On LuaRadio it input IQ file and output ax25.

iqfile_ax25.lua

-- 2019/02/03(Sun.) written by takurx
-- It was modified to input IQ file from luaradio/examples/rtlsdr_ax25.lua
-- ThrottleBlock was added. It need to run on real-time.
-- Reference
-- Ref 1. http://luaradio.io/examples/iqfile-converter.html
-- Ref 2. http://luaradio.io/docs/reference-manual.html#throttleblock
-- Ref 3. http://luaradio.io/docs/reference-manual.html#radioax25framerblock

local radio = require('radio')

if #arg < 1 then
    io.stderr:write("Usage: " .. arg[0] .. " <frequency> <iqfile path>\n")
    os.exit(1)
end

local frequency = tonumber(arg[1])
-- local tune_offset = -100e3
local tune_offset = 0
local baudrate = 1200

-- Blocks
-- local source = radio.RtlSdrSource(frequency + tune_offset, 1000000)
local source = radio.IQFileSource('/home/chino/Desktop/181208_aprs_iqdata.bin', 'f32le', 1e6, true)
local throttle = radio.ThrottleBlock()
local tuner = radio.TunerBlock(tune_offset, 12e3, 80)
local nbfm_demod = radio.NBFMDemodulator(3e3, 3e3)
local hilbert = radio.HilbertTransformBlock(129)
local translator = radio.FrequencyTranslatorBlock(-1700)
local afsk_filter = radio.LowpassFilterBlock(128, 750)
local afsk_demod = radio.FrequencyDiscriminatorBlock(1.25)
local data_filter = radio.LowpassFilterBlock(128, baudrate)
local clock_recoverer = radio.ZeroCrossingClockRecoveryBlock(baudrate)
local sampler = radio.SamplerBlock()
local bit_slicer = radio.SlicerBlock()
local bit_decoder = radio.DifferentialDecoderBlock(true)
local framer = radio.AX25FramerBlock()
local sink = radio.JSONSink()

-- Plotting sinks
local plot1 = radio.GnuplotSpectrumSink(2048, 'RF Spectrum', {yrange = {-120, -60}})
local plot2 = radio.GnuplotPlotSink(2048, 'Demodulated Bitstream', {yrange = {-0.15, 0.15}})

-- Connections
local top = radio.CompositeBlock()
top:connect(source, throttle, tuner, nbfm_demod)
top:connect(nbfm_demod, hilbert, translator, afsk_filter, afsk_demod, data_filter, clock_recoverer)
top:connect(data_filter, 'out', sampler, 'data')
top:connect(clock_recoverer, 'out', sampler, 'clock')
top:connect(sampler, bit_slicer, bit_decoder, framer)
top:connect(framer, sink)
if os.getenv('DISPLAY') then
    top:connect(tuner, plot1)
    top:connect(data_filter, plot2)
end

top:run()