embeddeduser

// Light meter
// 12K resistor connected between A0 pin and GND
// Photoresistor connected between A0 and VCC 3.3V

#include "U8glib.h"

U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK);  // Display which does not send AC
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0);  // I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK);  // Display which does not send AC

embeddeduser

// BMP180 Barometric Pressure& Temp Sensor //
// SSD1306_128X64 I2C OLED
// BMP180 Sensor I2C interface
// OLED SDA to BMP SDA to Arduino UNO SDA
// OLED SCL to BMP SCL to Arduino UNO SCL
// OLED VCC to BMP VCC to Arduino UNO 3.3V
// OLED GND to BMP GND to Arduino UNO GND
// Video https://www.youtube.com/channel/UCqJym4fsMaT1CZ2i6GxWURQ
// More information at http://www.jaimeferns.in/2016/10/arduino-bmp180-barometric-pressure-temp.html
// BMP sensor code Modified by embeddedUser from Adafruit example

embeddeduser

// Written by EmbeddedUser 
// Refer to blog http://www.jaimeferns.in/2016/10/how-to-build-humidity-and-temperature.html
// Youtube Video https://www.youtube.com/watch?v=g-rcEd_2I-w
// Humidity meter with DHT11, Arduino and I2c OLED display
// Now support displaying sensor error and configuring deg C or deg F

#include <DHT.h>
#include "U8glib.h"

// Display defaults to Degree F. TO use metric display,

embeddeduser

import logging
import requests
import lxml.html
import sys

sat = "40014" #SAT norrad_cat_id
transmitter = "NSXo8tGxmxpTUMsmSH34FF" #Transmitter UUID
start="2017-12-1 17:00" #Start date and time
end="2017-12-2 03:00" #Stop date and time