bisectable6

query

https://gist.githubusercontent.com/samcv/0df9fcc0c119f5ada443aefbee6f24d7/raw/3837f01efecd6318c08b30d6df2884d4b86808de/concat.t

result

Bisecting: 1855 revisions left to test after this (roughly 11 steps)
[957b5273034fc85250c11566b8a3370b3c403dc8] Bump NQP revision to require version with better-O logic.
»»»»» Testing 957b5273034fc85250c11566b8a3370b3c403dc8
»»»»» Script output:
ok 1 - 
ok 2 - 
ok 3 - 
ok 4 - 
ok 5 - 
ok 6 - 
ok 7 - 
ok 8 - 
ok 9 - 
ok 10 - 
ok 11 - 
ok 12 - 
ok 13 - 
ok 14 - 
ok 15 - 
ok 16 - 
ok 17 - 
ok 18 - 
ok 19 - 
ok 20 - 
ok 21 - 
ok 22 - 
ok 23 - 
ok 24 - 
ok 25 - 
ok 26 - 
ok 27 - 
ok 28 - 
ok 29 - 
ok 30 - 
ok 31 - 
ok 32 - 
ok 33 - 
ok 34 - 
ok 35 - 
ok 36 - 
ok 37 - 
ok 38 - 
ok 39 - 
ok 40 - 
ok 41 - 
ok 42 - 
ok 43 - 
ok 44 - 
ok 45 - 
ok 46 - 
ok 47 - 
ok 48 - 
ok 49 - 
ok 50 - 
ok 51 - 
ok 52 - 
ok 53 - 
ok 54 - 
ok 55 - 
ok 56 - 
ok 57 - 
ok 58 - 
ok 59 - 
ok 60 - 
ok 61 - 
ok 62 - 
ok 63 - 
ok 64 - 
ok 65 - 
ok 66 - 
ok 67 - 
ok 68 - 
ok 69 - 
ok 70 - 
ok 71 - 
ok 72 - 
ok 73 - 
ok 74 - 
ok 75 - 
ok 76 - 
ok 77 - 
ok 78 - 
ok 79 - 
ok 80 - 
ok 81 - 
ok 82 - 
ok 83 - 
ok 84 - 
ok 85 - 
ok 86 - 
ok 87 - 
ok 88 - 
ok 89 - 
ok 90 - 
ok 91 - 
ok 92 - 
ok 93 - 
ok 94 - 
ok 95 - 
ok 96 - 
ok 97 - 
ok 98 - 
ok 99 - 
ok 100 - 
ok 101 - 
ok 102 - 
ok 103 - 
ok 104 - 
ok 105 - 
ok 106 - 
ok 107 - 
ok 108 - 
ok 109 - 
ok 110 - 
ok 111 …
»»»»» (output was trimmed  because it is too large)
»»»»» Script exit code: 0
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 67d3b69263f2c714ed7a0f2fd8be08197cfabefd
»»»»» Script output:
ok 1 - 
ok 2 - 
ok 3 - 
ok 4 - 
ok 5 - 
ok 6 - 
ok 7 - 
ok 8 - 
ok 9 - 
ok 10 - 
ok 11 - 
ok 12 - 
ok 13 - 
ok 14 - 
ok 15 - 
ok 16 - 
ok 17 - 
ok 18 - 
ok 19 - 
ok 20 - 
ok 21 - 
ok 22 - 
ok 23 - 
ok 24 - 
ok 25 - 
ok 26 - 
ok 27 - 
ok 28 - 
ok 29 - 
ok 30 - 
ok 31 - 
ok 32 - 
ok 33 - 
ok 34 - 
ok 35 - 
ok 36 - 
ok 37 - 
ok 38 - 
ok 39 - 
ok 40 - 
ok 41 - 
ok 42 - 
ok 43 - 
ok 44 - 
ok 45 - 
ok 46 - 
ok 47 - 
ok 48 - 
ok 49 - 
ok 50 - 
ok 51 - 
ok 52 - 
ok 53 - 
ok 54 - 
ok 55 - 
ok 56 - 
ok 57 - 
ok 58 - 
ok 59 - 
ok 60 - 
ok 61 - 
ok 62 - 
ok 63 - 
ok 64 - 
ok 65 - 
ok 66 - 
