Storio

gistfile1.txt

iROM v3 Entry A400-S160 MHz

SPI Boot...(ID: 0x00) Fail
Nand Boot...NF_NON_SHARE->Fail
SDC/eMMC Boot...cmd SD_STATUS = 0x304
cmd SD_STATUS = 0x304
BootWell BtHdr ID:0
cmd SD_STATUS = 0x1304
cmd SD_STATUS = 0x1304
0x92004000 = 0x00000952
0x92004008 = 0x08000010
0x9200400C = 0x0000030D
0x92004010 = 0x080B1833
0x92004014 = 0x4D832000
0x9200401C = 0x04080432
0x92004024 = 0x00660044
0x92004028 = 0x28282F2F
0x92005010 = 0x00000403
delay:512 Loop ...Finished
0x90005004 = 0xEC722E83
0x9000505C = 0x073232B4
0x90005104 = 0x1F800003
0x920050A0 = 0x00000098
0x93007004 = 0x41993A18
0x93007044 = 0x0500012D
0x9300E2B8 = 0x002E0200
0x9301F020 = 0x00000C02
0x9301F02C = 0x00000003
0x9301F038 = 0x00000FFF
delay:1 ms ...Finished
BootWell BtLdr ID:0


VERSION2013
###### eMMC_BL1 (Jul 17 2013 11:08:47) ######
pBoardVersion(0xB1007F78) = 0xB4B4B4B4, pBootFlag(0xB1007F7C) = 0xA55A7887
Cmd = 0x1008, SD_STATUS = 0x304
Cmd = 0x1037, SD_STATUS = 0x1304
Cmd = 0x3001, SD_STATUS = 0x1304
###### sd card 1 no insert, or init failed! ######
Cmd = 0x1008, SD_STATUS = 0x1304
Cmd = 0x1037, SD_STATUS = 0x1304
Cmd = 0x7007, SD_STATUS = 0x1304
Cmd = 0x7007, SD_STATUS = 0x1304
Set SD0 Clock: 10  MHz
Cmd = 0x7007, SD_STATUS = 0x1304
###### sd card 0 passed! ######
Cmd = 0x7007, SD_STATUS = 0x1304
Cmd = 0x7007, SD_STATUS = 0x1304
version: 1, 3, 5, 0
Load FastBin, part num:5, start:34049(sector), size:60(sector),
Cmd = 0x7007, SD_STATUS = 0x1304
Load FastImageHeader, part num:15, start:63901, size:1, (sector)
Cmd = 0x7007, SD_STATUS = 0x1304
###### eMMC fast image header tag not match! addr=63901 ######
LD: part_num=1, run_addr=0x00100000, start=257(sector), size=512(sector)
Cmd = 0x7007, SD_STATUS = 0x1304
Jump to eMMC_LD Code, Addr=0x00100000




###### eMMC_LD VERSION: (Apr 24 2014 11:11:29) ######
pBoardVersion(0xB1007F78) = 0xB4B4B4B4, pBootFlag(0xB1007F7C) = 0xA55A7887
voltage=06.06
Set SDC Clock: 10  MHz
DISPLAY BUFFER = 0x07E00000, (kernel)
voltage=06.91
set PWM duty = 0
rtc (0x00) = 5
rtc (0x02) = A3
get rtc alarm second value = 0
alarm value false, set value = 32
voltage=06.89
logo: start=34201, size=2208 (sector), buffer=0x07E80000
set PWM duty = 75
bright:75
audio: start=36409, size=864 (sector), buffer=0x07F94000
voltage=06.85
interval=45, frame=22, clk_div=1, fps=41, ms_pf=48
audio_start_num=8
Earphone remove
volume:9
voltage=06.82
send i2c dummy clk
*0x90005144 = 0x00000001
*0x90005080 = 0x00C0A22A
*0x9000A024 = 0xFFFFFFD7
*0x90005110 = 0x3FEB0000
*0x90005118 = 0x3FEB00FF
*0x9000511c = 0x03EB0000
*0x90005114 = 0x00030000
KERNEL: part_num=3, run_addr=0x01000000, start=1281(sector), size=16384(sector)
Jump to Kernel Code, Addr=0x01000000


hi board
hi serial  [2]
goodbye serial  [2]


U-Boot 2010.06 (Apr 18 2011 - 13:23:01) for GPL32900

DRAM:  32 MiB
NAND:  secnum=[0] address=[208000] offset=[78] len=[2f8de0]
secnum=[1] address=[a00000] offset=[2f8e58] len=[33b093]
secnum=[2] address=[200100] offset=[633eeb] len=[10c]
Good parse ==jump to [208000]
good wait jump
[    0.000000] Linux version 2.6.32.94 (vicsiu@hk-linux) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #26 PREEMPT Wed Oct 22 09:51:10 HKT 2014
