Skip to content

Instantly share code, notes, and snippets.

@ffainelli

ffainelli/rpi4b.log Secret

Created February 24, 2023 23:38
Show Gist options
  • Save ffainelli/b1a977b5fea837d180ccb800f091218a to your computer and use it in GitHub Desktop.
Save ffainelli/b1a977b5fea837d180ccb800f091218a to your computer and use it in GitHub Desktop.
Download ZIP
Raspberry Pi 4b ftrace warning v6.2-10217-ga93e884edf61
Raw
rpi4b.log
Starting start4.elf @ 0xfec00200 partition -1
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.2.0 (florian@silverado) (aarch64-buildroot-linux-musl-gcc.br_real (Buildroot 2022.08-rc2-21-g4cbf7336914f) 11.3.0, GNU ld (GNU
Binutils) 2.38) #32 SMP Thu Feb 23 17:34:24 PST 2023
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1
[ 0.000000] earlycon: bcm2835aux0 at MMIO32 0x00000000fe215040 (options '115200n8')
[ 0.000000] printk: bootconsole [bcm2835aux0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges
[ 0.000000] kasan: KernelAddressSanitizer initialized (generic)
[ 0.000000] percpu: Embedded 29 pages/cpu s78056 r8192 d32536 u118784
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912
[ 0.000000] Kernel command line: dma.dmachans=0x71f5 bcm2709.boardrev=0xc03111 bcm2709.serial=0x4b11cb83 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio
=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:1C:A0:82 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 earlycon earlyprintk
[ 0.000000] Unknown kernel command line parameters "earlyprintk", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000033400000-0x0000000037400000] (64MB)
[ 0.000000] Memory: 3233456K/4050944K available (15360K kernel code, 6874K rwdata, 7324K rodata, 49280K init, 805K bss, 751952K reserved, 65536K cma-reserv
ed)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 43195 entries in 169 pages
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site bcm2836_arm_irqchip_handle_irq+0x0/0x88
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: ffffffc00809000c x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000000 x24: ffffffc009777be8
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc008090054 x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 383878302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 7172695f6d72615f x9 : dfffffc000000000
[ 0.000000] x8 : 636220657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site gic_handle_irq+0x0/0xbc
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: 0000000000000000 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000000 x24: ffffffc009777bf0
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc0080900dc x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 636278302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 657469732d686374 x9 : dfffffc000000000
[ 0.000000] x8 : 696720657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site __traceiter_initcall_start+0x0/0x84
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: ffffffc00809438c x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000030 x24: ffffffc009777c10
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc008094404 x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 343878302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 7265746965636172 x9 : dfffffc000000000
[ 0.000000] x8 : 5f5f20657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site trace_initcall_start_cb+0x0/0x70
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: ffffffc008094494 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000040 x24: ffffffc009777c20
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc008094544 x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 303778302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 6e695f6563617274 x9 : dfffffc000000000
[ 0.000000] x8 : 727420657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site run_init_process+0x0/0x11c
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: 0000000000000000 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000040 x24: ffffffc009777c28
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc0080945dc x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 63313178302f3078 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 757220657469732d x9 : dfffffc000000000
[ 0.000000] x8 : 757220657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site initcall_blacklisted+0x0/0x170
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: ffffffc008094704 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000050 x24: ffffffc009777c38
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc00809508c x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 30373178302f3078 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 616374696e692065 x9 : dfffffc000000000
[ 0.000000] x8 : 6e6920657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site trace_initcall_finish_cb+0x0/0x74
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: 0000000000000000 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000050 x24: ffffffc009777c40
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc0080952d4 x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 343778302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 696e695f65636172 x9 : dfffffc000000000
[ 0.000000] x8 : 727420657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site do_one_initcall+0x0/0x2a0
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: 0000000000000000 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000050 x24: ffffffc009777c48
