Skip to content

Instantly share code, notes, and snippets.

Created July 8, 2017 08:29
Show Gist options
  • Save anonymous/fdd0864c2f52d44db3bcde17cfde5b63 to your computer and use it in GitHub Desktop.
Save anonymous/fdd0864c2f52d44db3bcde17cfde5b63 to your computer and use it in GitHub Desktop.
Static route statement




File: Download Static route statement



what is static route
static routing pdf
default static route
static route command cisco packet tracer
dynamic routing
default routing
static route command windows
static routing vs dynamic routing


 

 

20 Dec 2016 You'll need to dive into the Command Prompt to add a static route to the Windows routing table, but it's easy and we'll walk you through the Understanding Basic Static Routing, Example: Configuring a Basic Set of Static Routes for Connecting to Stub Networks, Example: Configuring IPv6 Static 3 Jun 2005 This chapter provides information and commands concerning the following topics: Configuring a static route on a router. Configuring a default 14 Jul 2008 To configure a static route, issue the ip route prefix mask {ip-address [name] [permanent] [tag tag] command in global configuration mode. You must specify only the output interface (the interface on which all packets are sent to the destination network) in a directly connected static route. The router assumes the destination is directly attached to the output interface and the packet destination is used as the next-hop address. Static routing is a form of routing that occurs when a router uses a manually-configured routing In most Linux distributions, a static route can be added using the iproute2 command. The following is typed at a terminal:- root@router:~# ip route The command configures a static IP route for destination network 192.128.2.69/24. Since an Ethernet port is specified instead of a gateway IP address as the Configure static routes to be installed in the routing table. You can specify any number of routes within a single static statement, and you can specify any number You need to specify only the output interface (the interface on which all packets are sent to the destination network) in a directly connected static route. The router assumes the destination is directly attached to the output interface and the packet destination is used as the next hop address.


D.u. migration report, 51 dl examination form medical report, Track cx990 manual, Reservation form in flash, Deoxys form in pokemon pearl.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment