SaraM92

import RPi.GPIO as GPIO                  
import time
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BCM)                    
TRIG = 17
ECHO = 27
in1=16
in2=12
in3=21
in4=20

SaraM92

import RPi.GPIO as GPIO
import time

GPIO.setmode(GPIO.BCM)
GPIO.setwarnings(False)

trig = 23
echo = 24
led = 14
GPIO.setup(echo, GPIO.IN)

SaraM92

import RPi.GPIO as GPIO
import time

GPIO.setmode(GPIO.BCM)
GPIO.setwarnings(False)

 
trig = 23
echo = 24
GPIO.setup(echo, GPIO.IN)

SaraM92

import RPi.GPIO as GPIO
import time

GPIO.setmode(GPIO.BCM)
GPIO.setwarnings(False)
GPIO.setup(18,GPIO.OUT)
while True:
    GPIO.output(18,GPIO.HIGH)
    print("LED is ON")
    time.sleep(1)

SaraM92

# set up device
rigetti = AwsDevice("arn:aws:braket:us-west-1::device/qpu/rigetti/Aspen-M-2")

# create a clean circuit with no result type attached.(This is because some result types are only supported when shots=0)
bell = Circuit().h(0).cnot(0, 1)  

# add the Z \otimes Z expectation value
bell.expectation(Observable.Z() @ Observable.Z(), target=[0,1])

# run circuit 

SaraM92

# print all (the usual suspects) available gates currently available within SDK
gate_set = [attr for attr in dir(Gate) if attr[0] in string.ascii_uppercase]
print('Gate set supported by SDK:\n', gate_set)
print('\n') 

# the Rigetti device
device = AwsDevice('arn:aws:braket:us-west-1::device/qpu/rigetti/Aspen-M-2')
supported_gates = device.properties.action['braket.ir.jaqcd.program'].supportedOperations
# print the supported gate set
print('Gate set supported by the Rigetti device:\n', supported_gates)

SaraM92

#Import needed libraries
import pennylane as qml
from pennylane import numpy as np

dev = qml.device("default.qubit", wires=2, shots=100)

#Create circuit
@qml.qnode(dev)
def circuit():
    qml.Hadamard(wires=0)

SaraM92

#Import needed libraries
import strangeworks
import strangeworks.cirq
import cirq

#Define needed qubits 
q0 = cirq.NamedQubit('q0')
q1 = cirq.NamedQubit('q1')

#Create circuit

SaraM92

# general imports
import numpy as np
import matplotlib.pyplot as plt
# magic word for producing visualizations in notebook
%matplotlib inline
import string
import time

# AWS imports: Import Braket SDK modules
from braket.circuits import Circuit, Gate, Instruction, circuit, Observable

SaraM92

#Import needed libraries
from qiskit import QuantumRegister, ClassicalRegister
from qiskit import QuantumCircuit, execute

#Define the qubits and classical bit
q = QuantumRegister(2,'q')
c = ClassicalRegister(2,'c')

#Create a circuit
circuit = QuantumCircuit(q,c)