script output:
1
Writing profiler output to profile-1542291378.79261.html

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
13b6a33c20f7deb78f22c16d90113ff9f0843a50 is the first new commit
commit 13b6a33c20f7deb78f22c16d90113ff9f0843a50
Author: Jonathan Worthington <jnthn@jnthn.net>
Date:   Mon Sep 4 12:16:31 2017 +0200

    Fix thread safety issues in the `signal` sub.

:040000 040000 b2b76ce32d6c2c07015b78ef8bfb1523508ad7c7 5f532e3c83fe8a08a919bc39da078d9ed780db35 M	src