Created
April 25, 2017 10:31
-
-
Save anonymous/715c8f0281b2d07fe46835d404c9c768 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 0.000000] Initializing cgroup subsys cpuset | |
[ 0.000000] Initializing cgroup subsys cpu | |
[ 0.000000] Initializing cgroup subsys cpuacct | |
[ 0.000000] Linux version 3.10.105 (root@hxwong-Vostro-220-Series) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #3 SMP PREEMPT Wed Apr 19 10:05:05 MYT 2017 | |
[ 0.000000] CPU: AArch64 Processor [410fd034] revision 4 | |
[ 0.000000] Machine: sun50iw1p1 | |
[ 0.000000] bootconsole [earlycon0] enabled | |
[ 0.000000] cma: CMA: reserved 384 MiB at 9e400000 | |
[ 0.000000] On node 0 totalpages: 520192 | |
[ 0.000000] DMA zone: 7112 pages used for memmap | |
[ 0.000000] DMA zone: 0 pages reserved | |
[ 0.000000] DMA zone: 520192 pages, LIFO batch:31 | |
[ 0.000000] script_init enter! | |
[ 0.000000] script buffer is NULL! | |
[ 0.000000] psci: probing for conduit method from DT. | |
[ 0.000000] psci: PSCIv0.2 detected in firmware. | |
[ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc07ef92000 s19200 r8192 d21760 u49152 | |
[ 0.000000] pcpu-alloc: s19200 r8192 d21760 u49152 alloc=12*4096 | |
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513080 | |
[ 0.000000] Kernel command line: console=ttyS0,115200n8 enforcing=0 cma=384M no_console_suspend androidboot.serialno=840050344318XXXXXXXX androidboot.hardware=sun50iw1p1 androidboot.selinux=permissive earlyprintk=sunxi-uart,0x01c28000 loglevel=8 root=/dev/mmcblk0p2 eth0_speed=auto | |
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) | |
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) | |
[ 0.000000] Memory: 2032MB = 2032MB total | |
[ 0.000000] Memory: 1632992k/1632992k available, 447776k reserved | |
[ 0.000000] Virtual kernel memory layout: | |
vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB) | |
vmemmap : 0xffffffbc00e38000 - 0xffffffbc02a00000 ( 27 MB) | |
modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) | |
memory : 0xffffffc000000000 - 0xffffffc07f000000 ( 2032 MB) | |
.init : 0xffffffc0009bb000 - 0xffffffc000a3cb00 ( 519 kB) | |
.text : 0xffffffc000080000 - 0xffffffc0009baa74 ( 9451 kB) | |
.data : 0xffffffc000a3d000 - 0xffffffc000ae26c0 ( 662 kB) | |
[ 0.000000] Preemptible hierarchical RCU implementation. | |
[ 0.000000] NR_IRQS:64 nr_irqs:64 0 | |
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt). | |
[ 0.000000] Console: colour dummy device 80x25 | |
[ 0.000000] allocated 8388608 bytes of page_cgroup | |
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups | |
[ 13.665768] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) | |
[ 13.675911] pid_max: default: 32768 minimum: 301 | |
[ 13.680517] Security Framework initialized | |
[ 13.684473] AppArmor: AppArmor initialized | |
[ 13.688478] Mount-cache hash table entries: 256 | |
[ 13.703710] Initializing cgroup subsys memory | |
[ 13.703774] Initializing cgroup subsys devices | |
[ 13.706804] Initializing cgroup subsys freezer | |
[ 13.711166] Initializing cgroup subsys blkio | |
[ 13.715332] Initializing cgroup subsys perf_event | |
[ 13.719942] Initializing cgroup subsys hugetlb | |
[ 13.724352] ftrace: allocating 26720 entries in 105 pages | |
[ 13.761407] CPU0: update cpu_power 1968128 | |
[ 13.761442] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available | |
[ 13.768805] virtual base = 0xffffff800000a000. | |
[ 13.772295] gicd_base = 0xffffff800000c000. | |
[ 13.776438] gicc_base = 0xffffff800000e000. | |
[ 13.781245] CPU1: Booted secondary processor | |
[ 13.781270] CPU1: update cpu_power 1968128 | |
[ 13.783870] CPU2: Booted secondary processor | |
[ 13.783881] CPU2: update cpu_power 1968128 | |
[ 13.787987] CPU3: Booted secondary processor | |
[ 13.787998] CPU3: update cpu_power 1968128 | |
[ 13.788079] Brought up 4 CPUs | |
[ 13.810026] SMP: Total of 4 processors activated (192.00 BogoMIPS). | |
[ 13.816788] devtmpfs: initialized | |
[ 13.824364] atomic64 test passed | |
[ 13.824384] pinctrl core: initialized pinctrl subsystem | |
[ 13.840368] NET: Registered protocol family 16 | |
[ 13.840694] script_sysfs_init success | |
[ 13.843003] dump_class_init,806, success | |
[ 13.846927] vdso: 2 pages (1 code, 1 data) at base ffffffc000a45000 | |
[ 13.852802] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
[ 13.860783] software IO TLB [mem 0xbc800000-0xbcc00000] (4MB) mapped at [ffffffc07b800000-ffffffc07bbfffff] | |
[ 13.869983] DMA: preallocated 256 KiB pool for atomic allocations | |
[ 13.875050] Serial: AMBA PL011 UART driver | |
[ 13.879056] axp81x_board_init: axp regl_devs num = 23 | |
[ 13.884022] pll_audio-set_default_rate=24576000 success! | |
[ 13.889110] pll_video0-set_default_rate=297000000 success! | |
[ 13.894525] pll_video1-set_default_rate=297000000 success! | |
[ 13.899895] pll_de-set_default_rate=297000000 success! | |
[ 13.905589] de-set_default_source=pll_de success! | |
[ 13.909467] de-set_default_rate=297000000 success! | |
[ 13.914205] tcon0-set_default_source=pll_mipi success! | |
[ 13.919215] tcon1-set_default_source=pll_video0 success! | |
[ 13.924615] hdmi-set_default_source=pll_video0 success! | |
[ 13.931800] sun50i-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver | |
[ 13.936418] [sun50iw1p1_pinctrl_probe][838] | |
[ 13.942025] sun50i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver | |
[ 13.947570] sunxi hwspinlock vbase:0xffffff800005c000 | |
[ 13.957163] sunxi_chipid_probe,150: soc bin:0 | |
[ 13.957185] chipid-sunxi serial 000000000000 | |
[ 13.965385] bio: create slab <bio-0> at 0 | |
[ 13.965769] pwm module init! | |
[ 13.968311] SCSI subsystem initialized | |
[ 13.970835] usbcore: registered new interface driver usbfs | |
[ 13.976097] usbcore: registered new interface driver hub | |
[ 13.981351] usbcore: registered new device driver usb | |
[ 13.986946] Linux video capture interface: v2.00 | |
[ 13.991235] [ARISC] :sunxi-arisc driver v1.10 | |
[ 14.002098] [ARISC] :sunxi-arisc driver v1.10 startup succeeded | |
[ 14.002618] Advanced Linux Sound Architecture Driver Initialized. | |
[ 14.008715] NetLabel: Initializing | |
[ 14.011685] NetLabel: domain hash size = 128 | |
[ 14.015932] NetLabel: protocols = UNLABELED CIPSOv4 | |
[ 14.020831] NetLabel: unlabeled traffic allowed by default | |
[ 14.026431] [pm]aw_pm_init! | |
[ 14.029046] rtc physical base = 0x0000000001f00000 . | |
[ 14.033958] np name = /soc@01c00000/rtc@01f00000. | |
[ 14.038628] base = ffffff8000070100, len = 4. | |
[ 14.042882] pmu name: pmu0 . | |
[ 14.045728] pmu0_enable = 0x1. | |
[ 14.048774] pmux_id = 0x6. | |
[ 14.051497] pmux_twi_id = 0x1. | |
[ 14.054565] pmux_twi_addr = 0x34. | |
[ 14.057890] pmu name: pmu1 . | |
[ 14.060758] Warning: can not find np for pmu1. | |
[ 14.065370] add_sys_pwr_dm: get ldo name for id: vcc-lpddr failed | |
[ 14.071362] after inited: sys_mask config = 0x4a55. | |
[ 14.076073] Warning: can not find np for dynamic_standby_para. | |
[ 14.081982] [pm]valid | |
[ 14.084072] [pm]valid | |
[ 14.086289] Notice: sun9i&sun8iw5&sun50i not need support normal standby, change to super standby. | |
[ 14.095683] Switching to clocksource arch_sys_counter | |
[ 14.111987] AppArmor: AppArmor Filesystem Enabled | |
[ 14.119081] NET: Registered protocol family 2 | |
[ 14.119863] TCP established hash table entries: 16384 (order: 6, 262144 bytes) | |
[ 14.125187] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) | |
[ 14.131739] TCP: Hash tables configured (established 16384 bind 16384) | |
[ 14.137861] TCP: reno registered | |
[ 14.140951] UDP hash table entries: 1024 (order: 3, 32768 bytes) | |
[ 14.146861] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) | |
[ 14.153378] NET: Registered protocol family 1 | |
[ 14.157738] RPC: Registered named UNIX socket transport module. | |
[ 14.163204] RPC: Registered udp transport module. | |
[ 14.167795] RPC: Registered tcp transport module. | |
[ 14.172409] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 14.178894] Trying to unpack rootfs image as initramfs... | |
[ 14.184198] rootfs image is not initramfs (junk in compressed archive); looks like an initrd | |
[ 14.222906] Freeing initrd memory: 10632K (ffffffc075450000 - ffffffc075eb2000) | |
[ 14.225183] kvm [1]: HYP mode not available | |
[ 14.230132] lock super standby defaultly! | |
[ 14.232573] lookup_scene_lock_name: new scene lock super_standby | |
[ 14.238475] scene_lock_init name=super_standby | |
[ 14.242802] scene_lock: super_standby, type 5, count 1 | |
[ 14.248290] audit: initializing netlink socket (disabled) | |
[ 14.253162] type=2000 audit(0.530:1): initialized | |
[ 14.258467] HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
[ 14.264401] VFS: Disk quotas dquot_6.5.2 | |
[ 14.267907] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
[ 14.275048] NFS: Registering the id_resolver key type | |
[ 14.279100] Key type id_resolver registered | |
[ 14.283138] Key type id_legacy registered | |
[ 14.287068] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). | |
[ 14.293437] NTFS driver 2.1.30 [Flags: R/W]. | |
[ 14.297666] fuse init (API version 7.22) | |
[ 14.301507] msgmni has been set to 3978 | |
[ 14.305947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) | |
[ 14.312403] io scheduler noop registered | |
[ 14.316142] io scheduler deadline registered | |
[ 14.320352] io scheduler cfq registered (default) | |
[ 14.325906] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI | |
[ 14.330839] sw_console_setup()1173 - console setup baud 115200 parity n bits 8, flow n | |
[ 14.338661] console [ttyS0] enabled, bootconsole disabled | |
[ 14.350474] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI | |
[ 14.362189] misc dump reg init | |
[ 14.365664] [drm] Initialized drm 1.1.0 20060810 | |
[ 14.375314] brd: module loaded | |
[ 14.381075] loop: module loaded | |
[ 14.384789] sunxi-bt bt.26: Missing bt_power. | |
[ 14.389555] sunxi-bt bt.26: bt_power_name ((null)) | |
[ 14.394784] sunxi-bt bt.26: io_regulator_name (vcc-wifi-io) | |
[ 14.400914] sunxi-bt bt.26: bt_rst gpio=356 mul-sel=1 pull=-1 drv_level=-1 data=0 | |
[ 14.409514] sunxi-bt bt.26: clk not config | |
[ 14.414047] sunxi-bt bt.26: block state already is 1 | |
[ 14.419688] sunxi-wlan wlan.25: wlan_busnum (1) | |
[ 14.424631] sunxi-wlan wlan.25: Missing wlan_power. | |
[ 14.429964] sunxi-wlan wlan.25: wlan_power_name ((null)) | |
[ 14.435769] sunxi-wlan wlan.25: io_regulator_name (vcc-wifi-io) | |
[ 14.442246] sunxi-wlan wlan.25: wlan_regon gpio=354 mul-sel=1 pull=-1 drv_level=-1 data=0 | |
[ 14.451576] sunxi-wlan wlan.25: wlan_hostwake gpio=355 mul-sel=6 pull=-1 drv_level=-1 data=0 | |
[ 14.461187] sunxi-wlan wlan.25: clk not config | |
[ 14.466683] tun: Universal TUN/TAP device driver, 1.6 | |
