Skip to content

Instantly share code, notes, and snippets.

@lmonika

lmonika/(1-2) 3.18.12-gentoo dmesg.txt

Last active August 29, 2015 14:21
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save lmonika/cfe54e933bc91818255e to your computer and use it in GitHub Desktop.
Save lmonika/cfe54e933bc91818255e to your computer and use it in GitHub Desktop.
Download ZIP
Gentoo Linux dmesg (Asus A7N8X-E Socket A Athlon XP 3200+ DDR3GB)
Raw
(1-2) 3.18.12-gentoo dmesg.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.12-gentoo (root@gen2) (gcc version 4.8.4 (Gentoo 4.8.4 p1.5, pie-0.6.1) ) #1 Tue May 19 08:05:31 CEST 2015
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfff3000-0x00000000bfffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.2 present.
[ 0.000000] DMI: ASUSTeK Computer INC. A7N8X-E/A7N8X-E, BIOS ASUS A7N8X-E Deluxe ACPI BIOS Rev 1013 11/12/2004
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xbfff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01d44000, 0x01d44fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F75E0 000014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 0xBFFF3000 00002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0xBFFF3040 000074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 0xBFFF30C0 004561 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0xBFFF0000 000040
[ 0.000000] ACPI: APIC 0xBFFF7640 00006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] 2183MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01d45000, 0x01d45fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0xbffeffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbffeffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0xbffeffff]
[ 0.000000] On node 0 totalpages: 786318
[ 0.000000] free_area_init_node: node 0, pgdat c1c08e40, node_mem_map f5ffe020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4368 pages used for memmap
[ 0.000000] HighMem zone: 559090 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 784542
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-linux-3.18.12-gentoo root=/dev/md1 ro net.ifnames=0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bfff0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 3106148K/3145272K available (8883K kernel code, 531K rwdata, 2980K rodata, 592K init, 548K bss, 39124K reserved, 2236360K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfffe3000 - 0xfffff000 ( 112 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1c1e000 - 0xc1cb2000 ( 592 kB)
.data : 0xc18ad07f - 0xc1c1cf80 (3519 kB)
.text : 0xc1000000 - 0xc18ad07f (8884 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2191.365 MHz processor
[ 0.003002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4382.73 BogoMIPS (lpj=2191365)
[ 0.003142] pid_max: default: 32768 minimum: 301
[ 0.003220] ACPI: Core revision 20140926
[ 0.007056] ACPI: All ACPI Tables successfully acquired
[ 0.007190] ACPI: setting ELCR to 0200 (from 1a20)
[ 0.008027] Security Framework initialized
[ 0.008100] SELinux: Initializing.
[ 0.008175] SELinux: Starting in permissive mode
[ 0.008186] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.008258] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.008623] Initializing cgroup subsys freezer
[ 0.008719] mce: CPU supports 4 MCE banks
[ 0.008795] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.008904] CPU: AMD Athlon(tm) XP 3200+ (fam: 06, model: 0a, stepping: 00)
[ 0.009306] Performance Events: AMD PMU driver.
[ 0.009410] ... version: 0
[ 0.009479] ... bit width: 48
[ 0.009547] ... generic registers: 4
[ 0.009615] ... value mask: 0000ffffffffffff
[ 0.009684] ... max period: 00007fffffffffff
[ 0.009753] ... fixed-purpose events: 0
[ 0.009821] ... event mask: 000000000000000f
[ 0.010422] devtmpfs: initialized
[ 0.010792] PM: Registering ACPI NVS region [mem 0xbfff0000-0xbfff2fff] (12288 bytes)
[ 0.011353] xor: measuring software checksum speed
[ 0.021003] pIII_sse : 5816.000 MB/sec
[ 0.031003] prefetch64-sse: 6360.000 MB/sec
[ 0.031072] xor: using function: prefetch64-sse (6360.000 MB/sec)
[ 0.031205] kworker/u2:0 (12) used greatest stack depth: 7196 bytes left
[ 0.031307] RTC time: 12:16:41, date: 05/20/15
[ 0.031539] NET: Registered protocol family 16
[ 0.031901] cpuidle: using governor ladder
[ 0.031972] cpuidle: using governor menu
[ 0.032098] ACPI: bus type PCI registered
[ 0.064109] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
[ 0.064180] PCI: Using configuration type 1 for base access
[ 0.088028] raid6: mmxx1 1773 MB/s
[ 0.105013] raid6: mmxx2 3062 MB/s
[ 0.122046] raid6: sse1x1 1632 MB/s
[ 0.139028] raid6: sse1x2 2644 MB/s
[ 0.156033] raid6: int32x1 804 MB/s
[ 0.173018] raid6: int32x2 796 MB/s
[ 0.190080] raid6: int32x4 695 MB/s
[ 0.207054] raid6: int32x8 527 MB/s
[ 0.207123] raid6: using algorithm mmxx2 (3062 MB/s)
[ 0.207192] raid6: using intx1 recovery algorithm
[ 0.210486] ACPI: Added _OSI(Module Device)
[ 0.210556] ACPI: Added _OSI(Processor Device)
[ 0.210625] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.210694] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.214716] ACPI: Interpreter enabled
[ 0.214803] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.214984] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.215004] ACPI: Using PIC for interrupt routing
[ 0.215159] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.222566] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.222652] acpi PNP0A03:00: _OSC: OS supports [Segments]
[ 0.222728] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.222886] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.222889] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.222893] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.222896] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.222899] acpi PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
[ 0.222902] PCI: root bus 00: using default resources
[ 0.222905] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.223045] PCI host bridge to bus 0000:00
[ 0.223117] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.223188] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.223260] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.223342] pci 0000:00:00.0: [10de:01e0] type 00 class 0x060000
[ 0.223352] pci 0000:00:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.223371] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
[ 0.223606] pci 0000:00:00.1: [10de:01eb] type 00 class 0x050000
[ 0.223723] pci 0000:00:00.2: [10de:01ee] type 00 class 0x050000
[ 0.223838] pci 0000:00:00.3: [10de:01ed] type 00 class 0x050000
[ 0.223953] pci 0000:00:00.4: [10de:01ec] type 00 class 0x050000
[ 0.224099] pci 0000:00:00.5: [10de:01ef] type 00 class 0x050000
[ 0.224224] pci 0000:00:01.0: [10de:0060] type 00 class 0x060100
[ 0.224392] pci 0000:00:01.1: [10de:0064] type 00 class 0x0c0500
[ 0.224406] pci 0000:00:01.1: reg 0x10: [io 0xe400-0xe41f]
[ 0.224456] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.224586] pci 0000:00:02.0: [10de:0067] type 00 class 0x0c0310
[ 0.224600] pci 0000:00:02.0: reg 0x10: [mem 0xe5086000-0xe5086fff]
[ 0.224650] pci 0000:00:02.0: supports D1 D2
[ 0.224652] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.224716] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.224891] pci 0000:00:02.1: [10de:0067] type 00 class 0x0c0310
[ 0.224906] pci 0000:00:02.1: reg 0x10: [mem 0xe5081000-0xe5081fff]
[ 0.224955] pci 0000:00:02.1: supports D1 D2
[ 0.224958] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.225032] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.225174] pci 0000:00:02.2: [10de:0068] type 00 class 0x0c0320
[ 0.225190] pci 0000:00:02.2: reg 0x10: [mem 0xe5082000-0xe50820ff]
[ 0.225245] pci 0000:00:02.2: supports D1 D2
[ 0.225248] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.225333] pci 0000:00:02.2: System wakeup disabled by ACPI
[ 0.225473] pci 0000:00:04.0: [10de:0066] type 00 class 0x020000
[ 0.225486] pci 0000:00:04.0: reg 0x10: [mem 0xe5085000-0xe5085fff]
[ 0.225495] pci 0000:00:04.0: reg 0x14: [io 0xe800-0xe807]
[ 0.225539] pci 0000:00:04.0: supports D1 D2
[ 0.225541] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.225609] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.225743] pci 0000:00:05.0: [10de:006b] type 00 class 0x040100
[ 0.225756] pci 0000:00:05.0: reg 0x10: [mem 0xe5000000-0xe507ffff]
[ 0.225806] pci 0000:00:05.0: supports D1 D2
[ 0.225917] pci 0000:00:06.0: [10de:006a] type 00 class 0x040100
[ 0.225931] pci 0000:00:06.0: reg 0x10: [io 0xec00-0xecff]
[ 0.225939] pci 0000:00:06.0: reg 0x14: [io 0xe000-0xe07f]
[ 0.225947] pci 0000:00:06.0: reg 0x18: [mem 0xe5080000-0xe5080fff]
[ 0.225986] pci 0000:00:06.0: supports D1 D2
[ 0.226145] pci 0000:00:08.0: [10de:006c] type 01 class 0x060400
[ 0.226232] pci 0000:00:08.0: System wakeup disabled by ACPI
[ 0.226369] pci 0000:00:09.0: [10de:0065] type 00 class 0x01018a
[ 0.226404] pci 0000:00:09.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.226420] pci 0000:00:09.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.226492] pci 0000:00:09.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.226564] pci 0000:00:09.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.226636] pci 0000:00:09.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.226827] pci 0000:00:0d.0: [10de:006e] type 00 class 0x0c0010
[ 0.226841] pci 0000:00:0d.0: reg 0x10: [mem 0xe5083000-0xe50837ff]
[ 0.226849] pci 0000:00:0d.0: reg 0x14: [mem 0xe5084000-0xe508403f]
[ 0.226893] pci 0000:00:0d.0: supports D1 D2
[ 0.226895] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.226958] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.227079] pci 0000:00:1e.0: [10de:01e8] type 01 class 0x060400
[ 0.227251] pci 0000:01:04.0: [11ab:4320] type 00 class 0x020000
[ 0.227272] pci 0000:01:04.0: reg 0x10: [mem 0xe4020000-0xe4023fff]
[ 0.227283] pci 0000:01:04.0: reg 0x14: [io 0xa000-0xa0ff]
[ 0.227328] pci 0000:01:04.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.227356] pci 0000:01:04.0: supports D1 D2
[ 0.227359] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.227485] pci 0000:01:08.0: [11ab:1faa] type 00 class 0x020000
[ 0.227507] pci 0000:01:08.0: reg 0x10: [mem 0xe4000000-0xe400ffff]
