bisectable6

query

old=2015.07 say ½

result

Bisecting: 3137 revisions left to test after this (roughly 12 steps)
[d740258702321435b205a937d9ed8910a7c396d5] Rename private method to something more appropriate
»»»»» Testing d740258702321435b205a937d9ed8910a7c396d5
»»»»» Script output:
0.5
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 8b9124e5451b182a6233ddd9fc98d201026533c3
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/f79cahlDt_:1
------> say⏏ ½
Bogus postfix
at /tmp/f79cahlDt_:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/f79cahlDt_:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing c48ec7780b291cefa55acd386b7d51d55f0e7240
»»»»» Script output:
0.5
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 39869f1bc15b2f03fd8ac8864595e2669a3c5988
»»»»» Script output:
0.5
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 4e3eab678c99088a778cad40cec8b8416b520a6e
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/f79cahlDt_:1
------> say⏏ ½
Bogus postfix
at /tmp/f79cahlDt_:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/f79cahlDt_:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 7a4fa6a78d8987299cda33b012633e364ab2e627
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/f79cahlDt_:1
------> say⏏ ½
Bogus postfix
at /tmp/f79cahlDt_:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/f79cahlDt_:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing bedf2a7073042c79b886aec9e39ad8be4b0af498
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/f79cahlDt_:1
------> say⏏ ½
Bogus postfix
at /tmp/f79cahlDt_:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/f79cahlDt_:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 560e00bfd589c96eccb448ffb39305c723dcf867
»»»»» Script output:
0.5
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 8ef5a59eebe9591325393d987566927b4d24366b
»»»»» Script output:
0.5
»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing e1a0219489bee46c08037eab38c13f66443dd961
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/f79cahlDt_:1
------> say⏏ ½
Bogus postfix
at /tmp/f79cahlDt_:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/f79cahlDt_:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing c8bc50531bd488de397809d9e3302f3a03d6f196
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/f79cahlDt_:1
------> say⏏ ½
Bogus postfix
at /tmp/f79cahlDt_:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/f79cahlDt_:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 4d8a90422dfc88c6baa6a3620dcf6959c4450f6d
»»»»» Script output:
===SORRY!===
Argument to "say" seems to be malformed
at /tmp/f79cahlDt_:1
------> say⏏ ½
Bogus postfix
at /tmp/f79cahlDt_:1
------> say ⏏½
    expecting any of:
        infix
        infix stopper
        postfix
        statement end
        statement modifier
        statement modifier loop
Other potential difficulties:
    Unsupported use of bare "say"; in Perl 6 please use .say if you meant $_, or use an explicit invocant or argument, or use &say to refer to the function as a noun
    at /tmp/f79cahlDt_:1
    ------> say⏏ ½

»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
8ef5a59eebe9591325393d987566927b4d24366b is the first new commit
commit 8ef5a59eebe9591325393d987566927b4d24366b
Author: TimToady <larry@wall.org>
Date:   Tue Nov 24 23:43:01 2015 -0800

    allow unival terms, because why not?

:040000 040000 35eaac758757402cefa7ab12495fc9244294ea9f c116efec63bbbc696f8bbf722c29eefdeba73ce6 M	src