Gigadoc2

## dbusmenu.py
# dmenu wrapper around dbus menues
#
# Example Usage:
# python3 dbusmenu.py org.freedesktop.network-manager-applet /org/ayatana/NotificationItem/nm_applet/Menu
#
# https://github.com/tetzank/qmenu_hud/blob/master/com.canonical.dbusmenu.xml

import subprocess
import sys
import time

## Unbrick_Buffalo_WZR-HP-G300NH.md

      
              1 file
            
          
              4 forks
            
          
              16 comments
            
          
              7 stars
            
          
                pjobson
                / Unbrick_Buffalo_WZR-HP-G300NH.md
            
            
              Last active
              May 7, 2023 07:14
            
              
                How to Unbrick the Buffalo WZR-HP-G300NH
              
          
    Unbricking a Buffalo WZR-HP-G300NH

TFTP recovery in OSX 10.13

Similar steps can be used under Linux, I have no idea how to Windows anymore. This will probably work for similar Buffalo WZR routers, though your milage may vary.  These directions flash the router back to stock Buffalo branded DDWRT.
When these routers brick they tend to go into a kind of reboot mode.  At the begining of the reboot, the TFTP server is available for a brief period of time, then all of the lights flash and the unit reboots.  We're exploiting the short period of time where the router is in TFTP mode at the start of the reboot.  You can try to do a put via TFTP at the begining of this cycle, even if your router has been plugged in for awhile.
Back to Stock Buffalo Branded DDWRT


## reclaimWindows10.ps1
###
###
### UPDATE: For Win 11, I recommend using this tool in place of this script:
### https://christitus.com/windows-tool/
### https://github.com/ChrisTitusTech/winutil
### https://www.youtube.com/watch?v=6UQZ5oQg8XA
### iwr -useb https://christitus.com/win | iex
###
###

## compton.conf
# This is my compton configuration after a quick cleanup.  (It's still none too organized; sorry about that.)
#   With this file at ~/.config/compton.conf, I can run compton without any arguments (just plain `compton`).
#
# In the hopes that explaining my software and hardware environment might be helpful to you:
#
# I use this configuration  on Ubuntu 15.10 (and have used it on previous releases); I am currently using the 352.63 ("long-lived
#   branch") NVIDIA binary drivers, installed from the Ubuntu software repositories.  I use fluxbox as my window manager; most of
#   the other components of my desktop environment are borrowed from Xfce.
#
# My workstation at home has an i7-4930K and a GTX 970 in it, which are together more than enough to drive several 4K displays
	# dmenu wrapper around dbus menues
	#
	# Example Usage:
	# python3 dbusmenu.py org.freedesktop.network-manager-applet /org/ayatana/NotificationItem/nm_applet/Menu
	#
	# https://github.com/tetzank/qmenu_hud/blob/master/com.canonical.dbusmenu.xml

	import subprocess
	import sys
	import time
	###
	###
	### UPDATE: For Win 11, I recommend using this tool in place of this script:
	### https://christitus.com/windows-tool/
	### https://github.com/ChrisTitusTech/winutil
	### https://www.youtube.com/watch?v=6UQZ5oQg8XA
	### iwr -useb https://christitus.com/win \| iex
	###
	###
	# This is my compton configuration after a quick cleanup. (It's still none too organized; sorry about that.)
	# With this file at ~/.config/compton.conf, I can run compton without any arguments (just plain `compton`).
	#
	# In the hopes that explaining my software and hardware environment might be helpful to you:
	#
	# I use this configuration on Ubuntu 15.10 (and have used it on previous releases); I am currently using the 352.63 ("long-lived
	# branch") NVIDIA binary drivers, installed from the Ubuntu software repositories. I use fluxbox as my window manager; most of
	# the other components of my desktop environment are borrowed from Xfce.
	#
	# My workstation at home has an i7-4930K and a GTX 970 in it, which are together more than enough to drive several 4K displays