eldorplus

centos8 @ OVH/SoYouStart/Kimsufi

How to install CentOS 8 on OVH/SoYouStart/Kimsufi

• connect to the OVH/SoYouStart/Kimsufi API and create a ipxe script under https://eu.api.kimsufi.com/console/#/me/ipxeScript#POST or equivalent, see centos8.ipxe below
• boot your server from this netboot, and ping it to follow the process. If you can observe the webserver's logs you will se your server's IP pulling kernel and initrd with "iPXE" user agent, then it will start pinging, and retrieve the kickstart.cfg a bit later (with "curl" user agent). This is the moment when you could set your server back to "Boot from Hard Disk".
• Also at this point you can connect to your server with SSH using the key/password set in the kickstart file. type tmux a to attach the install's tmux session and follow the progress. For debugging, check the logs in /tmp and those sent over syslog.

upstream documentation

• [kernel/installer boot params in ipxe script](https://access.redhat.com/documentation/en-us/red_hat_enterprise_li

estsaon

WSL:

1. Install openssh-server:

sudo apt install openssh-server

2. Add or uncomment following lines in /etc/ssh/sshd_config:

thegreatestminer

UEsDBBQAAAAIABNQjFGCf/GfLgAAACwAAAAHAAAAUHJvLmtleTMqdncpCXQOKDAp9woMzEo1MTVOrHAzTjTLME7VNs1LK8owTjQpcU8tcuLlAgBQSwECFAAUAAAACAATUIxRgn/xny4AAAAsAAAABwAAAAAAAAAAAAAAAAAAAAAAUHJvLmtleVBLBQYAAAAAAQABADUAAABTAAAAAAA=

tetrashine

await this._page.evaluateOnNewDocument(() => {
      let checkWatchTimeFunc = () => {

        let currElem = document.getElementsByClassName('ytp-time-current');   //grab the element showing current play time
        let maxElem = document.getElementsByClassName('ytp-time-duration');   //grab the element showing total play time

        if (
          currElem.length > 0 && maxElem.length > 0               //check if there are any such element
          && currElem[0].innerText === maxElem[0].innerText       //compare the value between the 2 elements
        ) {

trongnghia203

Pyenv

Install Multiple Python Versions for Specific Project

• Home project: https://github.com/pyenv/pyenv

• Reference to: https://www.tecmint.com/pyenv-install-and-manage-multiple-python-versions-in-linux/

1. Install pyenv in Linux

felixkrohn

centos8 @ OVH/SoYouStart/Kimsufi

How to install CentOS 8 on OVH/SoYouStart/Kimsufi

• connect to the OVH/SoYouStart/Kimsufi API and create a ipxe script under https://eu.api.kimsufi.com/console/#/me/ipxeScript#POST or equivalent, see centos8.ipxe below
• boot your server from this netboot, and ping it to follow the process. If you can observe the webserver's logs you will se your server's IP pulling kernel and initrd with "iPXE" user agent, then it will start pinging, and retrieve the kickstart.cfg a bit later (with "curl" user agent). This is the moment when you could set your server back to "Boot from Hard Disk".
• Also at this point you can connect to your server with SSH using the key/password set in the kickstart file. type tmux a to attach the install's tmux session and follow the progress. For debugging, check the logs in /tmp and those sent over syslog.

upstream documentation

• [kernel/installer boot params in ipxe script](https://access.redhat.com/documentation/en-us/red_hat_enterprise_li

rikka0w0

Pre-requests:

1. TFTP server
2. IPXE Make sure ipxe.lkrn is in the TFTP root.
3. iSCSI target (Server) Assume we have an iSCSI target "1:net.cszombie.au:windows" that is ready to be connected. 1 is LUN id, "net.cszombie.au:windows" is the target name.
4. HTTP server (To speed up loading boot.wim, http is faster than tftp, http is supported by IPXE, however this is optional)

1. Download wimboot to the root of the TFTP server

2. Create scripts:

X-Raym

Last Updated: 11 July 2024
----------------------------
In this package, you will find a brief introduction to the Scripting API for DaVinci Resolve Studio. Apart from this README.txt file, this package contains folders containing the basic import
modules for scripting access (DaVinciResolve.py) and some representative examples.

From v16.2.0 onwards, the nodeIndex parameters accepted by SetLUT() and SetCDL() are 1-based instead of 0-based, i.e. 1 <= nodeIndex <= total number of nodes.

Overview
--------
As with Blackmagic Fusion scripts, user scripts written in Lua and Python programming languages are supported. By default, scripts can be invoked from the Console window in the Fusion page,

vrumger

const puppeteer = require('puppeteer');
const uuid = require('uuid');

const sleep = ms => new Promise(r => setTimeout(r, ms));

(async () => {
    const browser = await puppeteer.launch({ headless: false });
    const page = await browser.newPage();

    const id = uuid.v4();

JonTheNiceGuy

---
- hosts: localhost
  vars:
  - dnsname: your.dns.name
  - tmppath: "./tmp/"
  - crtpath: "{{ tmppath }}{{ dnsname }}.crt"
  - pempath: "{{ tmppath }}{{ dnsname }}.pem"
  - csrpath: "{{ tmppath }}{{ dnsname }}.csr"
  - pfxpath: "{{ tmppath }}{{ dnsname }}.pfx"
  - private_key_password: "password"