erdoukki

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

erdoukki

###Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)
More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH is

erdoukki

Introduction

This is about documenting getting Linux running on the late 2016 and mid 2017 MPB's; the focus is mostly on the MacBookPro13,3 and MacBookPro14,3 (15inch models), but I try to make it relevant and provide information for MacBookPro13,1, MacBookPro13,2, MacBookPro14,1, and MacBookPro14,2 (13inch models) too. I'm currently using Fedora 27, but most the things should be valid for other recent distros even if the details differ. The kernel version is 4.14.x (after latest update).

The state of linux on the MBP (with particular focus on MacBookPro13,2) is also being tracked on https://github.com/Dunedan/mbp-2016-linux . And for Ubuntu users there are a couple tutorials (here and here) focused on that distro and the MacBook.

Note: For those who have followed these instructions ealier, and in particular for those who have had problems with the custom DSDT, modifying the DSDT is not necessary anymore - se

erdoukki

# Generate a BaseSystem.dmg with 10.13 Install Packages
hdiutil attach /Applications/Install\ macOS\ 10.13\ Beta.app/Contents/SharedSupport/InstallESD.dmg -noverify -mountpoint /Volumes/highsierra
hdiutil create -o /tmp/HighSierraBase.cdr -size 7316m -layout SPUD -fs HFS+J
hdiutil attach /tmp/HighSierraBase.cdr.dmg -noverify -mountpoint /Volumes/install_build
asr restore -source /Applications/Install\ macOS\ 10.13\ Beta.app/Contents/SharedSupport/BaseSystem.dmg -target /Volumes/install_build -noprompt -noverify -erase
cp -R /Volumes/highsierra/Packages /Volumes/OS\ X\ Base\ System/System/Installation
hdiutil detach /Volumes/OS\ X\ Base\ System/
hdiutil detach /Volumes/highsierra/
mv /tmp/HighSierraBase.cdr.dmg /tmp/BaseSystem.dmg

erdoukki

# List the contents of the current directory
root@host:/# ls
bin   dev  home        lib    lost+found  mnt  proc  run   srv  tmp  vagrant  vmlinuz
boot  etc  initrd.img  lib64  media       opt  root  sbin  sys  usr  var

# Bind mount 'dev' and 'proc' filesystems from the host
root@host:/# TARGET="/var/some-chroot"
root@host:/# mkdir -p ${TARGET}/{dev,proc,bin,lib,lib64}
root@host:/# mount --bind /dev ${TARGET}/dev
root@host:/# mount --bind /proc ${TARGET}/proc

erdoukki

DeezLoader

Update

Deezloader is still being maintained here : https://github.com/Deezloader/DeezLoader

Here are some useful links :

• Windows installer: DeezLoader-3.1.3-win-64&32-installer.exe
• Windows x32 portable: DeezLoader-3.1.3-win-32-portable.7z
• Windows x64 portable: DeezLoader-3.1.3-win-64-portable.7z
• Linux x64DeezLoader-3.1.3-linux-x64.AppImage

erdoukki

#!/usr/bin/env sh

# Download lists, unpack and filter, write to stdout
curl -s https://www.iblocklist.com/lists.php \
  | sed -n "s/.*value='\(http:.*=bt_.*\)'.*/\1/p" \
  | xargs wget -O - \
  | gunzip \
  | egrep -v '^#'

erdoukki

# Disable extraneous services on Server 2016 Desktop Experience
# https://blogs.technet.microsoft.com/secguide/2017/05/29/guidance-on-disabling-system-services-on-windows-server-2016-with-desktop-experience/
Configuration DisablingServicesOnServer2016wDE
{
    param(
        [String]$ComputerName = "localhost",
        [ValidateSet('ShouldBeDisabledOnly','ShouldBeDisabledAndDefaultOnly','OKToDisable','OKToDisablePrinter','OKToDisableDC')]
        [String]$Level = 'OKToDisable'
    )

erdoukki

#!/bin/bash
# Easy script to create OpenVPN client configuration with the user, pre-generating user's
# RSA key and certificate.
# 
# Configuration template must exist in the same directory, with only missing part: certificates.
#
# (c) Dmytro Kovalov, 2015
#

cd $(dirname ${BASH_SOURCE[0]})

erdoukki

unify-ovpn.sh

1. cd to the directory where your 4 files are. (client.ovpn, client.key, client.crt, and ca.crt)

2. Call unify-ovpn.sh with the filename of your ovpn file

    unify-ovpn.sh client.ovpn
   

3. A new file named client_unified.ovpn will be created