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc0080954ac x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 30613278302f3078 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 6420657469732d68 x9 : dfffffc000000000
[ 0.000000] x8 : 6f6420657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site match_dev_by_label+0x0/0x64
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: ffffffc008095704 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000060 x24: ffffffc009777c58
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc00809574c x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 343678302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 74616d2065746973 x9 : dfffffc000000000
[ 0.000000] x8 : 616d20657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site wait_for_initramfs+0x0/0x6c
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: ffffffc00809590c x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000090 x24: ffffffc009777c78
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc008095d7c x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 633678302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 6961772065746973 x9 : dfffffc000000000
[ 0.000000] x8 : 617720657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:6856 ftrace_process_locs+0x2ec/0x4a8
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_process_locs+0x2ec/0x4a8
[ 0.000000] lr : ftrace_process_locs+0x2e4/0x4a8
[ 0.000000] sp : ffffffc00c6e7dc0
[ 0.000000] x29: ffffffc00c6e7dc0 x28: ffffffc0097489b4 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000054260 x24: ffffffc0097cc1b0
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: ffffff804000e000
[ 0.000000] x20: ffffffc00cdfa1c0 x19: ffffff804000e000 x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 633678302f307830 x12: 1ffffff8018e1388
[ 0.000000] x11: ffffffb8018e1388 x10: 6961772065746973 x9 : dfffffc000000000
[ 0.000000] x8 : 617720657469732d x7 : ffffffc00c709c40 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : ffffffc0081ec504
[ 0.000000] x2 : 0000000000000007 x1 : 0000000000000000 x0 : ffffff804000e100
[ 0.000000] Call trace:
[ 0.000000] ftrace_process_locs+0x2ec/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ftrace: allocated 169 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.008541] Console: colour dummy device 80x25
[ 0.013054] printk: console [tty0] enabled
[ 0.017219] printk: bootconsole [bcm2835aux0] disabled
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.2.0 (florian@silverado) (aarch64-buildroot-linux-musl-gcc.br_real (Buildroot 2022.08-rc2-21-g4cbf7336914f) 11.3.0, GNU ld (GNU
Binutils) 2.38) #32 SMP Thu Feb 23 17:34:24 PST 2023
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1
[ 0.000000] earlycon: bcm2835aux0 at MMIO32 0x00000000fe215040 (options '115200n8')
[ 0.000000] printk: bootconsole [bcm2835aux0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges
[ 0.000000] kasan: KernelAddressSanitizer initialized (generic)
[ 0.000000] percpu: Embedded 29 pages/cpu s78056 r8192 d32536 u118784
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912
[ 0.000000] Kernel command line: dma.dmachans=0x71f5 bcm2709.boardrev=0xc03111 bcm2709.serial=0x4b11cb83 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio
=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:1C:A0:82 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 earlycon earlyprintk
[ 0.000000] Unknown kernel command line parameters "earlyprintk", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000033400000-0x0000000037400000] (64MB)
[ 0.000000] Memory: 3233456K/4050944K available (15360K kernel code, 6874K rwdata, 7324K rodata, 49280K init, 805K bss, 751952K reserved, 65536K cma-reserv
ed)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 43195 entries in 169 pages
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site bcm2836_arm_irqchip_handle_irq+0x0/0x88
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: ffffffc00809000c x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000000 x24: ffffffc009777be8
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc008090054 x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 383878302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 7172695f6d72615f x9 : dfffffc000000000
[ 0.000000] x8 : 636220657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site gic_handle_irq+0x0/0xbc
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: 0000000000000000 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000000 x24: ffffffc009777bf0
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc0080900dc x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 636278302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 657469732d686374 x9 : dfffffc000000000
[ 0.000000] x8 : 696720657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site __traceiter_initcall_start+0x0/0x84
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: ffffffc00809438c x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000030 x24: ffffffc009777c10
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc008094404 x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 343878302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 7265746965636172 x9 : dfffffc000000000
[ 0.000000] x8 : 5f5f20657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site trace_initcall_start_cb+0x0/0x70
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: ffffffc008094494 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000040 x24: ffffffc009777c20
