One Paragraph of project description goes here
These instructions will get you a copy of the project up and running on your local machine for development and testing purposes. See deployment for notes on how to deploy the project on a live system.
;End GCode | |
M104 S0 ;extruder heater off | |
M140 S0 ;heated bed heater off (if you have it) | |
G91 ;relative positioning | |
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure | |
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more | |
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way | |
M84 ;steppers off |
/** | |
* Marlin 3D Printer Firmware | |
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] | |
* | |
* Based on Sprinter and grbl. | |
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm | |
* | |
* This program is free software: you can redistribute it and/or modify | |
* it under the terms of the GNU General Public License as published by | |
* the Free Software Foundation, either version 3 of the License, or |