bisectable6

query

sub ztask( (:$key, :$value) ) {}; ztask ‘foo’.any => ‘bar’;

result

Bisecting: 4999 revisions left to test after this (roughly 12 steps)
[a2090821b434b9f47439ffa33dadbdcd05962856] make sure IO::Socket passes a list to set-line-separators
»»»»» Testing a2090821b434b9f47439ffa33dadbdcd05962856
»»»»» Script output:
«timed out after 10 seconds»
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 0 (None)
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing e23566e19b40aa4781e8789ee9783036e9b04bca
»»»»» Script output:
«timed out after 10 seconds»
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 0 (None)
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing e4daf8ad3168a52863849e60fc7faa36c89c8646
»»»»» Script output:
cannot stringify this
  in sub ztask at /tmp/Cr9HmXZSIq line 1
  in block <unit> at /tmp/Cr9HmXZSIq line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 0 (None)
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing a87fc7d0bcff5166b4c4298f1312ba5fcea745cc
»»»»» Script output:
cannot stringify this
  in sub ztask at /tmp/Cr9HmXZSIq line 1
  in block <unit> at /tmp/Cr9HmXZSIq line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 0 (None)
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 090c392542cebb79687a7065129f5f39501b636d
»»»»» Script output:
«timed out after 10 seconds»
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 0 (None)
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing ac0c831a8237411f1f1955fe02826fedaa948e74
»»»»» Script output:
«timed out after 10 seconds»
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 0 (None)
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 43b4f3d02faff225ec0930f7a9fc3f31b3677986
»»»»» Script output:
cannot stringify this
  in sub ztask at /tmp/Cr9HmXZSIq line 1
  in block <unit> at /tmp/Cr9HmXZSIq line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 0 (None)
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 899136068bb6ab44fba91eac87fc9f3532cd065b
»»»»» Script output:
cannot stringify this
  in sub ztask at /tmp/Cr9HmXZSIq line 1
  in block <unit> at /tmp/Cr9HmXZSIq line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 0 (None)
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing e51cc333dcded8c78d038c41901f651d109e269e
»»»»» Script output:
«timed out after 10 seconds»
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 0 (None)
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 8be36b1228c8b1b455e00ea1e8e69c8d72598424
»»»»» Script output:
cannot stringify this
  in sub ztask at /tmp/Cr9HmXZSIq line 1
  in block <unit> at /tmp/Cr9HmXZSIq line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 0 (None)
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing e9409ccbec46ae9075d759c98cac6f993a939fc6
»»»»» Script output:
«timed out after 10 seconds»
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 0 (None)
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 3ed51de3973d1bd46a6f94dad84f30f2d7de41d5
»»»»» Script output:
«timed out after 10 seconds»
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 0 (None)
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing b87a27bfb84353c4ad4ff5d31d64845749b88836
»»»»» Script output:
cannot stringify this
  in sub ztask at /tmp/Cr9HmXZSIq line 1
  in block <unit> at /tmp/Cr9HmXZSIq line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 0 (None)
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
3ed51de3973d1bd46a6f94dad84f30f2d7de41d5 is the first new commit
commit 3ed51de3973d1bd46a6f94dad84f30f2d7de41d5
Author: Jonathan Worthington <jnthn@jnthn.net>
Date:   Wed Sep 21 14:25:24 2016 +0200

    Don't try and concatenate with closure.
    
    Exceptions thrown by the binder come in two forms: strings (thrown
    as adhoc exceptions) or closures that will be invoked to throw a typed
    exception. Don't try and concatenate "in subsignature of parameter X"
    style messages on to that closure.

:040000 040000 83ef01f54b637debd2684b2e29676d0a79499c68 8650e1703c6f9b44c5ae2c4115422bd07275665d M	src