[ 0.227519] pci 0000:01:08.0: reg 0x14: [mem 0xe4010000-0xe401ffff]
[ 0.227656] pci 0000:01:09.0: [1033:0035] type 00 class 0x0c0310
[ 0.227674] pci 0000:01:09.0: reg 0x10: [mem 0xe4024000-0xe4024fff]
[ 0.227745] pci 0000:01:09.0: supports D1 D2
[ 0.227748] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.227826] pci 0000:01:09.1: [1033:0035] type 00 class 0x0c0310
[ 0.227845] pci 0000:01:09.1: reg 0x10: [mem 0xe4025000-0xe4025fff]
[ 0.227916] pci 0000:01:09.1: supports D1 D2
[ 0.227918] pci 0000:01:09.1: PME# supported from D0 D1 D2 D3hot
[ 0.228039] pci 0000:01:09.2: [1033:00e0] type 00 class 0x0c0320
[ 0.228057] pci 0000:01:09.2: reg 0x10: [mem 0xe4026000-0xe40260ff]
[ 0.228129] pci 0000:01:09.2: supports D1 D2
[ 0.228131] pci 0000:01:09.2: PME# supported from D0 D1 D2 D3hot
[ 0.228216] pci 0000:01:0b.0: [1095:3112] type 00 class 0x010400
[ 0.228235] pci 0000:01:0b.0: reg 0x10: [io 0xa400-0xa407]
[ 0.228246] pci 0000:01:0b.0: reg 0x14: [io 0xa800-0xa803]
[ 0.228257] pci 0000:01:0b.0: reg 0x18: [io 0xac00-0xac07]
[ 0.228268] pci 0000:01:0b.0: reg 0x1c: [io 0xb000-0xb003]
[ 0.228279] pci 0000:01:0b.0: reg 0x20: [io 0xb400-0xb40f]
[ 0.228290] pci 0000:01:0b.0: reg 0x24: [mem 0xe4027000-0xe40271ff]
[ 0.228301] pci 0000:01:0b.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.228325] pci 0000:01:0b.0: supports D1 D2
[ 0.228402] pci 0000:00:08.0: PCI bridge to [bus 01]
[ 0.228475] pci 0000:00:08.0: bridge window [io 0xa000-0xbfff]
[ 0.228479] pci 0000:00:08.0: bridge window [mem 0xe3000000-0xe4ffffff]
[ 0.228530] pci 0000:03:00.0: [1002:5961] type 00 class 0x030000
[ 0.228546] pci 0000:03:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.228555] pci 0000:03:00.0: reg 0x14: [io 0xd000-0xd0ff]
[ 0.228563] pci 0000:03:00.0: reg 0x18: [mem 0xe2000000-0xe200ffff]
[ 0.228588] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.228612] pci 0000:03:00.0: supports D1 D2
[ 0.228725] pci 0000:03:00.1: [1002:5941] type 00 class 0x038000
[ 0.228737] pci 0000:03:00.1: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[ 0.228744] pci 0000:03:00.1: reg 0x14: [mem 0xe2010000-0xe201ffff]
[ 0.228783] pci 0000:03:00.1: supports D1 D2
[ 0.228868] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.228941] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.228945] pci 0000:00:1e.0: bridge window [mem 0xe1000000-0xe2ffffff]
[ 0.228949] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.228960] pci_bus 0000:00: on NUMA node 0
[ 0.229080] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.229702] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.230257] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.230821] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.231406] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.232121] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.232682] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.233225] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.233783] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.234501] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.235067] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.235686] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.236381] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.236940] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.237496] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.238130] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.238754] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 0.239029] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[ 0.239278] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[ 0.239525] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[ 0.240162] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.240441] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[ 0.241153] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[ 0.241518] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 0.241882] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 0.242273] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[ 0.242637] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 0.242977] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 0.243241] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[ 0.243605] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 0.244107] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 0.244478] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 0.245707] vgaarb: setting as boot device: PCI:0000:03:00.0
[ 0.245780] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.245886] vgaarb: loaded
[ 0.245953] vgaarb: bridge control possible 0000:03:00.0
[ 0.246223] SCSI subsystem initialized
[ 0.246408] libata version 3.00 loaded.
[ 0.246482] ACPI: bus type USB registered
[ 0.246605] usbcore: registered new interface driver usbfs
[ 0.246699] usbcore: registered new interface driver hub
[ 0.246789] usbcore: registered new device driver usb
[ 0.246929] pps_core: LinuxPPS API ver. 1 registered
[ 0.247003] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.247124] PTP clock support registered
[ 0.247358] Advanced Linux Sound Architecture Driver Initialized.
[ 0.247457] PCI: Using ACPI for IRQ routing
[ 0.247552] PCI: pci_cache_line_size set to 32 bytes
[ 0.247609] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.247612] e820: reserve RAM buffer [mem 0xbfff0000-0xbfffffff]
[ 0.247810] Bluetooth: Core ver 2.19
[ 0.247894] NET: Registered protocol family 31
[ 0.248003] Bluetooth: HCI device and connection manager initialized
[ 0.248078] Bluetooth: HCI socket layer initialized
[ 0.248150] Bluetooth: L2CAP socket layer initialized
[ 0.248225] Bluetooth: SCO socket layer initialized
[ 0.248476] NetLabel: Initializing
[ 0.248545] NetLabel: domain hash size = 128
[ 0.248613] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.248699] NetLabel: unlabeled traffic allowed by default
[ 0.248937] Switched to clocksource pit
[ 0.251109] cfg80211: Calling CRDA to update world regulatory domain
[ 0.259542] pnp: PnP ACPI init
[ 0.260036] system 00:00: [io 0x4000-0x407f] has been reserved
[ 0.260133] system 00:00: [io 0x4080-0x40ff] has been reserved
[ 0.260205] system 00:00: [io 0x4400-0x447f] has been reserved
[ 0.260276] system 00:00: [io 0x4480-0x44ff] has been reserved
[ 0.260348] system 00:00: [io 0x4200-0x427f] has been reserved
[ 0.260419] system 00:00: [io 0x4280-0x42ff] has been reserved
[ 0.260492] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.260554] system 00:01: [io 0x5000-0x503f] has been reserved
[ 0.260627] system 00:01: [io 0x5500-0x553f] has been reserved
[ 0.260699] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.260898] system 00:02: [mem 0x000d8800-0x000dbfff] has been reserved
[ 0.260972] system 00:02: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.261045] system 00:02: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.261140] system 00:02: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.261213] system 00:02: [mem 0xbfff0000-0xbfffffff] could not be reserved
[ 0.261285] system 00:02: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.261358] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.261430] system 00:02: [mem 0x00100000-0xbffeffff] could not be reserved
[ 0.261503] system 00:02: [mem 0xfec00000-0xfec00fff] has been reserved
[ 0.261575] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.261648] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.262303] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.262377] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.262482] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.262627] pnp 00:05: [dma 2]
[ 0.262672] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.262928] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.263231] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.263631] pnp 00:08: [dma 3]
[ 0.263743] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.263825] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.264086] pnp 00:0a: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.264304] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.264316] pnp: PnP ACPI: found 12 devices
[ 0.300231] Switched to clocksource acpi_pm
[ 0.300325] pci 0000:00:08.0: BAR 9: assigned [mem 0xe0000000-0xe00fffff pref]
[ 0.300435] pci 0000:01:0b.0: BAR 6: assigned [mem 0xe0000000-0xe007ffff pref]
[ 0.300542] pci 0000:01:04.0: BAR 6: assigned [mem 0xe0080000-0xe009ffff pref]
[ 0.300649] pci 0000:00:08.0: PCI bridge to [bus 01]
[ 0.300720] pci 0000:00:08.0: bridge window [io 0xa000-0xbfff]
[ 0.300795] pci 0000:00:08.0: bridge window [mem 0xe3000000-0xe4ffffff]
[ 0.300869] pci 0000:00:08.0: bridge window [mem 0xe0000000-0xe00fffff pref]
[ 0.300980] pci 0000:03:00.0: BAR 6: assigned [mem 0xe1000000-0xe101ffff pref]
[ 0.301116] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.301188] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.301261] pci 0000:00:1e.0: bridge window [mem 0xe1000000-0xe2ffffff]
[ 0.301334] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.301445] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.301448] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.301451] pci_bus 0000:01: resource 0 [io 0xa000-0xbfff]
[ 0.301454] pci_bus 0000:01: resource 1 [mem 0xe3000000-0xe4ffffff]
[ 0.301456] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe00fffff pref]
[ 0.301459] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.301462] pci_bus 0000:03: resource 1 [mem 0xe1000000-0xe2ffffff]
[ 0.301465] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff pref]
[ 0.301513] NET: Registered protocol family 2
[ 0.301863] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.301975] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.302105] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.302207] TCP: reno registered
[ 0.302277] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.302357] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.302495] NET: Registered protocol family 1
[ 0.302742] RPC: Registered named UNIX socket transport module.
[ 0.302813] RPC: Registered udp transport module.
[ 0.302882] RPC: Registered tcp transport module.
