Skip to content

Instantly share code, notes, and snippets.

View hall757's full-sized avatar
🌎
Consuming oxygen... unless this is a simulation!

Randy Hall hall757

🌎
Consuming oxygen... unless this is a simulation!
View GitHub Profile
@hall757
hall757 / mounter.sh
Created February 28, 2024 13:31
Ensures sdcard in macbook used for time capsule backups is always mounted.
#!/bin/bash
#
# Ensures sd card in macbook used for timecapsule backups is always mounted.
# Gets encryption password from keychain.
#
# Put this file in /usr/local/bin/mounter.sh
#
# Edit the volume name and disk id of sd card
#
# Add to crontab by running 'crontab -e' and adding following line
@hall757
hall757 / aspera_functions.sh
Created December 8, 2023 14:29
useful bash function for aspera deployments
alias ssh='ssh -o ServerAliveInterval=5 -o ServerAliveCountMax=1'
export RPROXYKEY=/opt/aspera/proxy/var/aspera_rproxy_id_rsa.pub
export HSTSKEY=/opt/aspera/var/aspera_tokenauth_id_rsa.pub
export ASPERAPUBLICKEY1="command=\"/bin/aspshell -t\",no-agent-forwarding,no-port-forwarding,no-X11-forwarding,no-pty ssh-dss 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 Aspera public access"
export ASPERAPUBLICKEY2="command=\"/bin/aspshell -t\",no-agent-forwarding,no-port-forwarding,no-X11-forwar
@hall757
hall757 / export.sh
Created September 26, 2023 18:50
export orchestrator database for import into existing upgraded schema
#!/bin/bash
function parse_yaml {
local prefix=$2
local s='[[:space:]]*' w='[a-zA-Z0-9_]*' fs=$(echo @|tr @ '\034')
sed -ne "s|^\($s\):|\1|" \
-e "s|^\($s\)\($w\)$s:$s[\"']\(.*\)[\"']$s\$|\1$fs\2$fs\3|p" \
-e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $1 |
awk -F$fs '{
indent = length($1)/2;
@hall757
hall757 / make_exclusion_regexp.md
Created September 15, 2023 16:53
Combine one or more inclusion regex with one or more exclusion regex to form a single exclusion regex.

Make Exclusion Regular Expression

Combine one or more inclusion regex with one or more exclusion regex to form a single exclusion regex. This is based on a negative forward lookup to turn an inclusion into an exclusion.

  • ^((?!( regexp_to_invert )).)*$
 # takes single regexp as string or multiple as array, or nil
@hall757
hall757 / README.md
Created September 13, 2023 20:22 — forked from danielepolencic/README.md
Create 3 nodes Kubernetes cluster locally with Vagrant

3 Virtual Machines Kubernetes cluster

Dependencies

You should install VirtualBox and Vagrant before you start.

Creating the cluster

You should create a Vagrantfile in an empty directory with the following content:

@hall757
hall757 / AP230 Client.md
Created September 13, 2023 19:27 — forked from atomspring/AP230 Client.md
Aerohive AP230 wireless client bridge

AP230 Wireless Client Bridge Setup

This is a quick guide to setting up your AP230 as a wireless client bridge, allowing any devices plugged in via eth0 to communicate with the network of the connected SSID. Note that this config uses NAT, and I cannot figure out how to set a static IP for the "WAN" interface, so DHCP it is.

Setup steps

  1. Connect a console cable to to the "console" port (or do step two, SSH into the address which appears on your network)
  2. After providing power to the AP (either with PoE or 12v/1a connector), hold the reset button for 30s (or login and execute reset config bootstrap, reset config)
  3. Default login: admin:aerohive
  4. Basic Administravia:
@hall757
hall757 / aerohive.md
Created September 13, 2023 19:27 — forked from samdoran/aerohive.md
Configuring Aerohive access points using the CLI

Aerohive

Initial setup

  1. Reset to factory defaults

     reset config bootstrap
     reset config
    
  2. Configure interfaces

@hall757
hall757 / aws-sigv4-ssm-get-parameter.sh
Created September 13, 2023 19:26 — forked from slawekzachcial/aws-sigv4-ssm-get-parameter.sh
Using CURL to call AWS ReST API, signing request with v4 signature
#!/bin/bash
# Source: https://docs.aws.amazon.com/general/latest/gr/sigv4-signed-request-examples.html
[[ -n "${AWS_ACCESS_KEY_ID}" ]] || { echo "AWS_ACCESS_KEY_ID required" >&2; exit 1; }
[[ -n "${AWS_SECRET_ACCESS_KEY}" ]] || { echo "AWS_SECRET_ACCESS_KEY required" >&2; exit 1; }
readonly parameterName="SlawekTestParam"
readonly method="POST"
@hall757
hall757 / VPNConfigurationProfiles.mobileconfig
Created September 13, 2023 19:26 — forked from thomaswitt/VPNConfigurationProfiles.mobileconfig
An OnDemand VPN iOS profile for iPad and iPhone that automatically connects you to different VPNs (e.g. Meraki, FRITZ!Box and Streisand) | Blog-Entry: https://thomas-witt.com/auto-connect-your-ios-device-to-a-vpn-when-joining-an-unknown-wifi-d1df8100c4ba
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>PayloadContent</key>
<array>
<!-- Home: Manual -->
<dict>
<key>UserDefinedName</key>
@hall757
hall757 / delete_old_mail.py
Created September 13, 2023 19:26 — forked from Rathgore/delete_old_mail.py
Simple script to delete old messages in an IMAP mailbox
MAIL_SERVER = ''
USERNAME = ''
PASSWORD = ''
MAILBOX = 'Spam'
MAX_DAYS = 7 # Deletes messages older than a week
import imaplib
import datetime
today = datetime.date.today()