fnky

ANSI Escape Sequences

Standard escape codes are prefixed with Escape:

• Ctrl-Key: ^[
• Octal: \033
• Unicode: \u001b
• Hexadecimal: \x1B
• Decimal: 27

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

gbaman

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

anvaka

npm rank

This gist is updated daily via cron job and lists stats for npm packages:

1. Top 1,000 most depended-upon packages
2. Top 1,000 packages with largest number of dependencies
3. Top 1,000 packages with highest PageRank score

nhtua

#!/bin/bash -i
#using shebang with -i to enable interactive mode (auto load .bashrc)

set -e #stop immediately if any error happens

# Install Open SDK
apt update
apt install openjdk-8-jdk -y
update-java-alternatives --set java-1.8.0-openjdk-amd64
java -version

DavidWells

Aligning images

This is a guide for aligning images.

See the full Advanced Markdown doc for more tips and tricks

left alignment

brgaulin

This gist uses the idf-release/v4.2 release of arduino-esp32, can be found here: https://github.com/espressif/arduino-esp32/tree/idf-release/v4.2

actuino

The setup of a bluetooth speaker on a Pi Zero W is pretty touchy.

Please get in touch via Twitter @actuino or http://www.actuino.fr/ if you've got comments or improvements to this quick draft.

First checks

• Use a solid power source
• check the speaker works on another hardware (android phone f.i.)
• make sure you've updated your Raspbian, install and run rpi-update just in case.

ThePredators

⭐ Setup Mobile Development Environment

⚠️ The following configuration has been tested on Intel, M1 & M2 Ships ⚠️

Pre-requisit :

If you have any issues with macOS, or need anything related to it check this documentation

Install Xcode Command Line tools :

ianfinch

#!/bin/bash
# Set up a Raspberry Pi 4 as a USB-C Ethernet Gadget
# Based on:
#     - https://www.hardill.me.uk/wordpress/2019/11/02/pi4-usb-c-gadget/
#     - https://pastebin.com/VtAusEmf

if ! $(grep -q dtoverlay=dwc2 /boot/config.txt) ; then
    echo "Add the line dtoverlay=dwc2 to /boot/config.txt"
    exit
fi