[ 14.472193] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> | |
[ 14.479189] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 14.486447] get ehci0-controller, regulator_io is no nocare | |
[ 14.492759] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000b87b80, 0x:ffffff8000096000, irq_no:68 | |
[ 14.506135] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 14.516035] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1 | |
[ 14.525885] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc0004bee44 | |
[ 14.553056] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00 | |
[ 14.561080] hub 1-0:1.0: USB hub found | |
[ 14.565193] hub 1-0:1.0: 1 port detected | |
[ 14.569614] [ehci0-controller]: sunxi_usb_disable_ehci | |
[ 14.575231] [sunxi-ehci0]: remove, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000b87b80 | |
[ 14.585501] sunxi-ehci 1c1a000.ehci0-controller: remove, state 1 | |
[ 14.592064] usb usb1: USB disconnect, device number 1 | |
[ 14.598253] sunxi-ehci 1c1a000.ehci0-controller: USB bus 1 deregistered | |
[ 14.605729] get ehci1-controller drv_vbus_gpio is fail | |
[ 14.611335] get ehci1-controller, regulator_io is no nocare | |
[ 14.617470] [sunxi-ehci1]: probe, pdev->name: 1c1b000.ehci1-controller, sunxi_ehci: 0xffffffc000b87dd0, 0x:ffffff800009e000, irq_no:6a | |
[ 14.630709] sunxi-ehci 1c1b000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 14.640603] sunxi-ehci 1c1b000.ehci1-controller: new USB bus registered, assigned bus number 1 | |
[ 14.650303] sunxi-ehci 1c1b000.ehci1-controller: irq 106, io mem 0xffffffc0004bee44 | |
[ 14.671135] sunxi-ehci 1c1b000.ehci1-controller: USB 0.0 started, EHCI 1.00 | |
[ 14.678738] ehci_irq: highspeed device connect | |
[ 14.683896] hub 1-0:1.0: USB hub found | |
[ 14.687991] hub 1-0:1.0: 1 port detected | |
[ 14.692580] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 14.699466] get ohci0-controller, regulator_io is no nocare | |
[ 14.705595] hci: request ohci0-controller gpio:1027 | |
[ 14.710931] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000b876e0 | |
[ 14.721268] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver | |
[ 14.730784] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 2 | |
[ 14.740221] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0x00000000 | |
[ 14.803302] hub 2-0:1.0: USB hub found | |
[ 14.807402] hub 2-0:1.0: 1 port detected | |
[ 14.811812] [ohci0-controller]: sunxi_usb_disable_ohci | |
[ 14.817419] [sunxi-ohci0]: remove, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000b876e0 | |
[ 14.827691] sunxi-ohci 1c1a000.ohci0-controller: remove, state 1 | |
[ 14.834263] usb usb2: USB disconnect, device number 1 | |
[ 14.840092] sunxi-ohci 1c1a000.ohci0-controller: USB bus 2 deregistered | |
[ 14.847515] get ohci1-controller drv_vbus_gpio is fail | |
[ 14.853130] get ohci1-controller, regulator_io is no nocare | |
[ 14.859253] [sunxi-ohci1]: probe, pdev->name: 1c1b000.ohci1-controller, sunxi_ohci: 0xffffffc000b87930 | |
[ 14.869452] sunxi-ohci 1c1b000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver | |
[ 14.878966] sunxi-ohci 1c1b000.ohci1-controller: new USB bus registered, assigned bus number 2 | |
[ 14.888419] sunxi-ohci 1c1b000.ohci1-controller: irq 107, io mem 0xff726b6b64622c6a | |
[ 14.950857] hub 2-0:1.0: USB hub found | |
[ 14.954952] hub 2-0:1.0: 1 port detected | |
[ 14.959607] usbcore: registered new interface driver usb-storage | |
[ 14.966188] usbcore: registered new interface driver ums-alauda | |
[ 14.972677] usbcore: registered new interface driver ums-cypress | |
[ 14.979264] usbcore: registered new interface driver ums-datafab | |
[ 14.985828] usbcore: registered new interface driver ums_eneub6250 | |
[ 14.992600] usbcore: registered new interface driver ums-freecom | |
[ 14.999183] usbcore: registered new interface driver ums-isd200 | |
[ 15.005664] usbcore: registered new interface driver ums-jumpshot | |
[ 15.005700] usb 1-1: new high-speed USB device number 2 using sunxi-ehci | |
[ 15.019677] usbcore: registered new interface driver ums-karma | |
[ 15.026083] usbcore: registered new interface driver ums-onetouch | |
[ 15.032764] usbcore: registered new interface driver ums-realtek | |
[ 15.039353] usbcore: registered new interface driver ums-sddr09 | |
[ 15.045842] usbcore: registered new interface driver ums-sddr55 | |
[ 15.052324] usbcore: registered new interface driver ums-usbat | |
[ 15.058803] usbcore: registered new interface driver usbserial | |
[ 15.065205] usbcore: registered new interface driver usbserial_generic | |
[ 15.072345] usbserial: USB Serial support registered for generic | |
[ 15.079139] mousedev: PS/2 mouse device common for all mice | |
[ 15.085676] input: sunxi-keyboard as /devices/virtual/input/input0 | |
[ 15.092957] sunxi-rtc 1f00000.rtc: rtc core: registered rtc-sunxi as rtc0 | |
[ 15.100390] sunxi-rtc 1f00000.rtc: RTC enabled | |
[ 15.105441] i2c /dev entries driver | |
[ 15.144046] input: axp81x-supplyer as /devices/platform/axp81x_board/axp81x-supplyer.47/input/input1 | |
[ 15.157552] sunxi budget cooling probe start ! | |
[ 15.162419] CPU freq cooling register Success | |
[ 15.167262] CPU hotplug cooling register Success | |
[ 15.172446] CPU budget cooling register Success | |
[ 15.177654] sunxi gpu cooling probe start ! | |
[ 15.182268] CPU gpu cooling register Success | |
