Denver Dias DenverDias

## dotPeriod
#define dotPeriod 100

## Floating dotPeriod
#define dotPeriod (analogRead(2))

## Defining a dah
void dah()
{
  tone(tonePin, buzz);
  delay(dahPeriod);
  noTone(tonePin);
  delay(relaxtime);
}

## Defining a di
void di()
{
	dit();
}

## otherPeriods
#define dashPeriod (dotPeriod*3)
#define relaxTime (dotPeriod)
#define letterSpace (dotPeriod*2)
#define wordSpace (dotPeriod*4)

## buzz frequency and output pin
#define buzz 1000
#define tonePin 3

## Global scope variables
int Index=0, endofstring, i;
//This creates dummy variables to index letters

char Input[255];
//This is required to store the input data temporarily

## Morse loop()
void loop()
{
	while(!Serial.available());
//This command makes it wait until the Serial data is sent
	while(Serial.available())
	{
		Input[Index]=Serial.read();
//Stores the byte of data from the serial buffer
		Serial.print(Input[Index]);
//Prints out the same data

## Floating buzz output frequency
#define buzz (analogRead(1)+200)

## Defining a dit
void dit()
{
  tone(tonePin, buzz);
  delay(dotPeriod);
  noTone(tonePin);
  delay(relaxtime);
}
	void dah()
	{
	tone(tonePin, buzz);
	delay(dahPeriod);
	noTone(tonePin);
	delay(relaxtime);
	}
	#define dashPeriod (dotPeriod*3)
	#define relaxTime (dotPeriod)
	#define letterSpace (dotPeriod*2)
	#define wordSpace (dotPeriod*4)
	int Index=0, endofstring, i;
	//This creates dummy variables to index letters

	char Input[255];
	//This is required to store the input data temporarily
	void loop()
	{
	while(!Serial.available());
	//This command makes it wait until the Serial data is sent
	while(Serial.available())
	{
	Input[Index]=Serial.read();
	//Stores the byte of data from the serial buffer
	Serial.print(Input[Index]);
	//Prints out the same data
	void dit()
	{
	tone(tonePin, buzz);
	delay(dotPeriod);
	noTone(tonePin);
	delay(relaxtime);
	}