[ 0.302951] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.303268] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 12
[ 0.303340] PCI: setting IRQ 12 as level-triggered
[ 0.377261] ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
[ 0.377333] PCI: setting IRQ 11 as level-triggered
[ 0.451238] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 9
[ 0.451309] PCI: setting IRQ 9 as level-triggered
[ 0.451596] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5
[ 0.451667] PCI: setting IRQ 5 as level-triggered
[ 0.451953] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
[ 0.452327] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 9
[ 0.452519] pci 0000:03:00.0: Video device with shadowed ROM
[ 0.452524] PCI: CLS 32 bytes, default 32
[ 0.452773] microcode: AMD CPU family 0x6 not supported
[ 0.453063] Scanning for low memory corruption every 60 seconds
[ 0.453498] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.453598] audit: initializing netlink subsys (disabled)
[ 0.453687] audit: type=2000 audit(1432124201.452:1): initialized
[ 0.454181] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.456501] kworker/u2:0 (621) used greatest stack depth: 7036 bytes left
[ 0.458229] VFS: Disk quotas dquot_6.5.2
[ 0.458373] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.459545] NFS: Registering the id_resolver key type
[ 0.459631] Key type id_resolver registered
[ 0.459699] Key type id_legacy registered
[ 0.460076] ntfs: driver 2.1.31 [Flags: R/O].
[ 0.460334] fuse init (API version 7.23)
[ 0.460614] msgmni has been set to 1698
[ 0.460785] SELinux: Registering netfilter hooks
[ 0.461989] bounce: pool size: 64 pages
[ 0.462101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.462210] io scheduler noop registered
[ 0.462281] io scheduler deadline registered
[ 0.462412] io scheduler cfq registered (default)
[ 0.462603] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.483316] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.504587] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.505850] Non-volatile memory driver v1.3
[ 0.505930] Linux agpgart interface v0.103
[ 0.506075] agpgart: Detected NVIDIA nForce2 chipset
[ 0.519706] agpgart-nvidia 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 0.520058] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.520169] ACPI: Power Button [PWRB]
[ 0.520318] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.520424] ACPI: Power Button [PWRF]
[ 0.520859] [drm] Initialized drm 1.1.0 20060810
[ 0.520952] [drm] radeon kernel modesetting enabled.
[ 0.521400] [drm] initializing kernel modesetting (RV280 0x1002:0x5961 0x18BC:0x0053).
[ 0.521517] [drm] register mmio base: 0xE2000000
[ 0.521586] [drm] register mmio size: 65536
[ 0.521898] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
[ 0.521977] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
[ 0.522144] radeon 0000:03:00.0: putting AGP V3 device into 8x mode
[ 0.522220] radeon 0000:03:00.0: GTT: 256M 0xC0000000 - 0xCFFFFFFF
[ 0.522294] [drm] Generation 2 PCI interface, using max accessible memory
[ 0.522368] radeon 0000:03:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
[ 0.522482] [drm] Detected VRAM RAM=128M, BAR=128M
[ 0.522552] [drm] RAM width 128bits DDR
[ 0.522778] [TTM] Zone kernel: Available graphics memory: 434894 kiB
[ 0.522851] [TTM] Zone highmem: Available graphics memory: 1553074 kiB
[ 0.522922] [TTM] Initializing pool allocator
[ 0.523042] [drm] radeon: 128M of VRAM memory ready
[ 0.523113] [drm] radeon: 256M of GTT memory ready.
[ 0.524155] radeon 0000:03:00.0: WB disabled
[ 0.524237] radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000000 and cpu addr 0xf8012000
[ 0.524346] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.524417] [drm] Driver supports precise vblank timestamp query.
[ 0.524500] [drm] radeon: irq initialized.
[ 0.524588] [drm] Loading R200 Microcode
[ 0.524853] [drm] radeon: ring at 0x00000000C0001000
[ 0.524943] [drm] ring test succeeded in 0 usecs
[ 0.525333] [drm] ib test succeeded in 0 usecs
[ 0.525840] [drm] No TV DAC info found in BIOS
[ 0.526048] [drm] Radeon Display Connectors
[ 0.526117] [drm] Connector 0:
[ 0.526184] [drm] VGA-1
[ 0.526252] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 0.526322] [drm] Encoders:
[ 0.526389] [drm] CRT1: INTERNAL_DAC1
[ 0.526457] [drm] Connector 1:
[ 0.526524] [drm] DVI-I-1
[ 0.526591] [drm] HPD1
[ 0.526658] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 0.526728] [drm] Encoders:
[ 0.526795] [drm] CRT2: INTERNAL_DAC2
[ 0.526862] [drm] DFP1: INTERNAL_TMDS1
[ 0.526930] [drm] Connector 2:
[ 0.526997] [drm] SVIDEO-1
[ 0.527719] [drm] Encoders:
[ 0.527786] [drm] TV1: INTERNAL_DAC2
[ 0.597225] [drm] fb mappable at 0xD0040000
[ 0.597295] [drm] vram apper at 0xD0000000
[ 0.597363] [drm] size 7057408
[ 0.597430] [drm] fb depth is 24
[ 0.597497] [drm] pitch is 6720
[ 0.597639] fbcon: radeondrmfb (fb0) is primary device
[ 0.712519] Console: switching to colour frame buffer device 210x65
[ 0.741647] radeon 0000:03:00.0: fb0: radeondrmfb frame buffer device
[ 0.741813] radeon 0000:03:00.0: registered panic notifier
[ 0.741960] [drm] Initialized radeon 2.40.0 20080528 for 0000:03:00.0 on minor 0
[ 0.743376] loop: module loaded
[ 0.743771] sata_sil 0000:01:0b.0: version 2.4
[ 0.744499] scsi host0: sata_sil
[ 0.744796] scsi host1: sata_sil
[ 0.744943] ata1: SATA max UDMA/100 mmio m512@0xe4027000 tf 0xe4027080 irq 11
[ 0.745155] ata2: SATA max UDMA/100 mmio m512@0xe4027000 tf 0xe40270c0 irq 11
[ 0.745382] pata_amd 0000:00:09.0: version 0.4.1
[ 0.746398] scsi host2: pata_amd
[ 0.746672] scsi host3: pata_amd
[ 0.746820] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.747002] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.747327] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.747485] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.747659] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.747841] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.748261] skge: 1.14 addr 0xe4020000 irq 5 chip Yukon-Lite rev 7
[ 0.748656] skge 0000:01:04.0 eth0: addr 00:0e:a6:24:8a:1c
[ 0.748823] sky2: driver version 1.30
[ 0.748958] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.749381] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5
[ 0.903348] ata3.00: ATAPI: LITE-ON DVDRW LDW-811S, HS0R, max UDMA/33
[ 0.903523] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c000) ACPI=0x701f (60:600:0x13)
[ 0.909260] ata3.00: configured for UDMA/33
[ 1.051060] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.054483] ata1.00: ATA-8: ST2000DL003-9VT166, CC98, max UDMA/133
[ 1.054645] ata1.00: 3907029168 sectors, multi 16: LBA48
[ 1.060460] ata1.00: configured for UDMA/100
[ 1.060694] scsi 0:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC98 PQ: 0 ANSI: 5
[ 1.061228] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.061489] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.061692] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.061880] sd 0:0:0:0: [sda] Write Protect is off
[ 1.062028] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.062055] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.074334] sda: sda1 sda2 sda3
[ 1.080320] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.264661] forcedeth 0000:00:04.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:0e:a6:24:7e:65
[ 1.270491] forcedeth 0000:00:04.0: timirq lnktim desc-v1
[ 1.276476] Loaded prism54 driver, version 1.2
[ 1.282500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.288598] ehci-pci: EHCI PCI platform driver
[ 1.294760] ehci-pci 0000:00:02.2: EHCI Host Controller
[ 1.300793] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 1.306912] ehci-pci 0000:00:02.2: debug port 1
[ 1.313048] ehci-pci 0000:00:02.2: cache line size of 32 is not supported
[ 1.313057] ehci-pci 0000:00:02.2: irq 9, io mem 0xe5082000
[ 1.325035] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 1.331466] hub 1-0:1.0: USB hub found
[ 1.337737] hub 1-0:1.0: 6 ports detected
[ 1.344192] ehci-pci 0000:01:09.2: EHCI Host Controller
[ 1.350475] ehci-pci 0000:01:09.2: new USB bus registered, assigned bus number 2
[ 1.356876] ehci-pci 0000:01:09.2: irq 9, io mem 0xe4026000
[ 1.369062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.375632] ehci-pci 0000:01:09.2: USB 2.0 started, EHCI 0.95
[ 1.382599] ata2.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[ 1.389222] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.396073] hub 2-0:1.0: USB hub found
[ 1.402920] hub 2-0:1.0: 3 ports detected
[ 1.410039] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.417040] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.425211] ata2.00: configured for UDMA/100
[ 1.432387] scsi 1:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[ 1.439644] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.447252] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.454408] tsc: Refined TSC clocksource calibration: 2191.226 MHz
[ 1.461597] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.468997] mousedev: PS/2 mouse device common for all mice
[ 1.476471] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.483816] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.484546] rtc_cmos 00:04: RTC can wake from S4
[ 1.492086] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.499687] scsi 2:0:0:0: CD-ROM LITE-ON DVDRW LDW-811S HS0R PQ: 0 ANSI: 5
[ 1.507854] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.516084] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram
[ 1.523944] sdb: sdb1 sdb2 sdb3
[ 1.531746] i2c /dev entries driver
[ 1.540139] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.548129] md: linear personality registered for level -1
[ 1.555816] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.563959] md: raid0 personality registered for level 0
[ 1.571904] md: raid1 personality registered for level 1
[ 1.579566] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.587310] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.594982] md: raid10 personality registered for level 10
[ 1.602774] md: raid6 personality registered for level 6
[ 1.610409] md: raid5 personality registered for level 5
[ 1.617962] md: raid4 personality registered for level 4
[ 1.625603] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.625672] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 1.633867] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[ 1.641700] usbcore: registered new interface driver btusb
[ 1.649361] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.657414] usbcore: registered new interface driver usbhid
[ 1.664931] usbhid: USB HID core driver
[ 1.673313] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
[ 1.784523] ata4.00: ATAPI: JLMS XJ-HD166S, DS1E, max UDMA/33
[ 1.792088] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c000) ACPI=0x701f (60:600:0x13)
[ 1.792549] ata4.00: configured for UDMA/33
[ 1.800494] scsi 3:0:0:0: CD-ROM JLMS XJ-HD166S DS1E PQ: 0 ANSI: 5
[ 1.828487] sr 3:0:0:0: [sr1] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.836247] sr 3:0:0:0: Attached scsi CD-ROM sr1
[ 1.836404] sr 3:0:0:0: Attached scsi generic sg3 type 5
[ 1.910035] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 1.995048] snd_intel8x0 0000:00:06.0: intel8x0_measure_ac97_clock: measured 50652 usecs (2456 samples)
[ 2.002774] snd_intel8x0 0000:00:06.0: clocking to 48000
[ 2.011264] Netfilter messages via NETLINK v0.30.
