dbodyas

## Crack Sublime Text Windows and Linux.md

      
              1 file
            
          
              107 forks
            
          
              521 comments
            
          
              452 stars
            
          
                JerryLokjianming
                / Crack Sublime Text Windows and Linux.md
            
            
              Last active
              July 20, 2024 18:39
            
              
                Crack Sublime Text 3.2.2 Build 3211 and Sublime Text 4 Alpha 4098 with Hex
              
          
How to Crack Sublime Text 3.2.2 Build 3211 with Hex Editor (Windows | Without License) ↓


Download & Install Sublime Text 3.2.2 Build 3211
Visit https://hexed.it/
Open file select sublime_text.exe
Offset 0x8545: Original 84 -> 85
Offset 0x08FF19: Original 75 -> EB
Offset 0x1932C7: Original 75 -> 74 (remove UNREGISTERED in title bar, so no need to use a license)


## multiple-repository-and-identities-git-configuration.md

      
              1 file
            
          
              76 forks
            
          
              19 comments
            
          
              313 stars
            
          
                bgauduch
                / multiple-repository-and-identities-git-configuration.md
            
            
              Last active
              July 17, 2024 12:57
            
              
                Git config with multiple identities and multiple repositories
              
          
    Setup multiple git identities & git user informations


/!\ Be very carrefull in your setup : any misconfiguration make all the git config to fail silently !
Go trought this guide step by step and it should be fine 😉

Setup multiple git ssh identities for git


Generate your SSH keys as per your git provider documentation.
Add each public SSH keys to your git providers acounts.
In your ~/.ssh/config, set each ssh key for each repository as in this exemple:


## zram.sh
#!/bin/bash

# Raspberry Pi ZRAM script
# Tuned for quad core, 1 GB RAM models
# put me in /etc/init.d/zram.sh and make me executable
# then run "sudo update-rc.d zram.sh defaults"

modprobe zram
echo 3 >/sys/devices/virtual/block/zram0/max_comp_streams
echo lz4 >/sys/devices/virtual/block/zram0/comp_algorithm

## dokku_on_digital_ocean.md

      
              1 file
            
          
              15 forks
            
          
              1 comment
            
          
              47 stars
            
          
                henrik
                / dokku_on_digital_ocean.md
            
            
              Last active
              May 12, 2022 14:38
            
              
                Notes from running Dokku on Digital Ocean.
              
          
    My notes for Dokku on Digital Ocean.
These may be a bit outdated: Since I originally wrote them, I've reinstalled on a newer Dokku and may not have updated every section below.
Commands

Install dokku-cli (gem install dokku-cli) for a more Heroku-like CLI experience (dokku config:set FOO=bar).
# List/run commands when not on Dokku server (assuming a "henroku" ~/.ssh/config alias)

ssh henroku dokku

  
## anonymous
# author: tmwhere.com

# --- third party dependencies
PIXI = require('pixi.dev')
_ = require('lodash')

noise = require('perlin').noise
Quadtree = require('quadtree').Quadtree
seedrandom = require('seedrandom')
# ---

## puma.sh
#!/usr/bin/env bash

# Simple move this file into your Rails `script` folder. Also make sure you `chmod +x puma.sh`.
# Please modify the CONSTANT variables to fit your configurations.

# The script will start with config set by $PUMA_CONFIG_FILE by default

PUMA_CONFIG_FILE=config/puma.rb
PUMA_PID_FILE=tmp/pids/puma.pid
PUMA_SOCKET=tmp/sockets/puma.sock

## rails_route_recognizer.rb
  class RouteRecognizer
    attr_reader :paths

    # To use this inside your app, call:
    # `RouteRecognizer.new.initial_path_segments`
    # This returns an array, e.g.: ['assets','blog','team','faq','users']

    INITIAL_SEGMENT_REGEX = %r{^\/([^\/\(:]+)}

    def initialize
	#!/bin/bash

	# Raspberry Pi ZRAM script
	# Tuned for quad core, 1 GB RAM models
	# put me in /etc/init.d/zram.sh and make me executable
	# then run "sudo update-rc.d zram.sh defaults"

	modprobe zram
	echo 3 >/sys/devices/virtual/block/zram0/max_comp_streams
	echo lz4 >/sys/devices/virtual/block/zram0/comp_algorithm
	# author: tmwhere.com

	# --- third party dependencies
	PIXI = require('pixi.dev')
	_ = require('lodash')

	noise = require('perlin').noise
	Quadtree = require('quadtree').Quadtree
	seedrandom = require('seedrandom')
	# ---
	#!/usr/bin/env bash

	# Simple move this file into your Rails `script` folder. Also make sure you `chmod +x puma.sh`.
	# Please modify the CONSTANT variables to fit your configurations.

	# The script will start with config set by $PUMA_CONFIG_FILE by default

	PUMA_CONFIG_FILE=config/puma.rb
	PUMA_PID_FILE=tmp/pids/puma.pid
	PUMA_SOCKET=tmp/sockets/puma.sock
	class RouteRecognizer
	attr_reader :paths

	# To use this inside your app, call:
	# `RouteRecognizer.new.initial_path_segments`
	# This returns an array, e.g.: ['assets','blog','team','faq','users']

	INITIAL_SEGMENT_REGEX = %r{^\/([^\/\(:]+)}

	def initialize