This is a fairly common question, and there isn't a One True Answer.
These are the most common techniques:
This is a quick-and-dirty guide to setting up a Raspberry Pi as a "router on a stick" to ExpressVPN.
This is adapted from SuperJamie's gist.
I used a Raspberry Pi 3 - seems like the extra speed may be useful for running VPN.
Ignore this if you have not encountered any issue with the installation and running of ModelSim and Quartus on your system. You are very lucky. (Just Kidding! You have surely had this issue, only sorted.)
Hence assuming you have been following the procedure given in this guide. Most certainly, Quartus will install jsut fine, and so will ModelSim. The issue is in launching due to inappropriate linking etc.
This is the simplest error you would encounter. Navigate to the modelsim_ase
folder and run:
# this code is based on get_historical_data() from python-binance module | |
# https://github.com/sammchardy/python-binance | |
# it also requires pybybit.py available from this page | |
# https://note.mu/mtkn1/n/n9ef3460e4085 | |
# (where pandas & websocket-client are needed) | |
import time | |
import dateparser | |
import pytz | |
import json |