[ 2.019215] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.027449] ctnetlink v0.93: registering with nfnetlink.
[ 2.035387] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.043149] TCP: cubic registered
[ 2.050875] Initializing XFRM netlink socket
[ 2.058877] NET: Registered protocol family 10
[ 2.067165] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.075066] sit: IPv6 over IPv4 tunneling driver
[ 2.083107] NET: Registered protocol family 17
[ 2.091185] Bluetooth: RFCOMM TTY layer initialized
[ 2.099135] Bluetooth: RFCOMM socket layer initialized
[ 2.106861] Bluetooth: RFCOMM ver 1.11
[ 2.114435] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.122038] Bluetooth: BNEP filters: protocol multicast
[ 2.129551] Bluetooth: BNEP socket layer initialized
[ 2.137089] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.144581] Bluetooth: HIDP socket layer initialized
[ 2.151986] lib80211: common routines for IEEE802.11 drivers
[ 2.159280] lib80211_crypt: registered algorithm 'NULL'
[ 2.159284] lib80211_crypt: registered algorithm 'WEP'
[ 2.159287] lib80211_crypt: registered algorithm 'CCMP'
[ 2.159290] lib80211_crypt: registered algorithm 'TKIP'
[ 2.159308] Key type dns_resolver registered
[ 2.166888] registered taskstats version 1
[ 2.174692] Magic number: 15:487:279
[ 2.181834] event_source tracepoint: hash matches
[ 2.188946] tty tty16: hash matches
[ 2.195968] console [netcon0] enabled
[ 2.202864] netconsole: network logging started
[ 2.209853] PM: Hibernation image not present or could not be loaded.
[ 2.209858] ALSA device list:
[ 2.216686] #0: NVidia nForce2 with ALC650F at irq 11
[ 2.223572] md: Waiting for all devices to be available before autodetect
[ 2.230375] md: If you don't use raid, use raid=noautodetect
[ 2.237370] md: Autodetecting RAID arrays.
[ 2.333621] md: Scanned 6 and added 6 devices.
[ 2.340301] md: autorun ...
[ 2.346924] md: considering sdb3 ...
[ 2.353557] md: adding sdb3 ...
[ 2.360112] md: sdb2 has different UUID to sdb3
[ 2.366584] md: sdb1 has different UUID to sdb3
[ 2.372898] md: adding sda3 ...
[ 2.379216] md: sda2 has different UUID to sdb3
[ 2.385496] md: sda1 has different UUID to sdb3
[ 2.391778] md: created md3
[ 2.397813] md: bind<sda3>
[ 2.403889] md: bind<sdb3>
[ 2.409872] md: running: <sdb3><sda3>
[ 2.416113] md/raid1:md3: active with 2 out of 2 mirrors
[ 2.422229] md3: detected capacity change from 0 to 1349710249984
[ 2.428254] md: considering sdb2 ...
[ 2.434163] md: adding sdb2 ...
[ 2.440001] md: sdb1 has different UUID to sdb2
[ 2.445846] md: adding sda2 ...
[ 2.451592] md: sda1 has different UUID to sdb2
[ 2.457511] md: created md2
[ 2.463154] md: bind<sda2>
[ 2.468826] md: bind<sdb2>
[ 2.474313] md: running: <sdb2><sda2>
[ 2.479773] Switched to clocksource tsc
[ 2.485224] md/raid1:md2: active with 2 out of 2 mirrors
[ 2.490619] md2: detected capacity change from 0 to 6442385408
[ 2.495881] md: considering sdb1 ...
[ 2.501056] md: adding sdb1 ...
[ 2.506206] md: adding sda1 ...
[ 2.511368] md: created md1
[ 2.516267] md: bind<sda1>
[ 2.521187] md: bind<sdb1>
[ 2.525935] md: running: <sdb1><sda1>
[ 2.530848] md/raid1:md1: active with 2 out of 2 mirrors
[ 2.535670] md1: detected capacity change from 0 to 644245028864
[ 2.540506] md: ... autorun DONE.
[ 2.575867] md1: unknown partition table
[ 2.582267] EXT3-fs (md1): error: couldn't mount because of unsupported optional features (240)
[ 2.587473] EXT2-fs (md1): error: couldn't mount because of unsupported optional features (240)
[ 2.668964] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.673997] VFS: Mounted root (ext4 filesystem) readonly on device 9:1.
[ 2.679740] Freeing unused kernel memory: 592K (c1c1e000 - c1cb2000)
[ 2.684897] Write protecting the kernel text: 8888k
[ 2.690085] Write protecting the kernel read-only data: 2984k
[ 2.803080] random: nonblocking pool is initialized
[ 3.475764] kbd_mode (1046) used greatest stack depth: 6744 bytes left
[ 3.514966] loadkeys (1047) used greatest stack depth: 6496 bytes left
[ 3.520395] init-early.sh (1045) used greatest stack depth: 6076 bytes left
[ 5.503708] udevd[1226]: starting version 1.10
[ 6.030835] i2c i2c-4: nForce2 SMBus adapter at 0x5000
[ 6.030903] i2c i2c-5: nForce2 SMBus adapter at 0x5500
[ 6.039751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.040209] ohci-pci: OHCI PCI platform driver
[ 6.040391] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 6.040402] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 6.040433] ohci-pci 0000:00:02.0: irq 12, io mem 0xe5086000
[ 6.093397] hub 3-0:1.0: USB hub found
[ 6.093411] hub 3-0:1.0: 3 ports detected
[ 6.093693] ohci-pci 0000:00:02.1: OHCI PCI host controller
[ 6.093704] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 4
[ 6.093736] ohci-pci 0000:00:02.1: irq 11, io mem 0xe5081000
[ 6.147037] hub 4-0:1.0: USB hub found
[ 6.147052] hub 4-0:1.0: 3 ports detected
[ 6.147374] ohci-pci 0000:01:09.0: OHCI PCI host controller
[ 6.147384] ohci-pci 0000:01:09.0: new USB bus registered, assigned bus number 5
[ 6.147421] ohci-pci 0000:01:09.0: irq 5, io mem 0xe4024000
[ 6.723871] hub 5-0:1.0: USB hub found
[ 6.723886] hub 5-0:1.0: 2 ports detected
[ 6.724207] ohci-pci 0000:01:09.1: OHCI PCI host controller
[ 6.724218] ohci-pci 0000:01:09.1: new USB bus registered, assigned bus number 6
[ 6.724256] ohci-pci 0000:01:09.1: irq 11, io mem 0xe4025000
[ 7.286875] hub 6-0:1.0: USB hub found
[ 7.286891] hub 6-0:1.0: 1 port detected
[ 7.388587] usb 3-2: new full-speed USB device number 2 using ohci-pci
[ 7.411750] md2: unknown partition table
[ 7.600006] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/0003:046D:C52B.0001/input/input3
[ 7.600327] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2/input0
[ 7.608924] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/0003:046D:C52B.0002/input/input4
[ 7.609340] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2/input1
[ 7.616430] md3: unknown partition table
[ 7.623063] hid-generic 0003:046D:C52B.0003: hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-2/input2
[ 7.729103] usb 5-1: new full-speed USB device number 2 using ohci-pci
[ 7.881905] udevd[1242]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc00b8, key code 161): Invalid argument
[ 7.881920] udevd[1242]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc0183, key code 226): Invalid argument
[ 7.881928] udevd[1242]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc0184, key code 421): Invalid argument
[ 7.881937] udevd[1242]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc0186, key code 423): Invalid argument
[ 7.881945] udevd[1242]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc018a, key code 155): Invalid argument
[ 7.881952] udevd[1242]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc018e, key code 397): Invalid argument
[ 7.881960] udevd[1242]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc01b6, key code 212): Invalid argument
[ 7.881968] udevd[1242]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc01bc, key code 430): Invalid argument
[ 7.881976] udevd[1242]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc0221, key code 217): Invalid argument
[ 7.881984] udevd[1242]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc0223, key code 172): Invalid argument
[ 7.881991] udevd[1242]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc022d, key code 418): Invalid argument
[ 7.881999] udevd[1242]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc022e, key code 419): Invalid argument
[ 11.512113] udevd (1253) used greatest stack depth: 5896 bytes left
[ 32.087920] EXT4-fs (md1): re-mounted. Opts: (null)
[ 32.411335] Adding 6291388k swap on /dev/md2. Priority:-1 extents:1 across:6291388k
[ 32.645760] EXT4-fs (md3): mounted filesystem with ordered data mode. Opts: (null)
[ 34.260448] ip (1746) used greatest stack depth: 5660 bytes left
[ 38.009557] skge 0000:01:04.0 eth0: enabling interface
[ 38.013247] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 38.013486] ip (2303) used greatest stack depth: 5604 bytes left
[ 40.722470] skge 0000:01:04.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 40.722494] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Raw
(2-2) 3.12.21-gentoo dmesg.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.21-gentoo-r1 (root@gen2) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) ) #14 Sun Aug 10 11:57:23 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfff3000-0x00000000bfffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.2 present.