[ 15.189877] cpuidle: using governor ladder | |
[ 15.194361] cpuidle: using governor menu | |
[ 15.194931] hub 1-1:1.0: USB hub found | |
[ 15.195343] hub 1-1:1.0: 4 ports detected | |
[ 15.207852] sunxi-mmc 1c11000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Apr 19 2017 at 10:02:53 | |
[ 15.220707] sunxi-mmc 1c11000.sdmmc: regulator prop vmmc,str vcc-emmcv | |
[ 15.227844] sunxi-mmc 1c11000.sdmmc: regulator prop vqmmc,str vcc-emmcvq18 | |
[ 15.235357] sunxi-mmc 1c11000.sdmmc: regulator prop vdmmc,str none | |
[ 15.242139] sunxi-mmc 1c11000.sdmmc: No vmmc regulator found | |
[ 15.248314] sunxi-mmc 1c11000.sdmmc: No vqmmc regulator found | |
[ 15.254592] sunxi-mmc 1c11000.sdmmc: No vdmmc regulator found | |
[ 15.261385] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 15.291052] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 15.320601] sunxi-mmc 1c11000.sdmmc: base:0xffffff80000b2000 irq:94 | |
[ 15.327795] sunxi-mmc 1c0f000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Apr 19 2017 at 10:02:53 | |
[ 15.328273] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 52, RTO !! | |
[ 15.329087] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 52, RTO !! | |
[ 15.329104] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 15.331483] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 15.333306] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 8, RTO !! | |
[ 15.334118] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !! | |
[ 15.334927] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !! | |
[ 15.335736] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !! | |
[ 15.336545] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !! | |
[ 15.337360] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !! | |
[ 15.338169] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !! | |
[ 15.338981] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !! | |
[ 15.339793] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !! | |
[ 15.339810] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 15.340154] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B | |
[ 15.340193] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B | |
[ 15.340230] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B | |
[ 15.342610] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B | |
[ 15.380745] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B | |
[ 15.394598] mmc0: BKOPS_EN bit is not set | |
[ 15.508769] sunxi-mmc 1c0f000.sdmmc: regulator prop vmmc,str vcc-sdcv | |
[ 15.515812] sunxi-mmc 1c0f000.sdmmc: regulator prop vqmmc,str vcc-sdcvq33 | |
[ 15.516130] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 8 timing LEGACY(SDR12) dt B | |
[ 15.534631] sunxi-mmc 1c0f000.sdmmc: regulator prop vdmmc,str vcc-sdc | |
[ 15.534954] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 8 timing MMC-HS200 dt B | |
[ 15.534996] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 100000000Hz bm PP pm ON vdd 16 width 8 timing MMC-HS200 dt B | |
[ 15.564008] mmc0: new HS200 MMC card at address 0001 | |
[ 15.564063] sunxi-mmc 1c0f000.sdmmc: No vmmc regulator found | |
[ 15.564067] sunxi-mmc 1c0f000.sdmmc: No vqmmc regulator found | |
[ 15.582201] sunxi-mmc 1c0f000.sdmmc: Got CD GPIO #166. | |
[ 15.587851] mmcblk0: mmc0:0001 NCard 14.4 GiB | |
[ 15.587931] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 15.587951] sunxi-mmc 1c0f000.sdmmc: no vqmmc,Check if there is regulator | |
[ 15.605932] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 15.622748] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB | |
[ 15.629242] sunxi-mmc 1c0f000.sdmmc: base:0xffffff80000ba000 irq:92 | |
[ 15.635820] usb 1-1.1: new low-speed USB device number 3 using sunxi-ehci | |
[ 15.643520] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB | |
[ 15.643906] sunxi-mmc 1c10000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Apr 19 2017 at 10:02:53 | |
[ 15.643926] sunxi-mmc 1c10000.sdmmc: Can't get vmmc regulator string | |
[ 15.643930] sunxi-mmc 1c10000.sdmmc: Can't get vqmmc regulator string | |
[ 15.643935] sunxi-mmc 1c10000.sdmmc: Can't get vdmmc regulator string | |
[ 15.643936] get() with no identifier | |
[ 15.643938] get() with no identifier | |
[ 15.643939] get() with no identifier | |
[ 15.643942] sunxi-mmc 1c10000.sdmmc: No vmmc regulator found | |
[ 15.643946] sunxi-mmc 1c10000.sdmmc: No vqmmc regulator found | |
[ 15.643950] sunxi-mmc 1c10000.sdmmc: No vdmmc regulator found | |
[ 15.714440] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 15.725474] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator | |
[ 15.725490] mmcblk0: p1 p2 | |
[ 15.737479] mmcblk0boot1: unknown partition table | |
[ 15.744378] mmcblk0boot0: unknown partition table | |
[ 15.753534] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 15.783073] sunxi-mmc 1c10000.sdmmc: base:0xffffff80000c2000 irq:93 | |
[ 15.794462] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/soc.0/1c1b000.ehci1-controller/usb1/1-1/1-1.1/1-1.1:1.0/input/input2 | |
[ 15.807305] hid-generic 0003:258A:000C.0001: input: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-sunxi-ehci-1.1/input0 | |
[ 15.836449] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/soc.0/1c1b000.ehci1-controller/usb1/1-1/1-1.1/1-1.1:1.1/input/input3 | |
[ 15.849415] hid-generic 0003:258A:000C.0002: input,hiddev0: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-sunxi-ehci-1.1/input1 | |
