Attention: this is the key used to sign the certificate requests, anyone holding this can sign certificates on your behalf. So keep it in a safe place!
openssl genrsa -des3 -out rootCA.key 4096
-- This is going to be on Hackage soon! https://github.com/gatlin/surely | |
{-# LANGUAGE BangPatterns #-} | |
-- | | |
-- Module : AI.Surely | |
-- Copyright : 2012 Gatlin Johnson | |
-- License : LGPL 3.0 | |
-- Maintainer : rokenrol@gmail.com | |
-- Stability : experimental |
Microsoft partnered with Canonical to create Bash on Ubuntu on Windows, running through a technology called the Windows Subsystem for Linux. Below are instructions on how to set up the ssh server to run automatically at boot.
/etc/ssh/sshd_config
file by running the command sudo vi /etc/ssh/sshd_config
and do the following
Port
to 2222 (or any other port above 1000)PasswordAuthentication
to yes. This can be changed back to no if ssh keys are setup.sudo service ssh --full-restart
Enable DCI debugging on Gigabyte-BKi5HA-7200 | |
-------------------------------------------- | |
The Gigabyte-BKi5HA-7200 (Kabylake i5-7200 processor) can be debugged with only a USB debug cable, a | |
special cable that crosses only the data signals and has the power signals | |
removed. You can buy these cables at i.e. https://www.datapro.net/products/usb-3-0-super-speed-a-a-debugging-cable.html | |
The hurdle you have to overcome before you can access DCI however is that you | |
need to set some bits in hardware that first enable DCI and also enable the debug port so that DCI can control the cores. | |
There are lots of guides in howto patch the BIOS but only these two really describes all the steps using only freely accessible tools: |