[ 0.000000] DMI: ASUSTeK Computer INC. A7N8X-E/A7N8X-E, BIOS ASUS A7N8X-E Deluxe ACPI BIOS Rev 1013 11/12/2004
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xbfff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01c6b000, 0x01c6bfff] PGTABLE
[ 0.000000] ACPI: RSDP 000f75e0 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT bfff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP bfff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT bfff30c0 04561 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS bfff0000 00040
[ 0.000000] ACPI: APIC bfff7640 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] 2183MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01c6c000, 0x01c6cfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0xbffeffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbffeffff]
[ 0.000000] On node 0 totalpages: 786318
[ 0.000000] free_area_init_node: node 0, pgdat c1b1d7c0, node_mem_map f5ffe020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4368 pages used for memmap
[ 0.000000] HighMem zone: 559090 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 784542
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-linux-3.12.21-gentoo-r1 root=/dev/md1 ro net.ifnames=0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bfff0)
[ 0.000000] Memory: 3107016K/3145272K available (8186K kernel code, 496K rwdata, 2768K rodata, 552K init, 668K bss, 38256K reserved, 2236360K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfffe2000 - 0xfffff000 ( 116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1b31000 - 0xc1bbb000 ( 552 kB)
.data : 0xc17feda5 - 0xc1b302c0 (3269 kB)
.text : 0xc1000000 - 0xc17feda5 (8187 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2191.413 MHz processor
[ 0.003002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4382.82 BogoMIPS (lpj=2191413)
[ 0.003143] pid_max: default: 32768 minimum: 301
[ 0.003244] Security Framework initialized
[ 0.003318] SELinux: Initializing.
[ 0.003394] SELinux: Starting in permissive mode
[ 0.003404] Mount-cache hash table entries: 512
[ 0.003722] Initializing cgroup subsys freezer
[ 0.003822] mce: CPU supports 4 MCE banks
[ 0.003905] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift: -1
[ 0.004003] CPU: AMD Athlon(tm) XP 3200+ (fam: 06, model: 0a, stepping: 00)
[ 0.004238] ACPI: Core revision 20130725
[ 0.006775] ACPI: All ACPI Tables successfully acquired
[ 0.006909] ACPI: setting ELCR to 0200 (from 1a20)
[ 0.007094] Performance Events: AMD PMU driver.
[ 0.007200] ... version: 0
[ 0.008003] ... bit width: 48
[ 0.008071] ... generic registers: 4
[ 0.008140] ... value mask: 0000ffffffffffff
[ 0.008210] ... max period: 00007fffffffffff
[ 0.008279] ... fixed-purpose events: 0
[ 0.008348] ... event mask: 000000000000000f
[ 0.008776] devtmpfs: initialized
[ 0.009145] PM: Registering ACPI NVS region [mem 0xbfff0000-0xbfff2fff] (12288 bytes)
[ 0.009562] xor: measuring software checksum speed
[ 0.019003] pIII_sse : 5836.000 MB/sec
[ 0.029003] prefetch64-sse: 6368.000 MB/sec
[ 0.029072] xor: using function: prefetch64-sse (6368.000 MB/sec)
[ 0.029163] RTC time: 5:04:24, date: 05/19/15
[ 0.029245] kworker/u2:0 (11) used greatest stack depth: 7452 bytes left
[ 0.029387] NET: Registered protocol family 16
[ 0.029977] cpuidle: using governor ladder
[ 0.030004] cpuidle: using governor menu
[ 0.030142] ACPI: bus type PCI registered
[ 0.062223] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
[ 0.062295] PCI: Using configuration type 1 for base access
[ 0.065023] kworker/u2:0 (84) used greatest stack depth: 7316 bytes left
[ 0.076428] bio: create slab <bio-0> at 0
[ 0.093004] raid6: mmxx1 1812 MB/s
[ 0.110018] raid6: mmxx2 3199 MB/s
[ 0.127024] raid6: sse1x1 1640 MB/s
[ 0.144034] raid6: sse1x2 2566 MB/s
[ 0.161052] raid6: int32x1 800 MB/s
[ 0.178057] raid6: int32x2 746 MB/s
[ 0.195025] raid6: int32x4 664 MB/s
[ 0.212054] raid6: int32x8 746 MB/s
[ 0.212123] raid6: using algorithm mmxx2 (3199 MB/s)
[ 0.212193] raid6: using intx1 recovery algorithm
[ 0.212374] ACPI: Added _OSI(Module Device)
[ 0.212445] ACPI: Added _OSI(Processor Device)
[ 0.212514] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.212584] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.213271] ACPI: EC: Look up EC in DSDT
[ 0.216498] ACPI: Interpreter enabled
[ 0.216584] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.216764] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.216834] ACPI: Using PIC for interrupt routing
[ 0.217007] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.217226] ACPI: No dock devices found.
[ 0.227682] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.227760] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.227952] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.227956] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.227959] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.227962] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.227965] acpi PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
[ 0.227968] PCI: root bus 00: using default resources
[ 0.227971] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.228071] PCI host bridge to bus 0000:00
[ 0.228145] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.228216] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.228288] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.228372] pci 0000:00:00.0: [10de:01e0] type 00 class 0x060000
[ 0.228380] pci 0000:00:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.228394] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
[ 0.228607] pci 0000:00:00.1: [10de:01eb] type 00 class 0x050000
[ 0.228758] pci 0000:00:00.2: [10de:01ee] type 00 class 0x050000
[ 0.228898] pci 0000:00:00.3: [10de:01ed] type 00 class 0x050000
[ 0.229135] pci 0000:00:00.4: [10de:01ec] type 00 class 0x050000
[ 0.229281] pci 0000:00:00.5: [10de:01ef] type 00 class 0x050000
[ 0.229427] pci 0000:00:01.0: [10de:0060] type 00 class 0x060100
[ 0.229621] pci 0000:00:01.1: [10de:0064] type 00 class 0x0c0500
[ 0.229636] pci 0000:00:01.1: reg 0x10: [io 0xe400-0xe41f]
[ 0.229682] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.229827] pci 0000:00:02.0: [10de:0067] type 00 class 0x0c0310
[ 0.229841] pci 0000:00:02.0: reg 0x10: [mem 0xe5086000-0xe5086fff]
[ 0.229888] pci 0000:00:02.0: supports D1 D2
[ 0.229890] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.229962] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.230084] pci 0000:00:02.1: [10de:0067] type 00 class 0x0c0310
[ 0.230098] pci 0000:00:02.1: reg 0x10: [mem 0xe5081000-0xe5081fff]
[ 0.230144] pci 0000:00:02.1: supports D1 D2
[ 0.230147] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.230218] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.230368] pci 0000:00:02.2: [10de:0068] type 00 class 0x0c0320
[ 0.230384] pci 0000:00:02.2: reg 0x10: [mem 0xe5082000-0xe50820ff]
[ 0.230435] pci 0000:00:02.2: supports D1 D2
[ 0.230438] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.230529] pci 0000:00:02.2: System wakeup disabled by ACPI
[ 0.230684] pci 0000:00:04.0: [10de:0066] type 00 class 0x020000
[ 0.230698] pci 0000:00:04.0: reg 0x10: [mem 0xe5085000-0xe5085fff]
[ 0.230706] pci 0000:00:04.0: reg 0x14: [io 0xe800-0xe807]
[ 0.230747] pci 0000:00:04.0: supports D1 D2
[ 0.230750] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.230821] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.231017] pci 0000:00:05.0: [10de:006b] type 00 class 0x040100
[ 0.231031] pci 0000:00:05.0: reg 0x10: [mem 0xe5000000-0xe507ffff]
[ 0.231077] pci 0000:00:05.0: supports D1 D2
[ 0.231212] pci 0000:00:06.0: [10de:006a] type 00 class 0x040100
[ 0.231226] pci 0000:00:06.0: reg 0x10: [io 0xec00-0xecff]
[ 0.231234] pci 0000:00:06.0: reg 0x14: [io 0xe000-0xe07f]
[ 0.231242] pci 0000:00:06.0: reg 0x18: [mem 0xe5080000-0xe5080fff]
[ 0.231277] pci 0000:00:06.0: supports D1 D2
[ 0.231415] pci 0000:00:08.0: [10de:006c] type 01 class 0x060400
[ 0.231505] pci 0000:00:08.0: System wakeup disabled by ACPI
[ 0.231654] pci 0000:00:09.0: [10de:0065] type 00 class 0x01018a
[ 0.231689] pci 0000:00:09.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.231853] pci 0000:00:0d.0: [10de:006e] type 00 class 0x0c0010
[ 0.231868] pci 0000:00:0d.0: reg 0x10: [mem 0xe5083000-0xe50837ff]
[ 0.231876] pci 0000:00:0d.0: reg 0x14: [mem 0xe5084000-0xe508403f]
[ 0.231917] pci 0000:00:0d.0: supports D1 D2
[ 0.231919] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.231990] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.232099] pci 0000:00:1e.0: [10de:01e8] type 01 class 0x060400
[ 0.232324] pci 0000:01:04.0: [11ab:4320] type 00 class 0x020000
[ 0.232346] pci 0000:01:04.0: reg 0x10: [mem 0xe4020000-0xe4023fff]
[ 0.232357] pci 0000:01:04.0: reg 0x14: [io 0xa000-0xa0ff]
[ 0.232402] pci 0000:01:04.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.232425] pci 0000:01:04.0: supports D1 D2
[ 0.232428] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.232519] pci 0000:01:08.0: [11ab:1faa] type 00 class 0x020000
[ 0.232540] pci 0000:01:08.0: reg 0x10: [mem 0xe4000000-0xe400ffff]
[ 0.232552] pci 0000:01:08.0: reg 0x14: [mem 0xe4010000-0xe401ffff]
[ 0.232700] pci 0000:01:09.0: [1033:0035] type 00 class 0x0c0310
[ 0.232719] pci 0000:01:09.0: reg 0x10: [mem 0xe4024000-0xe4024fff]
[ 0.232786] pci 0000:01:09.0: supports D1 D2
[ 0.232788] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.232876] pci 0000:01:09.1: [1033:0035] type 00 class 0x0c0310
[ 0.232895] pci 0000:01:09.1: reg 0x10: [mem 0xe4025000-0xe4025fff]
[ 0.233039] pci 0000:01:09.1: supports D1 D2
[ 0.233042] pci 0000:01:09.1: PME# supported from D0 D1 D2 D3hot
[ 0.233132] pci 0000:01:09.2: [1033:00e0] type 00 class 0x0c0320
[ 0.233151] pci 0000:01:09.2: reg 0x10: [mem 0xe4026000-0xe40260ff]
[ 0.233218] pci 0000:01:09.2: supports D1 D2
[ 0.233220] pci 0000:01:09.2: PME# supported from D0 D1 D2 D3hot