[ 15.863166] usbcore: registered new interface driver usbhid | |
[ 15.869276] usb 1-1.3: new high-speed USB device number 4 using sunxi-ehci | |
[ 15.876801] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !! | |
[ 15.876805] usbhid: USB HID core driver | |
[ 15.888299] usbcore: registered new interface driver snd-usb-audio | |
[ 15.888438] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !! | |
[ 15.888460] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 15.890869] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 15.892685] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 8, RTO !! | |
[ 15.893494] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !! | |
[ 15.894298] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !! | |
[ 15.895103] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !! | |
[ 15.895907] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !! | |
[ 15.896717] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !! | |
[ 15.897521] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !! | |
[ 15.898328] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !! | |
[ 15.899133] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !! | |
[ 15.899149] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 15.899980] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 1, RTO !! | |
[ 15.899996] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B | |
[ 16.017989] sunxi-codec-machine sound.6: codec-aif1 <-> 1c22c00.i2s0-controller mapping ok | |
[ 16.027340] sunxi-codec-machine sound.6: codec-aif2 <-> bb-dai mapping ok | |
[ 16.035030] sunxi-codec-machine sound.6: codec-aif2 <-> bb-dai mapping ok | |
[ 16.042711] sunxi-codec-machine sound.6: codec-aif3 <-> bb-dai mapping ok | |
[ 16.051348] input: audiocodec sunxi Audio Jack as /devices/soc.0/sound.6/sound/card0/input4 | |
[ 16.061402] sunxi_daudio 1c22800.daudio: invert clk setting failed | |
[ 16.068684] sndhdmi sound.7: sndhdmi <-> 1c22800.daudio mapping ok | |
[ 16.076346] TCP: cubic registered | |
[ 16.079976] Initializing XFRM netlink socket | |
[ 16.084700] NET: Registered protocol family 10 | |
[ 16.090349] sit: IPv6 over IPv4 tunneling driver | |
[ 16.095759] NET: Registered protocol family 17 | |
[ 16.100674] 8021q: 802.1Q VLAN Support v1.8 | |
[ 16.105284] Key type dns_resolver registered | |
[ 16.110185] Registering SWP/SWPB emulation handler | |
[ 16.115737] registered taskstats version 1 | |
[ 16.121160] Key type encrypted registered | |
[ 16.125540] AppArmor: AppArmor sha1 policy hashing enabled | |
[ 16.132429] sunxi-rtc 1f00000.rtc: setting system clock to 2016-02-16 15:24:14 UTC (1455636254) | |
[ 16.142737] input: sunxi-ths as /devices/virtual/input/input5 | |
[ 16.149170] thermal thermal_zone0: failed to read out thermal zone 0 | |
[ 16.156530] ALSA device list: | |
[ 16.159773] #0: audiocodec | |
[ 16.162911] #1: sndhdmi | |
[ 16.165999] md: Waiting for all devices to be available before autodetect | |
[ 16.173443] md: If you don't use raid, use raid=noautodetect | |
[ 16.180112] md: Autodetecting RAID arrays. | |
[ 16.184580] md: Scanned 0 and added 0 devices. | |
[ 16.189435] md: autorun ... | |
[ 16.192478] md: ... autorun DONE. | |
[ 16.196240] RAMDISK: Couldn't find valid RAM disk image starting at 0. | |
[ 16.226217] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities | |
[ 16.235581] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities | |
[ 16.248754] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) | |
[ 16.257630] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. | |
[ 16.265295] devtmpfs: mounted | |
[ 16.268801] Freeing unused kernel memory: 516K (ffffffc0009bb000 - ffffffc000a3c000) | |
[ 16.467515] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) | |
[ 16.487589] systemd[1]: Detected architecture arm64. | |
[ 16.511718] systemd[1]: Set hostname to <pinebook>. | |
[ 16.794434] systemd[1]: Listening on fsck to fsckd communication Socket. | |
[ 16.826327] systemd[1]: Listening on udev Kernel Socket. | |
[ 16.855679] systemd[1]: Reached target User and Group Name Lookups. | |
[ 16.885334] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
[ 16.915071] systemd[1]: Created slice User and Session Slice. | |
[ 16.944634] systemd[1]: Listening on Journal Socket. | |
[ 16.963954] systemd[1]: Reached target Remote File Systems (Pre). | |
[ 16.993996] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
[ 17.023270] systemd[1]: Created slice System Slice. | |
[ 17.042664] systemd[1]: Reached target Slices. | |
[ 17.064046] systemd[1]: Starting File System Check on Root Device... | |
[ 17.092490] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
[ 17.124477] systemd[1]: Mounting POSIX Message Queue File System... | |
[ 17.152952] systemd[1]: Starting Set console keymap... | |
[ 17.171424] systemd[1]: Created slice system-systemd\x2dfsck.slice. | |
[ 17.202546] systemd[1]: Starting Create list of required static device nodes for the current kernel... | |
[ 17.241389] systemd[1]: Mounting Debug File System... | |
[ 17.269224] systemd[1]: Listening on Syslog Socket. | |
[ 17.288938] systemd[1]: Reached target Remote File Systems. | |
[ 17.318444] systemd[1]: Listening on udev Control Socket. | |
[ 17.349472] systemd[1]: Starting Uncomplicated firewall... | |
[ 17.377538] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