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc008094544 x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 303778302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 6e695f6563617274 x9 : dfffffc000000000
[ 0.000000] x8 : 727420657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site run_init_process+0x0/0x11c
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: 0000000000000000 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000040 x24: ffffffc009777c28
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc0080945dc x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 63313178302f3078 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 757220657469732d x9 : dfffffc000000000
[ 0.000000] x8 : 757220657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site initcall_blacklisted+0x0/0x170
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: ffffffc008094704 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000050 x24: ffffffc009777c38
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc00809508c x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 30373178302f3078 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 616374696e692065 x9 : dfffffc000000000
[ 0.000000] x8 : 6e6920657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site trace_initcall_finish_cb+0x0/0x74
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: 0000000000000000 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000050 x24: ffffffc009777c40
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc0080952d4 x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 343778302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 696e695f65636172 x9 : dfffffc000000000
[ 0.000000] x8 : 727420657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site do_one_initcall+0x0/0x2a0
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: 0000000000000000 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000050 x24: ffffffc009777c48
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc0080954ac x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 30613278302f3078 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 6420657469732d68 x9 : dfffffc000000000
[ 0.000000] x8 : 6f6420657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site match_dev_by_label+0x0/0x64
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: ffffffc008095704 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000060 x24: ffffffc009777c58
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc00809574c x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 343678302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 74616d2065746973 x9 : dfffffc000000000
[ 0.000000] x8 : 616d20657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] Misaligned patch-site wait_for_initramfs+0x0/0x6c
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_call_adjust+0x4c/0x70
[ 0.000000] lr : ftrace_call_adjust+0x4c/0x70
[ 0.000000] sp : ffffffc00c6e7d90
[ 0.000000] x29: ffffffc00c6e7d90 x28: ffffffc00809590c x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000000090 x24: ffffffc009777c78
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: 0000000000000000
[ 0.000000] x20: ffffffc008fa5340 x19: ffffffc008095d7c x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 633678302f307830 x12: 1ffffff8018dcf38
[ 0.000000] x11: ffffffb8018dcf38 x10: 6961772065746973 x9 : dfffffc000000000
[ 0.000000] x8 : 617720657469732d x7 : ffffffc00c6e79c7 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffc00c6f77c0
[ 0.000000] Call trace:
[ 0.000000] ftrace_call_adjust+0x4c/0x70
[ 0.000000] ftrace_process_locs+0x294/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:6856 ftrace_process_locs+0x2ec/0x4a8
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.2.0 #32
[ 0.000000] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_process_locs+0x2ec/0x4a8
[ 0.000000] lr : ftrace_process_locs+0x2e4/0x4a8
[ 0.000000] sp : ffffffc00c6e7dc0
[ 0.000000] x29: ffffffc00c6e7dc0 x28: ffffffc0097489b4 x27: 0000000000001000
[ 0.000000] x26: ffffff8040080000 x25: 0000000000054260 x24: ffffffc0097cc1b0
[ 0.000000] x23: ffffffc00c85c460 x22: 0000000000000000 x21: ffffff804000e000
[ 0.000000] x20: ffffffc00cdfa1c0 x19: ffffff804000e000 x18: 000000004e2504be
[ 0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.000000] x14: 0000000000000000 x13: 633678302f307830 x12: 1ffffff8018e1388
[ 0.000000] x11: ffffffb8018e1388 x10: 6961772065746973 x9 : dfffffc000000000
[ 0.000000] x8 : 617720657469732d x7 : ffffffc00c709c40 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000001 x4 : dfffffc000000000 x3 : ffffffc0081ec504
[ 0.000000] x2 : 0000000000000007 x1 : 0000000000000000 x0 : ffffff804000e100
[ 0.000000] Call trace:
[ 0.000000] ftrace_process_locs+0x2ec/0x4a8
[ 0.000000] ftrace_init+0x84/0x140
[ 0.000000] start_kernel+0x170/0x398
[ 0.000000] __primary_switched+0xb8/0xc8
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ftrace: allocated 169 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.008541] Console: colour dummy device 80x25
[ 0.013054] printk: console [tty0] enabled
[ 0.017219] printk: bootconsole [bcm2835aux0] disabled
[ 0.022487] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.022526] pid_max: default: 32768 minimum: 301
[ 0.023026] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.023093] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.026317] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.026370] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.026605] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.027027] rcu: Hierarchical SRCU implementation.
