Created
April 20, 2016 11:48
-
-
Save anonymous/f396ae322d5a437b6373960d693246ad to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| wpa_supplicant v2.4 | |
| dbus: Register D-Bus object '/fi/w1/wpa_supplicant1' | |
| Providing DBus service 'fi.w1.wpa_supplicant1'. | |
| Providing DBus service 'fi.epitest.hostap.WPASupplicant'. | |
| Successfully initialized wpa_supplicant | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1) [s] | |
| dbus: fi.w1.wpa_supplicant1.CreateInterface (/fi/w1/wpa_supplicant1) [a{sv}] | |
| wpa_dbus_dict_open_read: start reading a dict entry | |
| wpa_dbus_dict_get_entry: dict entry key: Driver | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| wpa_dbus_dict_get_entry: dict entry key: Ifname | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| Initializing interface 'wlp1s0b1' conf 'N/A' driver 'nl80211,wext' ctrl_interface 'N/A' bridge 'N/A' | |
| rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 | |
| rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0 | |
| rfkill: initial event: idx=2 type=2 op=0 soft=0 hard=0 | |
| rfkill: initial event: idx=4 type=2 op=0 soft=0 hard=0 | |
| nl80211: Supported cipher 00-0f-ac:1 | |
| nl80211: Supported cipher 00-0f-ac:5 | |
| nl80211: Supported cipher 00-0f-ac:2 | |
| nl80211: Supported cipher 00-0f-ac:4 | |
| nl80211: Supported cipher 00-0f-ac:10 | |
| nl80211: Supported cipher 00-0f-ac:8 | |
| nl80211: Supported cipher 00-0f-ac:9 | |
| nl80211: Using driver-based off-channel TX | |
| nl80211: interface wlp1s0b1 in phy phy0 | |
| nl80211: Set mode ifindex 2 iftype 2 (STATION) | |
| nl80211: Subscribe to mgmt frames with non-AP handle 0x193dd70 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=040a | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=040b | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=040c | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=040d | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=090a | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=090b | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=090c | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=090d | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=0409506f9a09 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=7f506f9a09 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=0801 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=06 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=0a07 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=0a11 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=1101 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=1102 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x193dd70 match=0505 | |
| netlink: Operstate: ifindex=2 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT) | |
| nl80211: driver param='(null)' | |
| Add interface wlp1s0b1 to a new radio phy0 | |
| nl80211: Regulatory information - country=BY (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) | |
| nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS) | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| wlp1s0b1: Own MAC address: 74:2f:68:d2:b1:f3 | |
| wpa_driver_nl80211_set_key: ifindex=2 (wlp1s0b1) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 | |
| wpa_driver_nl80211_set_key: ifindex=2 (wlp1s0b1) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 | |
| wpa_driver_nl80211_set_key: ifindex=2 (wlp1s0b1) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 | |
| wpa_driver_nl80211_set_key: ifindex=2 (wlp1s0b1) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 | |
| wpa_driver_nl80211_set_key: ifindex=2 (wlp1s0b1) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0 | |
| wpa_driver_nl80211_set_key: ifindex=2 (wlp1s0b1) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0 | |
| wlp1s0b1: RSN: flushing PMKID list in the driver | |
| nl80211: Flush PMKIDs | |
| wlp1s0b1: State: DISCONNECTED -> INACTIVE | |
| TDLS: TDLS operation not supported by driver | |
| TDLS: Driver uses internal link setup | |
| TDLS: Driver does not support TDLS channel switching | |
| wlp1s0b1: WPS: UUID based on MAC address: e909a86f-b1a7-5277-89e0-0bfd7fd694fd | |
| ENGINE: Loading dynamic engine | |
| ENGINE: Loading dynamic engine | |
| EAPOL: SUPP_PAE entering state DISCONNECTED | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Skip set_supp_port(unauthorized) while not associated | |
| EAPOL: KEY_RX entering state NO_KEY_RECEIVE | |
| EAPOL: SUPP_BE entering state INITIALIZE | |
| EAP: EAP entering state DISABLED | |
| dbus: Register interface object '/fi/w1/wpa_supplicant1/Interfaces/1' | |
| wlp1s0b1: Added interface wlp1s0b1 | |
| wlp1s0b1: State: INACTIVE -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1) [s] | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| dbus: fi.w1.wpa_supplicant1.Interface.NetworkReply (/fi/w1/wpa_supplicant1/Interfaces/1) [oss] | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| dbus: fi.w1.wpa_supplicant1.Interface.Scan (/fi/w1/wpa_supplicant1/Interfaces/1) [a{sv}] | |
| wlp1s0b1: Add radio work 'scan'@0x1940490 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1940490 after 0.000080 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| nl80211: Scan SSID - hexdump_ascii(len=11): | |
| 73 65 72 67 65 69 5f 61 73 75 73 sergei_asus | |
| nl80211: Scan SSID - hexdump_ascii(len=13): | |
| 73 65 72 67 65 69 5f 67 61 6c 61 78 79 sergei_galaxy | |
| Scan requested (ret=0) - scan timeout 10 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000077 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan probed for SSID 'sergei_asus' | |
| nl80211: Scan probed for SSID 'sergei_galaxy' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.659698 seconds | |
| nl80211: Received scan results (5 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 1 | |
| wlp1s0b1: BSS: Add new id 0 BSSID 00:3a:99:04:bf:42 SSID 'eduroam' | |
| dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0' | |
| wlp1s0b1: BSS: Add new id 1 BSSID 00:3a:99:04:bf:43 SSID 'test' | |
| dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1' | |
| wlp1s0b1: BSS: Add new id 2 BSSID 00:3a:9a:00:7c:12 SSID 'eduroam' | |
| dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2' | |
| wlp1s0b1: BSS: Add new id 3 BSSID 00:3a:9a:00:7c:13 SSID 'test' | |
| dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/3' | |
| wlp1s0b1: BSS: Add new id 4 BSSID 00:3a:98:f5:90:e2 SSID 'eduroam' | |
| dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/4' | |
| BSS: last_scan_res_used=5/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1940490 done in 0.661855 seconds | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Short-circuit new scan request since there are no enabled networks | |
| wlp1s0b1: State: DISCONNECTED -> INACTIVE | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0) [s] | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1) [s] | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2) [s] | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/3) [s] | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/4) [s] | |
| EAPOL: disable timer tick | |
| dbus: fi.w1.wpa_supplicant1.Interface.Scan (/fi/w1/wpa_supplicant1/Interfaces/1) [a{sv}] | |
| wlp1s0b1: Add radio work 'scan'@0x193f600 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x193f600 after 0.000111 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| nl80211: Scan SSID - hexdump_ascii(len=11): | |
| 73 65 72 67 65 69 5f 61 73 75 73 sergei_asus | |
| nl80211: Scan SSID - hexdump_ascii(len=13): | |
| 73 65 72 67 65 69 5f 67 61 6c 61 78 79 sergei_galaxy | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000057 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan probed for SSID 'sergei_asus' | |
| nl80211: Scan probed for SSID 'sergei_galaxy' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.660725 seconds | |
| nl80211: Received scan results (6 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 2 | |
| wlp1s0b1: BSS: Add new id 5 BSSID 00:3a:99:d2:61:62 SSID 'eduroam' | |
| dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5' | |
| BSS: last_scan_res_used=6/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x193f600 done in 0.661797 seconds | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Short-circuit new scan request since there are no enabled networks | |
| wlp1s0b1: State: INACTIVE -> INACTIVE | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/3 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/4 | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5) [s] | |
| dbus: fi.w1.wpa_supplicant1.Interface.Scan (/fi/w1/wpa_supplicant1/Interfaces/1) [a{sv}] | |
| wlp1s0b1: Add radio work 'scan'@0x193f600 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x193f600 after 0.000139 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| nl80211: Scan SSID - hexdump_ascii(len=11): | |
| 73 65 72 67 65 69 5f 61 73 75 73 sergei_asus | |
| nl80211: Scan SSID - hexdump_ascii(len=13): | |
| 73 65 72 67 65 69 5f 67 61 6c 61 78 79 sergei_galaxy | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000128 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan probed for SSID 'sergei_asus' | |
| nl80211: Scan probed for SSID 'sergei_galaxy' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.660661 seconds | |
| nl80211: Received scan results (6 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 3 | |
| BSS: last_scan_res_used=6/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x193f600 done in 0.661566 seconds | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Short-circuit new scan request since there are no enabled networks | |
| wlp1s0b1: State: INACTIVE -> INACTIVE | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/3 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/4 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| dbus: org.freedesktop.DBus.Properties.Set (/fi/w1/wpa_supplicant1/Interfaces/1) [ssv] | |
| properties_get_or_set: Set(ApScan) | |
| dbus: fi.w1.wpa_supplicant1.Interface.AddNetwork (/fi/w1/wpa_supplicant1/Interfaces/1) [a{sv}] | |
| dbus: Register network object '/fi/w1/wpa_supplicant1/Interfaces/1/Networks/0' | |
| wpa_dbus_dict_open_read: start reading a dict entry | |
| wpa_dbus_dict_get_entry: dict entry key: proactive_key_caching | |
| wpa_dbus_dict_get_entry: dict entry variant content type: i | |
| _wpa_dbus_dict_fill_value_from_variant: int32 value: 1 | |
| proactive_key_caching=1 (0x1) | |
| wpa_dbus_dict_get_entry: dict entry key: password | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=6): [REMOVED] | |
| password - hexdump_ascii(len=6): [REMOVED] | |
| wpa_dbus_dict_get_entry: dict entry key: phase1 | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| phase1 - hexdump_ascii(len=9): | |
| 70 65 61 70 76 65 72 3d 30 peapver=0 | |
| wpa_dbus_dict_get_entry: dict entry key: eap | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00 | |
| wpa_dbus_dict_get_entry: dict entry key: phase2 | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| phase2 - hexdump_ascii(len=13): | |
| 61 75 74 68 3d 4d 53 43 48 41 50 56 32 auth=MSCHAPV2 | |
| wpa_dbus_dict_get_entry: dict entry key: ca_path | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=14): [REMOVED] | |
| ca_path - hexdump_ascii(len=14): | |
| 2f 65 74 63 2f 73 73 6c 2f 63 65 72 74 73 /etc/ssl/certs | |
| wpa_dbus_dict_get_entry: dict entry key: ssid | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=7): [REMOVED] | |
| ssid - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wpa_dbus_dict_get_entry: dict entry key: key_mgmt | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| key_mgmt: 0x1 | |
| wpa_dbus_dict_get_entry: dict entry key: identity | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=12): [REMOVED] | |
| identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| wpa_dbus_dict_get_entry: dict entry key: scan_ssid | |
| wpa_dbus_dict_get_entry: dict entry variant content type: i | |
| _wpa_dbus_dict_fill_value_from_variant: int32 value: 1 | |
| scan_ssid=1 (0x1) | |
| wpa_dbus_dict_get_entry: dict entry key: fragment_size | |
| wpa_dbus_dict_get_entry: dict entry variant content type: i | |
| _wpa_dbus_dict_fill_value_from_variant: int32 value: 1266 | |
| fragment_size=1266 (0x4f2) | |
| wpa_dbus_dict_get_entry: dict entry key: ca_path2 | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=14): [REMOVED] | |
| ca_path2 - hexdump_ascii(len=14): | |
| 2f 65 74 63 2f 73 73 6c 2f 63 65 72 74 73 /etc/ssl/certs | |
| wpa_dbus_dict_get_entry: dict entry key: bgscan | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=17): [REMOVED] | |
| bgscan - hexdump_ascii(len=17): | |
| 73 69 6d 70 6c 65 3a 33 30 3a 2d 36 35 3a 33 30 simple:30:-65:30 | |
| 30 0 | |
| dbus: fi.w1.wpa_supplicant1.Interface.SelectNetwork (/fi/w1/wpa_supplicant1/Interfaces/1) [o] | |
| Fast associate: Old scan results | |
| wlp1s0b1: Setting scan request: 0.000000 sec | |
| wlp1s0b1: State: INACTIVE -> SCANNING | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Add radio work 'scan'@0x1966f70 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1966f70 after 0.000017 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000057 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.660846 seconds | |
| nl80211: Received scan results (4 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 4 | |
| BSS: last_scan_res_used=4/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1966f70 done in 0.661585 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-61 | |
| wlp1s0b1: selected based on RSN IE | |
| wlp1s0b1: selected BSS 00:3a:99:04:bf:42 ssid='eduroam' | |
| wlp1s0b1: Considering connect request: reassociate: 1 selected: 00:3a:99:04:bf:42 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x19668f0 current_ssid=0x19668f0 | |
| wlp1s0b1: Request association with 00:3a:99:04:bf:42 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=9): 00 07 65 64 75 72 6f 61 6d | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=3): 03 01 01 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=8): 07 06 52 55 20 01 0d 14 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=7): 0b 05 15 00 05 00 00 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=3): 2a 01 00 | |
| WPA: RSN IE in EAPOL-Key - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=32): 85 1e 06 00 8f 00 0f 00 ff 03 59 00 41 50 2d 6c 69 62 2d 32 00 00 00 00 00 00 00 00 15 00 00 27 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=8): 96 06 00 40 96 00 0e 00 | |
| WPA: WMM Parameter Element - hexdump(len=24): 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: Add radio work 'sme-connect'@0x1966f70 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'sme-connect'@0x1966f70 after 0.000027 second wait | |
| wlp1s0b1: Automatic auth_alg selection: 0x1 | |