[ 17.409838] systemd[1]: Started Braille Device Support. | |
[ 17.438765] systemd[1]: Starting Nameserver information manager... | |
[ 17.468925] systemd[1]: Starting Load Kernel Modules... | |
[ 17.495502] systemd[1]: Reached target Swap. | |
[ 17.516975] systemd[1]: Mounting Huge Pages File System... | |
[ 17.544669] systemd[1]: Reached target Encrypted Volumes. | |
[ 17.574297] systemd[1]: Listening on Journal Socket (/dev/log). | |
[ 17.605704] systemd[1]: Starting Journal Service... | |
[ 17.628231] systemd[1]: Mounted Debug File System. | |
[ 17.653030] systemd[1]: Mounted Huge Pages File System. | |
[ 17.682834] systemd[1]: Mounted POSIX Message Queue File System. | |
[ 17.712908] systemd[1]: Started File System Check on Root Device. | |
[ 17.743177] systemd[1]: Started Set console keymap. | |
[ 17.762196] systemd[1]: Started Create list of required static device nodes for the current kernel. | |
[ 17.793771] systemd[1]: Started Uncomplicated firewall. | |
[ 17.798137] [DISP]disp_module_init | |
[ 17.798847] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail | |
[ 17.798849] [DISP] boot_disp:0x0 | |
[ 17.799439] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail | |
[ 17.799557] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail | |
[ 17.799674] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail | |
[ 17.813791] [DISP] disp_lcd_set_bright,line:1154:NULL hdl! | |
[ 17.813846] [DISP] disp_lcd_set_bright,line:1154:NULL hdl! | |
[ 17.814757] [DISP] disp_boot_para_parse,line:301:of_property_read disp.fb_base fail | |
[ 17.814758] [DISP] fb_base:0x0 | |
[ 17.904701] systemd[1]: Started Nameserver information manager. | |
[ 17.934073] Console: switching to colour frame buffer device 170x48 | |
[ 17.956556] [DISP]disp_module_init finish | |
[ 17.971025] systemd[1]: Started Journal Service. | |
[ 17.984523] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail | |
[ 17.994155] [DISP] boot_disp:0x0 | |
[ 17.997762] HDMI base address: ffffff8000cc0000 | |
[ 18.003566] [HDMI] power vcc-hdmi-33 | |
[ 18.008254] [HDMI] cec support = 0 | |
[ 18.065991] hci: ERR: sunxi_ehci is disable, can not disable again | |
[ 18.072772] hci: ERR: sunxi_ohci is disable, can not disable again | |
[ 18.079580] [ehci0-controller]: sunxi_usb_enable_ehci | |
[ 18.085101] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000b87b80, 0x:ffffff8000096000, irq_no:68 | |
[ 18.098535] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 18.109844] | |
lcd_edp_tx_rate=2, | |
lcd_edp_tx_lane=1, | |
lcd_edp_colordepth=1, | |
lcd_model_name=2 | |
[ 18.127585] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 3 | |
[ 18.128648] ANX9807 Chip found | |
[ 18.143179] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0x00000000 | |
[ 18.164395] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00 | |
[ 18.173976] hub 3-0:1.0: USB hub found | |
[ 18.178830] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) | |
[ 18.185957] hub 3-0:1.0: 1 port detected | |
[ 18.191870] [ohci0-controller]: sunxi_usb_enable_ohci | |
[ 18.197441] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000b876e0 | |
[ 18.207705] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver | |
[ 18.217274] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 4 | |
[ 18.226738] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0xffffffc0001246e4 | |
[ 18.233731] ..................................clock is detected. | |
[ 18.253403] ..................................clock is stable. | |
[ 18.296838] hub 4-0:1.0: USB hub found | |
[ 18.301028] hub 4-0:1.0: 1 port detected | |
[ 18.420513] ==================bl open | |
[ 18.440382] systemd-journald[154]: Received request to flush runtime journal from PID 1 | |
[ 18.537549] cfg80211: Calling CRDA to update world regulatory domain | |
[ 18.591866] RTL871X: module init start | |
[ 18.596866] RTL871X: rtl8723bs v4.3.16_13854.20150410_BTCOEX20150119-5844 | |
[ 18.607070] RTL871X: build time: Apr 19 2017 10:12:48 | |
[ 18.616027] RTL871X: rtl8723bs BT-Coex version = BTCOEX20150119-5844 | |
[ 18.636186] sunxi-wlan wlan.25: bus_index: 1 | |
[ 18.645140] sunxi-wlan wlan.25: check wlan io_regulator voltage: 3300000 | |
[ 18.764632] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 18.775872] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator | |
[ 18.775883] RTL871X: module init ret=0 | |
[ 18.804061] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 18.844139] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !! | |
[ 18.851666] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !! | |
[ 18.854250] RTL871X: module init start | |
[ 18.854256] RTL871X: rtl8723cs v4.3.22.9_16440.20151221_BTCOEX20151214-0700 | |
[ 18.854258] RTL871X: build time: Apr 19 2017 10:14:55 | |
[ 18.854260] RTL871X: rtl8723cs BT-Coex version = BTCOEX20151214-0700 | |
[ 18.854271] sunxi-wlan wlan.25: bus_index: 1 | |
[ 18.887192] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 18.903703] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
[ 18.918219] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 8, RTO !! | |
[ 18.926163] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 18 width 1 timing LEGACY(SDR12) dt B | |
[ 18.958680] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 18 width 1 timing SD-HS(SDR25) dt B | |
[ 18.972059] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 18 width 1 timing SD-HS(SDR25) dt B | |