[ 0.233315] pci 0000:01:0b.0: [1095:3112] type 00 class 0x010400
[ 0.233334] pci 0000:01:0b.0: reg 0x10: [io 0xa400-0xa407]
[ 0.233346] pci 0000:01:0b.0: reg 0x14: [io 0xa800-0xa803]
[ 0.233357] pci 0000:01:0b.0: reg 0x18: [io 0xac00-0xac07]
[ 0.233368] pci 0000:01:0b.0: reg 0x1c: [io 0xb000-0xb003]
[ 0.233379] pci 0000:01:0b.0: reg 0x20: [io 0xb400-0xb40f]
[ 0.233390] pci 0000:01:0b.0: reg 0x24: [mem 0xe4027000-0xe40271ff]
[ 0.233401] pci 0000:01:0b.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.233420] pci 0000:01:0b.0: supports D1 D2
[ 0.233511] pci 0000:00:08.0: PCI bridge to [bus 01]
[ 0.233585] pci 0000:00:08.0: bridge window [io 0xa000-0xbfff]
[ 0.233590] pci 0000:00:08.0: bridge window [mem 0xe3000000-0xe4ffffff]
[ 0.233668] pci 0000:03:00.0: [1002:5961] type 00 class 0x030000
[ 0.233684] pci 0000:03:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.233692] pci 0000:03:00.0: reg 0x14: [io 0xd000-0xd0ff]
[ 0.233701] pci 0000:03:00.0: reg 0x18: [mem 0xe2000000-0xe200ffff]
[ 0.233726] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.233745] pci 0000:03:00.0: supports D1 D2
[ 0.233826] pci 0000:03:00.1: [1002:5941] type 00 class 0x038000
[ 0.233839] pci 0000:03:00.1: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[ 0.233846] pci 0000:03:00.1: reg 0x14: [mem 0xe2010000-0xe201ffff]
[ 0.233879] pci 0000:03:00.1: supports D1 D2
[ 0.233980] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.234006] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.234010] pci 0000:00:1e.0: bridge window [mem 0xe1000000-0xe2ffffff]
[ 0.234014] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.234024] pci_bus 0000:00: on NUMA node 0
[ 0.234140] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.234761] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.235377] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.235935] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.236494] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.237148] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.237707] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.238284] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.238841] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.239530] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.240065] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.240685] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.241289] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.241846] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.242404] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.243055] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.243678] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 0.243925] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[ 0.244124] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[ 0.244340] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[ 0.244555] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.244831] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 0.245182] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 0.245516] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 0.245849] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
[ 0.246847] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 0.247180] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 0.247519] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[ 0.247761] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 0.248087] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0
[ 0.248420] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 0.248784] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 0.249713] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.249746] Found 1 acpi root devices
[ 0.249963] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.250003] vgaarb: loaded
[ 0.250070] vgaarb: bridge control possible 0000:03:00.0
[ 0.250384] SCSI subsystem initialized
[ 0.250610] libata version 3.00 loaded.
[ 0.250747] ACPI: bus type USB registered
[ 0.251022] usbcore: registered new interface driver usbfs
[ 0.251144] usbcore: registered new interface driver hub
[ 0.251273] usbcore: registered new device driver usb
[ 0.251520] pps_core: LinuxPPS API ver. 1 registered
[ 0.251591] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.251737] PTP clock support registered
[ 0.252035] Advanced Linux Sound Architecture Driver Initialized.
[ 0.252108] PCI: Using ACPI for IRQ routing
[ 0.252203] PCI: pci_cache_line_size set to 32 bytes
[ 0.252259] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.252262] e820: reserve RAM buffer [mem 0xbfff0000-0xbfffffff]
[ 0.252503] Bluetooth: Core ver 2.16
[ 0.252619] NET: Registered protocol family 31
[ 0.252690] Bluetooth: HCI device and connection manager initialized
[ 0.252764] Bluetooth: HCI socket layer initialized
[ 0.252835] Bluetooth: L2CAP socket layer initialized
[ 0.252909] Bluetooth: SCO socket layer initialized
[ 0.253162] cfg80211: Calling CRDA to update world regulatory domain
[ 0.253409] NetLabel: Initializing
[ 0.253478] NetLabel: domain hash size = 128
[ 0.253547] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.253630] NetLabel: unlabeled traffic allowed by default
[ 0.253902] Switched to clocksource pit
[ 0.259664] kworker/u2:0 (497) used greatest stack depth: 6980 bytes left
[ 0.264907] pnp: PnP ACPI init
[ 0.264982] ACPI: bus type PNP registered
[ 0.265438] system 00:00: [io 0x4000-0x407f] has been reserved
[ 0.265512] system 00:00: [io 0x4080-0x40ff] has been reserved
[ 0.265585] system 00:00: [io 0x4400-0x447f] has been reserved
[ 0.265656] system 00:00: [io 0x4480-0x44ff] has been reserved
[ 0.265728] system 00:00: [io 0x4200-0x427f] has been reserved
[ 0.265800] system 00:00: [io 0x4280-0x42ff] has been reserved
[ 0.265874] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265962] system 00:01: [io 0x5000-0x503f] has been reserved
[ 0.266036] system 00:01: [io 0x5500-0x553f] has been reserved
[ 0.266131] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.266378] system 00:02: [mem 0x000d8800-0x000dbfff] has been reserved
[ 0.266453] system 00:02: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.266526] system 00:02: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.266599] system 00:02: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.266673] system 00:02: [mem 0xbfff0000-0xbfffffff] could not be reserved
[ 0.266746] system 00:02: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.266819] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.266892] system 00:02: [mem 0x00100000-0xbffeffff] could not be reserved
[ 0.266965] system 00:02: [mem 0xfec00000-0xfec00fff] has been reserved
[ 0.267038] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.267133] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.267745] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.267820] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267838] pnp 00:04: [dma 4]
[ 0.267910] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.267995] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.268077] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.268191] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.268321] pnp 00:08: [dma 2]
[ 0.268410] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.268698] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.268998] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.269401] pnp 00:0b: [dma 3]
[ 0.269509] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.269631] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.269905] pnp 00:0d: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.270172] pnp 00:0e: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.270181] pnp: PnP ACPI: found 15 devices
[ 0.270251] ACPI: bus type PNP unregistered
[ 0.304994] Switched to clocksource acpi_pm
[ 0.305084] pci 0000:00:08.0: BAR 9: assigned [mem 0xe0000000-0xe00fffff pref]
[ 0.305225] pci 0000:01:0b.0: BAR 6: assigned [mem 0xe0000000-0xe007ffff pref]
[ 0.305334] pci 0000:01:04.0: BAR 6: assigned [mem 0xe0080000-0xe009ffff pref]
[ 0.305441] pci 0000:00:08.0: PCI bridge to [bus 01]
[ 0.305512] pci 0000:00:08.0: bridge window [io 0xa000-0xbfff]
[ 0.305587] pci 0000:00:08.0: bridge window [mem 0xe3000000-0xe4ffffff]
[ 0.305662] pci 0000:00:08.0: bridge window [mem 0xe0000000-0xe00fffff pref]
[ 0.305773] pci 0000:03:00.0: BAR 6: assigned [mem 0xe1000000-0xe101ffff pref]
[ 0.305880] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.305951] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.306044] pci 0000:00:1e.0: bridge window [mem 0xe1000000-0xe2ffffff]
[ 0.306118] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.306229] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.306232] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.306235] pci_bus 0000:01: resource 0 [io 0xa000-0xbfff]
[ 0.306237] pci_bus 0000:01: resource 1 [mem 0xe3000000-0xe4ffffff]
[ 0.306240] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe00fffff pref]
[ 0.306243] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.306246] pci_bus 0000:03: resource 1 [mem 0xe1000000-0xe2ffffff]
[ 0.306249] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff pref]
[ 0.306299] NET: Registered protocol family 2
[ 0.306534] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.306681] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.306803] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.306904] TCP: reno registered
[ 0.306973] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.307070] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.307212] NET: Registered protocol family 1
[ 0.307372] RPC: Registered named UNIX socket transport module.
[ 0.307443] RPC: Registered udp transport module.
[ 0.307512] RPC: Registered tcp transport module.
