elizabethn119

import os
import glob
import time
from ISStreamer.Streamer import Streamer

streamer = Streamer(bucket_name="Temperature Stream", bucket_key="piot_temp_stream031815", access_key="PUT_YOUR_ACCESS_KEY_HERE")

os.system('modprobe w1-gpio')
os.system('modprobe w1-therm')

elizabethn119

from sense_hat import SenseHat  
import time  
import sys  
from ISStreamer.Streamer import Streamer  
  
# --------- User Settings ---------
BUCKET_NAME = "Office Weather"
BUCKET_KEY = "sensehat"
ACCESS_KEY = "Your_Access_Key"
SENSOR_LOCATION_NAME = "Office"

elizabethn119

import time 
import board
import busio
import adafruit_bme280
from ISStreamer.Streamer import Streamer

# Create library object using our Bus I2C port
i2c = busio.I2C(board.SCL, board.SDA)
bme280 = adafruit_bme280.Adafruit_BME280_I2C(i2c)
 

elizabethn119

#include <WiFi.h>
#include <HTTPClient.h>
#include "DHT.h"

#define DHTPIN 4     // Digital pin connected to the DHT sensor
#define DHTTYPE DHT22
DHT dht(DHTPIN, DHTTYPE);

//-------- User Settings -----------
const char* ssid = "SSID";

elizabethn119

#!/usr/bin/python

# ----------------------------------------------------------------------------
#                   BoatMonitor Version 1.0  May 2017
#   This is a Python 2.7.9 script for sending data from
#   from a Raspberry Pi 3 and an interface board.
#   It reports on various parameters
#   on a boat under these conditions which are checked every 5min:
#       1. if shore power is off
#       2. if batteries are below 12vdc

elizabethn119

import adafruit_dht
from ISStreamer.Streamer import Streamer
import time
import board

# --------- User Settings ---------
SENSOR_LOCATION_NAME = "Office"
BUCKET_NAME = ":partly_sunny: Room Temperatures"
BUCKET_KEY = "dht22sensor"
ACCESS_KEY = "ENTER ACCESS KEY HERE"

elizabethn119

# SPDX-FileCopyrightText: 2020 Bryan Siepert, written for Adafruit Industries

# SPDX-License-Identifier: Unlicense
import time
import board
import adafruit_bh1750

i2c = board.I2C()

sensor = adafruit_bh1750.BH1750(i2c)

elizabethn119

import time

from board import SCL, SDA
import busio

from adafruit_seesaw.seesaw import Seesaw

i2c_bus = busio.I2C(SCL, SDA)

ss = Seesaw(i2c_bus, addr=0x36)

elizabethn119

import time
from ISStreamer.Streamer import Streamer
from board import SCL, SDA
import busio
from adafruit_seesaw.seesaw import Seesaw

# --------- User Settings ---------
SENSOR_LOCATION_NAME = "House Plant"
BUCKET_NAME = "House Plant"
BUCKET_KEY = "soilsensor"

elizabethn119

import time
import board
import adafruit_bh1750
from ISStreamer.Streamer import Streamer

# --------- User Settings ---------
SENSOR_LOCATION_NAME = "Office"
BUCKET_NAME = "House Plant"
BUCKET_KEY = "soilsensor"
ACCESS_KEY = "ENTER ACCESS KEY HERE"