[ 18.985933] RTL871X: module init ret=0 | |
[ 18.986160] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 18 width 4 timing SD-HS(SDR25) dt B | |
[ 18.986976] mmc2: new high speed SDIO card at address 0001 | |
[ 18.995469] RTL871X: rtw_read_efuse_from_file open /system/etc/wifi/wifi_efuse_8723cs.map fail, err:-2 | |
[ 18.995476] RTL871X: ERROR invalid phy efuse and read from file fail, will use driver default!! | |
[ 18.995494] RTL871X: rtw_read_macaddr_from_file open /data/misc/wifi/wifimac.txt fail, err:-2 | |
[ 19.014493] mali: no symbol version for sunxi_get_fb_addr_para | |
[ 19.014503] mali: Unknown symbol sunxi_get_fb_addr_para (err -22) | |
[ 19.109713] cfg80211: World regulatory domain updated: | |
[ 19.115376] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) | |
[ 19.115387] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) | |
[ 19.115390] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) | |
[ 19.115393] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) | |
[ 19.115395] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) | |
[ 19.115398] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) | |
[ 19.115400] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) | |
[ 19.115403] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) | |
[ 19.115406] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) | |
[ 19.163148] RTL871X: ERROR invalid mac addr:00:00:00:00:00:00, assign random MAC | |
[ 19.164362] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=00:e0:4c:40:9e:ae | |
[ 19.165355] RTL871X: rtw_ndev_init(pbwlan0) if2 mac_addr=02:e0:4c:40:9e:ae | |
[ 19.231166] sunxi cedar version 0.1 | |
[ 19.231377] [cedar]: install start!!! | |
[ 19.231517] ycy the get irq is 90 | |
[ 19.231935] ycy clk_bass_vir 0x18 is ffffff8002c6e018, the value:3006207 | |
[ 19.231938] ycy clk_bass_vir 0x13c is ffffff8002c6e13c, the value:0 | |
[ 19.231940] ycy clk_bass_vir 0x64 is ffffff8002c6e064, the value:601808 | |
[ 19.231943] ycy clk_bass_vir 0x2c4 is ffffff8002c6e2c4, the value:601c08 | |
[ 19.231945] ycy clk_bass_vir 0x100 is ffffff8002c6e100, the value:0 | |
[ 19.231946] [cedar]: install end!!! | |
[ 19.347105] [VFE]cci probe end cci_sel = 0! | |
[ 19.352129] [VFE]cci_init end | |
[ 19.426506] [VFE]Welcome to Video Front End driver | |
[ 19.426902] [VFE]csi probe end csi_sel = 0! | |
[ 19.427280] [VFE]csi_init end | |
[ 19.427672] [VFE]isp probe start isp_sel = 0! | |
[ 19.432484] [ISP] isp platform_id = 3! | |
[ 19.432510] [VFE]isp probe end isp_sel = 0! | |
[ 19.432621] [VFE]sunxi_isp_platform_register end | |
[ 19.434481] [VFE]mipi probe start mipi_sel = 0! | |
[ 19.434525] [VFE]mipi probe end mipi_sel = 0! | |
[ 19.434628] [VFE]mipi_init end | |
[ 19.434636] [VFE]flash_init end | |
[ 19.435666] [VFE]pdev->id = 0 | |
[ 19.435676] [VFE]dev->vip_sel = 0 | |
[ 19.435702] [VFE_WARN]fetch csi0_dev0_twi_id from device_tree failed | |
[ 19.435734] [VFE_WARN]fetch csi0_dev0_afvdd from device_tree failed | |
[ 19.435741] [VFE_WARN]fetch csi0_dev0_afvdd_vol from device_tree failed | |
[ 19.435750] [VFE_WARN]fetch csi0_dev0_power_en from device_tree failed | |
[ 19.435792] [VFE_WARN]fetch csi0_dev0_flash_en from device_tree failed | |
[ 19.435800] [VFE_WARN]fetch csi0_dev0_flash_mode from device_tree failed | |
[ 19.435812] [VFE_WARN]fetch csi0_dev0_af_pwdn from device_tree failed | |
[ 19.436344] [VFE]vfe_init end | |
[ 19.443865] [VFE]probe_work_handle start! | |
[ 19.444068] [VFE]vfe_runtime_resume | |
[ 19.456090] [VFE]..........................vfe clk open!....................... | |
[ 19.456116] [VFE_WARN]vfe dphy clock is null | |
[ 19.456157] [VFE]v4l2 subdev register input_num = 0 | |
[ 19.456360] [VFE]vfe sensor detect start! input_num = 0 | |
[ 19.456375] [VFE_WARN]NOT found this item: bf3703, you can add this sensor in the sensor_list_t! | |
[ 19.456381] [VFE]Sub device register "bf3703" i2c_addr = 0x3e start! | |
[ 19.456388] [VFE_ERR]Error registering v4l2 subdevice No such device! | |
[ 19.466165] [VFE_ERR]vfe sensor register check error at input_num = 0 | |
[ 19.476367] [VFE]V4L2 device registered as (null) | |
[ 19.476444] [VFE]vfe_runtime_suspend | |
[ 19.476450] [VFE]..........................vfe clk close!....................... | |
[ 19.484143] [VFE]probe_work_handle end! | |
[ 19.584303] sunxi-bt bt.26: set block: 0 | |
[ 19.584474] sunxi-bt bt.26: check bluetooth io_regulator voltage: 3300000 | |
[ 20.452940] zram: module is from the staging directory, the quality is unknown, you have been warned. | |
[ 20.458532] zram: Created 4 device(s) ... | |
[ 20.671860] Adding 254668k swap on /dev/zram0. Priority:5 extents:1 across:254668k SS | |
[ 20.690159] Adding 254668k swap on /dev/zram1. Priority:5 extents:1 across:254668k SS | |
[ 20.707541] Adding 254668k swap on /dev/zram2. Priority:5 extents:1 across:254668k SS | |
[ 20.731238] Adding 254668k swap on /dev/zram3. Priority:5 extents:1 across:254668k SS | |
[ 21.097513] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (090c:037c) | |
[ 21.099301] input: USB 2.0 PC Cam as /devices/soc.0/1c1b000.ehci1-controller/usb1/1-1/1-1.3/1-1.3:1.0/input/input6 | |
[ 21.099916] usbcore: registered new interface driver uvcvideo | |
[ 21.099928] USB Video Class driver (1.1.1) | |
[ 21.419964] ------------[ cut here ]------------ | |
[ 21.420007] WARNING: at drivers/clk/clk.c:781 __clk_disable+0x40/0x78() | |