[ 0.307582] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.307862] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 12
[ 0.307935] PCI: setting IRQ 12 as level-triggered
[ 0.382244] ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
[ 0.382317] PCI: setting IRQ 11 as level-triggered
[ 0.456241] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 9
[ 0.456313] PCI: setting IRQ 9 as level-triggered
[ 0.456417] pci 0000:00:08.0: setting latency timer to 64
[ 0.456596] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5
[ 0.456668] PCI: setting IRQ 5 as level-triggered
[ 0.456941] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
[ 0.457305] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 9
[ 0.457488] pci 0000:03:00.0: Boot video device
[ 0.457494] PCI: CLS 32 bytes, default 32
[ 0.458002] microcode: AMD CPU family 0x6 not supported
[ 0.458095] Scanning for low memory corruption every 60 seconds
[ 0.458745] audit: initializing netlink socket (disabled)
[ 0.458829] type=2000 audit(1432011864.458:1): initialized
[ 0.487075] bounce pool size: 64 pages
[ 0.487152] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.491322] VFS: Disk quotas dquot_6.5.2
[ 0.491461] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.492841] NFS: Registering the id_resolver key type
[ 0.492930] Key type id_resolver registered
[ 0.492999] Key type id_legacy registered
[ 0.493346] NTFS driver 2.1.30 [Flags: R/O].
[ 0.493648] fuse init (API version 7.22)
[ 0.493983] msgmni has been set to 1700
[ 0.494176] SELinux: Registering netfilter hooks
[ 0.494787] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.494896] io scheduler noop registered
[ 0.494965] io scheduler deadline registered
[ 0.495193] io scheduler cfq registered (default)
[ 0.495405] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.516138] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.536898] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.537798] Non-volatile memory driver v1.3
[ 0.537874] Linux agpgart interface v0.103
[ 0.538410] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.538523] ACPI: Power Button [PWRB]
[ 0.538687] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.538796] ACPI: Power Button [PWRF]
[ 0.539347] [drm] Initialized drm 1.1.0 20060810
[ 0.539496] [drm] radeon kernel modesetting enabled.
[ 0.539952] [drm] initializing kernel modesetting (RV280 0x1002:0x5961 0x18BC:0x0053).
[ 0.540099] [drm] register mmio base: 0xE2000000
[ 0.540168] [drm] register mmio size: 65536
[ 0.540508] [drm:radeon_agp_init] *ERROR* Unable to acquire AGP: -19
[ 0.540581] [drm] Forcing AGP to PCI mode
[ 0.540652] [drm] Generation 2 PCI interface, using max accessible memory
[ 0.540728] radeon 0000:03:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
[ 0.540837] radeon 0000:03:00.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[ 0.540948] [drm] Detected VRAM RAM=128M, BAR=128M
[ 0.541039] [drm] RAM width 128bits DDR
[ 0.541161] [TTM] Zone kernel: Available graphics memory: 435328 kiB
[ 0.541233] [TTM] Zone highmem: Available graphics memory: 1553508 kiB
[ 0.541304] [TTM] Initializing pool allocator
[ 0.541398] [drm] radeon: 128M of VRAM memory ready
[ 0.541468] [drm] radeon: 512M of GTT memory ready.
[ 0.541549] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.544645] [drm] PCI GART of 512M enabled (table at 0x0000000000100000).
[ 0.544766] radeon 0000:03:00.0: WB disabled
[ 0.544839] radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xc0072000
[ 0.544949] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.545048] [drm] Driver supports precise vblank timestamp query.
[ 0.545142] [drm] radeon: irq initialized.
[ 0.545233] [drm] Loading R200 Microcode
[ 0.545477] [drm] radeon: ring at 0x00000000B0001000
[ 0.545571] [drm] ring test succeeded in 1 usecs
[ 0.545808] [drm] ib test succeeded in 0 usecs
[ 0.546385] [drm] No TV DAC info found in BIOS
[ 0.546704] [drm] Radeon Display Connectors
[ 0.546774] [drm] Connector 0:
[ 0.546841] [drm] VGA-1
[ 0.546910] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 0.546980] [drm] Encoders:
[ 0.547068] [drm] CRT1: INTERNAL_DAC1
[ 0.547137] [drm] Connector 1:
[ 0.547204] [drm] DVI-I-1
[ 0.547271] [drm] HPD1
[ 0.547339] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 0.547409] [drm] Encoders:
[ 0.547476] [drm] CRT2: INTERNAL_DAC2
[ 0.547545] [drm] DFP1: INTERNAL_TMDS1
[ 0.547613] [drm] Connector 2:
[ 0.547681] [drm] SVIDEO-1
[ 0.547748] [drm] Encoders:
[ 0.547815] [drm] TV1: INTERNAL_DAC2
[ 0.616793] [drm] fb mappable at 0xD0040000
[ 0.616863] [drm] vram apper at 0xD0000000
[ 0.616931] [drm] size 7057408
[ 0.617653] [drm] fb depth is 24
[ 0.617720] [drm] pitch is 6720
[ 0.617864] fbcon: radeondrmfb (fb0) is primary device
[ 0.730447] Console: switching to colour frame buffer device 210x65
[ 0.759187] radeon 0000:03:00.0: fb0: radeondrmfb frame buffer device
[ 0.759353] radeon 0000:03:00.0: registered panic notifier
[ 0.759498] [drm] Initialized radeon 2.34.0 20080528 for 0000:03:00.0 on minor 0
[ 0.761151] loop: module loaded
[ 0.761760] sata_sil 0000:01:0b.0: version 2.4
[ 0.762417] scsi0 : sata_sil
[ 0.762635] scsi1 : sata_sil
[ 0.762813] ata1: SATA max UDMA/100 mmio m512@0xe4027000 tf 0xe4027080 irq 11
[ 0.763001] ata2: SATA max UDMA/100 mmio m512@0xe4027000 tf 0xe40270c0 irq 11
[ 0.763331] pata_amd 0000:00:09.0: version 0.4.1
[ 0.763371] pata_amd 0000:00:09.0: setting latency timer to 64
[ 0.764399] scsi2 : pata_amd
[ 0.764607] scsi3 : pata_amd
[ 0.764778] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.764959] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.765544] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.765702] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.765901] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.766105] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.766477] skge: 1.14 addr 0xe4020000 irq 5 chip Yukon-Lite rev 7
[ 0.766909] skge 0000:01:04.0 eth0: addr 00:0e:a6:24:8a:1c
[ 0.767127] sky2: driver version 1.30
[ 0.767295] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.767653] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5
[ 0.767805] forcedeth 0000:00:04.0: setting latency timer to 64
[ 0.919352] ata3.00: ATAPI: LITE-ON DVDRW LDW-811S, HS0R, max UDMA/33
[ 0.919543] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c000) ACPI=0x701f (60:600:0x13)
[ 0.925265] ata3.00: configured for UDMA/33
[ 1.068065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.071487] ata1.00: ATA-8: ST2000DL003-9VT166, CC98, max UDMA/133
[ 1.071648] ata1.00: 3907029168 sectors, multi 16: LBA48
[ 1.077463] ata1.00: configured for UDMA/100
[ 1.077691] scsi 0:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC98 PQ: 0 ANSI: 5
[ 1.078199] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.078401] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.078607] sd 0:0:0:0: [sda] Write Protect is off
[ 1.078732] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.078765] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.079529] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.094097] sda: sda1 sda2 sda3
[ 1.100094] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.289709] forcedeth 0000:00:04.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:0e:a6:24:7e:65
[ 1.295477] forcedeth 0000:00:04.0: timirq lnktim desc-v1
[ 1.301378] Loaded prism54 driver, version 1.2
[ 1.307370] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.313329] ehci-pci: EHCI PCI platform driver
[ 1.319437] ehci-pci 0000:00:02.2: setting latency timer to 64
[ 1.319451] ehci-pci 0000:00:02.2: EHCI Host Controller
[ 1.325437] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 1.331508] ehci-pci 0000:00:02.2: debug port 1
[ 1.337615] ehci-pci 0000:00:02.2: cache line size of 32 is not supported
[ 1.337624] ehci-pci 0000:00:02.2: irq 9, io mem 0xe5082000
[ 1.349040] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 1.355435] hub 1-0:1.0: USB hub found
[ 1.361587] hub 1-0:1.0: 6 ports detected
[ 1.367921] ehci-pci 0000:01:09.2: EHCI Host Controller
[ 1.374161] ehci-pci 0000:01:09.2: new USB bus registered, assigned bus number 2
[ 1.380509] ehci-pci 0000:01:09.2: irq 9, io mem 0xe4026000
[ 1.386849] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.396515] ata2.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[ 1.402964] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.409592] ehci-pci 0000:01:09.2: USB 2.0 started, EHCI 0.95
[ 1.416529] hub 2-0:1.0: USB hub found
[ 1.423468] hub 2-0:1.0: 3 ports detected
[ 1.430181] ata2.00: configured for UDMA/100
[ 1.437074] scsi 1:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[ 1.444330] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.451234] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.458675] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.465792] tsc: Refined TSC clocksource calibration: 2191.225 MHz
[ 1.472998] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.480147] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.487206] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.488325] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.495497] scsi 2:0:0:0: CD-ROM LITE-ON DVDRW LDW-811S HS0R PQ: 0 ANSI: 5
[ 1.502776] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.510642] mousedev: PS/2 mouse device common for all mice
[ 1.518957] rtc_cmos 00:05: RTC can wake from S4
[ 1.526526] sdb: sdb1 sdb2 sdb3
[ 1.533910] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.541507] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.549425] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.557369] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.564954] rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram
[ 1.572696] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.572942] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 1.580728] i2c /dev entries driver
[ 1.588806] md: linear personality registered for level -1
[ 1.596351] md: raid0 personality registered for level 0
[ 1.603845] md: raid1 personality registered for level 1
[ 1.611231] md: raid10 personality registered for level 10
[ 1.618700] md: raid6 personality registered for level 6
[ 1.626038] md: raid5 personality registered for level 5
[ 1.633249] md: raid4 personality registered for level 4
[ 1.640493] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.647950] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[ 1.655516] usbcore: registered new interface driver btusb
[ 1.662970] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.671246] usbcore: registered new interface driver usbhid
[ 1.678540] usbhid: USB HID core driver
[ 1.686202] Netfilter messages via NETLINK v0.30.
