denji

Moved to git repository: https://github.com/denji/nginx-tuning

NGINX Tuning For Best Performance

For this configuration you can use web server you like, i decided, because i work mostly with it to use nginx.

Generally, properly configured nginx can handle up to 400K to 500K requests per second (clustered), most what i saw is 50K to 80K (non-clustered) requests per second and 30% CPU load, course, this was 2 x Intel Xeon with HyperThreading enabled, but it can work without problem on slower machines.

You must understand that this config is used in testing environment and not in production so you will need to find a way to implement most of those features best possible for your servers.

staltz

The introduction to Reactive Programming you've been missing

(by @andrestaltz)

---

This tutorial as a series of videos

If you prefer to watch video tutorials with live-coding, then check out this series I recorded with the same contents as in this article: Egghead.io - Introduction to Reactive Programming.

---

konklone

# Basically the nginx configuration I use at konklone.com. 
# I check it using https://www.ssllabs.com/ssltest/analyze.html?d=konklone.com
# 
# To provide feedback, please tweet at @konklone or email eric@konklone.com.
# Comments on gists don't notify the author. 
# 
# Thanks to WubTheCaptain (https://wubthecaptain.eu) for his help and ciphersuites.
# Thanks to Ilya Grigorik (https://www.igvita.com) for constant inspiration.

server {

denji

Moved to git repository: https://github.com/denji/golang-tls

Generate private key (.key)

# Key considerations for algorithm "RSA" ≥ 2048-bit
openssl genrsa -out server.key 2048

# Key considerations for algorithm "ECDSA" ≥ secp384r1
# List ECDSA the supported curves (openssl ecparam -list_curves)

andreyvit

tmux cheat sheet

(C-x means ctrl+x, M-x means alt+x)

Prefix key

The default prefix is C-b. If you (or your muscle memory) prefer C-a, you need to add this to ~/.tmux.conf:

remap prefix to Control + a

JalfResi

package main

import(
        "log"
        "net/url"
        "net/http"
        "net/http/httputil"
)

func main() {

ageitgey

Install dlib and face_recognition on a Raspberry Pi

Instructions tested with a Raspberry Pi 2 with an 8GB memory card. Probably also works fine on a Raspberry Pi 3.

Steps

Download the latest Raspbian Jessie Light image. Earlier versions of Raspbian won't work.

Write it to a memory card using Etcher, put the memory card in the RPi and boot it up.

application2000

These commands are based on a askubuntu answer http://askubuntu.com/a/581497
To install gcc-6 (gcc-6.1.1), I had to do more stuff as shown below.
USE THOSE COMMANDS AT YOUR OWN RISK. I SHALL NOT BE RESPONSIBLE FOR ANYTHING.
ABSOLUTELY NO WARRANTY.

If you are still reading let's carry on with the code.

sudo apt-get update && \
sudo apt-get install build-essential software-properties-common -y && \
sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y && \

ageitgey

How to install dlib v19.9 or newer (w/ python bindings) from github on macOS and Ubuntu

Pre-reqs:

• Have Python 3 installed. On macOS, this could be installed from homebrew or even via standard Python 3.6 downloaded installer from https://www.python.org/download. On Linux, just use your package manager.
• On macOS:
  • Install XCode from the Mac App Store (or install the XCode command line utils).
  • Have homebrew installed
• On Linux:

lalkmim

Lesson 1 - Iterations
- BinaryGap - https://codility.com/demo/results/trainingU2FQPQ-7Y4/

Lesson 2 - Arrays
- OddOccurrencesInArray - https://codility.com/demo/results/trainingFN5RVT-XQ4/
- CyclicRotation - https://codility.com/demo/results/trainingSH2W5R-RP5/

Lesson 3 - Time Complexity
- FrogJmp - https://codility.com/demo/results/training6KKWUD-BXJ/
- PermMissingElem - https://codility.com/demo/results/training58W4YJ-VHA/