SaltwaterC

Install

As usual, use it at your own risk. I am not to be held responsible for your actions.

Supported devices: WNR1000v2 (tested by me), WNR1000v2-VC (provided by Comcast for free; tested by Douglas Fraser)

Notice: Upgrade WNR1000v2 to the latest factory firmware: 1.1.2.58. Otherwise, the power LED may not behave properly.

You need to place the device into failsafe mode. For booting into failsafe mode, you need to power up the device while holding the reset button with a pin. The power LED should have an amber colour. Hold the button until it is starting to flash green. It starts to flash green after it flashes the amber LED for six times. After that, the device is in failsafe mode, accepting a firmware via its TFTP server. The device should respond to pings at 192.168.1.1, although the responses may be malformed.

noelboss

Simple automated GIT Deployment using GIT Hooks

Here are the simple steps needed to create a deployment from your local GIT repository to a server based on this in-depth tutorial.

How it works

You are developing in a working-copy on your local machine, lets say on the master branch. Most of the time, people would push code to a remote server like github.com or gitlab.com and pull or export it to a production server. Or you use a service like deepl.io to act upon a Web-Hook that's triggered that service.