[ 0.027048] rcu: Max phase no-delay instances is 1000.
[ 0.029584] EFI services will not be available.
[ 0.030253] smp: Bringing up secondary CPUs ...
[ 0.031330] Detected PIPT I-cache on CPU1
[ 0.031496] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.032604] Detected PIPT I-cache on CPU2
[ 0.032745] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.033828] Detected PIPT I-cache on CPU3
[ 0.033973] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.034089] smp: Brought up 1 node, 4 CPUs
[ 0.034188] SMP: Total of 4 processors activated.
[ 0.034212] CPU features: detected: 32-bit EL0 Support
[ 0.034233] CPU features: detected: CRC32 instructions
[ 0.034338] CPU: All CPU(s) started at EL2
[ 0.034359] alternatives: applying system-wide alternatives
[ 0.036202] devtmpfs: initialized
[ 0.061345] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.061423] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.067672] pinctrl core: initialized pinctrl subsystem
[ 0.069101] DMI not present or invalid.
[ 0.070018] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.073370] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.074018] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.074447] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.075776] thermal_sys: Registered thermal governor 'step_wise'
[ 0.076559] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.076753] ASID allocator initialised with 65536 entries
[ 0.076983] Serial: AMBA PL011 UART driver
[ 0.107434] SCSI subsystem initialized
[ 0.107894] usbcore: registered new interface driver usbfs
[ 0.107996] usbcore: registered new interface driver hub
[ 0.108101] usbcore: registered new device driver usb
[ 0.108529] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.108990] mc: Linux media interface: v0.10
[ 0.109083] videodev: Linux video capture interface: v2.00
[ 0.109221] pps_core: LinuxPPS API ver. 1 registered
[ 0.109244] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.109308] PTP clock support registered
[ 0.109762] Advanced Linux Sound Architecture Driver Initialized.
[ 0.111553] Bluetooth: Core ver 2.22
[ 0.111641] NET: Registered PF_BLUETOOTH protocol family
[ 0.111664] Bluetooth: HCI device and connection manager initialized
[ 0.111698] Bluetooth: HCI socket layer initialized
[ 0.111725] Bluetooth: L2CAP socket layer initialized
[ 0.111769] Bluetooth: SCO socket layer initialized
[ 0.112268] vgaarb: loaded
[ 0.459557] clocksource: Switched to clocksource arch_sys_counter
[ 0.478201] NET: Registered PF_INET protocol family
[ 0.478800] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.489005] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.489166] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.489309] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.490012] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.491227] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.491684] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.491925] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.492371] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.493686] RPC: Registered named UNIX socket transport module.
[ 0.493731] RPC: Registered udp transport module.
[ 0.493752] RPC: Registered tcp transport module.
[ 0.493772] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.498770] PCI: CLS 0 bytes, default 64
[ 0.503130] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.505972] Initialise system trusted keyrings
[ 0.506480] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 0.535098] Key type asymmetric registered
[ 0.535162] Asymmetric key parser 'x509' registered
[ 0.535371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.535407] io scheduler mq-deadline registered
[ 0.535429] io scheduler kyber registered
[ 0.536455] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 18)
[ 0.542771] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.542849] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 0.542940] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[ 0.543021] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000
[ 0.544347] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.544414] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.544457] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 0.544561] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 0.544680] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.548849] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator
[ 0.549255] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator
[ 0.549412] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator
[ 0.657638] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 0.657894] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.657993] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.658238] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 0.667796] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 0.667856] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 0.667909] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.667938] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 0.668391] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 0.668824] pcieport 0000:00:00.0: PME: Signaling with IRQ 23
[ 0.669565] pcieport 0000:00:00.0: AER: enabled with IRQ 23
[ 0.680284] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.684105] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 31, base_baud = 62500001) is a 16550
[ 0.684211] printk: console [ttyS1] enabled
[ 3.417852] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 3.431484] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 5.751685] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 5.760251] usbcore: registered new interface driver zd1211rw
[ 5.766210] usbcore: registered new interface driver lan78xx
[ 5.772061] usbcore: registered new interface driver asix
[ 5.777644] usbcore: registered new interface driver ax88179_178a
[ 5.783933] usbcore: registered new interface driver cdc_ether
[ 5.789958] usbcore: registered new interface driver smsc95xx
[ 5.795887] usbcore: registered new interface driver net1080
[ 5.801749] usbcore: registered new interface driver cdc_subset
[ 5.807862] usbcore: registered new interface driver zaurus
[ 5.813634] usbcore: registered new interface driver cdc_ncm
[ 5.819478] usbcore: registered new interface driver r8153_ecm
[ 5.827655] usbcore: registered new interface driver usb-storage
[ 5.834082] i2c_dev: i2c /dev entries driver
[ 5.842133] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 5.850002] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 5.859302] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 5.866537] sdhci: Secure Digital Host Controller Interface driver
[ 5.872852] sdhci: Copyright(c) Pierre Ossman
[ 5.877478] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.884705] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.891388] usbcore: registered new interface driver usbhid
[ 5.897085] usbhid: USB HID core driver
[ 5.901466] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 5.909249] NET: Registered PF_INET6 protocol family
[ 5.916674] Segment Routing with IPv6
[ 5.920545] In-situ OAM (IOAM) with IPv6
[ 5.924699] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 5.932130] NET: Registered PF_PACKET protocol family
[ 5.958920] Loading compiled-in X.509 certificates
[ 6.001519] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 37, base_baud = 0) is a PL011 rev2
[ 6.010995] serial serial0: tty port ttyAMA0 registered
[ 6.017479] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-02-12T12:36:21
[ 6.035890] raspberrypi-firmware soc:firmware: Request 0x00030066 returned status 0x80000001
[ 6.044544] vc4-drm gpu: [drm] Couldn't stop firmware display driver: -22
[ 6.052089] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops)
[ 6.063356] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops)
[ 6.075192] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops)
[ 6.081944] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops)
[ 6.088384] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops)
[ 6.095424] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops)
[ 6.102499] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops)
[ 6.109358] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops)
[ 6.122293] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
[ 6.154832] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
[ 6.162498] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
[ 6.271623] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
[ 6.281332] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
[ 6.283165] sdhci-iproc fe300000.mmc: allocated mmc-pwrseq
[ 6.293252] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 6.293669] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.298641] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 6.315268] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890
[ 6.320959] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.330646] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 6.331830] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 6.335617] mmc0: SDHCI controller on fe300000.mmc [fe300000.mmc] using PIO
[ 6.339442] mmc1: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 6.339573] cfg80211: failed to load regulatory.db
[ 6.339713] ALSA device list:
[ 6.339721] #0: vc4-hdmi-0
[ 6.339729] #1: vc4-hdmi-1
[ 6.344755] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 6.380390] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 6.388525] hub 1-0:1.0: USB hub found
[ 6.392505] hub 1-0:1.0: 1 port detected
[ 6.399306] hub 2-0:1.0: USB hub found
[ 6.403262] hub 2-0:1.0: 4 ports detected
[ 6.421465] ==================================================================
[ 6.428848] BUG: KASAN: slab-out-of-bounds in ftrace_free_mem+0x270/0x5a4
[ 6.435773] Read of size 8 at addr ffffff804001fff0 by task swapper/0/1
[ 6.442505]
[ 6.444025] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0 #32
[ 6.447410] mmc1: new ultra high speed DDR50 SDHC card at address 0001
[ 6.451536] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[ 6.451545] Call trace:
[ 6.451549] dump_backtrace+0xf0/0x134
[ 6.451567] show_stack+0x20/0x38
[ 6.460108] mmcblk1: mmc1:0001 EB1QT 29.8 GiB
[ 6.464090] dump_stack_lvl+0x48/0x60
[ 6.464106] print_report+0xa0/0x45c
[ 6.471005] mmcblk1: p1 p2
[ 6.473766] kasan_report+0x98/0xac
[ 6.473781] __asan_load8+0x2c/0x88
[ 6.473795] ftrace_free_mem+0x270/0x5a4
[ 6.473808] ftrace_free_init_mem+0x28/0x34
[ 6.503878] kernel_init+0x44/0x150
[ 6.507440] ret_from_fork+0x10/0x20
[ 6.511088]
[ 6.512605] Allocated by task 0:
[ 6.515890] kasan_save_stack+0x2c/0x58
[ 6.519799] kasan_set_track+0x2c/0x40
[ 6.523619] kasan_save_alloc_info+0x24/0x34
[ 6.527975] ____kasan_kmalloc+0x84/0x9c
[ 6.531974] __kasan_kmalloc+0x10/0x1c
[ 6.535794] kmalloc_node_trace+0x94/0xc4
[ 6.539884] alloc_desc+0x60/0x2d4
[ 6.543354] __irq_alloc_descs+0x170/0x220
[ 6.547532] irq_domain_alloc_descs.part.0+0x6c/0xb4
[ 6.552593] irq_domain_alloc_descs+0x50/0x5c
[ 6.557035] irq_domain_alloc_irqs_locked+0x5c/0x39c
[ 6.562090] __irq_domain_alloc_irqs+0xc0/0xe4
[ 6.566615] __gic_init_bases+0x174/0x23c
[ 6.570703] gic_of_init+0x174/0x494
[ 6.574350] of_irq_init+0x340/0x5f4
[ 6.577995] irqchip_init+0x20/0x34
[ 6.581552] init_IRQ+0x78/0xfc
[ 6.584752] start_kernel+0x1c4/0x398
[ 6.588487] __primary_switched+0xb8/0xc8
[ 6.592572]
[ 6.594089] The buggy address belongs to the object at ffffff804001fc00
[ 6.594089] which belongs to the cache kmalloc-512 of size 512
[ 6.606824] The buggy address is located 496 bytes to the right of
[ 6.606824] 512-byte region [ffffff804001fc00, ffffff804001fe00)
[ 6.619295]
[ 6.620812] The buggy address belongs to the physical page:
[ 6.626480] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4001c
[ 6.635952] head:(____ptrval____) order:2 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0
[ 6.645333] flags: 0x4000000000010200(slab|head|zone=1)
[ 6.650663] raw: 4000000000010200 ffffff8040002600 dead000000000122 0000000000000000
[ 6.651584] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 6.658525] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
[ 6.658532] page dumped because: kasan: bad access detected
[ 6.658537]
[ 6.658541] Memory state around the buggy address:
[ 6.658548] ffffff804001fe80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 6.692442] ffffff804001ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 6.699791] >ffffff804001ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 6.707137] ^
[ 6.714129] ffffff8040020000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 6.721479] ffffff8040020080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 6.728826] ==================================================================
[ 6.736206] Disabling lock debugging due to kernel taint
[ 6.753525] mmc0: new high speed SDIO card at address 0001
[ 6.794389] Freeing unused kernel memory: 49280K
[ 6.799425] Run /init as init process
[ 6.828484] hub 1-1:1.0: USB hub found
[ 6.832761] hub 1-1:1.0: 4 ports detected
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Saving random seed: [ 7.135580] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[ 8.267574] random: crng init done
OK
Starting system message bus: done
Starting bluetoothd: OK
Starting network: OK
Starting dropbear sshd: OK
Welcome to Buildroot
buildroot login: root
# uname -a
Linux buildroot 6.2.0 #32 SMP Thu Feb 23 17:34:24 PST 2023 aarch64 GNU/Linux
#
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment