Lzok

Note

The following commands were tested in MacOS. Not yet in Linux.

Delete branches locally

Delete all local branches except master, development and the current branch (in this example). You can add as many branches as you want in the regex.

cd into-the-desired-repo
git branch | egrep -v "(master|development|\*)" | xargs git branch -D

Lzok

#!/usr/bin/env python3

"""
=============== DISCLAIMER ===================
The original library (blinkt) belongs to Pimoroni Company.
https://github.com/pimoroni/blinkt.

I just adapted some examples to meet my needs.

=============== END DISCLAIMER ===============

Lzok

This guide is updated to date 2020-06-27

I use UEFI mode, LVM to manage the volumes and LUKS to encrypt the LVM volumes. Also I install the system with the Ethernet cable plugged in.

First commands before begin the "actual" work.

Check if my network interface is listed and enabled ip link

Lzok

[build/install]
sudo apt update && sudo apt upgrade
sudo apt install dkms
sudo -i
echo "blacklist r8188eu" > "/etc/modprobe.d/realtek.conf"
exit
git clone https://github.com/aircrack-ng/rtl8188eus
cd rtl8188eus
sudo ./dkms-install.sh

Lzok

sudo apt purge ubuntu-report popularity-contest apport whoopsie apport-symptoms\
&& sudo apt-mark hold ubuntu-report popularity-contest apport whoopsie apport-symptoms

Lzok

06-02-2021 I am working in a Windows 10 machine and I noticed I can't work with VirtualBox and WSL together. This is mostly due to Hyper-V.

After some research, the solution I found is quite uncomfortable.

If you want to use WSL, you will need to execute the following in an administrator promp (and reboot):

bcdedit /set hypervisorlaunchtype auto

DISM /Online /Enable-Feature /All /FeatureName:Microsoft-Hyper-Vi

Lzok

Install pyenv (Arch Linux) and add the paths to $PATH variable

sudo pacman -S pyenv

echo 'export PATH="$HOME/.pyenv/bin:$PATH"' >> ~/.bashrc && 
echo 'eval "$(pyenv init -)"' >> ~/.bashrc && 
echo 'eval "$(pyenv virtualenv-init -)"' >> ~/.bashrc &&
echo 'PATH=$(pyenv root)/shims:$PATH' >> ~/.bashrc

Lzok

check your swap

free

turn off swap

sudo swapoff /swapfile

To create the SWAP file, you will need to use this.

sudo fallocate -l 4G /swapfile # same as "sudo dd if=/dev/zero of=/swapfile bs=1G count=4"

Secure swap.

Lzok

sudo nano /etc/X11/xorg.conf.d/30-touchpad.conf

Section "InputClass"
    Identifier "touchpad"
    Driver "libinput"
    MatchIsTouchpad "on"
 Option "Tapping" "on"

Lzok

# LDAC codecs
sudo pacman -S libldac

# From AUR
paru -S pulseaudio-modules-bt