bjcubsfan

title    Arch Linux
linux    /vmlinuz-linux
initrd   /intel-ucode.img
initrd   /initramfs-linux.img
options  nvme_load=YES root=UUID=e535f1e1-13d7-45e2-b0c6-d9c3c186448c rw

bjcubsfan

# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES=(piix ide_disk reiserfs)
MODULES=()

# BINARIES
# This setting includes any additional binaries a given user may

bjcubsfan

[    0.000000] microcode: microcode updated early to revision 0x2000064, date = 2019-07-31
[    0.000000] Linux version 5.3.1-arch1-1-ARCH (builduser@heftig-3999379) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Sat Sep 21 11:33:49 UTC 2019
[    0.000000] Command line: initrd=\EFI\archiso\intel_ucode.img initrd=\EFI\archiso\amd_ucode.img initrd=\EFI\archiso\archiso.img archisobasedir=arch archisolabel=ARCH_201910
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

bjcubsfan

[    0.000000] Linux version 5.3.1-arch1-1-ARCH (builduser@heftig-3999379) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Sat Sep 21 11:33:49 UTC 2019
[    0.000000] Command line: \\vmlinuz-linux root=PARTUUID=a158dd01-636f-4dcb-b6fc-118427be3bd8 rw add_efi_memmap initrd=\initramfs-linux-fallback.img
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

bjcubsfan

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos

bjcubsfan

# GRUB boot loader configuration

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3"
GRUB_CMDLINE_LINUX="dozfs real_root=ZFS=nand/sys/dirty/root/default zfs=nand/sys/dirty/root/default root=ZFS=nand/sys/dirty/root/default"

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos nvme zfs zfscrypt zfsinfo"

bjcubsfan

Using Vim

These notes are available at http://bit.ly/bj-vim

Ian Langworth Article

I recently updated my vim configuration based on an article I read. Here are some of the best things I have learned from it:

Here is my repo with modifications to what was in the article

bjcubsfan

Set up email for notices

I installed ssmtp and configured it:

/etc/ssmtp/ssmtp.conf
----
#
# /etc/ssmtp/ssmtp.conf -- a config file for sSMTP sendmail.
#
# The person who gets all mail for userids < 1000

bjcubsfan

Job title

Engineer/Programmer/Data Scientist

Job description

LS Technologies has an immediate job available to assist the Federal Aviation Administration (FAA). You will work in the Satellite Support team within the FAA’s National Enterprise Operations (NEO) Directorate. In this job, you will work with the FAA's Wide Area Augmentation System (WAAS). You will learn the workings of this complex system. This knowledge will allow you to be able to investigate anomalous conditions when they occur and develop tools to analyze data from the system.

You will work on a small independent team that has great freedom to choose the right tools and methods to complete any given task. The team constantly improves their knowledge by attending relevant conferences and training sessions. You can set your schedule to work 9 hour days and get Friday off every other week. Working more than 40 hours a week is almost never required.

bjcubsfan

################################################################################
################# Arch Linux mirrorlist generated by Reflector #################
################################################################################

# With:       reflector -c 'United States' --save /home/bpotter/mirrorlist --verbose --sort rate
# When:       2014-09-08 18:54:41 UTC
# From:       https://www.archlinux.org/mirrors/status/json/
# Retrieved:  2014-09-08 18:52:34 UTC
# Last Check: 2014-09-08 18:16:19 UTC