dmesg.log

Initializing cgroup subsys cpuset
Linux version 2.6.27.10-grsec-xxxx-grs-ipv4-64 (root@kernel-64.ovh.net) (gcc version 4.3.2 (Debian 4.3.2-1) ) #7 SMP Wed Sep 9 22:07:04 UTC 2009
Command line: auto BOOT_IMAGE=Linux ro root=801
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007f23b000 (usable)
 BIOS-e820: 000000007f23b000 - 000000007f27d000 (ACPI NVS)
 BIOS-e820: 000000007f27d000 - 000000007f355000 (reserved)
 BIOS-e820: 000000007f355000 - 000000007f365000 (ACPI NVS)
 BIOS-e820: 000000007f365000 - 000000007f3e1000 (reserved)
 BIOS-e820: 000000007f3e1000 - 000000007f3e7000 (ACPI data)
 BIOS-e820: 000000007f3e7000 - 000000007f3e8000 (ACPI NVS)
 BIOS-e820: 000000007f3e8000 - 000000007f3ea000 (ACPI data)
 BIOS-e820: 000000007f3ea000 - 000000007f3ec000 (ACPI NVS)
 BIOS-e820: 000000007f3ec000 - 000000007f3ed000 (reserved)
 BIOS-e820: 000000007f3ed000 - 000000007f3f1000 (ACPI NVS)
 BIOS-e820: 000000007f3f1000 - 000000007f400000 (reserved)
 BIOS-e820: 000000007f400000 - 000000007f600000 (usable)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x7f600 max_arch_pfn = 0x3ffffffff
init_memory_mapping
 0000000000 - 007f600000 page 2M
kernel direct mapping tables up to 7f600000 @ 8000-b000
last_map_addr: 7f600000 end: 7f600000
ACPI: RSDP 000F03F0, 0024 (r2  INTEL)
ACPI: XSDT 7F3E8F10, 0044 (r1  INTEL   DG31PR  6222004 MSFT    10013)
ACPI: FACP 7F3E6D90, 00F4 (r4  INTEL   DG31PR  6222004 MSFT    10013)
ACPI: DSDT 7F3E1010, 4BE9 (r1  INTEL   DG31PR        0 INTL 20051117)
ACPI: FACS 7F3E7F40, 0040
ACPI: APIC 7F3E6F10, 006C (r2  INTEL   DG31PR  6222004 MSFT    10013)
ACPI: HPET 7F3EFD10, 0038 (r1  INTEL ICH7HPET  6222004 AMI.        1)
ACPI: MCFG 7F3EFC10, 003C (r1 INTEL  DG31PR    6222004 MSFT       97)
(5 early reservations) ==> bootmem [0000000000 - 007f600000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 0000e00000]    TEXT DATA BSS ==> [0000200000 - 0000e00000]
  #3 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #4 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
found SMP MP-table at [ffff8800000fc5f0] 000fc5f0
 [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0007f23b
    0: 0x0007f400 -> 0x0007f600
On node 0 totalpages: 521178
  DMA zone: 761 pages, LIFO batch:0
  DMA32 zone: 509091 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
Allocating PCI resources starting at 80000000 (gap: 7f600000:7f71c000)
PERCPU: Allocating 17184 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 509852
Kernel command line: auto BOOT_IMAGE=Linux ro root=801
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 2799.920 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Memory: 2035688k/2086912k available (6828k kernel code, 48328k reserved, 2627k data, 360k init)
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.84 BogoMIPS (lpj=11199680)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080609
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU         E7400  @ 2.80GHz stepping 0a
Using local APIC timer interrupts.
APIC timer calibration result 16666176
Detected 16.666 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5599.82 BogoMIPS (lpj=11199647)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 CPU         E7400  @ 2.80GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (11199.66 BogoMIPS).
net_namespace: 1160 bytes
xor: automatically using best checksumming function: generic_sse
   generic_sse: 10573.000 MB/sec
xor: using function: generic_sse (10573.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 64
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 64
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: updated MCFG configuration 0: base e0000000 segment 0 buses 0 - 31
PCI: Using MMCONFIG at e0000000 - e1ffffff
ACPI: BIOS _OSI(Linux) query ignored
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:02.0 reg 10 32bit mmio: [ff900000, ff97ffff]
PCI: 0000:00:02.0 reg 14 io port: [f140, f147]
PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
PCI: 0000:00:02.0 reg 1c 32bit mmio: [ff700000, ff7fffff]
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [f080, f09f]
PCI: 0000:00:1d.1 reg 20 io port: [f060, f07f]
PCI: 0000:00:1d.2 reg 20 io port: [f040, f05f]
PCI: 0000:00:1d.3 reg 20 io port: [f020, f03f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [ff980000, ff9803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
PCI: 0000:00:1f.1 reg 10 io port: [f130, f137]
PCI: 0000:00:1f.1 reg 14 io port: [f120, f123]
PCI: 0000:00:1f.1 reg 18 io port: [f110, f117]
PCI: 0000:00:1f.1 reg 1c io port: [f100, f103]
PCI: 0000:00:1f.1 reg 20 io port: [f0f0, f0ff]
PCI: 0000:00:1f.2 reg 10 io port: [f0e0, f0e7]
PCI: 0000:00:1f.2 reg 14 io port: [f0d0, f0d3]
PCI: 0000:00:1f.2 reg 18 io port: [f0c0, f0c7]
PCI: 0000:00:1f.2 reg 1c io port: [f0b0, f0b3]
PCI: 0000:00:1f.2 reg 20 io port: [f0a0, f0af]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 20 io port: [f000, f01f]
PCI: 0000:03:00.0 reg 10 io port: [e000, e0ff]
PCI: 0000:03:00.0 reg 18 64bit mmio: [ff820000, ff820fff]
PCI: 0000:03:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: supports D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
PCI: bridge 0000:00:1c.1 io port: [e000, efff]
PCI: bridge 0000:00:1c.1 32bit mmio: [ff800000, ff8fffff]
pci 0000:00:1e.0: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved
system 00:02: ioport range 0x400-0x47f has been reserved
system 00:02: ioport range 0x1180-0x119f has been reserved
system 00:02: ioport range 0x500-0x53f has been reserved
system 00:02: iomem range 0xfec00000-0xfecfffff has been reserved
system 00:02: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:02: iomem range 0xffb00000-0xffcfffff could not be reserved
system 00:02: iomem range 0xfc800000-0xfc800fff has been reserved
system 00:02: iomem range 0xfed20000-0xfed7ffff has been reserved
system 00:02: iomem range 0xffe00000-0xffffffff could not be reserved
system 00:03: ioport range 0x290-0x29f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: disabled
pci 0000:00:01.0:   MEM window: disabled
pci 0000:00:01.0:   PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: 0xe000-0xefff
pci 0000:00:1c.1:   MEM window: 0xff800000-0xff8fffff
pci 0000:00:1c.1:   PREFETCH window: 0x00000080000000-0x000000800fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 mmio: [0, 0]
bus: 01 index 1 mmio: [0, 0]
bus: 01 index 2 mmio: [0, 0]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [0, 0]
bus: 02 index 1 mmio: [0, 0]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [e000, efff]
bus: 03 index 1 mmio: [ff800000, ff8fffff]
bus: 03 index 2 mmio: [80000000, 800fffff]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 mmio: [0, 0]
bus: 04 index 1 mmio: [0, 0]
bus: 04 index 2 mmio: [0, 0]
bus: 04 index 3 io port: [0, ffff]
bus: 04 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
kvm: no hardware support
has_svm: not amd
kvm: no hardware support
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
DLM (built Feb 18 2009 16:28:44) installed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.29 [Flags: R/W].
fuse init (API version 7.9)
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
GFS2 (built Feb 18 2009 16:29:12) installed
Lock_DLM (built Feb 18 2009 16:29:33) installed
msgmni has been set to 3977
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci 0000:00:02.0: Boot video device
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
processor ACPI0007:00: registered as cooling_device0
processor ACPI0007:01: registered as cooling_device1
hpet_resources: 0xfed00000 is busy
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
usbcore: registered new interface driver ub
Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2.5-NAPI
e1000e: Copyright(c) 1999 - 2009 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2
Copyright (c) 2008 Intel Corporation.
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
r8168 Gigabit Ethernet driver 8.010.00 loaded
r8168 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8168 0000:03:00.0: setting latency timer to 64
r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
eth0: Identified chip type is 'RTL8168B/8111B'.
eth0: RTL8168B/8111B at 0xffffc20000022000, 00:1c:c0:f2:14:32, IRQ 764
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01)
pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf0f0-0xf0f7
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
Driver 'sd' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19
ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19
ata1.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
isa bounce pool size: 16 pages
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
Fusion MPT misc device (ioctl) driver 3.04.07
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
slram: not enough parameters.
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, hpet irqs
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
w83627ehf: Found W83627DHG chip at 0x290
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int64x1   2534 MB/s
raid6: int64x2   3428 MB/s
raid6: int64x4   3244 MB/s
raid6: int64x8   2456 MB/s
raid6: sse2x1    4301 MB/s
raid6: sse2x2    5877 MB/s
raid6: sse2x4    8125 MB/s
raid6: using algorithm sse2x4 (8125 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
No iBFT detected.
usbcore: registered new interface driver usbkbd
usbkbd: :USB HID Boot Protocol keyboard driver
usbcore: registered new interface driver usbmouse
usbmouse: v1.6:USB HID Boot Protocol mouse driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
SCTP: Hash tables configured (established 65536 bind 65536)
rtc_cmos 00:05: setting system clock to 2010-11-03 22:15:44 UTC (1288822544)
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 360k freed
EXT3 FS on sda1, internal journal
r8168: eth0: link up
r8168: eth0: link up
grsec: time set by /usr/sbin/ntpdate[ntpdate:1583] uid/euid:0/0 gid/egid:0/0, parent /etc/network/if-up.d/ntpdate[ntpdate:1578] uid/euid:0/0 gid/egid:0/0
vnstatd[2370]: segfault at c ip 0000000000403c49 sp 00007fffa78c66f0 error 4 in vnstatd[400000+f000]
grsec: signal 11 sent to /usr/sbin/vnstatd[vnstatd:2370] uid/euid:0/0 gid/egid:0/0, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0
warning: `proftpd' uses 32-bit capabilities (legacy support in use)