| RSN: PMKSA cache search - network_ctx=0x19668f0 try_opportunistic=1 | |
| RSN: Search for BSSID 00:3a:99:04:bf:42 | |
| RSN: Consider 00:3a:99:04:bf:42 for OKC | |
| RSN: No PMKSA cache entry found | |
| wlp1s0b1: RSN: using IEEE 802.11i/D9.0 | |
| wlp1s0b1: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2 | |
| wlp1s0b1: WPA: Selected mgmt group cipher 32 | |
| wlp1s0b1: WPA: clearing AP WPA IE | |
| WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| wlp1s0b1: WPA: using GTK TKIP | |
| wlp1s0b1: WPA: using PTK CCMP | |
| wlp1s0b1: WPA: using KEY_MGMT 802.1X | |
| wlp1s0b1: WPA: not using MGMT group cipher | |
| WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| RRM: Determining whether RRM can be used - device support: 0x0 | |
| RRM: No RRM in network | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: SME: Trying to authenticate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: SCANNING -> AUTHENTICATING | |
| EAPOL: External notification - EAP success=0 | |
| EAPOL: External notification - EAP fail=0 | |
| EAPOL: External notification - portControl=Auto | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| nl80211: Authenticate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=0): [NULL] | |
| * Auth Type 0 | |
| nl80211: Authentication request send successfully | |
| nl80211: Event message available | |
| nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp1s0b1 | |
| nl80211: New station 00:3a:99:04:bf:42 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| nl80211: Event message available | |
| nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=30): b0 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 50 ec 00 00 02 00 00 00 | |
| nl80211: Authenticate event | |
| wlp1s0b1: Event AUTH (11) received | |
| wlp1s0b1: SME: Authentication response: peer=00:3a:99:04:bf:42 auth_type=0 auth_transaction=2 status_code=0 | |
| SME: Authentication response IEs - hexdump(len=0): [NULL] | |
| wlp1s0b1: set_disable_max_amsdu: -1 | |
| wlp1s0b1: set_ampdu_factor: -1 | |
| wlp1s0b1: set_ampdu_density: -1 | |
| wlp1s0b1: set_disable_ht40: 0 | |
| wlp1s0b1: set_disable_sgi: 0 | |
| wlp1s0b1: set_disable_ldpc: 0 | |
| wlp1s0b1: Trying to associate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: AUTHENTICATING -> ASSOCIATING | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| nl80211: Associate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 7f 08 00 00 00 00 00 00 00 40 | |
| * WPA Versions 0x2 | |
| * pairwise=0xfac04 | |
| * group=0xfac02 | |
| * akm=0xfac01 | |
| * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| nl80211: Association request send successfully | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp1s0b1 | |
| nl80211: MLME event 38 (NL80211_CMD_ASSOCIATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=72): 10 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 70 ec 31 04 00 00 a7 c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| nl80211: Associate event | |
| wlp1s0b1: Event ASSOC (0) received | |
| wlp1s0b1: Association info event | |
| resp_ies - hexdump(len=42): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| WPA: WMM Parameter Element - hexdump(len=24): 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: freq=2412 MHz | |
| wlp1s0b1: State: ASSOCIATING -> ASSOCIATED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| wlp1s0b1: Associated to a new BSS: BSSID=00:3a:99:04:bf:42 | |
| wlp1s0b1: Associated with 00:3a:99:04:bf:42 | |
| wlp1s0b1: WPA: Association event - clear replay counter | |
| wlp1s0b1: WPA: Clear old PTK | |
| TDLS: Remove peers on association | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| EAPOL: External notification - portEnabled=1 | |
| EAPOL: SUPP_PAE entering state CONNECTING | |
| EAPOL: enable timer tick | |
| EAPOL: SUPP_BE entering state IDLE | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| wlp1s0b1: Setting authentication timeout: 10 sec 0 usec | |
| wlp1s0b1: Cancelling scan request | |
| WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0 | |
| WMM AC: U-APSD queues=0x0 | |
| WMM AC: Valid WMM association, WMM AC is enabled | |
| nl80211: Event message available | |
| nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp1s0b1 | |
| nl80211: Ignore connect event (cmd=46) when using userspace SME | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Setting authentication timeout: 70 sec 0 usec | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_PAE entering state RESTART | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_PAE entering state AUTHENTICATING | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state IDENTITY | |
| wlp1s0b1: CTRL-EVENT-EAP-STARTED EAP authentication started | |
| EAP: Status notification: started (param=) | |
| EAP: EAP-Request Identity data - hexdump_ascii(len=41): | |
| 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f _networkid=eduro | |
| 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c am,nasid=WiFi-B, | |
| 70 6f 72 74 69 64 3d 32 39 portid=29 | |
| EAP: using real identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:99:04:bf:42 | |
| TX EAPOL - hexdump(len=21): 01 00 00 11 02 01 00 11 01 66 70 6d 2e 53 69 6e 79 61 6b 53 41 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=3 | |
| * type=0 | |
| * alpha2=RU | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=RU | |
| nl80211: Regulatory information - country=RU (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 40 MHz 20 mBm | |
| nl80211: 5250-5330 @ 40 MHz 20 mBm (DFS) | |
| nl80211: 5650-5730 @ 40 MHz 30 mBm (DFS) | |
| nl80211: 5735-5835 @ 40 MHz 30 mBm | |
| nl80211: 57000-66000 @ 2160 MHz 40 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=10 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=10): 02 00 00 06 01 02 00 06 19 20 | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=2 method=25 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state GET_METHOD | |
| wlp1s0b1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25 | |
| EAP: Status notification: accept proposed method (param=PEAP) | |
| EAP: Initialize selected EAP method: vendor 0 method 25 (PEAP) | |
| EAP-PEAP: Forced PEAP version 0 | |
| TLS: Phase2 EAP types - hexdump(len=8): 00 00 00 00 1a 00 00 00 | |
| TLS: using phase1 config options | |
| TLS: Trusted root certificate(s) loaded | |
| wlp1s0b1: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected | |
| EAP: EAP entering state METHOD | |
| SSL: Received packet(len=6) - Flags 0x20 | |
| EAP-PEAP: Start (server ver=0, own ver=0) | |
| EAP-PEAP: Using PEAP version 0 | |
| SSL: (where=0x10 ret=0x1) | |
| SSL: (where=0x1001 ret=0x1) | |
| SSL: SSL_connect:before/connect initialization | |
| OpenSSL: TX ver=0x303 content_type=256 | |
| OpenSSL: Message - hexdump(len=5): [REMOVED] | |
| OpenSSL: TX ver=0x303 content_type=22 | |
| OpenSSL: Message - hexdump(len=298): [REMOVED] | |
| SSL: (where=0x1001 ret=0x1) | |
| SSL: SSL_connect:SSLv2/v3 write client hello A | |
| SSL: (where=0x1002 ret=0xffffffff) | |
| SSL: SSL_connect:error in SSLv2/v3 read server hello A | |
| SSL: SSL_connect - want more data | |
| SSL: 303 bytes pending from ssl_out | |
| SSL: 303 bytes left to be sent out (of total 303 bytes) | |
| EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL eapRespData=0x19685c0 | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:99:04:bf:42 | |
| TX EAPOL - hexdump(len=317): 01 00 01 39 02 02 01 39 19 80 00 00 01 2f 16 03 01 01 2a 01 00 01 26 03 03 43 77 a2 2f c9 e1 56 2d 7f 7f 75 b6 12 50 df 77 80 88 f0 cb fb 84 07 74 15 8d 49 96 ec 71 c4 ab 00 00 ac c0 30 c0 2c c0 28 c0 24 c0 14 c0 0a 00 a5 00 a3 00 a1 00 9f 00 6b 00 6a 00 69 00 68 00 39 00 38 00 37 00 36 00 88 00 87 00 86 00 85 c0 32 c0 2e c0 2a c0 26 c0 0f c0 05 00 9d 00 3d 00 35 00 84 c0 2f c0 2b c0 27 c0 23 c0 13 c0 09 00 a4 00 a2 00 a0 00 9e 00 67 00 40 00 3f 00 3e 00 33 00 32 00 31 00 30 00 9a 00 99 00 98 00 97 00 45 00 44 00 43 00 42 c0 31 c0 2d c0 29 c0 25 c0 0e c0 04 00 9c 00 3c 00 2f 00 96 00 41 00 07 c0 11 c0 07 c0 0c c0 02 00 05 00 04 c0 12 c0 08 00 16 00 13 00 10 00 0d c0 0d c0 03 00 0a 00 ff 01 00 00 51 00 0b 00 04 03 00 01 02 00 0a 00 1c 00 1a 00 17 00 19 00 1c 00 1b 00 18 00 1a 00 16 00 0e 00 0d 00 0b 00 0c 00 09 00 0a 00 0d 00 20 00 1e 06 01 06 02 06 03 05 01 05 02 05 03 04 01 04 02 04 03 03 01 03 02 03 03 02 01 02 02 02 03 00 0f 00 01 01 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=8 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=8): 02 00 00 04 04 02 00 04 | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Failure | |
| EAP: Status notification: completion (param=failure) | |
| EAP: EAP entering state FAILURE | |
| wlp1s0b1: CTRL-EVENT-EAP-FAILURE EAP authentication failed | |
| EAPOL: SUPP_PAE entering state HELD | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Set supplicant port unauthorized for 00:3a:99:04:bf:42 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| EAPOL: SUPP_BE entering state FAIL | |
| EAPOL: SUPP_BE entering state IDLE | |
| EAPOL authentication completed - result=FAILURE | |
| wlp1s0b1: Setting authentication timeout: 2 sec 0 usec | |
| EAPOL: startWhen --> 0 | |
| wlp1s0b1: Authentication with 00:3a:99:04:bf:42 timed out. | |
| Added BSSID 00:3a:99:04:bf:42 into blacklist | |
| TDLS: Remove peers on disassociation | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: Request to deauthenticate - bssid=00:3a:99:04:bf:42 pending_bssid=00:00:00:00:00:00 reason=3 state=ASSOCIATED | |
| TDLS: Tear down peers | |
| wpa_driver_nl80211_deauthenticate(addr=00:3a:99:04:bf:42 reason_code=3) | |
| wlp1s0b1: Event DEAUTH (12) received | |
| wlp1s0b1: Deauthentication notification | |
| wlp1s0b1: * reason 3 (locally generated) | |
| Deauthentication frame IE(s) - hexdump(len=0): [NULL] | |
| wlp1s0b1: CTRL-EVENT-DISCONNECTED bssid=00:3a:99:04:bf:42 reason=3 locally_generated=1 | |
| wlp1s0b1: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="eduroam" auth_failures=1 duration=10 reason=AUTH_FAILED | |
| wlp1s0b1: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=6) | |
| wlp1s0b1: Setting scan request: 0.100000 sec | |
| wlp1s0b1: Radio work 'sme-connect'@0x1966f70 done in 2.084688 seconds | |
| BSSID 00:3a:99:04:bf:42 blacklist count incremented to 2 | |
| wlp1s0b1: Blacklist count 2 --> request scan in 500 ms | |
| wlp1s0b1: Ignore new scan request for 0.500000 sec since an earlier request is scheduled to trigger sooner | |
| TDLS: Remove peers on disassociation | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: Disconnect event - remove keys | |
| wlp1s0b1: State: ASSOCIATED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WMM AC: WMM AC is disabled | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: SUPP_PAE entering state DISCONNECTED | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Skip set_supp_port(unauthorized) while not associated | |
| EAPOL: SUPP_BE entering state INITIALIZE | |
| EAP: EAP entering state DISABLED | |
| EAPOL: External notification - portValid=0 | |
| wlp1s0b1: State: DISCONNECTED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| wlp1s0b1: Ignore new scan request for 1.000000 sec since an earlier request is scheduled to trigger sooner | |
| nl80211: Event message available | |
| nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp1s0b1 | |
| nl80211: Delete station 00:3a:99:04:bf:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=00:3a:99:04:bf:42 A2=74:2f:68:d2:b1:f3 | |
| nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 00 3a 99 04 bf 42 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 00 03 00 | |
| nl80211: Deauthenticate event | |
| nl80211: Ignore deauth event triggered due to own deauth request | |
| nl80211: Event message available | |
| nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlp1s0b1 | |
| nl80211: Ignore disconnect event when using userspace SME | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=0 | |
| * type=1 | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD | |
| nl80211: Regulatory information - country=00 | |
| nl80211: 2402-2472 @ 40 MHz 20 mBm | |
| nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR) | |
| nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR) | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 57240-63720 @ 2160 MHz 0 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=1 | |
| * type=0 | |
| * alpha2=BY | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=BY | |
| nl80211: Regulatory information - country=BY (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) | |
| nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS) | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Add radio work 'scan'@0x1968870 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1968870 after 0.000021 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000056 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.666307 seconds | |
| nl80211: Received scan results (4 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 5 | |
| wlp1s0b1: BSS: Remove id 3 BSSID 00:3a:9a:00:7c:13 SSID 'test' due to no match in scan | |
| dbus: Unregister BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/3' | |
| wlp1s0b1: BSS: Remove id 4 BSSID 00:3a:98:f5:90:e2 SSID 'eduroam' due to no match in scan | |
| dbus: Unregister BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/4' | |
| BSS: last_scan_res_used=4/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1968870 done in 0.667492 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-69 | |
| wlp1s0b1: skip - disabled temporarily for 10 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-69 | |
| wlp1s0b1: skip - blacklisted (count=2 limit=0) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-78 | |
| wlp1s0b1: skip - disabled temporarily for 10 second(s) | |
| wlp1s0b1: 3: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-81 | |
| wlp1s0b1: skip - disabled temporarily for 10 second(s) | |
| wlp1s0b1: No APs found - clear blacklist and try again | |
| Removed BSSID 00:3a:99:04:bf:42 from blacklist (clear) | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-69 | |
| wlp1s0b1: skip - disabled temporarily for 10 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-69 | |
| wlp1s0b1: skip - disabled temporarily for 10 second(s) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-78 | |
| wlp1s0b1: skip - disabled temporarily for 10 second(s) | |
| wlp1s0b1: 3: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-81 | |
| wlp1s0b1: skip - disabled temporarily for 10 second(s) | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Setting scan request: 5.000000 sec | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| EAPOL: disable timer tick | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| wlp1s0b1: Add radio work 'scan'@0x1968870 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1968870 after 0.000020 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000057 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.660380 seconds | |