ok 67 - 
ok 68 - 
ok 69 - 
ok 70 - 
ok 71 - 
ok 72 - 
ok 73 - 
ok 74 - 
ok 75 - 
ok 76 - 
ok 77 - 
ok 78 - 
ok 79 - 
ok 80 - 
ok 81 - 
ok 82 - 
ok 83 - 
ok 84 - 
ok 85 - 
ok 86 - 
ok 87 - 
ok 88 - 
ok 89 - 
ok 90 - 
ok 91 - 
ok 92 - 
ok 93 - 
ok 94 - 
ok 95 - 
ok 96 - 
ok 97 - 
ok 98 - 
ok 99 - 
ok 100 - 
ok 101 - 
ok 102 - 
ok 103 - 
ok 104 - 
ok 105 - 
ok 106 - 
ok 107 - 
ok 108 - 
ok 109 - 
ok 110 - 
ok 111 …
»»»»» (output was trimmed  because it is too large)
»»»»» Script exit code: 0
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing d740258702321435b205a937d9ed8910a7c396d5
»»»»» Script output:
ok 1 - 
ok 2 - 
ok 3 - 
ok 4 - 
ok 5 - 
ok 6 - 
ok 7 - 
ok 8 - 
ok 9 - 
ok 10 - 
ok 11 - 
ok 12 - 
ok 13 - 
ok 14 - 
ok 15 - 
ok 16 - 
ok 17 - 
ok 18 - 
ok 19 - 
ok 20 - 
ok 21 - 
ok 22 - 
ok 23 - 
ok 24 - 
ok 25 - 
ok 26 - 
ok 27 - 
ok 28 - 
ok 29 - 
ok 30 - 
ok 31 - 
ok 32 - 
ok 33 - 
ok 34 - 
ok 35 - 
ok 36 - 
ok 37 - 
ok 38 - 
ok 39 - 
ok 40 - 
ok 41 - 
ok 42 - 
ok 43 - 
ok 44 - 
ok 45 - 
ok 46 - 
ok 47 - 
ok 48 - 
ok 49 - 
ok 50 - 
ok 51 - 
ok 52 - 
ok 53 - 
ok 54 - 
ok 55 - 
ok 56 - 
ok 57 - 
ok 58 - 
ok 59 - 
ok 60 - 
ok 61 - 
ok 62 - 
ok 63 - 
ok 64 - 
ok 65 - 
ok 66 - 
ok 67 - 
ok 68 - 
ok 69 - 
ok 70 - 
ok 71 - 
ok 72 - 
ok 73 - 
ok 74 - 
ok 75 - 
ok 76 - 
ok 77 - 
ok 78 - 
ok 79 - 
ok 80 - 
ok 81 - 
ok 82 - 
ok 83 - 
ok 84 - 
ok 85 - 
ok 86 - 
ok 87 - 
ok 88 - 
ok 89 - 
ok 90 - 
ok 91 - 
ok 92 - 
ok 93 - 
ok 94 - 
ok 95 - 
ok 96 - 
ok 97 - 
ok 98 - 
ok 99 - 
ok 100 - 
ok 101 - 
ok 102 - 
ok 103 - 
ok 104 - 
ok 105 - 
ok 106 - 
ok 107 - 
ok 108 - 
ok 109 - 
ok 110 - 
ok 111 …
»»»»» (output was trimmed  because it is too large)
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 87036f74a4c3e62fe0116d02f9f9490a9c8ca63a
»»»»» Script output:
ok 1 - 
ok 2 - 
ok 3 - 
ok 4 - 
ok 5 - 
ok 6 - 
ok 7 - 
ok 8 - 
ok 9 - 
ok 10 - 
ok 11 - 
ok 12 - 
ok 13 - 
ok 14 - 
ok 15 - 
ok 16 - 
ok 17 - 
ok 18 - 
ok 19 - 
ok 20 - 
ok 21 - 
ok 22 - 
ok 23 - 
ok 24 - 
ok 25 - 
ok 26 - 
ok 27 - 
ok 28 - 
ok 29 - 
ok 30 - 
ok 31 - 
ok 32 - 
ok 33 - 
ok 34 - 
ok 35 - 
ok 36 - 
ok 37 - 
ok 38 - 
ok 39 - 
ok 40 - 
ok 41 - 
ok 42 - 
ok 43 - 
ok 44 - 
ok 45 - 