[ 1.693613] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.701172] ctnetlink v0.93: registering with nfnetlink.
[ 1.708632] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.715977] TCP: cubic registered
[ 1.723181] Initializing XFRM netlink socket
[ 1.730689] NET: Registered protocol family 10
[ 1.738212] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.745854] ata4.00: ATAPI: JLMS XJ-HD166S, DS1E, max UDMA/33
[ 1.753024] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c000) ACPI=0x701f (60:600:0x13)
[ 1.753502] ata4.00: configured for UDMA/33
[ 1.760756] sit: IPv6 over IPv4 tunneling driver
[ 1.768239] scsi 3:0:0:0: CD-ROM JLMS XJ-HD166S DS1E PQ: 0 ANSI: 5
[ 1.775642] NET: Registered protocol family 17
[ 1.783159] Bluetooth: RFCOMM TTY layer initialized
[ 1.790583] Bluetooth: RFCOMM socket layer initialized
[ 1.797861] Bluetooth: RFCOMM ver 1.11
[ 1.805091] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.812326] Bluetooth: BNEP filters: protocol multicast
[ 1.819627] Bluetooth: BNEP socket layer initialized
[ 1.826830] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.833991] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.841237] Bluetooth: HIDP socket layer initialized
[ 1.848564] sr 3:0:0:0: Attached scsi CD-ROM sr1
[ 1.848710] lib80211: common routines for IEEE802.11 drivers
[ 1.856076] sr 3:0:0:0: Attached scsi generic sg3 type 5
[ 1.863277] lib80211_crypt: registered algorithm 'NULL'
[ 1.863280] lib80211_crypt: registered algorithm 'WEP'
[ 1.863281] lib80211_crypt: registered algorithm 'CCMP'
[ 1.863283] lib80211_crypt: registered algorithm 'TKIP'
[ 1.863297] Key type dns_resolver registered
[ 1.870967] registered taskstats version 1
[ 1.878464] Magic number: 15:461:62
[ 1.885533] hash matches drivers/base/power/main.c:519
[ 1.892927] console [netcon0] enabled
[ 1.899861] netconsole: network logging started
[ 1.906763] PM: Hibernation image not present or could not be loaded.
[ 1.906765] ALSA device list:
[ 1.913472] No soundcards found.
[ 1.920181] md: Waiting for all devices to be available before autodetect
[ 1.926988] md: If you don't use raid, use raid=noautodetect
[ 1.934024] md: Autodetecting RAID arrays.
[ 1.943049] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 2.026067] md: Scanned 6 and added 6 devices.
[ 2.032679] md: autorun ...
[ 2.039224] md: considering sdb3 ...
[ 2.045753] md: adding sdb3 ...
[ 2.052183] md: sdb2 has different UUID to sdb3
[ 2.058596] md: sdb1 has different UUID to sdb3
[ 2.064891] md: adding sda3 ...
[ 2.071092] md: sda2 has different UUID to sdb3
[ 2.077280] md: sda1 has different UUID to sdb3
[ 2.083541] md: created md3
[ 2.089545] md: bind<sda3>
[ 2.095496] md: bind<sdb3>
[ 2.101320] md: running: <sdb3><sda3>
[ 2.107413] md/raid1:md3: active with 2 out of 2 mirrors
[ 2.113390] md3: detected capacity change from 0 to 1349710249984
[ 2.119419] md: considering sdb2 ...
[ 2.125459] md: adding sdb2 ...
[ 2.131493] md: sdb1 has different UUID to sdb2
[ 2.137454] md: adding sda2 ...
[ 2.143258] md: sda1 has different UUID to sdb2
[ 2.149151] md: created md2
[ 2.154787] md: bind<sda2>
[ 2.160378] md: bind<sdb2>
[ 2.165930] md: running: <sdb2><sda2>
[ 2.171661] md/raid1:md2: active with 2 out of 2 mirrors
[ 2.177247] md2: detected capacity change from 0 to 6442385408
[ 2.182745] md: considering sdb1 ...
[ 2.188155] md: adding sdb1 ...
[ 2.193541] md: adding sda1 ...
[ 2.199002] md: created md1
[ 2.204223] md: bind<sda1>
[ 2.209428] md: bind<sdb1>
[ 2.214481] md: running: <sdb1><sda1>
[ 2.219686] md/raid1:md1: active with 2 out of 2 mirrors
[ 2.224800] md1: detected capacity change from 0 to 644245028864
[ 2.229918] md: ... autorun DONE.
[ 2.262325] md1: unknown partition table
[ 2.268815] EXT3-fs (md1): error: couldn't mount because of unsupported optional features (240)
[ 2.274280] EXT2-fs (md1): error: couldn't mount because of unsupported optional features (240)
[ 2.355561] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.360824] VFS: Mounted root (ext4 filesystem) readonly on device 9:1.
[ 2.366846] Freeing unused kernel memory: 552K (c1b31000 - c1bbb000)
[ 2.372330] Write protecting the kernel text: 8188k
[ 2.377717] Write protecting the kernel read-only data: 2772k
[ 2.480149] Switched to clocksource tsc
[ 3.222792] kbd_mode (1002) used greatest stack depth: 6592 bytes left
[ 3.262172] loadkeys (1003) used greatest stack depth: 6368 bytes left
[ 3.267653] init-early.sh (1001) used greatest stack depth: 6008 bytes left
[ 5.291095] udevd[1180]: starting version 1.10
[ 5.902421] i2c i2c-4: nForce2 SMBus adapter at 0x5000
[ 5.902473] i2c i2c-5: nForce2 SMBus adapter at 0x5500
[ 5.916904] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.918187] ohci-pci: OHCI PCI platform driver
[ 5.918359] ohci-pci 0000:00:02.0: setting latency timer to 64
[ 5.918364] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 5.918373] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 5.918400] ohci-pci 0000:00:02.0: irq 12, io mem 0xe5086000
[ 5.971290] hub 3-0:1.0: USB hub found
[ 5.971306] hub 3-0:1.0: 3 ports detected
[ 5.971648] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
[ 5.971686] snd_intel8x0 0000:00:06.0: setting latency timer to 64
[ 6.290042] intel8x0_measure_ac97_clock: measured 50697 usecs (2464 samples)
[ 6.290048] intel8x0: clocking to 47405
[ 6.292361] ohci-pci 0000:00:02.1: setting latency timer to 64
[ 6.292368] ohci-pci 0000:00:02.1: OHCI PCI host controller
[ 6.292376] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 4
[ 6.292396] ohci-pci 0000:00:02.1: irq 11, io mem 0xe5081000
[ 6.328069] usb 3-2: new full-speed USB device number 2 using ohci-pci
[ 6.345239] hub 4-0:1.0: USB hub found
[ 6.345254] hub 4-0:1.0: 3 ports detected
[ 6.345545] ohci-pci 0000:01:09.0: OHCI PCI host controller
[ 6.345554] ohci-pci 0000:01:09.0: new USB bus registered, assigned bus number 5
[ 6.345577] ohci-pci 0000:01:09.0: irq 5, io mem 0xe4024000
[ 6.980129] md2: unknown partition table
[ 6.990843] md3: unknown partition table
[ 7.010500] hub 5-0:1.0: USB hub found
[ 7.011322] hub 5-0:1.0: 2 ports detected
[ 7.012664] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input3
[ 7.013100] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2/input0
[ 7.013545] ohci-pci 0000:01:09.1: OHCI PCI host controller
[ 7.013551] ohci-pci 0000:01:09.1: new USB bus registered, assigned bus number 6
[ 7.013575] ohci-pci 0000:01:09.1: irq 11, io mem 0xe4025000
[ 7.021963] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/input/input4
[ 7.022451] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2/input1
[ 7.033042] hid-generic 0003:046D:C52B.0003: hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-2/input2
[ 7.574857] hub 6-0:1.0: USB hub found
[ 7.574980] hub 6-0:1.0: 1 port detected
[ 7.704593] udevd[1202]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc00b8, key code 161): Invalid argument
[ 7.704609] udevd[1202]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc0183, key code 226): Invalid argument
[ 7.704619] udevd[1202]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc0184, key code 421): Invalid argument
[ 7.704628] udevd[1202]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc0186, key code 423): Invalid argument
[ 7.704637] udevd[1202]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc018a, key code 155): Invalid argument
[ 7.704646] udevd[1202]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc018e, key code 397): Invalid argument
[ 7.704655] udevd[1202]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc01b6, key code 212): Invalid argument
[ 7.704663] udevd[1202]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc01bc, key code 430): Invalid argument
[ 7.704672] udevd[1202]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc0221, key code 217): Invalid argument
[ 7.704681] udevd[1202]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc0223, key code 172): Invalid argument
[ 7.704689] udevd[1202]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc022d, key code 418): Invalid argument
[ 7.704698] udevd[1202]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0xc022e, key code 419): Invalid argument
[ 8.139057] usb 5-1: new full-speed USB device number 2 using ohci-pci
[ 11.808181] udevd (1201) used greatest stack depth: 5812 bytes left
[ 11.808917] udevd (1204) used greatest stack depth: 5740 bytes left
[ 32.384224] EXT4-fs (md1): re-mounted. Opts: (null)
[ 32.673578] Adding 6291388k swap on /dev/md2. Priority:-1 extents:1 across:6291388k
[ 32.914810] EXT4-fs (md3): mounted filesystem with ordered data mode. Opts: (null)
[ 39.108312] skge 0000:01:04.0 eth0: enabling interface
[ 39.111949] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.544072] skge 0000:01:04.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 41.544072] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 848.187409] cc1 (18203) used greatest stack depth: 5668 bytes left
[ 3865.210498] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 4289.219949] emerge (27042) used greatest stack depth: 5648 bytes left
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment