Jachimo

Routing between two UniFi USG based LANs with ZeroTier

Intro

This is a quick explanation of how to configure both ZeroTier and two Ubiquiti UniFi USGs to allow routing between two IPv4 networks. Both networks are in private (RFC1918) address space and each one has its own DHCP service. There is no need for NAT between them, only IP routing.

The two networks are 192.168.1.0/24 (call this the "left" network) and 192.168.10.0/24 (the "right" network) but they can be anything. Also, you can have multiple CIDR blocks on one side or the other of the ZeroTier route; if you do, you just have to create more routing table entries.

putty182

1. Visit https://www.netflix.com/viewingactivity in a reputable browser
2. Open the JS Console.
3. Copy/paste this script, execute it and wait 4 seconds after the page finishes scrolling.
4. ...
5. Profit!

Recent release of Chrome will add a nice 'Copy' button next to the console output.

waitseconds can be adjusted if nessessary to ensure all play history gets loaded.

darconeous

Eagle-200 Local Usage via CURL

You can locally pull data from your Rainforest Eagle-200 using cURL.

Rainforest has published a local API document which explains the details of the protocol. But this particular document is about quickly getting to the point and giving you some cURL commands you can use to immediately start pulling out data.

Prerequisites

First, I'll assume that you have the following environment variables set:

laduke

Motivation

Use a Raspberry Pi as a bridge into my home LAN. The pi is plugged into a switch, which is plugged into an airport express, which is plugged into a cable modem; Nothing fancy.

This isn't a tutorial. Just some example output from a working setup.

steps

off the top of my head, here's the order I would do it in:

• make sure plain old device to device zerotier is working with my LAN/Router/Firewall/ISP

greigdp

Install Notes - Dell XPS 13 (9370) 2018

The laptop works well on Archlinux. A few notes based on the installation guide for the previous version.

Intel GPU Power Saving

Per the Arch wiki, more power can be saved by creating /etc/modprobe.d/i915.confwith the following content:

options i915 modeset=1 enable_rc6=1 enable_fbc=1 enable_guc_loading=1 enable_guc_submission=1 enable_psr=1

dblandin

#!/usr/bin/env bash
exec > >(tee /var/log/prepare-instance.log|logger -t prepare-instance -s 2>/dev/console) 2>&1

set -e

AZ=$(curl --show-error --silent http://169.254.169.254/latest/meta-data/placement/availability-zone)
ID=$(curl --show-error --silent http://169.254.169.254/latest/meta-data/instance-id)
REGION=$(printf "%s" "$AZ" | sed 's/.$//')

set_instance_health() {

ajeetraina

version: '3.3'

services:
  db:
    image: mysql:5.7
    volumes:
      - db_data:/var/lib/mysql
    restart: always
    networks:
      - myvlan

nruth

# load into test setup after `require 'capybara/rails'`

# some sources for below flags and profile settings
# https://stackoverflow.com/questions/43143014/chrome-is-being-controlled-by-automated-test-software/43145088
# https://sqa.stackexchange.com/questions/26051/chrome-driver-2-28-chrome-is-being-controlled-by-automated-test-software-notif
# http://stackoverflow.com/questions/12211781/how-to-maximize-window-in-chrome-using-webdriver-python
# update sources for new Options object
# https://github.com/SeleniumHQ/selenium/wiki/Ruby-Bindings
# https://github.com/teamcapybara/capybara/blob/master/lib/capybara/selenium/driver.rb
begin

bjeanes

class Hash
  # Returns a nested intersection of two Hashes.
  #
  # This draws a parallel to &/intersect on Array and Set.
  #
  # FIXME: However, those methods are not recursive, so it may make more sense
  #        to give this another name.
  #
  # Examples:
  #

patrickfuller

"""
When run in cron, automatically adds compliant alias names to local DNS.
Use at your own risk.

Patrick Fuller, 25 June 17
"""
import re
import paramiko
import pymongo