ok 46 - 
ok 47 - 
ok 48 - 
ok 49 - 
ok 50 - 
ok 51 - 
ok 52 - 
ok 53 - 
ok 54 - 
ok 55 - 
ok 56 - 
ok 57 - 
ok 58 - 
ok 59 - 
ok 60 - 
ok 61 - 
ok 62 - 
ok 63 - 
ok 64 - 
ok 65 - 
ok 66 - 
ok 67 - 
ok 68 - 
ok 69 - 
ok 70 - 
ok 71 - 
ok 72 - 
ok 73 - 
ok 74 - 
ok 75 - 
ok 76 - 
ok 77 - 
ok 78 - 
ok 79 - 
ok 80 - 
ok 81 - 
ok 82 - 
ok 83 - 
ok 84 - 
ok 85 - 
ok 86 - 
ok 87 - 
ok 88 - 
ok 89 - 
ok 90 - 
ok 91 - 
ok 92 - 
ok 93 - 
ok 94 - 
ok 95 - 
ok 96 - 
ok 97 - 
ok 98 - 
ok 99 - 
ok 100 - 
ok 101 - 
ok 102 - 
ok 103 - 
ok 104 - 
ok 105 - 
ok 106 - 
ok 107 - 
ok 108 - 
ok 109 - 
ok 110 - 
ok 111 …
»»»»» (output was trimmed  because it is too large)
»»»»» Script exit code: 0
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 92c17e9c235d6cdab71b387094fa06c04f81b54e
»»»»» Script output:
ok 1 - 
ok 2 - 
ok 3 - 
ok 4 - 
ok 5 - 
ok 6 - 
ok 7 - 
ok 8 - 
ok 9 - 
ok 10 - 
ok 11 - 
ok 12 - 
ok 13 - 
ok 14 - 
ok 15 - 
ok 16 - 
ok 17 - 
ok 18 - 
ok 19 - 
ok 20 - 
ok 21 - 
ok 22 - 
ok 23 - 
ok 24 - 
ok 25 - 
ok 26 - 
ok 27 - 
ok 28 - 
ok 29 - 
ok 30 - 
ok 31 - 
ok 32 - 
ok 33 - 
ok 34 - 
ok 35 - 
ok 36 - 
ok 37 - 
ok 38 - 
ok 39 - 
ok 40 - 
ok 41 - 
ok 42 - 
ok 43 - 
ok 44 - 
ok 45 - 
ok 46 - 
ok 47 - 
ok 48 - 
ok 49 - 
ok 50 - 
ok 51 - 
ok 52 - 
ok 53 - 
ok 54 - 
ok 55 - 
ok 56 - 
ok 57 - 
ok 58 - 
ok 59 - 
ok 60 - 
ok 61 - 
ok 62 - 
ok 63 - 
ok 64 - 
ok 65 - 
ok 66 - 
ok 67 - 
ok 68 - 
ok 69 - 
ok 70 - 
ok 71 - 
ok 72 - 
ok 73 - 
ok 74 - 
ok 75 - 
ok 76 - 
ok 77 - 
ok 78 - 
ok 79 - 
ok 80 - 
ok 81 - 
ok 82 - 
ok 83 - 
ok 84 - 
ok 85 - 
ok 86 - 
ok 87 - 
ok 88 - 
ok 89 - 
ok 90 - 
ok 91 - 
ok 92 - 
ok 93 - 
ok 94 - 
ok 95 - 
ok 96 - 
ok 97 - 
ok 98 - 
ok 99 - 
ok 100 - 
ok 101 - 
ok 102 - 
ok 103 - 
ok 104 - 
ok 105 - 
ok 106 - 
ok 107 - 
ok 108 - 
ok 109 - 
ok 110 - 
ok 111 …
»»»»» (output was trimmed  because it is too large)
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 54187ec6de56db17c021ebe6a2991d7bf8e6264b
»»»»» Script output:
ok 1 - 
ok 2 - 
ok 3 - 
ok 4 - 
ok 5 - 
ok 6 - 
ok 7 - 
ok 8 - 
ok 9 - 
ok 10 - 
ok 11 - 
ok 12 - 
ok 13 - 
ok 14 - 
ok 15 - 
ok 16 - 
ok 17 - 
ok 18 - 
ok 19 - 
ok 20 - 
ok 21 - 
ok 22 - 
ok 23 - 
ok 24 - 
ok 25 - 
ok 26 - 
ok 27 - 
ok 28 - 
ok 29 - 
ok 30 - 
ok 31 - 
ok 32 - 
ok 33 - 
ok 34 - 
ok 35 - 
ok 36 - 
ok 37 - 
ok 38 - 
ok 39 - 
ok 40 - 
ok 41 - 
ok 42 - 
ok 43 - 
ok 44 - 
ok 45 - 
ok 46 - 
ok 47 - 
ok 48 - 
ok 49 - 
ok 50 - 
ok 51 - 
ok 52 - 
ok 53 - 
ok 54 - 
ok 55 - 
ok 56 - 
ok 57 - 
ok 58 - 
ok 59 - 
ok 60 - 
ok 61 - 
ok 62 - 
ok 63 - 
ok 64 - 
ok 65 - 
ok 66 - 
ok 67 - 
ok 68 - 
ok 69 - 
ok 70 - 
ok 71 - 
ok 72 - 
ok 73 - 
ok 74 - 
ok 75 - 
ok 76 - 
ok 77 - 
ok 78 - 
ok 79 - 
ok 80 - 
ok 81 - 
ok 82 - 
ok 83 - 
ok 84 - 
ok 85 - 
ok 86 - 
ok 87 - 
ok 88 - 
ok 89 - 
ok 90 - 
ok 91 - 
ok 92 - 
ok 93 - 
ok 94 - 
ok 95 - 
ok 96 - 
ok 97 - 
ok 98 - 
ok 99 - 
ok 100 - 
ok 101 - 
ok 102 - 
ok 103 - 
ok 104 - 
ok 105 - 
ok 106 - 
ok 107 - 
ok 108 - 
ok 109 - 
ok 110 - 
ok 111 …
»»»»» (output was trimmed  because it is too large)
»»»»» Script exit code: 0
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing a136eb73b912be4327036e59e648dc303233cb15
»»»»» Script output:
ok 1 - 
ok 2 - 
ok 3 - 
ok 4 - 
ok 5 - 
ok 6 - 
ok 7 - 
ok 8 - 
ok 9 - 
ok 10 - 
ok 11 - 
ok 12 - 
ok 13 - 
ok 14 - 
ok 15 - 
ok 16 - 
ok 17 - 
ok 18 - 
ok 19 - 
ok 20 - 
ok 21 - 
ok 22 - 
ok 23 - 
ok 24 - 
ok 25 - 
ok 26 - 
ok 27 - 
ok 28 - 
ok 29 - 
ok 30 - 
ok 31 - 
ok 32 - 
ok 33 - 
ok 34 - 
ok 35 - 
ok 36 - 
ok 37 - 
ok 38 - 
ok 39 - 
ok 40 - 
ok 41 - 
ok 42 - 
ok 43 - 
ok 44 - 
ok 45 - 
ok 46 - 
ok 47 - 
ok 48 - 
ok 49 - 
ok 50 - 
ok 51 - 
ok 52 - 
ok 53 - 
ok 54 - 
ok 55 - 
ok 56 - 
ok 57 - 
ok 58 - 
ok 59 - 
ok 60 - 
ok 61 - 
ok 62 - 
ok 63 - 
ok 64 - 
ok 65 - 
ok 66 - 
ok 67 - 
ok 68 - 
ok 69 - 
ok 70 - 
ok 71 - 
ok 72 - 
ok 73 - 
ok 74 - 
ok 75 - 
ok 76 - 
ok 77 - 
ok 78 - 
ok 79 - 
ok 80 - 
ok 81 - 
ok 82 - 
ok 83 - 
ok 84 - 
ok 85 - 
ok 86 - 
ok 87 - 
ok 88 - 
ok 89 - 
ok 90 - 
ok 91 - 
ok 92 - 
ok 93 - 
ok 94 - 
ok 95 - 
ok 96 - 
ok 97 - 
ok 98 - 
ok 99 - 
ok 100 - 
ok 101 - 
ok 102 - 
ok 103 - 
ok 104 - 
ok 105 - 
ok 106 - 
ok 107 - 
ok 108 - 
ok 109 - 
ok 110 - 
ok 111 …
»»»»» (output was trimmed  because it is too large)
»»»»» Script exit code: 0
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing f3c26921b873766ba1ad7372955112ae85b18ba8
»»»»» Script output:
ok 1 - 
ok 2 - 
ok 3 - 
ok 4 - 
ok 5 - 
ok 6 - 
ok 7 - 
ok 8 - 
ok 9 - 
ok 10 - 
ok 11 - 
ok 12 - 
ok 13 - 
ok 14 - 
ok 15 - 
ok 16 - 
ok 17 - 
ok 18 - 
ok 19 - 
ok 20 - 
ok 21 - 
ok 22 - 
ok 23 - 
ok 24 - 
ok 25 - 
ok 26 - 
ok 27 - 
ok 28 - 
ok 29 - 
ok 30 - 
ok 31 - 
ok 32 - 
ok 33 - 
ok 34 - 
ok 35 - 
ok 36 - 
ok 37 - 
ok 38 - 
ok 39 - 
ok 40 - 
ok 41 - 
ok 42 - 
ok 43 - 
ok 44 - 
ok 45 - 
ok 46 - 
ok 47 - 
ok 48 - 
ok 49 - 
ok 50 - 
ok 51 - 
ok 52 - 
ok 53 - 
ok 54 - 
ok 55 - 
ok 56 - 
ok 57 - 
ok 58 - 
ok 59 - 
ok 60 - 
ok 61 - 
ok 62 - 
ok 63 - 
ok 64 - 
ok 65 - 
ok 66 - 
ok 67 - 
ok 68 - 
ok 69 - 
ok 70 - 
ok 71 - 
ok 72 - 
ok 73 - 
ok 74 - 
ok 75 - 
ok 76 - 
ok 77 - 
ok 78 - 
ok 79 - 
ok 80 - 
ok 81 - 
ok 82 - 
ok 83 - 
ok 84 - 
ok 85 - 
ok 86 - 
ok 87 - 
ok 88 - 
ok 89 - 
ok 90 - 
ok 91 - 
ok 92 - 
ok 93 - 
ok 94 - 
ok 95 - 
ok 96 - 
ok 97 - 
ok 98 - 
ok 99 - 
ok 100 - 
ok 101 - 
ok 102 - 
ok 103 - 
ok 104 - 
ok 105 - 
ok 106 - 
ok 107 - 
ok 108 - 
ok 109 - 
ok 110 - 
ok 111 …
»»»»» (output was trimmed  because it is too large)
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 8437418432a718b40b734f66869453f2e00972a5
»»»»» Script output:
ok 1 - 
ok 2 - 
ok 3 - 
ok 4 - 
ok 5 - 
ok 6 - 
ok 7 - 
ok 8 - 
ok 9 - 
ok 10 - 
ok 11 - 
ok 12 - 
ok 13 - 
ok 14 - 
ok 15 - 
ok 16 - 
ok 17 - 
ok 18 - 
ok 19 - 
ok 20 - 
ok 21 - 
ok 22 - 
ok 23 - 
ok 24 - 
ok 25 - 
ok 26 - 
ok 27 - 
ok 28 - 
ok 29 - 
ok 30 - 
ok 31 - 
ok 32 - 
ok 33 - 
ok 34 - 
ok 35 - 
ok 36 - 
ok 37 - 
ok 38 - 
ok 39 - 
ok 40 - 
ok 41 - 
ok 42 - 
ok 43 - 
ok 44 - 
ok 45 - 
ok 46 - 
ok 47 - 
ok 48 - 
ok 49 - 
ok 50 - 
ok 51 - 
ok 52 - 
ok 53 - 
ok 54 - 
ok 55 - 
ok 56 - 
ok 57 - 
ok 58 - 
ok 59 - 
ok 60 - 
ok 61 - 
ok 62 - 
ok 63 - 
ok 64 - 
ok 65 - 
ok 66 - 
ok 67 - 
ok 68 - 
ok 69 - 
ok 70 - 
ok 71 - 
ok 72 - 
ok 73 - 
ok 74 - 
ok 75 - 
ok 76 - 
ok 77 - 
ok 78 - 
ok 79 - 
ok 80 - 
ok 81 - 
ok 82 - 
ok 83 - 
ok 84 - 
ok 85 - 
ok 86 - 
ok 87 - 
ok 88 - 
ok 89 - 
ok 90 - 
ok 91 - 
ok 92 - 
ok 93 - 
ok 94 - 
ok 95 - 
ok 96 - 
ok 97 - 
ok 98 - 
ok 99 - 
ok 100 - 
ok 101 - 
ok 102 - 
ok 103 - 
ok 104 - 
ok 105 - 
ok 106 - 
ok 107 - 
ok 108 - 
ok 109 - 
ok 110 - 
ok 111 …
