This is currently incomplete! I did not document all the IOS changes I've done.
I have a 2008 Nintendo Wii, which will have a 2 GB SD (not SDHC) card that holds ProjectM and Homebrew software, and a 32 GB USB flash drive housing my purchased ripped games on the bottom-most USB port. This guide will assume both flash devices are newly formatted with the SD card being FAT16 and FAT32 for the USB drive.
| name: Parallel Poetry Discovery | |
| on: | |
| push: {branches-ignore: ["**"]} | |
| env: | |
| COMMENT_PFX: "# RPOOLEY " | |
| jobs: |
I'm running TrueNAS-SCALE-23.10.0.1 on an old Supermicro motherboard in a Genesys S208B-TWIN-ITX-12G chassis. This chassis has hot swappable 3.5" SAS drive bays oriented in two rows of four drives. My storage drives are connected through an LSI Broadcom SAS 9300-8i HBA. My HBA does not support the LOCATE feature, so I cannot blink LEDs to locate hard drives to replace.
In order to quickly associate which hard drive in TrueNAS corresponds to what physical slot it is stored in I wrote a script. This script uses the description column of TrueNAS's Storage Disks table to label what slot a particular drive is installed in. One caveat with this script is I must run it after every reboot or after I install/remove a hard drive, so running sudo slots is now at the beginning of my disk repalcement workflows.
Copy slots.sh (attached below) to /usr/local/sbin/slots and then run sudo chmod +x /usr/local/sbin/slots. Afterward you will be able to use the tool anywhere by running `sudo