| nl80211: Received scan results (4 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 6 | |
| BSS: last_scan_res_used=4/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1968870 done in 0.661157 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-58 | |
| wlp1s0b1: skip - disabled temporarily for 4 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-66 | |
| wlp1s0b1: skip - disabled temporarily for 4 second(s) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-78 | |
| wlp1s0b1: skip - disabled temporarily for 4 second(s) | |
| wlp1s0b1: 3: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-81 | |
| wlp1s0b1: skip - disabled temporarily for 4 second(s) | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Setting scan request: 5.000000 sec | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| wlp1s0b1: Add radio work 'scan'@0x1968870 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1968870 after 0.000022 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000079 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.659134 seconds | |
| nl80211: Received scan results (4 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 7 | |
| BSS: last_scan_res_used=4/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1968870 done in 0.659956 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-58 | |
| wlp1s0b1: CTRL-EVENT-SSID-REENABLED id=0 ssid="eduroam" | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-58 | |
| wlp1s0b1: selected based on RSN IE | |
| wlp1s0b1: selected BSS 00:3a:99:04:bf:42 ssid='eduroam' | |
| wlp1s0b1: Considering connect request: reassociate: 1 selected: 00:3a:99:04:bf:42 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x19668f0 current_ssid=(nil) | |
| wlp1s0b1: Request association with 00:3a:99:04:bf:42 | |
| wlp1s0b1: Re-association to the same ESS | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=9): 00 07 65 64 75 72 6f 61 6d | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=3): 03 01 01 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=8): 07 06 52 55 20 01 0d 14 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=7): 0b 05 18 00 44 00 00 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=3): 2a 01 00 | |
| WPA: RSN IE in EAPOL-Key - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=32): 85 1e 0d 00 8f 00 0f 00 ff 03 59 00 41 50 2d 6c 69 62 2d 32 00 00 00 00 00 00 00 00 18 00 00 27 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=8): 96 06 00 40 96 00 0e 00 | |
| WPA: WMM Parameter Element - hexdump(len=24): 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: Add radio work 'sme-connect'@0x1968870 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'sme-connect'@0x1968870 after 0.000027 second wait | |
| wlp1s0b1: Automatic auth_alg selection: 0x1 | |
| RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=1 | |
| RSN: Search for BSSID 00:3a:99:04:bf:42 | |
| RSN: Consider 00:3a:99:04:bf:42 for OKC | |
| RSN: No PMKSA cache entry found | |
| wlp1s0b1: RSN: using IEEE 802.11i/D9.0 | |
| wlp1s0b1: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2 | |
| wlp1s0b1: WPA: Selected mgmt group cipher 32 | |
| wlp1s0b1: WPA: clearing AP WPA IE | |
| WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| wlp1s0b1: WPA: using GTK TKIP | |
| wlp1s0b1: WPA: using PTK CCMP | |
| wlp1s0b1: WPA: using KEY_MGMT 802.1X | |
| wlp1s0b1: WPA: not using MGMT group cipher | |
| WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| RRM: Determining whether RRM can be used - device support: 0x0 | |
| RRM: No RRM in network | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: SME: Trying to authenticate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: SCANNING -> AUTHENTICATING | |
| EAPOL: External notification - EAP success=0 | |
| EAPOL: External notification - EAP fail=0 | |
| EAPOL: External notification - portControl=Auto | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| nl80211: Authenticate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=0): [NULL] | |
| * Auth Type 0 | |
| nl80211: Authentication request send successfully | |
| nl80211: Event message available | |
| nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp1s0b1 | |
| nl80211: New station 00:3a:99:04:bf:42 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| nl80211: Event message available | |
| nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=30): b0 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 a0 01 00 00 02 00 00 00 | |
| nl80211: Authenticate event | |
| wlp1s0b1: Event AUTH (11) received | |
| wlp1s0b1: SME: Authentication response: peer=00:3a:99:04:bf:42 auth_type=0 auth_transaction=2 status_code=0 | |
| SME: Authentication response IEs - hexdump(len=0): [NULL] | |
| wlp1s0b1: set_disable_max_amsdu: -1 | |
| wlp1s0b1: set_ampdu_factor: -1 | |
| wlp1s0b1: set_ampdu_density: -1 | |
| wlp1s0b1: set_disable_ht40: 0 | |
| wlp1s0b1: set_disable_sgi: 0 | |
| wlp1s0b1: set_disable_ldpc: 0 | |
| wlp1s0b1: Trying to associate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: AUTHENTICATING -> ASSOCIATING | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| nl80211: Associate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 7f 08 00 00 00 00 00 00 00 40 | |
| * WPA Versions 0x2 | |
| * pairwise=0xfac04 | |
| * group=0xfac02 | |
| * akm=0xfac01 | |
| * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| nl80211: Association request send successfully | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp1s0b1 | |
| nl80211: MLME event 38 (NL80211_CMD_ASSOCIATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=72): 10 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 b0 01 31 00 00 00 a7 c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| nl80211: Associate event | |
| wlp1s0b1: Event ASSOC (0) received | |
| wlp1s0b1: Association info event | |
| resp_ies - hexdump(len=42): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| WPA: WMM Parameter Element - hexdump(len=24): 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: freq=2412 MHz | |
| wlp1s0b1: State: ASSOCIATING -> ASSOCIATED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| wlp1s0b1: Associated to a new BSS: BSSID=00:3a:99:04:bf:42 | |
| wlp1s0b1: Associated with 00:3a:99:04:bf:42 | |
| wlp1s0b1: WPA: Association event - clear replay counter | |
| wlp1s0b1: WPA: Clear old PTK | |
| TDLS: Remove peers on association | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| EAPOL: External notification - portEnabled=1 | |
| EAPOL: SUPP_PAE entering state CONNECTING | |
| EAPOL: enable timer tick | |
| EAPOL: SUPP_BE entering state IDLE | |
| EAP: EAP entering state INITIALIZE | |
| EAP: deinitialize previously used EAP method (25, PEAP) at INITIALIZE | |
| ENGINE: engine deinit | |
| EAP: EAP entering state IDLE | |
| wlp1s0b1: Setting authentication timeout: 10 sec 0 usec | |
| wlp1s0b1: Cancelling scan request | |
| WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0 | |
| WMM AC: U-APSD queues=0x0 | |
| WMM AC: Valid WMM association, WMM AC is enabled | |
| nl80211: Event message available | |
| nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp1s0b1 | |
| nl80211: Ignore connect event (cmd=46) when using userspace SME | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Setting authentication timeout: 70 sec 0 usec | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_PAE entering state RESTART | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_PAE entering state AUTHENTICATING | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state IDENTITY | |
| wlp1s0b1: CTRL-EVENT-EAP-STARTED EAP authentication started | |
| EAP: Status notification: started (param=) | |
| EAP: EAP-Request Identity data - hexdump_ascii(len=41): | |
| 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f _networkid=eduro | |
| 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c am,nasid=WiFi-B, | |
| 70 6f 72 74 69 64 3d 32 39 portid=29 | |
| EAP: using real identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:99:04:bf:42 | |
| TX EAPOL - hexdump(len=21): 01 00 00 11 02 01 00 11 01 66 70 6d 2e 53 69 6e 79 61 6b 53 41 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=3 | |
| * type=0 | |
| * alpha2=RU | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=RU | |
| nl80211: Regulatory information - country=RU (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 40 MHz 20 mBm | |
| nl80211: 5250-5330 @ 40 MHz 20 mBm (DFS) | |
| nl80211: 5650-5730 @ 40 MHz 30 mBm (DFS) | |
| nl80211: 5735-5835 @ 40 MHz 30 mBm | |
| nl80211: 57000-66000 @ 2160 MHz 40 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=10 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=10): 02 00 00 06 01 02 00 06 19 20 | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=2 method=25 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state GET_METHOD | |
| wlp1s0b1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25 | |
| EAP: Status notification: accept proposed method (param=PEAP) | |
| EAP: Initialize selected EAP method: vendor 0 method 25 (PEAP) | |
| EAP-PEAP: Forced PEAP version 0 | |
| TLS: Phase2 EAP types - hexdump(len=8): 00 00 00 00 1a 00 00 00 | |
| TLS: using phase1 config options | |
| TLS: Trusted root certificate(s) loaded | |
| wlp1s0b1: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected | |
| EAP: EAP entering state METHOD | |
| SSL: Received packet(len=6) - Flags 0x20 | |
| EAP-PEAP: Start (server ver=0, own ver=0) | |
| EAP-PEAP: Using PEAP version 0 | |
| SSL: (where=0x10 ret=0x1) | |
| SSL: (where=0x1001 ret=0x1) | |
| SSL: SSL_connect:before/connect initialization | |
| OpenSSL: TX ver=0x303 content_type=256 | |
| OpenSSL: Message - hexdump(len=5): [REMOVED] | |
| OpenSSL: TX ver=0x303 content_type=22 | |
| OpenSSL: Message - hexdump(len=298): [REMOVED] | |
| SSL: (where=0x1001 ret=0x1) | |
| SSL: SSL_connect:SSLv2/v3 write client hello A | |
| SSL: (where=0x1002 ret=0xffffffff) | |
| SSL: SSL_connect:error in SSLv2/v3 read server hello A | |
| SSL: SSL_connect - want more data | |
| SSL: 303 bytes pending from ssl_out | |
| SSL: 303 bytes left to be sent out (of total 303 bytes) | |
| EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL eapRespData=0x1966310 | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:99:04:bf:42 | |
| TX EAPOL - hexdump(len=317): 01 00 01 39 02 02 01 39 19 80 00 00 01 2f 16 03 01 01 2a 01 00 01 26 03 03 36 58 67 a5 82 dd 3f c9 7d 05 fd 11 63 ee d0 f9 5b 07 34 95 af bb 2f 02 8a 5c ef 11 e2 8a 15 dc 00 00 ac c0 30 c0 2c c0 28 c0 24 c0 14 c0 0a 00 a5 00 a3 00 a1 00 9f 00 6b 00 6a 00 69 00 68 00 39 00 38 00 37 00 36 00 88 00 87 00 86 00 85 c0 32 c0 2e c0 2a c0 26 c0 0f c0 05 00 9d 00 3d 00 35 00 84 c0 2f c0 2b c0 27 c0 23 c0 13 c0 09 00 a4 00 a2 00 a0 00 9e 00 67 00 40 00 3f 00 3e 00 33 00 32 00 31 00 30 00 9a 00 99 00 98 00 97 00 45 00 44 00 43 00 42 c0 31 c0 2d c0 29 c0 25 c0 0e c0 04 00 9c 00 3c 00 2f 00 96 00 41 00 07 c0 11 c0 07 c0 0c c0 02 00 05 00 04 c0 12 c0 08 00 16 00 13 00 10 00 0d c0 0d c0 03 00 0a 00 ff 01 00 00 51 00 0b 00 04 03 00 01 02 00 0a 00 1c 00 1a 00 17 00 19 00 1c 00 1b 00 18 00 1a 00 16 00 0e 00 0d 00 0b 00 0c 00 09 00 0a 00 0d 00 20 00 1e 06 01 06 02 06 03 05 01 05 02 05 03 04 01 04 02 04 03 03 01 03 02 03 03 02 01 02 02 02 03 00 0f 00 01 01 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=8 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=8): 02 00 00 04 04 02 00 04 | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Failure | |
| EAP: Status notification: completion (param=failure) | |
| EAP: EAP entering state FAILURE | |
| wlp1s0b1: CTRL-EVENT-EAP-FAILURE EAP authentication failed | |
| EAPOL: SUPP_PAE entering state HELD | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Set supplicant port unauthorized for 00:3a:99:04:bf:42 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| EAPOL: SUPP_BE entering state FAIL | |
| EAPOL: SUPP_BE entering state IDLE | |
| EAPOL authentication completed - result=FAILURE | |
| wlp1s0b1: Setting authentication timeout: 2 sec 0 usec | |
| EAPOL: startWhen --> 0 | |
| wlp1s0b1: Authentication with 00:3a:99:04:bf:42 timed out. | |
| Added BSSID 00:3a:99:04:bf:42 into blacklist | |
| TDLS: Remove peers on disassociation | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: Request to deauthenticate - bssid=00:3a:99:04:bf:42 pending_bssid=00:00:00:00:00:00 reason=3 state=ASSOCIATED | |
| TDLS: Tear down peers | |
| wpa_driver_nl80211_deauthenticate(addr=00:3a:99:04:bf:42 reason_code=3) | |
| wlp1s0b1: Event DEAUTH (12) received | |
| wlp1s0b1: Deauthentication notification | |
| wlp1s0b1: * reason 3 (locally generated) | |
| Deauthentication frame IE(s) - hexdump(len=0): [NULL] | |
| wlp1s0b1: CTRL-EVENT-DISCONNECTED bssid=00:3a:99:04:bf:42 reason=3 locally_generated=1 | |
| wlp1s0b1: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="eduroam" auth_failures=2 duration=23 reason=AUTH_FAILED | |
| wlp1s0b1: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=6) | |
| wlp1s0b1: Setting scan request: 0.100000 sec | |
| wlp1s0b1: Radio work 'sme-connect'@0x1968870 done in 2.051584 seconds | |
| BSSID 00:3a:99:04:bf:42 blacklist count incremented to 2 | |
| Continuous association failures - consider temporary network disabling | |
| wlp1s0b1: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="eduroam" auth_failures=3 duration=46 reason=CONN_FAILED | |
| wlp1s0b1: Blacklist count 4 --> request scan in 5000 ms | |
| wlp1s0b1: Ignore new scan request for 5.000000 sec since an earlier request is scheduled to trigger sooner | |
| TDLS: Remove peers on disassociation | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: Disconnect event - remove keys | |
| wlp1s0b1: State: ASSOCIATED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WMM AC: WMM AC is disabled | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: SUPP_PAE entering state DISCONNECTED | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Skip set_supp_port(unauthorized) while not associated | |
| EAPOL: SUPP_BE entering state INITIALIZE | |
| EAP: EAP entering state DISABLED | |
| EAPOL: External notification - portValid=0 | |
| wlp1s0b1: State: DISCONNECTED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| wlp1s0b1: Ignore new scan request for 1.000000 sec since an earlier request is scheduled to trigger sooner | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp1s0b1 | |
| nl80211: Delete station 00:3a:99:04:bf:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=00:3a:99:04:bf:42 A2=74:2f:68:d2:b1:f3 | |
| nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 00 3a 99 04 bf 42 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 00 03 00 | |
| nl80211: Deauthenticate event | |
| nl80211: Ignore deauth event triggered due to own deauth request | |
| nl80211: Event message available | |
| nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlp1s0b1 | |
| nl80211: Ignore disconnect event when using userspace SME | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=0 | |
| * type=1 | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD | |
| nl80211: Regulatory information - country=00 | |
| nl80211: 2402-2472 @ 40 MHz 20 mBm | |
| nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR) | |
| nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR) | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 57240-63720 @ 2160 MHz 0 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=1 | |
| * type=0 | |
| * alpha2=BY | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=BY | |
| nl80211: Regulatory information - country=BY (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) | |
| nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS) | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Add radio work 'scan'@0x1966de0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1966de0 after 0.000020 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000059 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.661272 seconds | |
| nl80211: Received scan results (4 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 8 | |
| BSS: last_scan_res_used=4/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1966de0 done in 0.662002 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-58 | |
| wlp1s0b1: skip - disabled temporarily for 46 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-67 | |
| wlp1s0b1: skip - blacklisted (count=2 limit=0) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-78 | |
| wlp1s0b1: skip - disabled temporarily for 46 second(s) | |
| wlp1s0b1: 3: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 46 second(s) | |
| wlp1s0b1: No APs found - clear blacklist and try again | |
| Removed BSSID 00:3a:99:04:bf:42 from blacklist (clear) | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-58 | |
| wlp1s0b1: skip - disabled temporarily for 46 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-67 | |
| wlp1s0b1: skip - disabled temporarily for 46 second(s) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-78 | |
| wlp1s0b1: skip - disabled temporarily for 46 second(s) | |
| wlp1s0b1: 3: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 46 second(s) | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Setting scan request: 5.000000 sec | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| EAPOL: disable timer tick | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| wlp1s0b1: Add radio work 'scan'@0x1966de0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1966de0 after 0.000020 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000086 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.658717 seconds | |
| nl80211: Received scan results (5 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 9 | |
| wlp1s0b1: BSS: Add new id 6 BSSID 00:3a:9a:00:7c:13 SSID 'test' | |
| dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/6' | |
| BSS: last_scan_res_used=5/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1966de0 done in 0.659795 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-57 | |
| wlp1s0b1: skip - disabled temporarily for 40 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-66 | |
| wlp1s0b1: skip - disabled temporarily for 40 second(s) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 40 second(s) | |
| wlp1s0b1: 3: 00:3a:9a:00:7c:13 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 40 second(s) | |
| wlp1s0b1: 4: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 40 second(s) | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Setting scan request: 5.000000 sec | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/6) [s] | |
| dbus: fi.w1.wpa_supplicant1.Interface.Disconnect (/fi/w1/wpa_supplicant1/Interfaces/1) [] | |
| dbus: fi.w1.wpa_supplicant1.Interface.RemoveNetwork (/fi/w1/wpa_supplicant1/Interfaces/1) [o] | |
| dbus: Unregister network object '/fi/w1/wpa_supplicant1/Interfaces/1/Networks/0' | |
| dbus: fi.w1.wpa_supplicant1.Interface.Disconnect (/fi/w1/wpa_supplicant1/Interfaces/1) [] | |
| dbus: fi.w1.wpa_supplicant1.Interface.Disconnect (/fi/w1/wpa_supplicant1/Interfaces/1) [] | |
| dbus: org.freedesktop.DBus.Properties.Set (/fi/w1/wpa_supplicant1/Interfaces/1) [ssv] | |
| properties_get_or_set: Set(ApScan) | |
| dbus: fi.w1.wpa_supplicant1.Interface.AddNetwork (/fi/w1/wpa_supplicant1/Interfaces/1) [a{sv}] | |
| dbus: Register network object '/fi/w1/wpa_supplicant1/Interfaces/1/Networks/0' | |
| wpa_dbus_dict_open_read: start reading a dict entry | |
| wpa_dbus_dict_get_entry: dict entry key: proactive_key_caching | |
| wpa_dbus_dict_get_entry: dict entry variant content type: i | |
| _wpa_dbus_dict_fill_value_from_variant: int32 value: 1 | |
| proactive_key_caching=1 (0x1) | |
| EAP: deinitialize previously used EAP method (25, PEAP) at invalidate | |
| ENGINE: engine deinit | |
| wpa_dbus_dict_get_entry: dict entry key: password | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=6): [REMOVED] | |
| password - hexdump_ascii(len=6): [REMOVED] | |
| wpa_dbus_dict_get_entry: dict entry key: phase1 | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| phase1 - hexdump_ascii(len=9): | |
| 70 65 61 70 76 65 72 3d 30 peapver=0 | |
| wpa_dbus_dict_get_entry: dict entry key: eap | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00 | |
| wpa_dbus_dict_get_entry: dict entry key: phase2 | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| phase2 - hexdump_ascii(len=13): | |
| 61 75 74 68 3d 4d 53 43 48 41 50 56 32 auth=MSCHAPV2 | |
| wpa_dbus_dict_get_entry: dict entry key: ca_path | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=14): [REMOVED] | |
| ca_path - hexdump_ascii(len=14): | |
| 2f 65 74 63 2f 73 73 6c 2f 63 65 72 74 73 /etc/ssl/certs | |
| wpa_dbus_dict_get_entry: dict entry key: ssid | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=7): [REMOVED] | |
| ssid - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wpa_dbus_dict_get_entry: dict entry key: key_mgmt | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| key_mgmt: 0x1 | |
| wpa_dbus_dict_get_entry: dict entry key: identity | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=12): [REMOVED] | |
| identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| wpa_dbus_dict_get_entry: dict entry key: scan_ssid | |
| wpa_dbus_dict_get_entry: dict entry variant content type: i | |
| _wpa_dbus_dict_fill_value_from_variant: int32 value: 1 | |
| scan_ssid=1 (0x1) | |
| wpa_dbus_dict_get_entry: dict entry key: fragment_size | |
| wpa_dbus_dict_get_entry: dict entry variant content type: i | |
| _wpa_dbus_dict_fill_value_from_variant: int32 value: 1266 | |
| fragment_size=1266 (0x4f2) | |
| wpa_dbus_dict_get_entry: dict entry key: ca_path2 | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=14): [REMOVED] | |
| ca_path2 - hexdump_ascii(len=14): | |
| 2f 65 74 63 2f 73 73 6c 2f 63 65 72 74 73 /etc/ssl/certs | |
| wpa_dbus_dict_get_entry: dict entry key: bgscan | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=17): [REMOVED] | |
| bgscan - hexdump_ascii(len=17): | |
| 73 69 6d 70 6c 65 3a 33 30 3a 2d 36 35 3a 33 30 simple:30:-65:30 | |
| 30 0 | |
| dbus: fi.w1.wpa_supplicant1.Interface.SelectNetwork (/fi/w1/wpa_supplicant1/Interfaces/1) [o] | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-57 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-66 | |
| wlp1s0b1: selected based on RSN IE | |
| wlp1s0b1: selected BSS 00:3a:99:04:bf:42 ssid='eduroam' | |
| wlp1s0b1: Considering connect request: reassociate: 1 selected: 00:3a:99:04:bf:42 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x19668f0 current_ssid=0x19668f0 | |
| wlp1s0b1: Request association with 00:3a:99:04:bf:42 | |
| wlp1s0b1: Re-association to the same ESS | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=9): 00 07 65 64 75 72 6f 61 6d | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=3): 03 01 01 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=8): 07 06 52 55 20 01 0d 14 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=7): 0b 05 19 00 33 00 00 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=3): 2a 01 00 | |
| WPA: RSN IE in EAPOL-Key - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=32): 85 1e 14 00 8f 00 0f 00 ff 03 59 00 41 50 2d 6c 69 62 2d 32 00 00 00 00 00 00 00 00 19 00 00 27 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=8): 96 06 00 40 96 00 0e 00 | |
| WPA: WMM Parameter Element - hexdump(len=24): 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: Add radio work 'sme-connect'@0x193ddc0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'sme-connect'@0x193ddc0 after 0.000274 second wait | |
| wlp1s0b1: Automatic auth_alg selection: 0x1 | |
| RSN: PMKSA cache search - network_ctx=0x19668f0 try_opportunistic=1 | |
| RSN: Search for BSSID 00:3a:99:04:bf:42 | |
| RSN: Consider 00:3a:99:04:bf:42 for OKC | |
| RSN: No PMKSA cache entry found | |
| wlp1s0b1: RSN: using IEEE 802.11i/D9.0 | |
| wlp1s0b1: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2 | |
| wlp1s0b1: WPA: Selected mgmt group cipher 32 | |
| wlp1s0b1: WPA: clearing AP WPA IE | |
| WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| wlp1s0b1: WPA: using GTK TKIP | |
| wlp1s0b1: WPA: using PTK CCMP | |
| wlp1s0b1: WPA: using KEY_MGMT 802.1X | |
| wlp1s0b1: WPA: not using MGMT group cipher | |
| WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| RRM: Determining whether RRM can be used - device support: 0x0 | |
| RRM: No RRM in network | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: SME: Trying to authenticate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: SCANNING -> AUTHENTICATING | |
| EAPOL: External notification - EAP success=0 | |
| EAPOL: External notification - EAP fail=0 | |
| EAPOL: External notification - portControl=Auto | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| nl80211: Authenticate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=0): [NULL] | |
| * Auth Type 0 | |
| nl80211: Authentication request send successfully | |
| nl80211: Event message available | |
| nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp1s0b1 | |
| nl80211: New station 00:3a:99:04:bf:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=30): b0 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 30 15 00 00 02 00 00 00 | |
| nl80211: Authenticate event | |
| wlp1s0b1: Event AUTH (11) received | |
| wlp1s0b1: SME: Authentication response: peer=00:3a:99:04:bf:42 auth_type=0 auth_transaction=2 status_code=0 | |
| SME: Authentication response IEs - hexdump(len=0): [NULL] | |
| wlp1s0b1: set_disable_max_amsdu: -1 | |
| wlp1s0b1: set_ampdu_factor: -1 | |
| wlp1s0b1: set_ampdu_density: -1 | |
| wlp1s0b1: set_disable_ht40: 0 | |
| wlp1s0b1: set_disable_sgi: 0 | |
| wlp1s0b1: set_disable_ldpc: 0 | |
| wlp1s0b1: Trying to associate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: AUTHENTICATING -> ASSOCIATING | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| nl80211: Associate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 7f 08 00 00 00 00 00 00 00 40 | |
| * WPA Versions 0x2 | |
| * pairwise=0xfac04 | |
| * group=0xfac02 | |
| * akm=0xfac01 | |
| * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| nl80211: Association request send successfully | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp1s0b1 | |
| nl80211: MLME event 38 (NL80211_CMD_ASSOCIATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=72): 10 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 40 15 31 00 00 00 a7 c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| nl80211: Associate event | |
| wlp1s0b1: Event ASSOC (0) received | |
| wlp1s0b1: Association info event | |
| resp_ies - hexdump(len=42): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| WPA: WMM Parameter Element - hexdump(len=24): 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: freq=2412 MHz | |
| wlp1s0b1: State: ASSOCIATING -> ASSOCIATED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| wlp1s0b1: Associated to a new BSS: BSSID=00:3a:99:04:bf:42 | |
| wlp1s0b1: Associated with 00:3a:99:04:bf:42 | |
| wlp1s0b1: WPA: Association event - clear replay counter | |
| wlp1s0b1: WPA: Clear old PTK | |
| TDLS: Remove peers on association | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| EAPOL: External notification - portEnabled=1 | |
| EAPOL: SUPP_PAE entering state CONNECTING | |
| EAPOL: enable timer tick | |
| EAPOL: SUPP_BE entering state IDLE | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| wlp1s0b1: Setting authentication timeout: 10 sec 0 usec | |
| wlp1s0b1: Cancelling scan request | |
| WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0 | |
| WMM AC: U-APSD queues=0x0 | |
| WMM AC: Valid WMM association, WMM AC is enabled | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Setting authentication timeout: 70 sec 0 usec | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_PAE entering state RESTART | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_PAE entering state AUTHENTICATING | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state IDENTITY | |
| wlp1s0b1: CTRL-EVENT-EAP-STARTED EAP authentication started | |
| EAP: Status notification: started (param=) | |
| EAP: EAP-Request Identity data - hexdump_ascii(len=41): | |
| 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f _networkid=eduro | |
| 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c am,nasid=WiFi-B, | |
| 70 6f 72 74 69 64 3d 32 39 portid=29 | |
| EAP: using real identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:99:04:bf:42 | |
| TX EAPOL - hexdump(len=21): 01 00 00 11 02 01 00 11 01 66 70 6d 2e 53 69 6e 79 61 6b 53 41 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| nl80211: Event message available | |
| nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp1s0b1 | |
| nl80211: Ignore connect event (cmd=46) when using userspace SME | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=3 | |
| * type=0 | |
| * alpha2=RU | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=RU | |
| nl80211: Regulatory information - country=RU (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 40 MHz 20 mBm | |
| nl80211: 5250-5330 @ 40 MHz 20 mBm (DFS) | |
| nl80211: 5650-5730 @ 40 MHz 30 mBm (DFS) | |
| nl80211: 5735-5835 @ 40 MHz 30 mBm | |
| nl80211: 57000-66000 @ 2160 MHz 40 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| EAPOL: startWhen --> 0 | |
| dbus: fi.w1.wpa_supplicant1.Interface.Disconnect (/fi/w1/wpa_supplicant1/Interfaces/1) [] | |