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387f
[    0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: GPL32900
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] SRAM: Mapped pa 0xb0000000 to va 0xfc900000 size: 0x100000
[    0.000000] SRAM: Mapped pa 0xb2000000 to va 0xfcb00000 size: 0x100000
[    0.000000] SRAM: Mapped pa 0xb1000000 to va 0xfca00000 size: 0x100000
[    0.000000] SRAM: Mapped va 0xfc900000 size: 0x4000
[    0.000000] [gpHalPeriClokcCheck]Keep SCUA enable clock:[0x0]
[    0.000000] [gpHalPeriClokcCheck]Keep SCUB enable clock:[0x0]
[    0.000000] [gpHalPeriClokcCheck]Keep SCUC enable clock:[0x0]
[    0.000000] [gpHalPeriClokcCheck]Keep SCUA2 enable clock:[0x26000000]
[    0.000000] [xtal] parrent = NULL , rate=27000000 Hz, usage=0
[    0.000000] [apll] parrent = NULL , rate=73728000 Hz, usage=0
[    0.000000] [spll] parrent = NULL , rate=640000000 Hz, usage=0
[    0.000000] [spll2] parrent = NULL , rate=720000000 Hz, usage=0
[    0.000000] [clk_ref_arm] parrent = spll2 , rate=360000000 Hz, usage=0
[    0.000000] [clk_arm] parrent = clk_ref_arm , rate=360000000 Hz, usage=0
[    0.000000] [clk_arm_ahb] parrent = clk_arm , rate=180000000 Hz, usage=0
[    0.000000] [clk_arm_apb] parrent = clk_arm_ahb , rate=90000000 Hz, usage=0
[    0.000000] [clk_ref_ceva] parrent = spll , rate=320000000 Hz, usage=0
[    0.000000] [clk_ceva] parrent = clk_ref_ceva , rate=160000000 Hz, usage=0
[    0.000000] [clk_ceva_ahb] parrent = clk_ceva , rate=160000000 Hz, usage=0
[    0.000000] [clk_ceva_apb] parrent = clk_ceva_ahb , rate=80000000 Hz, usage=0
[    0.000000] [clk_sys] parrent = clk_ref_ceva , rate=160000000 Hz, usage=0
[    0.000000] [clk_sys_ahb] parrent = clk_sys , rate=160000000 Hz, usage=0
[    0.000000] [clk_sys_apb] parrent = clk_sys_ahb , rate=80000000 Hz, usage=0
[    0.000000] [clk_lcd] parrent = clk_ref_ceva , rate=27000000 Hz, usage=0
[    0.000000] [clk_uart] parrent = clk_ref_ceva , rate=27000000 Hz, usage=0
[    0.000000] [clk_csi] parrent = clk_ref_ceva , rate=106666666 Hz, usage=0
[    0.000000] [clk_i2s_mclk] parrent = apll , rate=3072000 Hz, usage=0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 22860
[    0.000000] Kernel command line: console=ttyS0,115200
[    0.000000]  mem=92160K         gp_chunkmem.membase=0x05A00000 gp_chunkmem.memsize=0x02600000  vtechBootHint=XXXXXXXX vtechBootDev=eMMC     vtechBootRel=rel vtechBootPara=@WIFI,                            initrd=0x00a00000,0x0033b093
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 90MB = 90MB total
[    0.000000] Memory: 83196KB available (2744K code, 698K data, 92K init, 0K highmem)
[    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:64
[    0.000000] GPL32900 system timer init, PCLK(arm_apb)[90000000]Prescaler[89]LDR[10000]
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Calibrating delay loop... 359.62 BogoMIPS (lpj=1798144)
[    0.210000] Mount-cache hash table entries: 512
[    0.210000] CPU: Testing write buffer coherency: ok
[    0.210000] NET: Registered protocol family 16
[    0.210000] [gpl32900_devinit][810] run
[    0.210000] [gp_init_pm][272] run
[    0.210000] Enabling FIQ
[    0.220000] bio: create slab <bio-0> at 0
