bisectable6

query

my $a = (^2).Seq; my $b = $a; say $a eqv $b;

result

Bisecting: 5639 revisions left to test after this (roughly 13 steps)
[7363f898f67ee7d8117ff958b3d2286d03e07feb] Move up Rakudo::Internals::CompilerServices
»»»»» Testing 7363f898f67ee7d8117ff958b3d2286d03e07feb
»»»»» Script output:
This Seq has already been iterated, and its values consumed
(you might solve this by adding .cache on usages of the Seq, or
by assigning the Seq into an array)
  in block <unit> at /tmp/3nsnOVkIkZ line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing c2b66c144c368f4d98a542d4de3c553e85febbe5
»»»»» Cannot test this commit. Reason: Commit exists, but an executable could not be built for it
»»»»» Therefore, skipping this revision
»»»»» -------------------------------------------------------------------------
»»»»» Testing 78f09fc35bc4b332e06c94d91ad7df9aa8e906d4
»»»»» Script output:
The iterator of this Seq is already in use/consumed by another Seq
(you might solve this by adding .cache on usages of the Seq, or
by assigning the Seq into an array)
  in block <unit> at /tmp/3nsnOVkIkZ line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing bfff01a55aa4fd587a256d9e5f090c0faed45107
»»»»» Script output:
The iterator of this Seq is already in use/consumed by another Seq
(you might solve this by adding .cache on usages of the Seq, or
by assigning the Seq into an array)
  in block <unit> at /tmp/3nsnOVkIkZ line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing a7302f0a42f50ed786f5970300179ef46e57c56e
»»»»» Script output:
The iterator of this Seq is already in use/consumed by another Seq
(you might solve this by adding .cache on usages of the Seq, or
by assigning the Seq into an array)
  in block <unit> at /tmp/3nsnOVkIkZ line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 1e166e416977ce77b13cc74dc6ff50aa9c88d34e
»»»»» Script output:
The iterator of this Seq is already in use/consumed by another Seq
(you might solve this by adding .cache on usages of the Seq, or
by assigning the Seq into an array)
  in block <unit> at /tmp/3nsnOVkIkZ line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing bd4b2c14873da334f102c00fa5bc01ee4e92d517
»»»»» Script output:
The iterator of this Seq is already in use/consumed by another Seq
(you might solve this by adding .cache on usages of the Seq, or
by assigning the Seq into an array)
  in block <unit> at /tmp/3nsnOVkIkZ line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 94b30b667b92274eeb77d6a9f88598549892d8f2
»»»»» Script output:
True

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 05b5f81b67fa4bcee17d417fdd0f9e72652d25c3
»»»»» Script output:
True

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 5d65764a21484f96c78dbb240c5e73b8ccca902b
»»»»» Script output:
True

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 666f95c1ab73dce29caa68afafb3e395e4b9d4c7
»»»»» Script output:
The iterator of this Seq is already in use/consumed by another Seq
(you might solve this by adding .cache on usages of the Seq, or
by assigning the Seq into an array)
  in block <unit> at /tmp/3nsnOVkIkZ line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 87bc11710ec98e6f873986bb6e60929eb4eee548
»»»»» Script output:
The iterator of this Seq is already in use/consumed by another Seq
(you might solve this by adding .cache on usages of the Seq, or
by assigning the Seq into an array)
  in block <unit> at /tmp/3nsnOVkIkZ line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 05916efa5277966d32cd3de53ed2045112dd5499
»»»»» Script output:
The iterator of this Seq is already in use/consumed by another Seq
(you might solve this by adding .cache on usages of the Seq, or
by assigning the Seq into an array)
  in block <unit> at /tmp/3nsnOVkIkZ line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 1299e324c651d0bea17b175fd28406cf1aea58ce
»»»»» Script output:
The iterator of this Seq is already in use/consumed by another Seq
(you might solve this by adding .cache on usages of the Seq, or
by assigning the Seq into an array)
  in block <unit> at /tmp/3nsnOVkIkZ line 1


»»»»» Script exit code: 1
»»»»» Bisecting by exit code
»»»»» Current exit code is 1, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “old”
»»»»» -------------------------------------------------------------------------
»»»»» Testing 76187b57c5ea8a34d16510878539bbb05ce4c9fb
»»»»» Script output:
True

»»»»» Script exit code: 0
»»»»» Bisecting by exit code
»»»»» Current exit code is 0, exit code on “old” revision is 1
»»»»» Note that on “old” revision exit code is normally 0, you are probably trying to find when something was fixed
»»»»» If exit code is not the same as on “old” revision, this revision will be marked as “new”
»»»»» Therefore, marking this revision as “new”
76187b57c5ea8a34d16510878539bbb05ce4c9fb is the first new commit
commit 76187b57c5ea8a34d16510878539bbb05ce4c9fb
Author: Peter du Marchie van Voorthuysen <p.dumarchie@gmail.com>
Date:   Mon Jan 27 10:02:31 2020 +0100

    Decontainerize arguments in eqv between Seqs
    
    Different containers holding the same Seq have equal value.

:040000 040000 6973959ca55fd81990419d652b5f6a31ed8b3d27 d06edd18ba2992d787d30b0f0a5dc18c169808c3 M	src