| wlp1s0b1: Request to deauthenticate - bssid=00:3a:99:04:bf:42 pending_bssid=00:00:00:00:00:00 reason=3 state=ASSOCIATED | |
| TDLS: Tear down peers | |
| wpa_driver_nl80211_deauthenticate(addr=00:3a:99:04:bf:42 reason_code=3) | |
| wlp1s0b1: Event DEAUTH (12) received | |
| wlp1s0b1: Deauthentication notification | |
| wlp1s0b1: * reason 3 (locally generated) | |
| Deauthentication frame IE(s) - hexdump(len=0): [NULL] | |
| wlp1s0b1: CTRL-EVENT-DISCONNECTED bssid=00:3a:99:04:bf:42 reason=3 locally_generated=1 | |
| wlp1s0b1: Auto connect disabled: do not try to re-connect | |
| wlp1s0b1: Radio work 'sme-connect'@0x193ddc0 done in 25.141759 seconds | |
| wlp1s0b1: Ignore connection failure indication since interface has been put into disconnected state | |
| TDLS: Remove peers on disassociation | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: Disconnect event - remove keys | |
| wlp1s0b1: State: ASSOCIATED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WMM AC: WMM AC is disabled | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: SUPP_PAE entering state DISCONNECTED | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Skip set_supp_port(unauthorized) while not associated | |
| EAPOL: SUPP_BE entering state INITIALIZE | |
| EAP: EAP entering state DISABLED | |
| EAPOL: External notification - portValid=0 | |
| wlp1s0b1: State: DISCONNECTED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| dbus: fi.w1.wpa_supplicant1.Interface.RemoveNetwork (/fi/w1/wpa_supplicant1/Interfaces/1) [o] | |
| dbus: Unregister network object '/fi/w1/wpa_supplicant1/Interfaces/1/Networks/0' | |
| dbus: fi.w1.wpa_supplicant1.Interface.Disconnect (/fi/w1/wpa_supplicant1/Interfaces/1) [] | |
| nl80211: Event message available | |
| nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp1s0b1 | |
| nl80211: Delete station 00:3a:99:04:bf:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=00:3a:99:04:bf:42 A2=74:2f:68:d2:b1:f3 | |
| nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 00 3a 99 04 bf 42 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 00 03 00 | |
| nl80211: Deauthenticate event | |
| nl80211: Ignore deauth event triggered due to own deauth request | |
| nl80211: Event message available | |
| nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlp1s0b1 | |
| nl80211: Ignore disconnect event when using userspace SME | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=0 | |
| * type=1 | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD | |
| nl80211: Regulatory information - country=00 | |
| nl80211: 2402-2472 @ 40 MHz 20 mBm | |
| nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR) | |
| nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR) | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 57240-63720 @ 2160 MHz 0 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=1 | |
| * type=0 | |
| * alpha2=BY | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=BY | |
| nl80211: Regulatory information - country=BY (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) | |
| nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS) | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| EAPOL: disable timer tick | |
| dbus: org.freedesktop.DBus.Properties.Set (/fi/w1/wpa_supplicant1/Interfaces/1) [ssv] | |
| properties_get_or_set: Set(ApScan) | |
| dbus: fi.w1.wpa_supplicant1.Interface.AddNetwork (/fi/w1/wpa_supplicant1/Interfaces/1) [a{sv}] | |
| dbus: Register network object '/fi/w1/wpa_supplicant1/Interfaces/1/Networks/0' | |
| wpa_dbus_dict_open_read: start reading a dict entry | |
| wpa_dbus_dict_get_entry: dict entry key: proactive_key_caching | |
| wpa_dbus_dict_get_entry: dict entry variant content type: i | |
| _wpa_dbus_dict_fill_value_from_variant: int32 value: 1 | |
| proactive_key_caching=1 (0x1) | |
| wpa_dbus_dict_get_entry: dict entry key: password | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=6): [REMOVED] | |
| password - hexdump_ascii(len=6): [REMOVED] | |
| wpa_dbus_dict_get_entry: dict entry key: phase1 | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| phase1 - hexdump_ascii(len=9): | |
| 70 65 61 70 76 65 72 3d 30 peapver=0 | |
| wpa_dbus_dict_get_entry: dict entry key: eap | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00 | |
| wpa_dbus_dict_get_entry: dict entry key: phase2 | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| phase2 - hexdump_ascii(len=13): | |
| 61 75 74 68 3d 4d 53 43 48 41 50 56 32 auth=MSCHAPV2 | |
| wpa_dbus_dict_get_entry: dict entry key: ca_path | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=14): [REMOVED] | |
| ca_path - hexdump_ascii(len=14): | |
| 2f 65 74 63 2f 73 73 6c 2f 63 65 72 74 73 /etc/ssl/certs | |
| wpa_dbus_dict_get_entry: dict entry key: ssid | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=7): [REMOVED] | |
| ssid - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wpa_dbus_dict_get_entry: dict entry key: key_mgmt | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| key_mgmt: 0x1 | |
| wpa_dbus_dict_get_entry: dict entry key: identity | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=12): [REMOVED] | |
| identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| wpa_dbus_dict_get_entry: dict entry key: scan_ssid | |
| wpa_dbus_dict_get_entry: dict entry variant content type: i | |
| _wpa_dbus_dict_fill_value_from_variant: int32 value: 1 | |
| scan_ssid=1 (0x1) | |
| wpa_dbus_dict_get_entry: dict entry key: fragment_size | |
| wpa_dbus_dict_get_entry: dict entry variant content type: i | |
| _wpa_dbus_dict_fill_value_from_variant: int32 value: 1266 | |
| fragment_size=1266 (0x4f2) | |
| wpa_dbus_dict_get_entry: dict entry key: ca_path2 | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=14): [REMOVED] | |
| ca_path2 - hexdump_ascii(len=14): | |
| 2f 65 74 63 2f 73 73 6c 2f 63 65 72 74 73 /etc/ssl/certs | |
| wpa_dbus_dict_get_entry: dict entry key: bgscan | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=17): [REMOVED] | |
| bgscan - hexdump_ascii(len=17): | |
| 73 69 6d 70 6c 65 3a 33 30 3a 2d 36 35 3a 33 30 simple:30:-65:30 | |
| 30 0 | |
| dbus: fi.w1.wpa_supplicant1.Interface.SelectNetwork (/fi/w1/wpa_supplicant1/Interfaces/1) [o] | |
| Fast associate: Old scan results | |
| wlp1s0b1: Setting scan request: 0.000000 sec | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| wlp1s0b1: Add radio work 'scan'@0x1969d70 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1969d70 after 0.000016 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000054 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.666808 seconds | |
| nl80211: Received scan results (4 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 10 | |
| BSS: last_scan_res_used=4/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1969d70 done in 0.667581 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-57 | |
| wlp1s0b1: selected based on RSN IE | |
| wlp1s0b1: selected BSS 00:3a:99:04:bf:42 ssid='eduroam' | |
| wlp1s0b1: Considering connect request: reassociate: 1 selected: 00:3a:99:04:bf:42 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x19668f0 current_ssid=0x19668f0 | |
| wlp1s0b1: Request association with 00:3a:99:04:bf:42 | |
| wlp1s0b1: Re-association to the same ESS | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=9): 00 07 65 64 75 72 6f 61 6d | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=3): 03 01 01 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=8): 07 06 52 55 20 01 0d 14 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=7): 0b 05 18 00 24 00 00 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=3): 2a 01 00 | |
| WPA: RSN IE in EAPOL-Key - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=32): 85 1e 0d 00 8f 00 0f 00 ff 03 59 00 41 50 2d 6c 69 62 2d 32 00 00 00 00 00 00 00 00 18 00 00 27 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=8): 96 06 00 40 96 00 0e 00 | |
| WPA: WMM Parameter Element - hexdump(len=24): 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: Add radio work 'sme-connect'@0x1969d70 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'sme-connect'@0x1969d70 after 0.000061 second wait | |
| wlp1s0b1: Automatic auth_alg selection: 0x1 | |
| RSN: PMKSA cache search - network_ctx=0x19668f0 try_opportunistic=1 | |
| RSN: Search for BSSID 00:3a:99:04:bf:42 | |
| RSN: Consider 00:3a:99:04:bf:42 for OKC | |
| RSN: No PMKSA cache entry found | |
| wlp1s0b1: RSN: using IEEE 802.11i/D9.0 | |
| wlp1s0b1: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2 | |
| wlp1s0b1: WPA: Selected mgmt group cipher 32 | |
| wlp1s0b1: WPA: clearing AP WPA IE | |
| WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| wlp1s0b1: WPA: using GTK TKIP | |
| wlp1s0b1: WPA: using PTK CCMP | |
| wlp1s0b1: WPA: using KEY_MGMT 802.1X | |
| wlp1s0b1: WPA: not using MGMT group cipher | |
| WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| RRM: Determining whether RRM can be used - device support: 0x0 | |
| RRM: No RRM in network | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: SME: Trying to authenticate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: SCANNING -> AUTHENTICATING | |
| EAPOL: External notification - EAP success=0 | |
| EAPOL: External notification - EAP fail=0 | |
| EAPOL: External notification - portControl=Auto | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| nl80211: Authenticate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=0): [NULL] | |
| * Auth Type 0 | |
| nl80211: Authentication request send successfully | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp1s0b1 | |
| nl80211: New station 00:3a:99:04:bf:42 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| nl80211: Event message available | |
| nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=30): b0 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 60 3f 00 00 02 00 00 00 | |
| nl80211: Authenticate event | |
| wlp1s0b1: Event AUTH (11) received | |
| wlp1s0b1: SME: Authentication response: peer=00:3a:99:04:bf:42 auth_type=0 auth_transaction=2 status_code=0 | |
| SME: Authentication response IEs - hexdump(len=0): [NULL] | |
| wlp1s0b1: set_disable_max_amsdu: -1 | |
| wlp1s0b1: set_ampdu_factor: -1 | |
| wlp1s0b1: set_ampdu_density: -1 | |
| wlp1s0b1: set_disable_ht40: 0 | |
| wlp1s0b1: set_disable_sgi: 0 | |
| wlp1s0b1: set_disable_ldpc: 0 | |
| wlp1s0b1: Trying to associate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: AUTHENTICATING -> ASSOCIATING | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| nl80211: Associate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 7f 08 00 00 00 00 00 00 00 40 | |
| * WPA Versions 0x2 | |
| * pairwise=0xfac04 | |
| * group=0xfac02 | |
| * akm=0xfac01 | |
| * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| nl80211: Association request send successfully | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp1s0b1 | |
| nl80211: MLME event 38 (NL80211_CMD_ASSOCIATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=72): 10 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 70 3f 31 00 00 00 a7 c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| nl80211: Associate event | |
| wlp1s0b1: Event ASSOC (0) received | |
| wlp1s0b1: Association info event | |
| resp_ies - hexdump(len=42): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| WPA: WMM Parameter Element - hexdump(len=24): 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: freq=2412 MHz | |
| wlp1s0b1: State: ASSOCIATING -> ASSOCIATED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| wlp1s0b1: Associated to a new BSS: BSSID=00:3a:99:04:bf:42 | |
| wlp1s0b1: Associated with 00:3a:99:04:bf:42 | |
| wlp1s0b1: WPA: Association event - clear replay counter | |
| wlp1s0b1: WPA: Clear old PTK | |
| TDLS: Remove peers on association | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| EAPOL: External notification - portEnabled=1 | |
| EAPOL: SUPP_PAE entering state CONNECTING | |
| EAPOL: enable timer tick | |
| EAPOL: SUPP_BE entering state IDLE | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| wlp1s0b1: Setting authentication timeout: 10 sec 0 usec | |
| wlp1s0b1: Cancelling scan request | |
| WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0 | |
| WMM AC: U-APSD queues=0x0 | |
| WMM AC: Valid WMM association, WMM AC is enabled | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Setting authentication timeout: 70 sec 0 usec | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_PAE entering state RESTART | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_PAE entering state AUTHENTICATING | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state IDENTITY | |
| wlp1s0b1: CTRL-EVENT-EAP-STARTED EAP authentication started | |
| EAP: Status notification: started (param=) | |
| EAP: EAP-Request Identity data - hexdump_ascii(len=41): | |
| 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f _networkid=eduro | |
| 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c am,nasid=WiFi-B, | |
| 70 6f 72 74 69 64 3d 32 39 portid=29 | |
| EAP: using real identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:99:04:bf:42 | |
| TX EAPOL - hexdump(len=21): 01 00 00 11 02 01 00 11 01 66 70 6d 2e 53 69 6e 79 61 6b 53 41 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| nl80211: Event message available | |
| nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp1s0b1 | |
| nl80211: Ignore connect event (cmd=46) when using userspace SME | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=3 | |
| * type=0 | |
| * alpha2=RU | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=RU | |
| nl80211: Regulatory information - country=RU (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 40 MHz 20 mBm | |
| nl80211: 5250-5330 @ 40 MHz 20 mBm (DFS) | |
| nl80211: 5650-5730 @ 40 MHz 30 mBm (DFS) | |
| nl80211: 5735-5835 @ 40 MHz 30 mBm | |
| nl80211: 57000-66000 @ 2160 MHz 40 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=10 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=10): 02 00 00 06 01 02 00 06 19 20 | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=2 method=25 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state GET_METHOD | |
| wlp1s0b1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25 | |
| EAP: Status notification: accept proposed method (param=PEAP) | |
| EAP: Initialize selected EAP method: vendor 0 method 25 (PEAP) | |
| EAP-PEAP: Forced PEAP version 0 | |
| TLS: Phase2 EAP types - hexdump(len=8): 00 00 00 00 1a 00 00 00 | |
| TLS: using phase1 config options | |
| TLS: Trusted root certificate(s) loaded | |
| wlp1s0b1: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected | |
| EAP: EAP entering state METHOD | |
| SSL: Received packet(len=6) - Flags 0x20 | |
| EAP-PEAP: Start (server ver=0, own ver=0) | |
| EAP-PEAP: Using PEAP version 0 | |
| SSL: (where=0x10 ret=0x1) | |