[ 21.420012] Modules linked in: uvcvideo videobuf2_vmalloc zram(C) vfe_v4l2 videobuf2_dma_contig vfe_io videobuf2_memops videobuf2_core ss cedar_ve 8723cs 8723bs cfg80211 hdmi disp | |
[ 21.420058] CPU: 1 PID: 571 Comm: alsactl Tainted: G C O 3.10.105 #3 | |
[ 21.420064] Call trace: | |
[ 21.422770] [<ffffffc000088388>] dump_backtrace+0x0/0x118 | |
[ 21.422784] [<ffffffc0000884c4>] show_stack+0x24/0x30 | |
[ 21.422796] [<ffffffc0006eebac>] dump_stack+0x20/0x28 | |
[ 21.422806] [<ffffffc0000addc8>] warn_slowpath_common+0x80/0xa8 | |
[ 21.422812] [<ffffffc0000adf2c>] warn_slowpath_null+0x3c/0x4c | |
[ 21.422822] [<ffffffc000574270>] __clk_disable+0x40/0x78 | |
[ 21.422830] [<ffffffc0005742d0>] clk_disable+0x28/0x3c | |
[ 21.422839] [<ffffffc0005cf3dc>] set_src_function+0x100/0x190 | |
[ 21.422849] [<ffffffc000588900>] snd_ctl_elem_write+0xd4/0x148 | |
[ 21.422856] [<ffffffc000589098>] snd_ctl_ioctl+0x3b4/0x708 | |
[ 21.422866] [<ffffffc0001c0dd4>] vfs_ioctl+0x4c/0x6c | |
[ 21.422872] [<ffffffc0001c175c>] do_vfs_ioctl+0x4a4/0x538 | |
[ 21.422878] [<ffffffc0001c1858>] SyS_ioctl+0x68/0x98 | |
[ 21.422885] ---[ end trace 6b98ac0b1956f48b ]--- | |
[ 21.423406] ------------[ cut here ]------------ | |
[ 21.423429] WARNING: at drivers/clk/clk.c:690 __clk_unprepare+0x34/0x84() | |
[ 21.423434] Modules linked in: uvcvideo videobuf2_vmalloc zram(C) vfe_v4l2 videobuf2_dma_contig vfe_io videobuf2_memops videobuf2_core ss cedar_ve 8723cs 8723bs cfg80211 hdmi disp | |
[ 21.423478] CPU: 1 PID: 571 Comm: alsactl Tainted: G WC O 3.10.105 #3 | |
[ 21.423484] Call trace: | |
[ 21.426192] [<ffffffc000088388>] dump_backtrace+0x0/0x118 | |
[ 21.426206] [<ffffffc0000884c4>] show_stack+0x24/0x30 | |
[ 21.426217] [<ffffffc0006eebac>] dump_stack+0x20/0x28 | |
[ 21.426226] [<ffffffc0000addc8>] warn_slowpath_common+0x80/0xa8 | |
[ 21.426232] [<ffffffc0000adf2c>] warn_slowpath_null+0x3c/0x4c | |
[ 21.426238] [<ffffffc000574d28>] __clk_unprepare+0x34/0x84 | |
[ 21.426244] [<ffffffc000574d9c>] clk_unprepare+0x24/0x34 | |
[ 21.426253] [<ffffffc0005cf3e4>] set_src_function+0x108/0x190 | |
[ 21.426263] [<ffffffc000588900>] snd_ctl_elem_write+0xd4/0x148 | |
[ 21.426269] [<ffffffc000589098>] snd_ctl_ioctl+0x3b4/0x708 | |
[ 21.426278] [<ffffffc0001c0dd4>] vfs_ioctl+0x4c/0x6c | |
[ 21.426284] [<ffffffc0001c175c>] do_vfs_ioctl+0x4a4/0x538 | |
[ 21.426290] [<ffffffc0001c1858>] SyS_ioctl+0x68/0x98 | |
[ 21.426296] ---[ end trace 6b98ac0b1956f48c ]--- | |
[ 22.715690] [DISP] disp_ioctl,line:1558:para err in disp_ioctl, cmd = 0x0,screen id = 65536 | |
[ 22.739649] mali: no symbol version for sunxi_get_fb_addr_para | |
[ 22.739670] mali: Unknown symbol sunxi_get_fb_addr_para (err -22) | |
[ 22.974857] IPv6: ADDRCONF(NETDEV_UP): pbwlan0: link is not ready | |
[ 23.581864] sunxi-bt bt.26: block state already is 0 | |
[ 24.136844] sunxi-bt bt.26: block state already is 0 | |
[ 24.171765] Bluetooth: Core ver 2.16 | |
[ 24.171872] NET: Registered protocol family 31 | |
[ 24.171878] Bluetooth: HCI device and connection manager initialized | |
[ 24.171921] Bluetooth: HCI socket layer initialized | |
[ 24.171930] Bluetooth: L2CAP socket layer initialized | |
[ 24.171949] Bluetooth: SCO socket layer initialized | |
[ 24.200446] Bluetooth: HCI UART driver ver 2.2 | |
[ 24.200462] Bluetooth: HCI H4 protocol initialized | |
[ 24.200466] Bluetooth: HCI BCSP protocol initialized | |
[ 24.200470] Bluetooth: HCILL protocol initialized | |
[ 24.200474] Bluetooth: HCIATH3K protocol initialized | |
[ 24.200478] Bluetooth: HCI Three-wire UART (H5) protocol initialized | |
[ 24.466262] Bluetooth: Non-link packet received in non-active state | |
[ 24.679363] Bluetooth: Non-link packet received in non-active state | |
[ 24.688724] Bluetooth: Out-of-order packet arrived (1 != 0) | |
[ 24.918580] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
[ 24.918595] Bluetooth: BNEP filters: protocol multicast | |
[ 24.918636] Bluetooth: BNEP socket layer initialized | |
[ 27.003648] RTL871X: nolinked power save enter | |
[ 47.771221] RTL871X: nolinked power save leave | |
[ 49.831190] RTL871X: nolinked power save enter | |
[ 80.251353] RTL871X: nolinked power save leave | |
[ 82.312331] RTL871X: nolinked power save enter | |
[ 122.620092] RTL871X: nolinked power save leave | |
[ 124.681030] RTL871X: nolinked power save enter | |
[ 174.749589] RTL871X: nolinked power save leave | |
[ 176.810311] RTL871X: nolinked power save enter | |
[ 236.746428] RTL871X: nolinked power save leave | |
[ 238.809184] RTL871X: nolinked power save enter | |
[ 248.045842] raw_flag value is 1 | |
[ 248.052465] raw_flag value is 1 | |
[ 248.066702] raw_flag value is 1 | |
[ 248.521171] Bluetooth: RFCOMM TTY layer initialized | |
[ 248.521261] Bluetooth: RFCOMM socket layer initialized | |
[ 248.521268] Bluetooth: RFCOMM ver 1.11 | |
[ 255.499125] sunxi-bt bt.26: block state already is 0 | |
[ 284.105322] RTL871X: nolinked power save leave | |
[ 285.395457] RTL871X: rtw_set_802_11_connect(pbwlan0) fw_state=0x00000008 | |
[ 285.455884] RTL871X: start auth | |
[ 285.458617] RTL871X: auth success, start assoc | |
[ 285.463576] RTL871X: assoc success | |
[ 285.463795] IPv6: ADDRCONF(NETDEV_CHANGE): pbwlan0: link becomes ready | |
[ 285.468005] RTL871X: port switch - port0(pbwlan0), port1(wlan0) |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment