Kuang-Cheng Chien kcchien

## DeployCloudFunctions.sh
# 部置GCStoPubsub function
gcloud beta functions deploy GCStoPubsub --stage-bucket gs://${STAGING_BUCKET_NAME} --trigger-topic ${UPLOAD_NOTIFICATION_TOPIC} --entry-point GCStoPubsub --runtime=nodejs6

# 部置visionAPI function
gcloud beta functions deploy visionAPI --stage-bucket gs://${STAGING_BUCKET_NAME} --trigger-topic visionapiservice --entry-point visionAPI --runtime=nodejs6

# 部置videoIntelligenceAPI function
gcloud beta functions deploy videoIntelligenceAPI --stage-bucket gs://${STAGING_BUCKET_NAME} --trigger-topic videointelligenceservice --entry-point videoIntelligenceAPI --timeout 540  --runtime=nodejs6

# 部置insertIntoBigQuery function

## EditJSONConfig.sh
sed -i "s/\[PROJECT-ID\]/$PROJECT_ID/g" config.json

sed -i "s/\[FLAGGED_BUCKET_NAME\]/$FLAGGED_BUCKET_NAME/g" config.json

sed -i "s/\[FILTERED_BUCKET_NAME\]/$FILTERED_BUCKET_NAME/g" config.json

sed -i "s/\[DATASET_ID\]/$DATASET_ID/g" config.json

sed -i "s/\[TABLE_NAME\]/$TABLE_NAME/g" config.json

## CreatePubSubTopics.sh
# 建立4個不同用途的Topics
gcloud pubsub topics create ${UPLOAD_NOTIFICATION_TOPIC}
gcloud pubsub topics create visionapiservice
gcloud pubsub topics create videointelligenceservice
gcloud pubsub topics create bqinsert

# 檢查Topics是否正確被建立
gcloud pubsub topics list

## CreateCloudStorageBuckets.sh
gsutil mb gs://${IV_BUCKET_NAME}
gsutil mb gs://${FILTERED_BUCKET_NAME}
gsutil mb gs://${FLAGGED_BUCKET_NAME}
gsutil mb gs://${STAGING_BUCKET_NAME}

# 檢查一下是否有列出4個Bucket
gsutil ls

## Initializing.sh
# 取得專案ID
export PROJECT_ID=$(gcloud info --format='value(config.project)')

# Cloud Storage buckets的名稱
export IV_BUCKET_NAME=${PROJECT_ID}-upload
export FILTERED_BUCKET_NAME=${PROJECT_ID}-filtered
export FLAGGED_BUCKET_NAME=${PROJECT_ID}-flagged
export STAGING_BUCKET_NAME=${PROJECT_ID}-staging

# Cloud Pub/Sub topic環境變數

## buildVSCode.sh
# 退出桌面模式，以節省記憶體，不然編譯到一半會有記憶體不足的狀況，造成失敗
# 你的畫面會進入Console 模式，是正常的
sudo systemctl isolate multi-user

# 準備建置原始碼
yarn

# 建置原始碼，這個會要花一些時間，約15~20分鐘
yarn run gulp vscode-linux-arm64-min
yarn run gulp vscode-linux-arm64-build-deb

## zpl-tcp.js
const net = require('net'); // 引入網路 (Net) 模組
const HOST = '10.10.10.168';
const PORT = 9100;

let zpl = `
^XA
^FO150,40^BY3
^BCN,110,Y,N,N
^FD123456^FS
^XZ

## miniconda_on_rpi.md

      
              1 file
            
          
              0 forks
            
          
              0 comments
            
          
              0 stars
            
          
                kcchien
                / miniconda_on_rpi.md
            
            
              Last active
              October 29, 2018 06:49
                — forked from simoncos/miniconda_on_rpi.md
            
              
                Install Miniconda 3 on Raspberry Pi 在樹莓派上安裝 Miniconda
              
          
    refer to: https://stackoverflow.com/questions/39371772/how-to-install-anaconda-on-raspberry-pi-3-model-b
{USER}: pi
Install Miniconda 3:
wget http://repo.continuum.io/miniconda/Miniconda3-latest-Linux-armv7l.sh
sudo md5sum Miniconda3-latest-Linux-armv7l.sh # (optional) check md5
sudo /bin/bash Miniconda3-latest-Linux-armv7l.sh # -&gt; change default directory to /home/pi/miniconda3


## install_fcitx_ime.sh
# Reference
# https://ithelp.ithome.com.tw/articles/10192648
# https://sites.google.com/site/paothsungchen/selflearning/elementaryos/inputchinese

# Fcitx official https://fcitx-im.org/wiki/Fcitx

sudo apt install software-properties-common

＃ 移除 ibus 框架
sudo apt remove --purge $(sudo dpkg -l | grep ibus | awk '{print $2}' | grep ^ibus)

## install_driver.sh
# Reference http://www.linuxlinx.com/2016/08/fix-no-wireless-on-macbook-after.html

# Removing bcmwl-kernel-source package, then reboot.
sudo apt-get remove --purge bcmwl-kernel-source
sudo reboot

# Installing new broadcom firmware.
sudo apt-get install firmware-b43-installer

# Reaload package.
	# 部置GCStoPubsub function
	gcloud beta functions deploy GCStoPubsub --stage-bucket gs://${STAGING_BUCKET_NAME} --trigger-topic ${UPLOAD_NOTIFICATION_TOPIC} --entry-point GCStoPubsub --runtime=nodejs6

	# 部置visionAPI function
	gcloud beta functions deploy visionAPI --stage-bucket gs://${STAGING_BUCKET_NAME} --trigger-topic visionapiservice --entry-point visionAPI --runtime=nodejs6

	# 部置videoIntelligenceAPI function
	gcloud beta functions deploy videoIntelligenceAPI --stage-bucket gs://${STAGING_BUCKET_NAME} --trigger-topic videointelligenceservice --entry-point videoIntelligenceAPI --timeout 540 --runtime=nodejs6

	# 部置insertIntoBigQuery function
	sed -i "s/\[PROJECT-ID\]/$PROJECT_ID/g" config.json

	sed -i "s/\[FLAGGED_BUCKET_NAME\]/$FLAGGED_BUCKET_NAME/g" config.json

	sed -i "s/\[FILTERED_BUCKET_NAME\]/$FILTERED_BUCKET_NAME/g" config.json

	sed -i "s/\[DATASET_ID\]/$DATASET_ID/g" config.json

	sed -i "s/\[TABLE_NAME\]/$TABLE_NAME/g" config.json
	# 建立4個不同用途的Topics
	gcloud pubsub topics create ${UPLOAD_NOTIFICATION_TOPIC}
	gcloud pubsub topics create visionapiservice
	gcloud pubsub topics create videointelligenceservice
	gcloud pubsub topics create bqinsert

	# 檢查Topics是否正確被建立
	gcloud pubsub topics list
	gsutil mb gs://${IV_BUCKET_NAME}
	gsutil mb gs://${FILTERED_BUCKET_NAME}
	gsutil mb gs://${FLAGGED_BUCKET_NAME}
	gsutil mb gs://${STAGING_BUCKET_NAME}

	# 檢查一下是否有列出4個Bucket
	gsutil ls
	# 取得專案ID
	export PROJECT_ID=$(gcloud info --format='value(config.project)')

	# Cloud Storage buckets的名稱
	export IV_BUCKET_NAME=${PROJECT_ID}-upload
	export FILTERED_BUCKET_NAME=${PROJECT_ID}-filtered
	export FLAGGED_BUCKET_NAME=${PROJECT_ID}-flagged
	export STAGING_BUCKET_NAME=${PROJECT_ID}-staging

	# Cloud Pub/Sub topic環境變數
	# 退出桌面模式，以節省記憶體，不然編譯到一半會有記憶體不足的狀況，造成失敗
	# 你的畫面會進入Console 模式，是正常的
	sudo systemctl isolate multi-user

	# 準備建置原始碼
	yarn

	# 建置原始碼，這個會要花一些時間，約15~20分鐘
	yarn run gulp vscode-linux-arm64-min
	yarn run gulp vscode-linux-arm64-build-deb
	const net = require('net'); // 引入網路 (Net) 模組
	const HOST = '10.10.10.168';
	const PORT = 9100;

	let zpl = `
	^XA
	^FO150,40^BY3
	^BCN,110,Y,N,N
	^FD123456^FS
	^XZ
	# Reference
	# https://ithelp.ithome.com.tw/articles/10192648
	# https://sites.google.com/site/paothsungchen/selflearning/elementaryos/inputchinese

	# Fcitx official https://fcitx-im.org/wiki/Fcitx

	sudo apt install software-properties-common

	＃移除 ibus 框架
	sudo apt remove --purge $(sudo dpkg -l \| grep ibus \| awk '{print $2}' \| grep ^ibus)
	# Reference http://www.linuxlinx.com/2016/08/fix-no-wireless-on-macbook-after.html

	# Removing bcmwl-kernel-source package, then reboot.
	sudo apt-get remove --purge bcmwl-kernel-source
	sudo reboot

	# Installing new broadcom firmware.
	sudo apt-get install firmware-b43-installer

	# Reaload package.