»»»»» (output was trimmed  because it is too large)
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing f6c45b817aeb2b90054df11936e4ccc131744403
»»»»» Script output:
ok 1 - 
ok 2 - 
ok 3 - 
ok 4 - 
ok 5 - 
ok 6 - 
ok 7 - 
ok 8 - 
ok 9 - 
ok 10 - 
ok 11 - 
ok 12 - 
ok 13 - 
ok 14 - 
ok 15 - 
ok 16 - 
ok 17 - 
ok 18 - 
ok 19 - 
ok 20 - 
ok 21 - 
ok 22 - 
ok 23 - 
ok 24 - 
ok 25 - 
ok 26 - 
ok 27 - 
ok 28 - 
ok 29 - 
ok 30 - 
ok 31 - 
ok 32 - 
ok 33 - 
ok 34 - 
ok 35 - 
ok 36 - 
ok 37 - 
ok 38 - 
ok 39 - 
ok 40 - 
ok 41 - 
ok 42 - 
ok 43 - 
ok 44 - 
ok 45 - 
ok 46 - 
ok 47 - 
ok 48 - 
ok 49 - 
ok 50 - 
ok 51 - 
ok 52 - 
ok 53 - 
ok 54 - 
ok 55 - 
ok 56 - 
ok 57 - 
ok 58 - 
ok 59 - 
ok 60 - 
ok 61 - 
ok 62 - 
ok 63 - 
ok 64 - 
ok 65 - 
ok 66 - 
ok 67 - 
ok 68 - 
ok 69 - 
ok 70 - 
ok 71 - 
ok 72 - 
ok 73 - 
ok 74 - 
ok 75 - 
ok 76 - 
ok 77 - 
ok 78 - 
ok 79 - 
ok 80 - 
ok 81 - 
ok 82 - 
ok 83 - 
ok 84 - 
ok 85 - 
ok 86 - 
ok 87 - 
ok 88 - 
ok 89 - 
ok 90 - 
ok 91 - 
ok 92 - 
ok 93 - 
ok 94 - 
ok 95 - 
ok 96 - 
ok 97 - 
ok 98 - 
ok 99 - 
ok 100 - 
ok 101 - 
ok 102 - 
ok 103 - 
ok 104 - 
ok 105 - 
ok 106 - 
ok 107 - 
ok 108 - 
ok 109 - 
ok 110 - 
ok 111 …
»»»»» (output was trimmed  because it is too large)
»»»»» Script exit code: 0
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 0 (None), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 6ef16cac1db49179718f24babcd59c1dbf579667
»»»»» Script output:
ok 1 - 
ok 2 - 
ok 3 - 
ok 4 - 
ok 5 - 
ok 6 - 
ok 7 - 
ok 8 - 
ok 9 - 
ok 10 - 
ok 11 - 
ok 12 - 
ok 13 - 
ok 14 - 
ok 15 - 
ok 16 - 
ok 17 - 
ok 18 - 
ok 19 - 
ok 20 - 
ok 21 - 
ok 22 - 
ok 23 - 
ok 24 - 
ok 25 - 
ok 26 - 
ok 27 - 
ok 28 - 
ok 29 - 
ok 30 - 
ok 31 - 
ok 32 - 
ok 33 - 
ok 34 - 
ok 35 - 
ok 36 - 
ok 37 - 
ok 38 - 
ok 39 - 
ok 40 - 
ok 41 - 
ok 42 - 
ok 43 - 
ok 44 - 
ok 45 - 
ok 46 - 
ok 47 - 
ok 48 - 
ok 49 - 
ok 50 - 
ok 51 - 
ok 52 - 
ok 53 - 
ok 54 - 
ok 55 - 
ok 56 - 
ok 57 - 
ok 58 - 
ok 59 - 
ok 60 - 
ok 61 - 
ok 62 - 
ok 63 - 
ok 64 - 
ok 65 - 
ok 66 - 
ok 67 - 
ok 68 - 
ok 69 - 
ok 70 - 
ok 71 - 
ok 72 - 
ok 73 - 
ok 74 - 
ok 75 - 
ok 76 - 
ok 77 - 
ok 78 - 
ok 79 - 
ok 80 - 
ok 81 - 
ok 82 - 
ok 83 - 
ok 84 - 
ok 85 - 
ok 86 - 
ok 87 - 
ok 88 - 
ok 89 - 
ok 90 - 
ok 91 - 
ok 92 - 
ok 93 - 
ok 94 - 
ok 95 - 
ok 96 - 
ok 97 - 
ok 98 - 
ok 99 - 
ok 100 - 
ok 101 - 
ok 102 - 
ok 103 - 
ok 104 - 
ok 105 - 
ok 106 - 
ok 107 - 
ok 108 - 
ok 109 - 
ok 110 - 
ok 111 …
»»»»» (output was trimmed  because it is too large)
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 468d4312e0fb4b77e499a153da7af9cdacdd3f9f
»»»»» Script output:
ok 1 - 
ok 2 - 
ok 3 - 
ok 4 - 
ok 5 - 
ok 6 - 
ok 7 - 
ok 8 - 
ok 9 - 
ok 10 - 
ok 11 - 
ok 12 - 
ok 13 - 
ok 14 - 
ok 15 - 
ok 16 - 
ok 17 - 
ok 18 - 
ok 19 - 
ok 20 - 
ok 21 - 
ok 22 - 
ok 23 - 
ok 24 - 
ok 25 - 
ok 26 - 
ok 27 - 
ok 28 - 
ok 29 - 
ok 30 - 
ok 31 - 
ok 32 - 
ok 33 - 
ok 34 - 
ok 35 - 
ok 36 - 
ok 37 - 
ok 38 - 
ok 39 - 
ok 40 - 
ok 41 - 
ok 42 - 
ok 43 - 
ok 44 - 
ok 45 - 
ok 46 - 
ok 47 - 
ok 48 - 
ok 49 - 
ok 50 - 
ok 51 - 
ok 52 - 
ok 53 - 
ok 54 - 
ok 55 - 
ok 56 - 
ok 57 - 
ok 58 - 
ok 59 - 
ok 60 - 
ok 61 - 
ok 62 - 
ok 63 - 
ok 64 - 
ok 65 - 
ok 66 - 
ok 67 - 
ok 68 - 
ok 69 - 
ok 70 - 
ok 71 - 
ok 72 - 
ok 73 - 
ok 74 - 
ok 75 - 
ok 76 - 
ok 77 - 
ok 78 - 
ok 79 - 
ok 80 - 
ok 81 - 
ok 82 - 
ok 83 - 
ok 84 - 
ok 85 - 
ok 86 - 
ok 87 - 
ok 88 - 
ok 89 - 
ok 90 - 
ok 91 - 
ok 92 - 
ok 93 - 
ok 94 - 
ok 95 - 
ok 96 - 
ok 97 - 
ok 98 - 
ok 99 - 
ok 100 - 
ok 101 - 
ok 102 - 
ok 103 - 
ok 104 - 
ok 105 - 
ok 106 - 
ok 107 - 
ok 108 - 
ok 109 - 
ok 110 - 
ok 111 …
»»»»» (output was trimmed  because it is too large)
»»»»» Script exit code: 0
»»»»» Script exit signal: 1 (SIGHUP)
»»»»» Bisecting by exit signal
»»»»» Current exit signal is 1 (SIGHUP), exit signal on “old” revision is 1 (SIGHUP)
»»»»» Note that on “old” revision exit signal is normally 0 (None), you are probably trying to find when something was fixed
»»»»» If exit signal is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
f6c45b817aeb2b90054df11936e4ccc131744403 is the first new commit
commit f6c45b817aeb2b90054df11936e4ccc131744403
Author: Will "Coke" Coleda <will@coleda.com>
Date:   Sun Mar 20 12:38:17 2016 -0400

    [release] bump NQP revision

:040000 040000 a9e555887c37f5f776ecd2a84ad29257968a2e60 a8b1a564b905a902daf51abc8325499f8b85ac1a M	tools