drmalex07

README

Create a template service file at /etc/systemd/system/secure-tunnel@.service. The template parameter will correspond to the name of target host:

[Unit]
Description=Setup a secure tunnel to %I
After=network.target

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

gbaman

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

romainl

The right way to override any highlighting if you don't want to edit the colorscheme file directly

Generalities first

Suppose you have weird taste and you absolutely want:

• your visual selection to always have a green background and black foreground,
• your active statusline to always have a white background and red foreground,
• your very own deep blue background.

williballenthin

radare2

load without any analysis (file header at offset 0x0): r2 -n /path/to/file

• analyze all: aa
• show sections: iS
• list functions: afl
• list imports: ii
• list entrypoints: ie
• seek to function: s sym.main

MicahElliott

#! /usr/bin/env python

""" Convert values between RGB hex codes and xterm-256 color codes.

Nice long listing of all 256 colors and their codes. Useful for
developing console color themes, or even script output schemes.

Resources:
* http://en.wikipedia.org/wiki/8-bit_color
* http://en.wikipedia.org/wiki/ANSI_escape_code

justinian

x64 NASM cheat sheet

Registers

	64 bit	32 bit	16 bit	8 bit
A (accumulator)	RAX	EAX	AX	AL
B (base, addressing)	RBX	EBX	BX	BL
C (counter, iterations)	RCX	ECX	CX	CL
D (data)	RDX	EDX	DX	DL

spion

Warning

This benchmark has been misleading for a while. It was originally made to demonstrate how JIT compilers can do all sorts of crazy stuff to your code - especially LuaJIT - and was meant to be a starting point of discussion about what exactly LuaJIT does and how.

As a result, its not indicative of what its performance may be on more realistic data. Differences can be expected because

1. the text will not consist of hard-coded constants

jkomyno

// Convert a struct sockaddr address to a string, IPv4 and IPv6:

char *get_ip_str(const struct sockaddr *sa, char *s, size_t maxlen)
{
    switch(sa->sa_family) {
        case AF_INET:
            inet_ntop(AF_INET, &(((struct sockaddr_in *)sa)->sin_addr),
                    s, maxlen);
            break;

yohhoy

/*
 * C11 <threads.h> emulation library
 *
 * (C) Copyright yohhoy 2012.
 * Distributed under the Boost Software License, Version 1.0.
 * (See copy at http://www.boost.org/LICENSE_1_0.txt)
 */
#ifndef EMULATED_THREADS_H_INCLUDED_
#define EMULATED_THREADS_H_INCLUDED_