git clone git@github.com:YOUR-USERNAME/YOUR-FORKED-REPO.git
cd into/cloned/fork-repo
git remote add upstream git://github.com/ORIGINAL-DEV-USERNAME/REPO-YOU-FORKED-FROM.git
git fetch upstream
#!/bin/bash | |
if [ ! -r "/usr/local/git" ]; then | |
echo "Git doesn't appear to be installed via this installer. Aborting" | |
exit 1 | |
fi | |
echo "This will uninstall git by removing /usr/local/git/**/*, /etc/paths.d/git, /etc/manpaths.d/git" | |
printf "Type 'yes' if you sure you wish to continue: " | |
read response | |
if [ "$response" == "yes" ]; then | |
sudo rm -rf /usr/local/git/ |
; for PLA calibration | |
M140 S60 ; head up bed first for thermal expansion | |
M104 S190 T0 ; start heating T0 to 190 degrees Celsius | |
; inspect probe placement & ensure safe Z home return is enabled | |
; | |
M851 Z0 ; reset z-offset to zero | |
G28 ; safe-z home all x,y,z while the extruder is still heating | |
M109 S190 T0 ; wait for T0 to reach 190 degrees before continuing with any other commands | |
; | |
G1 X110 Y110 ; move center of bed with offset zero |
#!/bin/bash | |
##set -e | |
echo "macos_init.sh => fresh install..." | |
echo "installing xcode..." | |
##xcode-select --install || exit 1 | |
xcode-select --install | |
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" |
To remove a submodule you need to:
from __future__ import print_function | |
import pixy | |
from ctypes import * | |
from pixy import * | |
import picar | |
import time | |
from picar import front_wheels | |
from picar import back_wheels |
# packages in environment at /opt/anaconda3/envs/px4-env: | |
# | |
# Name Version Build Channel | |
ca-certificates 2023.01.10 hecd8cb5_0 | |
certifi 2022.12.7 py38hecd8cb5_0 | |
future 0.18.3 pypi_0 pypi | |
kconfiglib 14.1.0 pypi_0 pypi | |
libcxx 14.0.6 h9765a3e_0 | |
libffi 3.4.2 hecd8cb5_6 | |
lxml 4.9.2 pypi_0 pypi |
#include <stdint.h> | |
extern const uint8_t bsec_config_selectivity[2285]; | |
// | |
#include "bsec_serialized_configurations_selectivity.h" | |
const uint8_t bsec_config_selectivity[2285] = | |
{0,0,2,2,189,1,0,0,0,0,0,0,213,8,0,0,52,0,1,0,0,168,19,73,64,49,119,76,0,192,40,72,0,192,40,72,137,65,0,191,205,204,204,190,0,0,64,191,225,122,148,190,10,0,3,0,216,85,0,100,0,0,96,64,23,183,209,56,28,0,2,0,0,244,1,150,0,50,0,0,128,64,0,0,32,65,144,1,0,0,112,65,0,0,0,63,16,0,3,0,10,215,163,60,10,215,35,59,10,215,35,59,13,0,5,0,0,0,0,0,100,254,131,137,87,88,0,9,0,7,240,150,61,0,0,0,0,0,0,0,0,28,124,225,61,52,128,215,63,0,0,160,64,0,0,0,0,0,0,0,0,205,204,12,62,103,213,39,62,230,63,76,192,0,0,0,0,0,0,0,0,145,237,60,191,251,58,64,63,177,80,131,64,0,0,0,0,0,0,0,0,93,254,227,62,54,60,133,191,0,0,64,64,12,0,10,0,0,0,0,0,0,0,0,0,173,6,11,0,0,0,2,173,187,130,62,122,98,216,62,199,66,142,190,35,54,103,62,223,0,181,62,241,103,188,189,95,181,200,189,232,200,199,62,133,247,133,63,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, |