| SSL: (where=0x1001 ret=0x1) | |
| SSL: SSL_connect:before/connect initialization | |
| OpenSSL: TX ver=0x303 content_type=256 | |
| OpenSSL: Message - hexdump(len=5): [REMOVED] | |
| OpenSSL: TX ver=0x303 content_type=22 | |
| OpenSSL: Message - hexdump(len=298): [REMOVED] | |
| SSL: (where=0x1001 ret=0x1) | |
| SSL: SSL_connect:SSLv2/v3 write client hello A | |
| SSL: (where=0x1002 ret=0xffffffff) | |
| SSL: SSL_connect:error in SSLv2/v3 read server hello A | |
| SSL: SSL_connect - want more data | |
| SSL: 303 bytes pending from ssl_out | |
| SSL: 303 bytes left to be sent out (of total 303 bytes) | |
| EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL eapRespData=0x1968e80 | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:99:04:bf:42 | |
| TX EAPOL - hexdump(len=317): 01 00 01 39 02 02 01 39 19 80 00 00 01 2f 16 03 01 01 2a 01 00 01 26 03 03 1d 02 6b d2 a6 d0 e3 54 b9 42 bf d0 6b c4 96 a4 23 58 8e 8b 3a 92 27 63 ea a2 38 c9 62 dc 06 36 00 00 ac c0 30 c0 2c c0 28 c0 24 c0 14 c0 0a 00 a5 00 a3 00 a1 00 9f 00 6b 00 6a 00 69 00 68 00 39 00 38 00 37 00 36 00 88 00 87 00 86 00 85 c0 32 c0 2e c0 2a c0 26 c0 0f c0 05 00 9d 00 3d 00 35 00 84 c0 2f c0 2b c0 27 c0 23 c0 13 c0 09 00 a4 00 a2 00 a0 00 9e 00 67 00 40 00 3f 00 3e 00 33 00 32 00 31 00 30 00 9a 00 99 00 98 00 97 00 45 00 44 00 43 00 42 c0 31 c0 2d c0 29 c0 25 c0 0e c0 04 00 9c 00 3c 00 2f 00 96 00 41 00 07 c0 11 c0 07 c0 0c c0 02 00 05 00 04 c0 12 c0 08 00 16 00 13 00 10 00 0d c0 0d c0 03 00 0a 00 ff 01 00 00 51 00 0b 00 04 03 00 01 02 00 0a 00 1c 00 1a 00 17 00 19 00 1c 00 1b 00 18 00 1a 00 16 00 0e 00 0d 00 0b 00 0c 00 09 00 0a 00 0d 00 20 00 1e 06 01 06 02 06 03 05 01 05 02 05 03 04 01 04 02 04 03 03 01 03 02 03 03 02 01 02 02 02 03 00 0f 00 01 01 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=8 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=8): 02 00 00 04 04 02 00 04 | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Failure | |
| EAP: Status notification: completion (param=failure) | |
| EAP: EAP entering state FAILURE | |
| wlp1s0b1: CTRL-EVENT-EAP-FAILURE EAP authentication failed | |
| EAPOL: SUPP_PAE entering state HELD | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Set supplicant port unauthorized for 00:3a:99:04:bf:42 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| EAPOL: SUPP_BE entering state FAIL | |
| EAPOL: SUPP_BE entering state IDLE | |
| EAPOL authentication completed - result=FAILURE | |
| wlp1s0b1: Setting authentication timeout: 2 sec 0 usec | |
| EAPOL: startWhen --> 0 | |
| wlp1s0b1: Authentication with 00:3a:99:04:bf:42 timed out. | |
| Added BSSID 00:3a:99:04:bf:42 into blacklist | |
| TDLS: Remove peers on disassociation | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: Request to deauthenticate - bssid=00:3a:99:04:bf:42 pending_bssid=00:00:00:00:00:00 reason=3 state=ASSOCIATED | |
| TDLS: Tear down peers | |
| wpa_driver_nl80211_deauthenticate(addr=00:3a:99:04:bf:42 reason_code=3) | |
| wlp1s0b1: Event DEAUTH (12) received | |
| wlp1s0b1: Deauthentication notification | |
| wlp1s0b1: * reason 3 (locally generated) | |
| Deauthentication frame IE(s) - hexdump(len=0): [NULL] | |
| wlp1s0b1: CTRL-EVENT-DISCONNECTED bssid=00:3a:99:04:bf:42 reason=3 locally_generated=1 | |
| wlp1s0b1: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="eduroam" auth_failures=1 duration=10 reason=AUTH_FAILED | |
| wlp1s0b1: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=6) | |
| wlp1s0b1: Setting scan request: 0.100000 sec | |
| wlp1s0b1: Radio work 'sme-connect'@0x1969d70 done in 2.047235 seconds | |
| BSSID 00:3a:99:04:bf:42 blacklist count incremented to 2 | |
| Continuous association failures - consider temporary network disabling | |
| wlp1s0b1: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="eduroam" auth_failures=2 duration=37 reason=CONN_FAILED | |
| wlp1s0b1: Blacklist count 6 --> request scan in 10000 ms | |
| wlp1s0b1: Ignore new scan request for 10.000000 sec since an earlier request is scheduled to trigger sooner | |
| TDLS: Remove peers on disassociation | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: Disconnect event - remove keys | |
| wlp1s0b1: State: ASSOCIATED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WMM AC: WMM AC is disabled | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: SUPP_PAE entering state DISCONNECTED | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Skip set_supp_port(unauthorized) while not associated | |
| EAPOL: SUPP_BE entering state INITIALIZE | |
| EAP: EAP entering state DISABLED | |
| EAPOL: External notification - portValid=0 | |
| wlp1s0b1: State: DISCONNECTED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| wlp1s0b1: Ignore new scan request for 1.000000 sec since an earlier request is scheduled to trigger sooner | |
| nl80211: Event message available | |
| nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp1s0b1 | |
| nl80211: Delete station 00:3a:99:04:bf:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=00:3a:99:04:bf:42 A2=74:2f:68:d2:b1:f3 | |
| nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 00 3a 99 04 bf 42 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 00 03 00 | |
| nl80211: Deauthenticate event | |
| nl80211: Ignore deauth event triggered due to own deauth request | |
| nl80211: Event message available | |
| nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlp1s0b1 | |
| nl80211: Ignore disconnect event when using userspace SME | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=0 | |
| * type=1 | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD | |
| nl80211: Regulatory information - country=00 | |
| nl80211: 2402-2472 @ 40 MHz 20 mBm | |
| nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR) | |
| nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR) | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 57240-63720 @ 2160 MHz 0 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=1 | |
| * type=0 | |
| * alpha2=BY | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=BY | |
| nl80211: Regulatory information - country=BY (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) | |
| nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS) | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Add radio work 'scan'@0x19403d0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x19403d0 after 0.000021 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000057 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.660163 seconds | |
| nl80211: Received scan results (5 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 11 | |
| wlp1s0b1: BSS: Add new id 7 BSSID 00:3a:9a:00:7c:32 SSID 'eduroam' | |
| dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/7' | |
| wlp1s0b1: BSS: Remove id 6 BSSID 00:3a:9a:00:7c:13 SSID 'test' due to no match in scan | |
| dbus: Unregister BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/6' | |
| BSS: last_scan_res_used=5/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x19403d0 done in 0.661267 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-58 | |
| wlp1s0b1: skip - disabled temporarily for 36 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-65 | |
| wlp1s0b1: skip - blacklisted (count=2 limit=0) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-79 | |
| wlp1s0b1: skip - disabled temporarily for 36 second(s) | |
| wlp1s0b1: 3: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 36 second(s) | |
| wlp1s0b1: 4: 00:3a:9a:00:7c:32 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-83 | |
| wlp1s0b1: skip - disabled temporarily for 36 second(s) | |
| wlp1s0b1: No APs found - clear blacklist and try again | |
| Removed BSSID 00:3a:99:04:bf:42 from blacklist (clear) | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-58 | |
| wlp1s0b1: skip - disabled temporarily for 36 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-65 | |
| wlp1s0b1: skip - disabled temporarily for 36 second(s) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-79 | |
| wlp1s0b1: skip - disabled temporarily for 36 second(s) | |
| wlp1s0b1: 3: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 36 second(s) | |
| wlp1s0b1: 4: 00:3a:9a:00:7c:32 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-83 | |
| wlp1s0b1: skip - disabled temporarily for 36 second(s) | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Setting scan request: 5.000000 sec | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/7) [s] | |
| EAPOL: disable timer tick | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| wlp1s0b1: Add radio work 'scan'@0x19403d0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x19403d0 after 0.000021 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000070 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.659275 seconds | |
| nl80211: Received scan results (7 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 12 | |
| wlp1s0b1: BSS: Add new id 8 BSSID 00:3a:9a:00:7c:13 SSID 'test' | |
| dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/8' | |
| wlp1s0b1: BSS: Add new id 9 BSSID 00:3a:99:d2:61:60 SSID 'BSU-Conference' | |
| dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/9' | |
| BSS: last_scan_res_used=7/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x19403d0 done in 0.660496 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-58 | |
| wlp1s0b1: skip - disabled temporarily for 31 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-65 | |
| wlp1s0b1: skip - disabled temporarily for 31 second(s) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-79 | |
| wlp1s0b1: skip - disabled temporarily for 31 second(s) | |
| wlp1s0b1: 3: 00:3a:9a:00:7c:13 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 31 second(s) | |
| wlp1s0b1: 4: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 31 second(s) | |
| wlp1s0b1: 5: 00:3a:9a:00:7c:32 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-83 | |
| wlp1s0b1: skip - disabled temporarily for 31 second(s) | |
| wlp1s0b1: 6: 00:3a:99:d2:61:60 ssid='BSU-Conference' wpa_ie_len=0 rsn_ie_len=0 caps=0x431 level=-81 | |
| wlp1s0b1: skip - disabled temporarily for 31 second(s) | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Setting scan request: 5.000000 sec | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/7 | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/8) [s] | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/9) [s] | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| wlp1s0b1: Add radio work 'scan'@0x19403d0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x19403d0 after 0.000021 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000059 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.660637 seconds | |
| nl80211: Received scan results (8 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 13 | |
| wlp1s0b1: BSS: Add new id 10 BSSID 00:3a:98:f5:90:e2 SSID 'eduroam' | |
| dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/10' | |
| BSS: last_scan_res_used=8/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x19403d0 done in 0.661694 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-58 | |
| wlp1s0b1: skip - disabled temporarily for 25 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-65 | |
| wlp1s0b1: skip - disabled temporarily for 25 second(s) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-79 | |
| wlp1s0b1: skip - disabled temporarily for 25 second(s) | |
| wlp1s0b1: 3: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 25 second(s) | |
| wlp1s0b1: 4: 00:3a:9a:00:7c:13 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 25 second(s) | |
| wlp1s0b1: 5: 00:3a:98:f5:90:e2 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-81 | |
| wlp1s0b1: skip - disabled temporarily for 25 second(s) | |
| wlp1s0b1: 6: 00:3a:9a:00:7c:32 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-83 | |
| wlp1s0b1: skip - disabled temporarily for 25 second(s) | |
| wlp1s0b1: 7: 00:3a:99:d2:61:60 ssid='BSU-Conference' wpa_ie_len=0 rsn_ie_len=0 caps=0x431 level=-81 | |
| wlp1s0b1: skip - disabled temporarily for 25 second(s) | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Setting scan request: 5.000000 sec | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/8 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/7 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/9 | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/10) [s] | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| wlp1s0b1: Add radio work 'scan'@0x19403d0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x19403d0 after 0.000021 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000091 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.660248 seconds | |
| nl80211: Received scan results (9 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 14 | |
| wlp1s0b1: BSS: Add new id 11 BSSID 00:3a:99:d2:5a:42 SSID 'eduroam' | |
| dbus: Register BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/11' | |
| BSS: last_scan_res_used=9/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x19403d0 done in 0.661541 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-66 | |
| wlp1s0b1: skip - disabled temporarily for 19 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-67 | |
| wlp1s0b1: skip - disabled temporarily for 19 second(s) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 19 second(s) | |
| wlp1s0b1: 3: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 19 second(s) | |
| wlp1s0b1: 4: 00:3a:9a:00:7c:13 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 19 second(s) | |
| wlp1s0b1: 5: 00:3a:98:f5:90:e2 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 19 second(s) | |
| wlp1s0b1: 6: 00:3a:99:d2:5a:42 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 19 second(s) | |
| wlp1s0b1: 7: 00:3a:9a:00:7c:32 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-83 | |
| wlp1s0b1: skip - disabled temporarily for 19 second(s) | |
| wlp1s0b1: 8: 00:3a:99:d2:61:60 ssid='BSU-Conference' wpa_ie_len=0 rsn_ie_len=0 caps=0x431 level=-81 | |
| wlp1s0b1: skip - disabled temporarily for 19 second(s) | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Setting scan request: 5.000000 sec | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/8 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/10 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/7 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/9 | |
| dbus: org.freedesktop.DBus.Properties.GetAll (/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/11) [s] | |
| dbus: fi.w1.wpa_supplicant1.Interface.Disconnect (/fi/w1/wpa_supplicant1/Interfaces/1) [] | |
| dbus: fi.w1.wpa_supplicant1.Interface.RemoveNetwork (/fi/w1/wpa_supplicant1/Interfaces/1) [o] | |
| dbus: Unregister network object '/fi/w1/wpa_supplicant1/Interfaces/1/Networks/0' | |
