gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

troyhunt

addEventListener('fetch', event => {
  event.respondWith(fetchAndApply(event.request))
})

async function fetchAndApply(request) {
  let response = await fetch(request)

  let referer = request.headers.get('Referer')
  let contentType = response.headers.get('Content-Type') || ''
  if (referer && contentType.startsWith('image/')) {

gbaman

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

vorg

//MIT License
//Copyright (c) 2021 Felix Westin
//Source: https://github.com/Fewes/MinimalAtmosphere

//Ported to GLSL by Marcin Ignac

#ifndef ATMOSPHERE_INCLUDED
#define ATMOSPHERE_INCLUDED

// -------------------------------------

nolanlawson

// Promise.all is good for executing many promises at once
Promise.all([
  promise1,
  promise2
]);

// Promise.resolve is good for wrapping synchronous code
Promise.resolve().then(function () {
  if (somethingIsNotRight()) {
    throw new Error("I will be rejected asynchronously!");

jh3y

:root {
    --none: linear(0, 1);
    --power1-in: linear( 0, 0.0039, 0.0156, 0.0352, 0.0625, 0.0977, 0.1407, 0.1914, 0.2499, 0.3164, 0.3906 62.5%, 0.5625, 0.7656, 1 );
    --power1-out: linear( 0, 0.2342, 0.4374, 0.6093 37.49%, 0.6835, 0.7499, 0.8086, 0.8593, 0.9023, 0.9375, 0.9648, 0.9844, 0.9961, 1 );
    --power1-in-out: linear( 0, 0.0027, 0.0106 7.29%, 0.0425, 0.0957, 0.1701 29.16%, 0.2477, 0.3401 41.23%, 0.5982 55.18%, 0.7044 61.56%, 0.7987, 0.875 75%, 0.9297, 0.9687, 0.9922, 1 );
    --power2-in: linear( 0, 0.0014 11.11%, 0.0071 19.24%, 0.0188 26.6%, 0.037 33.33%, 0.0634 39.87%, 0.0978 46.07%, 0.1407 52.02%, 0.1925 57.74%, 0.2559 63.49%, 0.3295 69.07%, 0.4135 74.5%, 0.5083 79.81%, 0.6141 85%, 0.7312 90.09%, 1 );
    --power2-out: linear( 0, 0.2688 9.91%, 0.3859 15%, 0.4917 20.19%, 0.5865 25.5%, 0.6705 30.93%, 0.7441 36.51%, 0.8075 42.26%, 0.8593 47.98%, 0.9022 53.93%, 0.9366 60.13%, 0.963 66.67%, 0.9812 73.4%, 0.9929 80.76%, 0.9986 88.89%, 1 );
    --power2-in-out: linear( 0, 0.0036 9.62%, 0.0185 16.66

sarthology

let regex;

/* matching a specific string */
regex = /hello/; // looks for the string between the forward slashes (case-sensitive)... matches "hello", "hello123", "123hello123", "123hello"; doesn't match for "hell0", "Hello" 
regex = /hello/i; // looks for the string between the forward slashes (case-insensitive)... matches "hello", "HelLo", "123HelLO"
regex = /hello/g; // looks for multiple occurrences of string between the forward slashes...

/* wildcards */
regex = /h.llo/; // the "." matches any one character other than a new line character... matches "hello", "hallo" but not "h\nllo"
regex = /h.*llo/; // the "*" matches any character(s) zero or more times... matches "hello", "heeeeeello", "hllo", "hwarwareallo"

enriched

/**
 * MIT License
 *
 * Copyright (c) 2016 Richard Adams (https://github.com/enriched)
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is

shawwn

javascript:(function()%7Bwindow.addEventListener(%20'scroll'%2C%20(e)%20%3D%3E%20%7B%20localStorage.setItem('scrollY'%2C%20scrollY)%3B%20localStorage.setItem('zoom'%2C%20document.body.style.zoom)%3B%20%7D%20)%3Bwindow.addEventListener(%20'storage'%2C%20(e)%20%3D%3E%20%7B%20if%20(e.key%20%3D%3D%3D%20%22scrollY%22)%20%7B%20y%3DparseInt(e.newValue)%3B%20window.scrollTo(0%2C%20y)%3B%20%7D%3B%20if%20(e.key%20%3D%3D%3D%20%22zoom%22)%20%7B%20document.body.style.zoom%3De.newValue%3B%20%7D%3B%20%7D%20)%7D)()

craigcarlyle

function a11yLinter(tagName: string) {
  return cy.window().then((win: any) => {
    return new Cypress.Promise(function(resolve: any, reject: any) {
      win.axe.run(tagName, (err: any, results: any) => {
        if (err) {
          reject(err);
        }
        resolve(results.violations);
      });
    });