| /* A simple ADC example that checks the analog reading on ADC0 and turns | |
| * an LED on if the reading is higher than a threshold value and turns if | |
| * off if it is under that value. */ | |
| #include <avr/io.h> | |
| #include <stdint.h> | |
| /* Which analog pin we want to read from. The pins are labeled "ADC0" | |
| * "ADC1" etc on the pinout in the data sheet. In this case ADC_PIN | |
| * being 0 means we want to use ADC0. On the ATmega328P this is also | |
| * the same as pin PC0 */ |
| /* A simple ADC example that checks the analog reading on ADC0 and turns | |
| * an LED on if the reading is higher than a threshold value and turns if | |
| * off if it is under that value. */ | |
| #include <avr/io.h> | |
| #include <stdint.h> | |
| /* Which analog pin we want to read from. The pins are labeled "ADC0" | |
| * "ADC1" etc on the pinout in the data sheet. In this case ADC_PIN | |
| * being 0 means we want to use ADC0. On the ATmega328P this is also | |
| * the same as pin PC0 */ |
Here are the simple steps needed to create a deployment from your local GIT repository to a server based on this in-depth tutorial.
You are developing in a working-copy on your local machine, lets say on the master branch. Most of the time, people would push code to a remote server like github.com or gitlab.com and pull or export it to a production server. Or you use a service like deepl.io to act upon a Web-Hook that's triggered that service.