| dbus: fi.w1.wpa_supplicant1.Interface.Disconnect (/fi/w1/wpa_supplicant1/Interfaces/1) [] | |
| wlp1s0b1: No enabled networks - do not scan | |
| wlp1s0b1: State: SCANNING -> INACTIVE | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: org.freedesktop.DBus.Properties.Set (/fi/w1/wpa_supplicant1/Interfaces/1) [ssv] | |
| properties_get_or_set: Set(ApScan) | |
| dbus: fi.w1.wpa_supplicant1.Interface.AddNetwork (/fi/w1/wpa_supplicant1/Interfaces/1) [a{sv}] | |
| dbus: Register network object '/fi/w1/wpa_supplicant1/Interfaces/1/Networks/0' | |
| wpa_dbus_dict_open_read: start reading a dict entry | |
| wpa_dbus_dict_get_entry: dict entry key: proactive_key_caching | |
| wpa_dbus_dict_get_entry: dict entry variant content type: i | |
| _wpa_dbus_dict_fill_value_from_variant: int32 value: 1 | |
| proactive_key_caching=1 (0x1) | |
| EAP: deinitialize previously used EAP method (25, PEAP) at invalidate | |
| ENGINE: engine deinit | |
| wpa_dbus_dict_get_entry: dict entry key: password | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=6): [REMOVED] | |
| password - hexdump_ascii(len=6): [REMOVED] | |
| wpa_dbus_dict_get_entry: dict entry key: phase1 | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| phase1 - hexdump_ascii(len=9): | |
| 70 65 61 70 76 65 72 3d 30 peapver=0 | |
| wpa_dbus_dict_get_entry: dict entry key: eap | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00 | |
| wpa_dbus_dict_get_entry: dict entry key: phase2 | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| phase2 - hexdump_ascii(len=13): | |
| 61 75 74 68 3d 4d 53 43 48 41 50 56 32 auth=MSCHAPV2 | |
| wpa_dbus_dict_get_entry: dict entry key: ca_path | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=14): [REMOVED] | |
| ca_path - hexdump_ascii(len=14): | |
| 2f 65 74 63 2f 73 73 6c 2f 63 65 72 74 73 /etc/ssl/certs | |
| wpa_dbus_dict_get_entry: dict entry key: ssid | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=7): [REMOVED] | |
| ssid - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wpa_dbus_dict_get_entry: dict entry key: key_mgmt | |
| wpa_dbus_dict_get_entry: dict entry variant content type: s | |
| _wpa_dbus_dict_fill_value_from_variant: string value: [omitted] | |
| key_mgmt: 0x1 | |
| wpa_dbus_dict_get_entry: dict entry key: identity | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=12): [REMOVED] | |
| identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| wpa_dbus_dict_get_entry: dict entry key: scan_ssid | |
| wpa_dbus_dict_get_entry: dict entry variant content type: i | |
| _wpa_dbus_dict_fill_value_from_variant: int32 value: 1 | |
| scan_ssid=1 (0x1) | |
| wpa_dbus_dict_get_entry: dict entry key: fragment_size | |
| wpa_dbus_dict_get_entry: dict entry variant content type: i | |
| _wpa_dbus_dict_fill_value_from_variant: int32 value: 1266 | |
| fragment_size=1266 (0x4f2) | |
| wpa_dbus_dict_get_entry: dict entry key: ca_path2 | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=14): [REMOVED] | |
| ca_path2 - hexdump_ascii(len=14): | |
| 2f 65 74 63 2f 73 73 6c 2f 63 65 72 74 73 /etc/ssl/certs | |
| wpa_dbus_dict_get_entry: dict entry key: bgscan | |
| wpa_dbus_dict_get_entry: dict entry variant content type: a | |
| _wpa_dbus_dict_entry_get_array: array_type y | |
| dbus: byte array contents - hexdump(len=17): [REMOVED] | |
| bgscan - hexdump_ascii(len=17): | |
| 73 69 6d 70 6c 65 3a 33 30 3a 2d 36 35 3a 33 30 simple:30:-65:30 | |
| 30 0 | |
| dbus: fi.w1.wpa_supplicant1.Interface.SelectNetwork (/fi/w1/wpa_supplicant1/Interfaces/1) [o] | |
| Fast associate: Old scan results | |
| wlp1s0b1: Setting scan request: 0.000000 sec | |
| wlp1s0b1: State: INACTIVE -> SCANNING | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| wlp1s0b1: Add radio work 'scan'@0x193f910 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x193f910 after 0.000016 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000054 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.664490 seconds | |
| nl80211: Received scan results (9 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 15 | |
| BSS: last_scan_res_used=9/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x193f910 done in 0.665309 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-70 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-70 | |
| wlp1s0b1: selected based on RSN IE | |
| wlp1s0b1: selected BSS 00:3a:99:04:bf:42 ssid='eduroam' | |
| wlp1s0b1: Considering connect request: reassociate: 1 selected: 00:3a:99:04:bf:42 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x19668f0 current_ssid=0x19668f0 | |
| wlp1s0b1: Request association with 00:3a:99:04:bf:42 | |
| wlp1s0b1: Re-association to the same ESS | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=9): 00 07 65 64 75 72 6f 61 6d | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=3): 03 01 01 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=8): 07 06 52 55 20 01 0d 14 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=7): 0b 05 16 00 0a 00 00 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=3): 2a 01 00 | |
| WPA: RSN IE in EAPOL-Key - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=32): 85 1e 07 00 8f 00 0f 00 ff 03 59 00 41 50 2d 6c 69 62 2d 32 00 00 00 00 00 00 00 00 16 00 00 27 | |
| WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=8): 96 06 00 40 96 00 0e 00 | |
| WPA: WMM Parameter Element - hexdump(len=24): 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: Add radio work 'sme-connect'@0x193f910 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'sme-connect'@0x193f910 after 0.000027 second wait | |
| wlp1s0b1: Automatic auth_alg selection: 0x1 | |
| RSN: PMKSA cache search - network_ctx=0x19668f0 try_opportunistic=1 | |
| RSN: Search for BSSID 00:3a:99:04:bf:42 | |
| RSN: Consider 00:3a:99:04:bf:42 for OKC | |
| RSN: No PMKSA cache entry found | |
| wlp1s0b1: RSN: using IEEE 802.11i/D9.0 | |
| wlp1s0b1: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2 | |
| wlp1s0b1: WPA: Selected mgmt group cipher 32 | |
| wlp1s0b1: WPA: clearing AP WPA IE | |
| WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| wlp1s0b1: WPA: using GTK TKIP | |
| wlp1s0b1: WPA: using PTK CCMP | |
| wlp1s0b1: WPA: using KEY_MGMT 802.1X | |
| wlp1s0b1: WPA: not using MGMT group cipher | |
| WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| RRM: Determining whether RRM can be used - device support: 0x0 | |
| RRM: No RRM in network | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: SME: Trying to authenticate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: SCANNING -> AUTHENTICATING | |
| EAPOL: External notification - EAP success=0 | |
| EAPOL: External notification - EAP fail=0 | |
| EAPOL: External notification - portControl=Auto | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| nl80211: Authenticate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=0): [NULL] | |
| * Auth Type 0 | |
| nl80211: Authentication request send successfully | |
| nl80211: Event message available | |
| nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp1s0b1 | |
| nl80211: New station 00:3a:99:04:bf:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=30): b0 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 b0 6b 00 00 02 00 00 00 | |
| nl80211: Authenticate event | |
| wlp1s0b1: Event AUTH (11) received | |
| wlp1s0b1: SME: Authentication response: peer=00:3a:99:04:bf:42 auth_type=0 auth_transaction=2 status_code=0 | |
| SME: Authentication response IEs - hexdump(len=0): [NULL] | |
| wlp1s0b1: set_disable_max_amsdu: -1 | |
| wlp1s0b1: set_ampdu_factor: -1 | |
| wlp1s0b1: set_ampdu_density: -1 | |
| wlp1s0b1: set_disable_ht40: 0 | |
| wlp1s0b1: set_disable_sgi: 0 | |
| wlp1s0b1: set_disable_ldpc: 0 | |
| wlp1s0b1: Trying to associate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: AUTHENTICATING -> ASSOCIATING | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| nl80211: Associate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 7f 08 00 00 00 00 00 00 00 40 | |
| * WPA Versions 0x2 | |
| * pairwise=0xfac04 | |
| * group=0xfac02 | |
| * akm=0xfac01 | |
| * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| nl80211: Association request send successfully | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/8 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/10 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/11 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/7 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/9 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp1s0b1 | |
| nl80211: MLME event 38 (NL80211_CMD_ASSOCIATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=72): 10 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 c0 6b 31 00 00 00 ac c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| nl80211: Associate event | |
| wlp1s0b1: Event ASSOC (0) received | |
| wlp1s0b1: Association info event | |
| resp_ies - hexdump(len=42): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| WPA: WMM Parameter Element - hexdump(len=24): 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: freq=2412 MHz | |
| wlp1s0b1: State: ASSOCIATING -> ASSOCIATED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| wlp1s0b1: Associated to a new BSS: BSSID=00:3a:99:04:bf:42 | |
| wlp1s0b1: Associated with 00:3a:99:04:bf:42 | |
| wlp1s0b1: WPA: Association event - clear replay counter | |
| wlp1s0b1: WPA: Clear old PTK | |
| TDLS: Remove peers on association | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| EAPOL: External notification - portEnabled=1 | |
| EAPOL: SUPP_PAE entering state CONNECTING | |
| EAPOL: enable timer tick | |
| EAPOL: SUPP_BE entering state IDLE | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| wlp1s0b1: Setting authentication timeout: 10 sec 0 usec | |
| wlp1s0b1: Cancelling scan request | |
| WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0 | |
| WMM AC: U-APSD queues=0x0 | |
| WMM AC: Valid WMM association, WMM AC is enabled | |
| nl80211: Event message available | |
| nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp1s0b1 | |
| nl80211: Ignore connect event (cmd=46) when using userspace SME | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Setting authentication timeout: 70 sec 0 usec | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_PAE entering state RESTART | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_PAE entering state AUTHENTICATING | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state IDENTITY | |
| wlp1s0b1: CTRL-EVENT-EAP-STARTED EAP authentication started | |
| EAP: Status notification: started (param=) | |
| EAP: EAP-Request Identity data - hexdump_ascii(len=41): | |
| 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f _networkid=eduro | |
| 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c am,nasid=WiFi-B, | |
| 70 6f 72 74 69 64 3d 32 39 portid=29 | |
| EAP: using real identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:99:04:bf:42 | |
| TX EAPOL - hexdump(len=21): 01 00 00 11 02 01 00 11 01 66 70 6d 2e 53 69 6e 79 61 6b 53 41 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=3 | |
| * type=0 | |
| * alpha2=RU | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=RU | |
| nl80211: Regulatory information - country=RU (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 40 MHz 20 mBm | |
| nl80211: 5250-5330 @ 40 MHz 20 mBm (DFS) | |
| nl80211: 5650-5730 @ 40 MHz 30 mBm (DFS) | |
| nl80211: 5735-5835 @ 40 MHz 30 mBm | |
| nl80211: 57000-66000 @ 2160 MHz 40 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=10 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=10): 02 00 00 06 01 02 00 06 19 20 | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=2 method=25 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state GET_METHOD | |
| wlp1s0b1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25 | |
| EAP: Status notification: accept proposed method (param=PEAP) | |
| EAP: Initialize selected EAP method: vendor 0 method 25 (PEAP) | |
| EAP-PEAP: Forced PEAP version 0 | |
| TLS: Phase2 EAP types - hexdump(len=8): 00 00 00 00 1a 00 00 00 | |
| TLS: using phase1 config options | |
| TLS: Trusted root certificate(s) loaded | |
| wlp1s0b1: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected | |
| EAP: EAP entering state METHOD | |
| SSL: Received packet(len=6) - Flags 0x20 | |
| EAP-PEAP: Start (server ver=0, own ver=0) | |
| EAP-PEAP: Using PEAP version 0 | |
| SSL: (where=0x10 ret=0x1) | |
| SSL: (where=0x1001 ret=0x1) | |
| SSL: SSL_connect:before/connect initialization | |
| OpenSSL: TX ver=0x303 content_type=256 | |
| OpenSSL: Message - hexdump(len=5): [REMOVED] | |
| OpenSSL: TX ver=0x303 content_type=22 | |
| OpenSSL: Message - hexdump(len=298): [REMOVED] | |
| SSL: (where=0x1001 ret=0x1) | |
| SSL: SSL_connect:SSLv2/v3 write client hello A | |
| SSL: (where=0x1002 ret=0xffffffff) | |
| SSL: SSL_connect:error in SSLv2/v3 read server hello A | |
| SSL: SSL_connect - want more data | |
| SSL: 303 bytes pending from ssl_out | |
| SSL: 303 bytes left to be sent out (of total 303 bytes) | |
| EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL eapRespData=0x1965e90 | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:99:04:bf:42 | |
| TX EAPOL - hexdump(len=317): 01 00 01 39 02 02 01 39 19 80 00 00 01 2f 16 03 01 01 2a 01 00 01 26 03 03 86 de 95 26 ec 1a 0e f8 9e 3b 5e 2b d6 7c 1e c9 37 85 29 3e a2 ed cd 31 5c 67 46 17 9d fe ae 9a 00 00 ac c0 30 c0 2c c0 28 c0 24 c0 14 c0 0a 00 a5 00 a3 00 a1 00 9f 00 6b 00 6a 00 69 00 68 00 39 00 38 00 37 00 36 00 88 00 87 00 86 00 85 c0 32 c0 2e c0 2a c0 26 c0 0f c0 05 00 9d 00 3d 00 35 00 84 c0 2f c0 2b c0 27 c0 23 c0 13 c0 09 00 a4 00 a2 00 a0 00 9e 00 67 00 40 00 3f 00 3e 00 33 00 32 00 31 00 30 00 9a 00 99 00 98 00 97 00 45 00 44 00 43 00 42 c0 31 c0 2d c0 29 c0 25 c0 0e c0 04 00 9c 00 3c 00 2f 00 96 00 41 00 07 c0 11 c0 07 c0 0c c0 02 00 05 00 04 c0 12 c0 08 00 16 00 13 00 10 00 0d c0 0d c0 03 00 0a 00 ff 01 00 00 51 00 0b 00 04 03 00 01 02 00 0a 00 1c 00 1a 00 17 00 19 00 1c 00 1b 00 18 00 1a 00 16 00 0e 00 0d 00 0b 00 0c 00 09 00 0a 00 0d 00 20 00 1e 06 01 06 02 06 03 05 01 05 02 05 03 04 01 04 02 04 03 03 01 03 02 03 03 02 01 02 02 02 03 00 0f 00 01 01 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=8 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=8): 02 00 00 04 04 02 00 04 | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Failure | |
| EAP: Status notification: completion (param=failure) | |
| EAP: EAP entering state FAILURE | |
| wlp1s0b1: CTRL-EVENT-EAP-FAILURE EAP authentication failed | |
| EAPOL: SUPP_PAE entering state HELD | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Set supplicant port unauthorized for 00:3a:99:04:bf:42 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| EAPOL: SUPP_BE entering state FAIL | |
| EAPOL: SUPP_BE entering state IDLE | |
| EAPOL authentication completed - result=FAILURE | |
| wlp1s0b1: Setting authentication timeout: 2 sec 0 usec | |
| EAPOL: startWhen --> 0 | |
| wlp1s0b1: Authentication with 00:3a:99:04:bf:42 timed out. | |
| Added BSSID 00:3a:99:04:bf:42 into blacklist | |
| TDLS: Remove peers on disassociation | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: Request to deauthenticate - bssid=00:3a:99:04:bf:42 pending_bssid=00:00:00:00:00:00 reason=3 state=ASSOCIATED | |
| TDLS: Tear down peers | |
| wpa_driver_nl80211_deauthenticate(addr=00:3a:99:04:bf:42 reason_code=3) | |
| wlp1s0b1: Event DEAUTH (12) received | |
| wlp1s0b1: Deauthentication notification | |
| wlp1s0b1: * reason 3 (locally generated) | |
| Deauthentication frame IE(s) - hexdump(len=0): [NULL] | |
| wlp1s0b1: CTRL-EVENT-DISCONNECTED bssid=00:3a:99:04:bf:42 reason=3 locally_generated=1 | |
| wlp1s0b1: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="eduroam" auth_failures=1 duration=10 reason=AUTH_FAILED | |
| wlp1s0b1: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=6) | |
| wlp1s0b1: Setting scan request: 0.100000 sec | |
| wlp1s0b1: Radio work 'sme-connect'@0x193f910 done in 2.046824 seconds | |
| BSSID 00:3a:99:04:bf:42 blacklist count incremented to 2 | |
| Continuous association failures - consider temporary network disabling | |
| wlp1s0b1: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="eduroam" auth_failures=2 duration=35 reason=CONN_FAILED | |
| wlp1s0b1: Blacklist count 8 --> request scan in 10000 ms | |
| wlp1s0b1: Ignore new scan request for 10.000000 sec since an earlier request is scheduled to trigger sooner | |
| TDLS: Remove peers on disassociation | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: Disconnect event - remove keys | |
| wlp1s0b1: State: ASSOCIATED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WMM AC: WMM AC is disabled | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: SUPP_PAE entering state DISCONNECTED | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Skip set_supp_port(unauthorized) while not associated | |
| EAPOL: SUPP_BE entering state INITIALIZE | |
| EAP: EAP entering state DISABLED | |
| EAPOL: External notification - portValid=0 | |
| wlp1s0b1: State: DISCONNECTED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| wlp1s0b1: Ignore new scan request for 1.000000 sec since an earlier request is scheduled to trigger sooner | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp1s0b1 | |
| nl80211: Delete station 00:3a:99:04:bf:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=00:3a:99:04:bf:42 A2=74:2f:68:d2:b1:f3 | |
| nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 00 3a 99 04 bf 42 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 00 03 00 | |
| nl80211: Deauthenticate event | |
| nl80211: Ignore deauth event triggered due to own deauth request | |
| nl80211: Event message available | |
| nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlp1s0b1 | |
| nl80211: Ignore disconnect event when using userspace SME | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=0 | |
| * type=1 | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD | |
| nl80211: Regulatory information - country=00 | |
| nl80211: 2402-2472 @ 40 MHz 20 mBm | |
| nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR) | |
| nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR) | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 57240-63720 @ 2160 MHz 0 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=1 | |
| * type=0 | |
| * alpha2=BY | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=BY | |
| nl80211: Regulatory information - country=BY (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) | |
| nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS) | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Add radio work 'scan'@0x1940370 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1940370 after 0.000020 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000067 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.659966 seconds | |
| nl80211: Received scan results (9 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 16 | |
| BSS: last_scan_res_used=9/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1940370 done in 0.660740 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-62 | |
| wlp1s0b1: skip - blacklisted (count=2 limit=0) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-68 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-78 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 3: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 4: 00:3a:98:f5:90:e2 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 5: 00:3a:9a:00:7c:13 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 6: 00:3a:99:d2:5a:42 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 7: 00:3a:9a:00:7c:32 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-83 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 8: 00:3a:99:d2:61:60 ssid='BSU-Conference' wpa_ie_len=0 rsn_ie_len=0 caps=0x431 level=-79 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: No APs found - clear blacklist and try again | |
| Removed BSSID 00:3a:99:04:bf:42 from blacklist (clear) | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-62 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-68 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-78 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 3: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 4: 00:3a:98:f5:90:e2 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 5: 00:3a:9a:00:7c:13 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 6: 00:3a:99:d2:5a:42 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 7: 00:3a:9a:00:7c:32 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-83 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: 8: 00:3a:99:d2:61:60 ssid='BSU-Conference' wpa_ie_len=0 rsn_ie_len=0 caps=0x431 level=-79 | |
| wlp1s0b1: skip - disabled temporarily for 34 second(s) | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Setting scan request: 5.000000 sec | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/10 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/8 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/11 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/7 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/9 | |
| EAPOL: disable timer tick | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| wlp1s0b1: Add radio work 'scan'@0x1940370 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1940370 after 0.000019 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000081 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.657177 seconds | |
| nl80211: Received scan results (8 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 17 | |
| BSS: last_scan_res_used=8/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1940370 done in 0.658069 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-68 | |
| wlp1s0b1: skip - disabled temporarily for 28 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-69 | |
| wlp1s0b1: skip - disabled temporarily for 28 second(s) | |
| wlp1s0b1: 2: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-78 | |
| wlp1s0b1: skip - disabled temporarily for 28 second(s) | |
| wlp1s0b1: 3: 00:3a:98:f5:90:e2 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 28 second(s) | |
| wlp1s0b1: 4: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 28 second(s) | |
| wlp1s0b1: 5: 00:3a:9a:00:7c:13 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 28 second(s) | |
| wlp1s0b1: 6: 00:3a:99:d2:5a:42 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 28 second(s) | |
| wlp1s0b1: 7: 00:3a:99:d2:61:60 ssid='BSU-Conference' wpa_ie_len=0 rsn_ie_len=0 caps=0x431 level=-79 | |
| wlp1s0b1: skip - disabled temporarily for 28 second(s) | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Setting scan request: 5.000000 sec | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/10 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/8 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/11 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/9 | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| wlp1s0b1: Add radio work 'scan'@0x1940370 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1940370 after 0.000022 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000061 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.660217 seconds | |
| nl80211: Received scan results (8 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 18 | |
| wlp1s0b1: BSS: Remove id 7 BSSID 00:3a:9a:00:7c:32 SSID 'eduroam' due to no match in scan | |
| dbus: Unregister BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/7' | |
| BSS: last_scan_res_used=8/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1940370 done in 0.661224 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-66 | |
| wlp1s0b1: skip - disabled temporarily for 22 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-66 | |
| wlp1s0b1: skip - disabled temporarily for 22 second(s) | |
| wlp1s0b1: 2: 00:3a:98:f5:90:e2 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 22 second(s) | |
| wlp1s0b1: 3: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-81 | |
| wlp1s0b1: skip - disabled temporarily for 22 second(s) | |
| wlp1s0b1: 4: 00:3a:9a:00:7c:13 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 22 second(s) | |
| wlp1s0b1: 5: 00:3a:99:d2:5a:42 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 22 second(s) | |
| wlp1s0b1: 6: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-83 | |
| wlp1s0b1: skip - disabled temporarily for 22 second(s) | |
| wlp1s0b1: 7: 00:3a:99:d2:61:60 ssid='BSU-Conference' wpa_ie_len=0 rsn_ie_len=0 caps=0x431 level=-79 | |
| wlp1s0b1: skip - disabled temporarily for 22 second(s) | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Setting scan request: 5.000000 sec | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/10 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/8 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/11 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/9 | |
| Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| wlp1s0b1: Add radio work 'scan'@0x1940370 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1940370 after 0.000023 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000099 seconds | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID 'eduroam' | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.663708 seconds | |
| nl80211: Received scan results (8 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 19 | |
| BSS: last_scan_res_used=8/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1940370 done in 0.664645 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-65 | |
| wlp1s0b1: skip - disabled temporarily for 17 second(s) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-65 | |
| wlp1s0b1: skip - disabled temporarily for 17 second(s) | |
| wlp1s0b1: 2: 00:3a:98:f5:90:e2 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-79 | |
| wlp1s0b1: skip - disabled temporarily for 17 second(s) | |
| wlp1s0b1: 3: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-80 | |
| wlp1s0b1: skip - disabled temporarily for 17 second(s) | |
| wlp1s0b1: 4: 00:3a:99:d2:61:62 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 17 second(s) | |
| wlp1s0b1: 5: 00:3a:9a:00:7c:13 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-82 | |
| wlp1s0b1: skip - disabled temporarily for 17 second(s) | |
| wlp1s0b1: 6: 00:3a:99:d2:5a:42 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x431 level=-84 | |
| wlp1s0b1: skip - disabled temporarily for 17 second(s) | |
| wlp1s0b1: 7: 00:3a:99:d2:61:60 ssid='BSU-Conference' wpa_ie_len=0 rsn_ie_len=0 caps=0x431 level=-79 | |
| wlp1s0b1: skip - disabled temporarily for 17 second(s) | |
| wlp1s0b1: No suitable network found | |
| wlp1s0b1: Setting scan request: 5.000000 sec | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/10 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/8 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/11 | |
| dbus: flush_object_timeout_handler: Timeout - sending changed properties of object /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/9 | |
| wlp1s0b1: Removing interface wlp1s0b1 | |
| wlp1s0b1: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 state=SCANNING | |
| TDLS: Tear down peers | |
| wlp1s0b1: State: SCANNING -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| dbus: Unregister network object '/fi/w1/wpa_supplicant1/Interfaces/1/Networks/0' | |
| EAP: deinitialize previously used EAP method (25, PEAP) at EAP deinit | |
| ENGINE: engine deinit | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: BSS: Remove id 1 BSSID 00:3a:99:04:bf:43 SSID 'test' due to wpa_bss_flush | |
| dbus: Unregister BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/1' | |
| wlp1s0b1: BSS: Remove id 0 BSSID 00:3a:99:04:bf:42 SSID 'eduroam' due to wpa_bss_flush | |
| dbus: Unregister BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/0' | |
| wlp1s0b1: BSS: Remove id 10 BSSID 00:3a:98:f5:90:e2 SSID 'eduroam' due to wpa_bss_flush | |
| dbus: Unregister BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/10' | |
| wlp1s0b1: BSS: Remove id 2 BSSID 00:3a:9a:00:7c:12 SSID 'eduroam' due to wpa_bss_flush | |
| dbus: Unregister BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/2' | |
| wlp1s0b1: BSS: Remove id 5 BSSID 00:3a:99:d2:61:62 SSID 'eduroam' due to wpa_bss_flush | |
| dbus: Unregister BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/5' | |
| wlp1s0b1: BSS: Remove id 8 BSSID 00:3a:9a:00:7c:13 SSID 'test' due to wpa_bss_flush | |
| dbus: Unregister BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/8' | |
| wlp1s0b1: BSS: Remove id 11 BSSID 00:3a:99:d2:5a:42 SSID 'eduroam' due to wpa_bss_flush | |
| dbus: Unregister BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/11' | |
| wlp1s0b1: BSS: Remove id 9 BSSID 00:3a:99:d2:61:60 SSID 'BSU-Conference' due to wpa_bss_flush | |
| dbus: Unregister BSS object '/fi/w1/wpa_supplicant1/Interfaces/1/BSSs/9' | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: Cancelling authentication timeout | |
| Remove interface wlp1s0b1 from radio phy0 | |
| Remove radio phy0 | |
| nl80211: deinit ifname=wlp1s0b1 disabled_11b_rates=0 | |
| nl80211: Remove monitor interface: refcount=0 | |
| netlink: Operstate: ifindex=2 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) | |
| nl80211: Set mode ifindex 2 iftype 2 (STATION) | |
| nl80211: Unsubscribe mgmt frames handle 0x88888888891b55f9 (mode change) | |
| dbus: Unregister interface object '/fi/w1/wpa_supplicant1/Interfaces/1' | |
| wlp1s0b1: CTRL-EVENT-TERMINATING | |
| dbus: Unregister D-Bus object '/fi/w1/wpa_supplicant1' |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment