akash73

Black Panther X
Elektra X
The Shadow X
 Aquaman X
The Defenders X
Fantastic Four X
Wonder Woman X
Asterix X
Batwoman X
Marvelman X

akash73

;Start Print
G92 E0 ; Reset Extruder
M140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature
M104 S{material_print_temperature_layer_0} ; Set Extruder temperature
G28 ; Home all axes
M109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature
M190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature
G29 ; Auto bed-level (BL-Touch)
M500 ; Used to store G29 results in memory
G92 E0 ; Reset Extruder

akash73

; End Gcode
M140 S0 ;Turn-off bed
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positionning

akash73

void setup() {
mbed::Watchdog::get_instance().start(10000);  
}

void loop() {
 mbed::Watchdog::get_instance().kick();
}

akash73

#Simple POC for recording audio from X8 + Portenta Max Carrier
#possible evolutions: create a container.

export XTERM=zterm
resize


sudo mount -t vfat /dev/mmcblk1p1 /mnt
sudo docker run -it -u '0' --device '/dev/snd:/dev/snd' -v '/mnt:/sdcard' --tmpfs /tmp --name "alsa-utils" debian:stable-slim bash
apt-get update && apt-get install alsa-utils ffmpeg -y

akash73

   85     NSAPI_ERROR_OK                  =  0,        /*!< no error */
   86     NSAPI_ERROR_WOULD_BLOCK         = -3001,     /*!< no data is not available but call is non-blocking */
   87     NSAPI_ERROR_UNSUPPORTED         = -3002,     /*!< unsupported functionality */
   88     NSAPI_ERROR_PARAMETER           = -3003,     /*!< invalid configuration */
   89     NSAPI_ERROR_NO_CONNECTION       = -3004,     /*!< not connected to a network */
   90     NSAPI_ERROR_NO_SOCKET           = -3005,     /*!< socket not available for use */
   91     NSAPI_ERROR_NO_ADDRESS          = -3006,     /*!< IP address is not known */
   92     NSAPI_ERROR_NO_MEMORY           = -3007,     /*!< memory resource not available */
   93     NSAPI_ERROR_NO_SSID             = -3008,     /*!< ssid not found */
   94     NSAPI_ERROR_DNS_FAILURE         = -3009,     /*!< DNS failed to complete successfully */

akash73

#include "Arduino.h"
#include "RealTimeClock.h"
#include "mbed.h"

void setup() {
  Serial.begin(9600);
  set_time(1256729737);
  timestamp_t res;
}

akash73

#!/usr/bin/env bash
# login-welcome.sh — Banner informativo al login per Debian/Linux


# Esci se non interattivo
case $- in *i*) ;; *) return 0 2>/dev/null || exit 0 ;; esac

# colours
if command -v tput >/dev/null 2>&1 && [ -n "$TERM" ] && [ "$TERM" != "dumb" ]; then
  BOLD="$(tput bold)"; DIM="$(tput dim)"; RESET="$(tput sgr0)"

akash73

🖥️ Linux Login Welcome Script (Debian/Ubuntu)

This script displays useful system information at login, such as:

• Hostname, OS, and Kernel
• Local IP address (IPv4)
• Wi-Fi SSID (if available)
• Uptime and load average
• Disk and memory usage
• CPU temperature (if lm-sensors is installed)
• Disk SMART status (if smartmontools is installed)