[    0.220000] SCSI subsystem initialized
[    0.230000] NET: Registered protocol family 2
[    0.230000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.230000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.230000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.230000] TCP: Hash tables configured (established 4096 bind 4096)
[    0.230000] TCP reno registered
[    0.230000] NET: Registered protocol family 1
[    0.230000] Unpacking initramfs...
[    1.890000] Freeing initrd memory: 3308K
[    1.890000] [chunkmem] pbase=05A00000 vbase=C7000000 size=02600000
[    1.890000] [chunkmem] addr:05A01000  size:025FE020  ---
[    1.890000] system bytes = 02600000 (39845888)
[    1.890000] in use bytes = 00001FE0 (8160)
[    1.890000] max chunk    = 025FE020 (39837728)
[    1.890000]
[    1.890000] gp-uart.0: ttyS0 at MMIO 0x0 (irq = 58) is a UARTC2
[    1.900000] console [ttyS0] enabled
[    1.900000] gp-uart.1: ttyS1 at MMIO 0x0 (irq = 56) is a UARTC0
[    1.910000] board dev minor : 59
[    1.910000]  Gpfb!! module loaded
[    1.920000] ashmem: initialized
[    1.940000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.950000] msgmni has been set to 169
[    1.970000] alg: No test for stdrng (krng)
[    1.980000] io scheduler noop registered
[    1.980000] io scheduler cfq registered (default)
[    2.010000] loop: module loaded
[    2.020000] mice: PS/2 mouse device common for all mice
[    2.020000] cpuidle: using governor ladder
[    2.030000] sdhci: Secure Digital Host Controller Interface driver
[    2.030000] sdhci: Copyright(c) Pierre Ossman
[    2.040000] logger: created 64K log 'log_main'
[    2.040000] logger: created 256K log 'log_events'
[    2.050000] logger: created 64K log 'log_radio'
[    2.050000] logger: created 64K log 'log_system'
[    2.060000] TCP cubic registered
[    2.060000] NET: Registered protocol family 17
[    2.070000] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    2.080000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    2.090000] Freeing init memory: 92K
starting pid 23, tty '': '/init.rc'

Openplatform Revision:8642
Kernel Revision:8642
Build time:Oct 22 2014 13:10:34
IOD26: 0
IOD27: 1
Install Module:gp_apbdma0_module
------> sysinit: insmod gp_apbdma0_module.ko
Install Module:gp_i2c_bus_module
------> sysinit: insmod gp_i2c_bus_module.ko
filename : 69,/lib/modules/2.6.32.94/kernel/arch/arm/mach-gpl32900/mcu_em78p372n.ko
options  : 7,dummy=1
Install Module:/lib/modules/2.6.32.94/kernel/arch/arm/mach-gpl32900/mcu_em78p372n.ko
------> sysinit: insmod mcu_em78p372n.ko dummy=1
Install Module:gp_timer_module
[    3.640000] tc probe ok
[    3.650000] tc probe ok
[    3.660000] tc probe ok
[    3.670000] tc probe ok
------> sysinit: insmod gp_timer_module.ko
filename : 13,gp_pwm_module
options  : 19,config=1 freq=10000
Install Module:gp_pwm_module
[    3.840000] gp_pwm: freq=10000
------> sysinit: insmod gp_pwm_module.ko config=1 freq=10000
Install Module:gp_adc_module
------> sysinit: insmod gp_adc_module.ko
filename : 28,/lib/modules/board_config.ko
options  : 15,config=2 init=0
Install Module:/lib/modules/board_config.ko
[    4.040000] board_init!
[    4.060000] pwm probe ok
[    4.080000] pwm probe ok
------> sysinit: insmod board_config.ko config=2 init=0
Install Module:gp_display
[    4.250000] disp dev minor : 38
------> sysinit: insmod gp_display.ko
filename : 41,/lib/modules/common/lcd_kd_50g2650tba1.ko
options  : 6,init=0
Install Module:/lib/modules/common/lcd_kd_50g2650tba1.ko
[    4.300000] [panel_init:412]
[    4.300000] [register_paneldev:1276], type=0, name=LCD_KD_50G2650TBA1
------> [    4.360000] [kd_50g2650tba1_init:209]
sysinit: insmod lcd_kd_50g2650tba1.ko init=0
------> sysinit: error - open "/etc/disp/DISPGAM.BIN" failed!
------> sysinit: error - open "/etc/disp/COLOR.BIN" failed!
Install Module:gp_fb
[    4.430000] fb0: gp-fb frame buffer device
------> sysinit: insmod gp_fb.ko
filename : 85,/lib/modules/2.6.32.94/kernel/arch/arm/mach-gpl32900/vtech_lcd_ctrl/vtech_lcd_ctrl.ko
options  : 15,config=1 init=1
Install Module:/lib/modules/2.6.32.94/kernel/arch/arm/mach-gpl32900/vtech_lcd_ctrl/vtech_lcd_ctrl.ko
[    4.490000] ###### vtech_lcd_ctrl: lcd_ctrl_init() ######
[    4.500000] ###### vtech_lcd_ctrl: hdir: ch=1, pin=5, func=0, gid=8, index=0x1000805 ######
[    4.500000] ###### vtech_lcd_ctrl: vdir: ch=1, pin=3, func=0, gid=8, index=0x1000803 ######
[    4.520000] ##### register_disp_irq_func(): SEQ:1 ARG=1 #####
[    4.520000] ###### vtech_lcd_ctrl: change lcd_position NORMAL ######
[    4.520000] ##### disp_irq(): DO FLIP, SEQ:1 ARG=1 #####
[    4.560000] ###### vtech_lcd_ctrl: lcd_ctrl_init() successful ######
------> sysinit: insmod vtech_lcd_ctrl.ko config=1 init=1
=======================================
>>>Main Unit: 1588 (Deluxe)
[    5.610000] ### eMMC 4-bit high speed mode
[    5.610000] ### eMMC speed = 0x190 (40 MHz)
[    5.630000]  sdcarda: sdcarda1 sdcarda2 < sdcarda5 sdcarda6 sdcarda7 sdcarda8 sdcarda9 sdcarda10 sdcarda11 sdcarda12 sdcarda13 > sdcarda3
export BOOTDEV_PART_IFSD=/dev/sdcarda1
export BOOTDEV_PART_APPA=/dev/sdcarda3
export BOOTDEV_PART_ULOG=/dev/sdcarda5
export BOOTDEV_PART_SB1=/dev/sdcarda6
export BOOTDEV_PART_SB2=/dev/sdcarda7
export BOOTDEV_PART_BUND=/dev/sdcarda8
export BOOTDEV_PART_SWAP=/dev/sdcarda9
export BOOTDEV_PART_WLM=/dev/sdcarda10
export BOOTDEV_PART_IF=/dev/sdcarda11
export BOOTDEV_PART_IDLG=/dev/sdcarda12
export BOOTDEV_PART_INET=/dev/sdcarda13
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcarda6, SEQNUM=326, vtechBootDev=eMMC
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcarda9, SEQNUM=329, vtechBootDev=eMMC
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcarda3, SEQNUM=324, vtechBootDev=eMMC
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcarda, SEQNUM=321, vtechBootDev=eMMC
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcarda13, SEQNUM=333, vtechBootDev=eMMC
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcarda12, SEQNUM=332, vtechBootDev=eMMC
export USB_PID_VERSION=0
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcarda10, SEQNUM=330, vtechBootDev=eMMC
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcarda11, SEQNUM=331, vtechBootDev=eMMC
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcarda1, SEQNUM=322, vtechBootDev=eMMC
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcarda7, SEQNUM=327, vtechBootDev=eMMC
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcarda5, SEQNUM=325, vtechBootDev=eMMC
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcarda2, SEQNUM=323, vtechBootDev=eMMC
sdcarda3: Do not mount any partition before snapshot!
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcarda8, SEQNUM=328, vtechBootDev=eMMC
sdcarda6: Do not mount any partition before snapshot!
sdcarda10: Do not mount any partition before snapshot!
sdcarda: Do not mount any partition before snapshot!
sdcarda13: Do not mount any partition before snapshot!
sdcarda9: Do not mount any partition before snapshot!
UCountryLang=FRfre
sdcarda11: Do not mount any partition before snapshot!
sdcarda12: Do not mount any partition before snapshot!
sdcarda2: Do not mount any partition before snapshot!
sdcarda8: Do not mount any partition before snapshot!
sdcarda1: Do not mount any partition before snapshot!
sdcarda7: Do not mount any partition before snapshot!
sdcarda5: Do not mount any partition before snapshot!
Change to orientation landscape
[    8.780000] ##### register_disp_irq_func(): SEQ:2 ARG=1 #####
wait eMMC to up...
Loading: command line parameter: picture = '/sbin/Upgrading-Firmware-FRfre-Landscape.bmp'
Loading: command line parameter: PWM value = 50
Loading: command line parameter: Show Time = 60000ms
IO_Initialize(): Board Version is EV7.
[    8.870000] ###### vtech_lcd_ctrl: change lcd_position NORMAL ######
[    8.870000] ##### disp_irq(): DO FLIP, SEQ:2 ARG=1 #####
[    8.920000] ===App device init eMMC enter!!===
[    8.920000] ===App driver version:V0.1.0===
System_Part_Select: command line parameter: boot mode = SD
SDApp_ReadHeader(): App Header Version              : 0x00000010
SDApp_ReadHeader(): App Header Total Size           : 0x0001B99D
SDApp_ReadHeader(): App Header Number of Partitions : 0x00000010
SDApp_ReadHeader(): App Header CheckSum             : 0x00000000
System_Part_Select: Version 1 is valid (version 40)
System_Part_Select: Version 2 is valid (version 39)
System_Part_Select: Version 1 is selected:
  Version : v40
  LD_1    : v50
  LD_2    : v42
  Kernel_1: v50
  Kernel_2: v42
  FastBL_1: v50
  FastBL_2: v42
  System_1: v50
  System_2: v42
eMMC: select SB1 at /dev/sdcarda6
[    9.160000] SQUASHFS error: zlib_inflate error, data probably corrupt
[    9.170000] SQUASHFS error: squashfs_read_data failed to read block 0x19d30e2
[    9.180000] SQUASHFS error: Unable to read metadata cache entry [19d30e2]
[    9.180000] SQUASHFS error: Unable to read inode 0x60060a7b
[    9.190000] ------------[ cut here ]------------
[    9.190000] WARNING: at fs/inode.c:712 unlock_new_inode+0x24/0x40()
[    9.200000] Modules linked in: emmc_app gp_sd vtech_lcd_ctrl gp_fb lcd_kd_50g2650tba1 gp_display board_config gp_adc_module gp_pwm_module gp_timer_module mcu_em78p372n gp_i2c_bus_module gp_apbdma0_module
[    9.220000] [<c0224f54>] (unwind_backtrace+0x0/0xd0) from [<c0240b04>] (warn_slowpath_common+0x48/0x60)
[    9.230000] [<c0240b04>] (warn_slowpath_common+0x48/0x60) from [<c02b06a0>] (unlock_new_inode+0x24/0x40)
[    9.240000] [<c02b06a0>] (unlock_new_inode+0x24/0x40) from [<c02b2914>] (iget_failed+0x14/0x20)
[    9.250000] [<c02b2914>] (iget_failed+0x14/0x20) from [<c02e8ccc>] (squashfs_fill_super+0x3ac/0x4d0)
[    9.260000] [<c02e8ccc>] (squashfs_fill_super+0x3ac/0x4d0) from [<c02a0114>] (get_sb_bdev+0x110/0x16c)
[    9.260000] [<c02a0114>] (get_sb_bdev+0x110/0x16c) from [<c02e8878>] (squashfs_get_sb+0x18/0x20)
[    9.270000] [<c02e8878>] (squashfs_get_sb+0x18/0x20) from [<c029edac>] (vfs_kern_mount+0x4c/0xd4)
[    9.280000] [<c029edac>] (vfs_kern_mount+0x4c/0xd4) from [<c029ee78>] (do_kern_mount+0x34/0xd8)
[    9.290000] [<c029ee78>] (do_kern_mount+0x34/0xd8) from [<c02b668c>] (do_mount+0x6e0/0x74c)
[    9.300000] [<c02b668c>] (do_mount+0x6e0/0x74c) from [<c02b677c>] (sys_mount+0x84/0xc4)
[    9.310000] [<c02b677c>] (sys_mount+0x84/0xc4) from [<c02200a0>] (ret_fast_syscall+0x0/0x2c)
[    9.320000] ---[ end trace b34bd1ed6eaa560a ]---
mount: mounting /dev/sdcarda6 on /system failed: Input/output error
[    9.350000] SQUASHFS error: zlib_inflate error, data probably corrupt
[    9.360000] SQUASHFS error: squashfs_read_data failed to read block 0x19d30e2
[    9.370000] SQUASHFS error: Unable to read metadata cache entry [19d30e2]
[    9.370000] SQUASHFS error: Unable to read inode 0x60060a7b
[    9.380000] ------------[ cut here ]------------
[    9.380000] WARNING: at fs/inode.c:712 unlock_new_inode+0x24/0x40()
[    9.390000] Modules linked in: emmc_app gp_sd vtech_lcd_ctrl gp_fb lcd_kd_50g2650tba1 gp_display board_config gp_adc_module gp_pwm_module gp_timer_module mcu_em78p372n gp_i2c_bus_module gp_apbdma0_module
[    9.410000] [<c0224f54>] (unwind_backtrace+0x0/0xd0) from [<c0240b04>] (warn_slowpath_common+0x48/0x60)
[    9.420000] [<c0240b04>] (warn_slowpath_common+0x48/0x60) from [<c02b06a0>] (unlock_new_inode+0x24/0x40)
[    9.430000] [<c02b06a0>] (unlock_new_inode+0x24/0x40) from [<c02b2914>] (iget_failed+0x14/0x20)
[    9.440000] [<c02b2914>] (iget_failed+0x14/0x20) from [<c02e8ccc>] (squashfs_fill_super+0x3ac/0x4d0)
[    9.440000] [<c02e8ccc>] (squashfs_fill_super+0x3ac/0x4d0) from [<c02a0114>] (get_sb_bdev+0x110/0x16c)
[    9.450000] [<c02a0114>] (get_sb_bdev+0x110/0x16c) from [<c02e8878>] (squashfs_get_sb+0x18/0x20)
[    9.460000] [<c02e8878>] (squashfs_get_sb+0x18/0x20) from [<c029edac>] (vfs_kern_mount+0x4c/0xd4)
[    9.470000] [<c029edac>] (vfs_kern_mount+0x4c/0xd4) from [<c029ee78>] (do_kern_mount+0x34/0xd8)
[    9.480000] [<c029ee78>] (do_kern_mount+0x34/0xd8) from [<c02b668c>] (do_mount+0x6e0/0x74c)
[    9.490000] [<c02b668c>] (do_mount+0x6e0/0x74c) from [<c02b677c>] (sys_mount+0x84/0xc4)
[    9.500000] [<c02b677c>] (sys_mount+0x84/0xc4) from [<c02200a0>] (ret_fast_syscall+0x0/0x2c)
[    9.510000] ---[ end trace b34bd1ed6eaa560b ]---
mount: mounting /dev/sdcarda6 on /system failed: Input/output error
[    9.540000] SQUASHFS error: zlib_inflate error, data probably corrupt
[    9.550000] SQUASHFS error: squashfs_read_data failed to read block 0x19d30e2
[    9.550000] SQUASHFS error: Unable to read metadata cache entry [19d30e2]
[    9.560000] SQUASHFS error: Unable to read inode 0x60060a7b
[    9.570000] ------------[ cut here ]------------
[    9.570000] WARNING: at fs/inode.c:712 unlock_new_inode+0x24/0x40()
[    9.580000] Modules linked in: emmc_app gp_sd vtech_lcd_ctrl gp_fb lcd_kd_50g2650tba1 gp_display board_config gp_adc_module gp_pwm_module gp_timer_module mcu_em78p372n gp_i2c_bus_module gp_apbdma0_module
[    9.600000] [<c0224f54>] (unwind_backtrace+0x0/0xd0) from [<c0240b04>] (warn_slowpath_common+0x48/0x60)
[    9.610000] [<c0240b04>] (warn_slowpath_common+0x48/0x60) from [<c02b06a0>] (unlock_new_inode+0x24/0x40)
[    9.620000] [<c02b06a0>] (unlock_new_inode+0x24/0x40) from [<c02b2914>] (iget_failed+0x14/0x20)
[    9.620000] [<c02b2914>] (iget_failed+0x14/0x20) from [<c02e8ccc>] (squashfs_fill_super+0x3ac/0x4d0)
[    9.630000] [<c02e8ccc>] (squashfs_fill_super+0x3ac/0x4d0) from [<c02a0114>] (get_sb_bdev+0x110/0x16c)
[    9.640000] [<c02a0114>] (get_sb_bdev+0x110/0x16c) from [<c02e8878>] (squashfs_get_sb+0x18/0x20)
[    9.650000] [<c02e8878>] (squashfs_get_sb+0x18/0x20) from [<c029edac>] (vfs_kern_mount+0x4c/0xd4)
[    9.660000] [<c029edac>] (vfs_kern_mount+0x4c/0xd4) from [<c029ee78>] (do_kern_mount+0x34/0xd8)
[    9.670000] [<c029ee78>] (do_kern_mount+0x34/0xd8) from [<c02b668c>] (do_mount+0x6e0/0x74c)
[    9.680000] [<c02b668c>] (do_mount+0x6e0/0x74c) from [<c02b677c>] (sys_mount+0x84/0xc4)
[    9.690000] [<c02b677c>] (sys_mount+0x84/0xc4) from [<c02200a0>] (ret_fast_syscall+0x0/0x2c)
[    9.690000] ---[ end trace b34bd1ed6eaa560c ]---
mount: mounting /dev/sdcarda6 on /system failed: Input/output error
Failed to mount system.bin at /dev/sdcarda6...
starting pid 256, tty '': '/._.'